| Antimussol® 4752 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Antimussol® 4752 is a defoaming agent for aqueous formulations. It is an aqueous solution of fatty derivatives with a small polysiloxane component. This white dispersion is used in a wide range of foaming media including: emulsion paints; polymer dispersi...view more Antimussol® 4752 is a defoaming agent for aqueous formulations. It is an aqueous solution of fatty derivatives with a small polysiloxane component. This white dispersion is used in a wide range of foaming media including: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; concrete; works and waste water. view less | |
| Antimussol® 4846N | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Antimussol® 4846N is a defoaming agent for aqueous formulations. It is a mixture of hydrocarbons and fatty acid ethoxylates. Antimussol® 4846N is a combined defoamer/de-aerator with wetting properties. It develops its full efficacy in the acid and alkalin...view more Antimussol® 4846N is a defoaming agent for aqueous formulations. It is a mixture of hydrocarbons and fatty acid ethoxylates. Antimussol® 4846N is a combined defoamer/de-aerator with wetting properties. It develops its full efficacy in the acid and alkaline region. As a product which is free from phosphoric acid esters there is no danger to attack on plastics/rubbers. This product can be pre-diluted with water to a white emulsion. It can also be added in a water spray which is sprayed onto the foaming medium (e.g. to defoam wastewater). When mixing into concentrates Antimussol® 4846N should be added undiluted and stirred until homogeneous. view less | |
| Antimussol® TIP | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Antimussol® TIP is a general-purpose waste water defoamer. It is a mixture of phosphoric acid esters and isobutanol. The defoamer is supplied in ready-to-use form, and no further dilution is necessary. It can also be used as a defoamer for textile deterge...view more Antimussol® TIP is a general-purpose waste water defoamer. It is a mixture of phosphoric acid esters and isobutanol. The defoamer is supplied in ready-to-use form, and no further dilution is necessary. It can also be used as a defoamer for textile detergents. Antimussol® TIP destroys foam produced by the various classes of surfactant. The most effictive method of defoaming is to spray the product onto the foam. view less | |
| Antimussol® TW Liquid | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Antimussol® TW Liquid is a defoaming agent for aqueous formulations. It is a mineral oil-free defoamer based on fatty derivatives. This white, aqueous dispersion is sprayed onto the surface of the foaming medium preferably at points with high liquor turbu...view more Antimussol® TW Liquid is a defoaming agent for aqueous formulations. It is a mineral oil-free defoamer based on fatty derivatives. This white, aqueous dispersion is sprayed onto the surface of the foaming medium preferably at points with high liquor turbulence, either undiluted or diluted up to 1:5 with water. It is suggested for the following applications: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; preferably acid detergent formulations; concrete; works and waste water; and metal processing agents. view less | |
| Antimussol® V 5084 Liquid | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Antimussol® V 5084 Liquid is a defoaming agent for aqueous solutions. It is a mixture of ethoxylated and nitrogen containing components with silica. Antimussol® V 5084 liquid has a good resistance against salts, acids and alkalines. It has a good compatib...view more Antimussol® V 5084 Liquid is a defoaming agent for aqueous solutions. It is a mixture of ethoxylated and nitrogen containing components with silica. Antimussol® V 5084 liquid has a good resistance against salts, acids and alkalines. It has a good compatibility with anionic, nonionic and cationic auxiliaries. This product is suggested for the following applications: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; surfactant formulations; and concrete. view less | |
| Antimussol® V 5348 Liquid | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Antimussol® V 5348 Liquid is a defoaming agent for aqueous solutions. It is a blend of liquid hydrocarbons with silica and fat derivatives. This product is a highly effective liquid defoamer with emulsifying abilities in water. Therefore this defoamer typ...view more Antimussol® V 5348 Liquid is a defoaming agent for aqueous solutions. It is a blend of liquid hydrocarbons with silica and fat derivatives. This product is a highly effective liquid defoamer with emulsifying abilities in water. Therefore this defoamer type is especially suitable for the use in low viscous and and unpigmented systems. Of course Antimussol® V 5348 liquid can also be used in highly filled systems especially when a fast distribution of the defoamer is desired. For manufacturing of emulsions it is necessary to add always the defoamer to the water. This product is typically used in the following applications: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; surfactant formulations; and concrete. view less | |
| Arkopal® N 040 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 040 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 4 Mol EO. This viscous, slightly yellow liquid is most suitable for mineral oils, petroleum and similar aliphatic hydrocarbons. | |
| Arkopal® N 060 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 060 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 6 Mol EO. This viscous, slightly yellow liquid is most suitable for mineral oils, petroleum and similar aliphatic hydrocarbons. | |
| Arkopal® N 080 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 080 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 8 Mol EO. This viscous, slightly yellow liquid is most suitable for aromatic hydrocarbons. | |
| Arkopal® N 090 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 090 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 9 Mol EO. This viscous, slightly yellow liquid is most suitable for aromatic hydrocarbons. | |
| Arkopal® N 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 100 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 10 Mol EO. This viscous, slightly yellow liquid is most suitable for aromatic hydrocarbons. | |
| Arkopal® N 1000 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 1000 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 100 Mol EO. This white up to slightly yellow wax is used as an emulsifier and dispersing agent, and as an emuslifer for bitumen. | |
| Arkopal® N 110 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 110 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 11 Mol EO. This viscous, slightly yellow liquid is most suitable for chlorinated hydrocarbons. | |
| Arkopal® N 130 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 130 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 13 Mol EO. This slightly yellow, pourable paste is most suitable for aromatic hydrocarbons. | |
| Arkopal® N 150 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 150 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 15 Mol EO. This slightly yellow paste is most suitable for chlorinated hydrocarbons. | |
| Arkopal® N 230 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 230 is a nonionic surfactant for the chemical industry. It is composed of Nonylphenolpolyglycolether with 23 Mol EO. Being nonionic, the Arkopal N grades are compatible with all other nonionic, anionic or cationic substances. Electrolytes, for ...view more Arkopal® N 230 is a nonionic surfactant for the chemical industry. It is composed of Nonylphenolpolyglycolether with 23 Mol EO. Being nonionic, the Arkopal N grades are compatible with all other nonionic, anionic or cationic substances. Electrolytes, for example neutral salts, alkalis and – to a lesser extent – acids, reduce the water solubility of the Arkopal N grades and may lead to their salting out, especially at high concentrations and temperatures. This slightly yellow wax is most suitable for fatty acids (olein) and waxes. view less | |
| Arkopal® N 238 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 238 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 23 mole ethylene oxide. Arkopal® N 230 is used in the following applications:as emulsifier in emulsion polymerization; as wax e...view more Arkopal® N 238 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 23 mole ethylene oxide. Arkopal® N 230 is used in the following applications:as emulsifier in emulsion polymerization; as wax emulsifier; for pigment pastes; as stabilizer in paints and coatings. view less | |
| Arkopal® N 300 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 300 is a nonionic surfactant for the chemical industry. It is composed of nonylphenolpolyglycolether with 30 Mol EO. The Arkopal® N grades have excellent resistance to compounds that cause hard water, to metal salts, including those of heavy me...view more Arkopal® N 300 is a nonionic surfactant for the chemical industry. It is composed of nonylphenolpolyglycolether with 30 Mol EO. The Arkopal® N grades have excellent resistance to compounds that cause hard water, to metal salts, including those of heavy metals, acids, alkalis, reductive agents and oxidative agents based on peroxide. This slightly yellow wax is most suitable for fatty acids (olein) and waxes. view less | |
| Arkopal® N 307 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 307 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 30 mole ethylene oxide. This product is used in the following applications: as emulsifier in emulsion polymerization; as wax em...view more Arkopal® N 307 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 30 mole ethylene oxide. This product is used in the following applications: as emulsifier in emulsion polymerization; as wax emulsifier; for pigment pastes; and as stabilizer in paints and coatings. view less | |
| Arkopal® N 308 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopal® N 308 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 30 moleethylene oxide. Arkopal® N 308 is used in the following applications:as emulsifier in emulsion polymerization; as wax em...view more Arkopal® N 308 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 30 moleethylene oxide. Arkopal® N 308 is used in the following applications:as emulsifier in emulsion polymerization; as wax emulsifier; for pigment pastes; as stabilizer in paints and coatings. view less | |
| Arkopon® T Paste 8015 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Arkopon® T Paste 8015 is an anionic emulsifier, wetting and dispersing agent for coating applications. This yellow paste is composed of sodium alkyl methyl tauride. Arkopon® T Paste 8015 is used in pigment preparations for inorganic pigments e.g. for tita...view more Arkopon® T Paste 8015 is an anionic emulsifier, wetting and dispersing agent for coating applications. This yellow paste is composed of sodium alkyl methyl tauride. Arkopon® T Paste 8015 is used in pigment preparations for inorganic pigments e.g. for titanium dioxide. It offers high pigment loads, low viscosity and high tinting strengths. Arkopon® T Paste 8015 improves the compatibility of inorganic and organic pigments in solvent-borne coatings, e.g. long-oil alkyd paints in the presence of aqueous pigment preparations. Arkopon® T Paste 8015 prevents the flocculation of titanium dioxide and the agglomeration of organic pigments. This product is also used for anionic bitumen emulsions. view less | |
| D-FOAM-R C113 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C113 is a 100% active foam control additive formulated for use in water based coatings. It is very well suited for use in synthetic latex based coatings. D-FOAM-R C113 can be used in the either the grind stage or during coating let down. It provi...view more D-FOAM-R C113 is a 100% active foam control additive formulated for use in water based coatings. It is very well suited for use in synthetic latex based coatings. D-FOAM-R C113 can be used in the either the grind stage or during coating let down. It provides excellent, aging stability for rapid bubble break on application. view less | |
| D-FOAM-R C113E | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C113E is a 100% active foam control additive formulated for use in water based coatings. It is very well suited for use in synthetic latex based coatings. It provides excellent aging stability for rapid bubble break on application. D-FOAM-R C113E...view more D-FOAM-R C113E is a 100% active foam control additive formulated for use in water based coatings. It is very well suited for use in synthetic latex based coatings. It provides excellent aging stability for rapid bubble break on application. D-FOAM-R C113E is recommended for use in coating let down. The less dispersible D-FOAM-R C113 is recommended for use in the grind stage. view less | |
| D-FOAM-R C114 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C114 is a 100% active, organic defoamer formulated for use in water based coatings. It provides excellent efficiency and good compatibility in coatings based on a wide variety of synthetic polymers. D-FOAM-R C114 can be used in the either the gri...view more D-FOAM-R C114 is a 100% active, organic defoamer formulated for use in water based coatings. It provides excellent efficiency and good compatibility in coatings based on a wide variety of synthetic polymers. D-FOAM-R C114 can be used in the either the grind stage or during coating let down. view less | |
| D-FOAM-R C114E | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C114E is a 100% active, organic defoamer formulated for use in water based coatings. It provides easy incorporation, excellent efficiency and good compatibility in coatings based on a wide variety of synthetic polymers. D-FOAM-R C114E is generall...view more D-FOAM-R C114E is a 100% active, organic defoamer formulated for use in water based coatings. It provides easy incorporation, excellent efficiency and good compatibility in coatings based on a wide variety of synthetic polymers. D-FOAM-R C114E is generally used in coating let down. The less dispersible D-FOAM-R C114 is recommended for use in the grind stage. view less | |
| D-FOAM-R C117 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C117 is a 100% active, organic defoamer formulated for use in water based coatings. It provides easy incorporation, excellent efficiency and good compatibility in coatings based on a wide variety of synthetic polymers. D-FOAM-R C117 is generally ...view more D-FOAM-R C117 is a 100% active, organic defoamer formulated for use in water based coatings. It provides easy incorporation, excellent efficiency and good compatibility in coatings based on a wide variety of synthetic polymers. D-FOAM-R C117 is generally used in coating let down. view less | |
| D-FOAM-R C330 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C330 is a highly effective, non-silicone foam control additive for water borne inks, coatings and adhesives. It provides easy incorporation and excellent performance in pigment grinding. It can also be used as a “let-down” defoamer in many system...view more D-FOAM-R C330 is a highly effective, non-silicone foam control additive for water borne inks, coatings and adhesives. It provides easy incorporation and excellent performance in pigment grinding. It can also be used as a “let-down” defoamer in many systems. D-FOAM-R C330 is mineral oil free and very low VOC. It is very effective in acrylic, styrene/acrylic, polyvinyl alcohol, vinyl acetate and starch bound coatings and adhesives. view less | |
| D-FOAM-R C740 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C740 is a highly effective silicone containing antifoam that provides easy incorporation and excellent compatibility in water based inks and coatings. D-FOAM-R C740 gives quick knock down and excellent stamina, particularly in high speed, high sh...view more D-FOAM-R C740 is a highly effective silicone containing antifoam that provides easy incorporation and excellent compatibility in water based inks and coatings. D-FOAM-R C740 gives quick knock down and excellent stamina, particularly in high speed, high shear applications. It is very effective for control of microfoam. view less | |
| D-FOAM-R C920 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C920 is a 100% active, silicone antifoam compound that is specially formulated for use in UV, EB and solvent borne inks and coatings. It offers excellent foam and entrained air control in many systems with good compatibility. | |
| Diethylene Glycol Dibutyl Ether | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, ...view more Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, and chlorinated hydrocarbons. It has little to no solubility in water and high molecular weight aliphatic hydrocarbons. DEGDBE is an excellent solvent for a wide range of polar and non-polar substances. Diethylene glycol dibutyl ether is an inert, aprotic solvent. It has wide applicability in various types of cleaning formulations. Examples include grease, wax, and stain removers and special low-flammability non-aqueous cleaning systems for electronic equipment. DEGDBE is used as a solvent for several coatings applications. It is a good coalescing agent with coupling ability. It is also used as solvent for inkjet inks, in formulations of deletion fluids for positive printing plates, retouching agents for lithographic printing and in cleaning agents for removing inks from printing machines. view less | |
| Diethylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chem...view more Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chemical stability and the absence of reactive groups, Diethylene glycol dimethyl ether can be used as an inert reaction medium for many organic and organometallic reactions and for polymerizations. view less | |
| Dipropylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, ap...view more Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, aprotic solvent and can be used in proton sensitive systems. Dipropylene Glycol Dimethyl Ether is not listed as a Hazardous Air Pollutant, has low toxicity, and offers an alternative to solvents being phased out as a result of the Clean Air Act. Due to its chemical stability and the absence of reactive groups, DPGDME can also be used as an inert reaction medium, e. g. for reactions with alkali and alkaline-earth metals (Grignard reactions), polymerizations etc. Dipropylene Glycol Dimethyl Ether is used in solvent-based coatings and water-based polyurethane/ isocyanate coating systems. It is used as environmentally friendly substitute for NMP (N-methyl pyrrolidone) e.g as as coalescing agent in water based polyurethane dispersions. Dipropylene glycol dimethyl ether is also used as a solvent for wood and furniture coatings as well as a solvent for hardeners. view less | |
| Dispersogen® 1728 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigme...view more Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigments. The advantages of Dispersogen® 1728 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. This slightly cloudy, viscous or pasty liquid is composed of an aqueous solution of a novolac derivative. view less | |
| Dispersogen® 2774 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pig...view more Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pigments in aqueous pigment preparations. The advantages of Dispersogen® 2774 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. This yellowish, viscous to pasty liquid is composed of a novolac alkoxylate. view less | |
| Dispersogen® 2774-1 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® 2774-1 is a nonionic dispersing agent for pigments. This yellowish, viscous to pasty liquid is composed of novolac alkoxylate in ethylene glycol. It is suitable for inorganic pigments (metal oxids), carbon black and specially for organic pigm...view more Dispersogen® 2774-1 is a nonionic dispersing agent for pigments. This yellowish, viscous to pasty liquid is composed of novolac alkoxylate in ethylene glycol. It is suitable for inorganic pigments (metal oxids), carbon black and specially for organic pigments (polycylcic and phthalocyanine pigments) that are difficult to disperse in aqueous pigment preparations. The advantages of Dispersogen® 2774-1 are high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® 2774-2 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® 2774-2 is a nonionic dispersing agent for pigments and minerals. This yellowish, viscous liquid is composed of novolac alkoxylate in propylene glycol. Dispersogen® 2774-2 is used as a dispersing agent for aqueous pigment preparations, and it ...view more Dispersogen® 2774-2 is a nonionic dispersing agent for pigments and minerals. This yellowish, viscous liquid is composed of novolac alkoxylate in propylene glycol. Dispersogen® 2774-2 is used as a dispersing agent for aqueous pigment preparations, and it is soluble in organic solvents e.g. ethylene glycol and propylene glycol and compatible with many solvent based preparations. This product is suitable for inorganic pigments, carbon black and especially for organic pigments (polycylcic and phthalocyanine pigments) that are difficult to disperse in aqueous pigment preparations. The advantages of Dispersogen® 2774-2 are high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® 3169 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing...view more Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing inks. It is suitable for inorganic pigments, carbon black and in particular for organic pigments. The advantages of Dispersing® Agent 3169 are high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. view less | |
| Dispersogen® 4387 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable f...view more Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable for inorganic pigments (metal oxids), carbon black and especially for organic pigments (polycylcic and phthalocyanine pigments) that are difficult to disperse. This brown, cloudy liquid is free of any additional biocide, and it is composed of a modified castor oil derivative. The advantages of Dispersogen® 4387 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® ASN Powder | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® ASN Powder is a dispersing agent for the chemical-technological industry. This white powder is composed of ethoxylated higher alcohol. It is a dispersing agent for pigments and pigment preparations. In addition, this product is also applied a...view more Dispersogen® ASN Powder is a dispersing agent for the chemical-technological industry. This white powder is composed of ethoxylated higher alcohol. It is a dispersing agent for pigments and pigment preparations. In addition, this product is also applied as an auxiliary for dyeing and printing of textiles. view less | |
| Dispersogen® LFH | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It...view more Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® LFS | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an an...view more Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an anionic AP-free dispersing agent and used for water-based, solvent-based or water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® UDN | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with hi...view more Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with high solid contents. Dispersogen® UDN is used in emulsion paints to improve compatibility of pigments and minerals with polymers and binders and to enhance the tinting strength of organic pigments. view less | |
| Dodigen® 4131 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dodigen® 4131 is a cationic surfactant for the chemical-technological industry. This colourless to slightly yellow liquid is composed of stearyl dimethyl benzyl ammonium chloride. It is used for manufacturing of organophilic bentonite, antistatic agent. | |
| Dodigen® 4140 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dodigen® 4140 is a quaternary ammonium compound for water treatment. It is used for the clarification of oilfield producted waters, industrial waste and process waters. It is also a demulsifier for used emulsions. This clear, viscous liquid is composed of...view more Dodigen® 4140 is a quaternary ammonium compound for water treatment. It is used for the clarification of oilfield producted waters, industrial waste and process waters. It is also a demulsifier for used emulsions. This clear, viscous liquid is composed of quaternary ammonium polymer. view less | |
| Emulsogen® 3896 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® 3896 is an emulsifier for emulsion polymerization. This pale yellowish wax is composed of oleic alcohol ethoxylate with 20 moles ethylene oxide. It is is used as an emulsifier in emulsion polymerization, particularly in the manufacture of polyv...view more Emulsogen® 3896 is an emulsifier for emulsion polymerization. This pale yellowish wax is composed of oleic alcohol ethoxylate with 20 moles ethylene oxide. It is is used as an emulsifier in emulsion polymerization, particularly in the manufacture of polyvinylacetate homo- and copolymer dispersions. Emulsogen® 3896 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This product can be used in combination with other nonionic and anionic surfactants. view less | |
| Emulsogen® 4084 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyv...view more Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyvinyl acetate, acrylate and styrene/acrylate dispersions to stabilize the rheological behaviour of the polymer dispersions and to improve the electrolyte and shear stability. It can be used in combination with other nonionic, anionic and cationic surfactants. view less | |
| Emulsogen® APG 2019 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® APG 2019 is a copolymerizable anionic emulsifier and hydrophilic monomer for emulsion polymerization. This yellow to brown liquid is composed of allyl phenylpolyol ether sulfate with 20 EO, ammonium salt. It is used as emulsifier and comonomer ...view more Emulsogen® APG 2019 is a copolymerizable anionic emulsifier and hydrophilic monomer for emulsion polymerization. This yellow to brown liquid is composed of allyl phenylpolyol ether sulfate with 20 EO, ammonium salt. It is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate/acrylate emulsions. The advantages of Emulsogen® APG 2019 in comparison to conventional and other reactive emulsifiers are the ability of copolymerization to reduce migration; improved freeze- thaw, electrolyte and shear stability of the polymer emulsion, reduced water sensitivity and water up-take of the polymer film; no additional (non- reactive) emulsifier necessary, stable pre-emulsion for > 24 hrs; and small particle size and narrow particle size distribution. view less | |
| Emulsogen® APS 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® APS 100 is a copolymerizable anionic emulsifier and hydrophilic monomer. It is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions. The advantage...view more Emulsogen® APS 100 is a copolymerizable anionic emulsifier and hydrophilic monomer. It is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions. The advantages of Emulsogen® APS 100 in comparison to conventional emulsifiers are the ability of copolymerisation to reduce migration, improved freeze- thaw, electrolyte and shear stability of the polymer emulsion and reduced water sensitivity and water up-take of the polymer film. view less | |
| Emulsogen® APS 100 S | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® APS 100 S is a copolymerizable anionic emulsifier and hydrophilic monomer for emulsion polymerization. It is composed of allyl polyalkylene glycol (10 EO) ether sulfate, sodium salt. Emulsogen® APS 100 S is used as an emulsifier and comonomer i...view more Emulsogen® APS 100 S is a copolymerizable anionic emulsifier and hydrophilic monomer for emulsion polymerization. It is composed of allyl polyalkylene glycol (10 EO) ether sulfate, sodium salt. Emulsogen® APS 100 S is used as an emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate/acrylate emulsions with low volatile (organic) components. The advantages of Emulsogen® APS 100 S in comparison to conventional emulsifiers are: the ability of copolymerisation to reduce migration; improved freeze- thaw, electrolyte and shear stability of the polymer emulsion; and reduced water sensitivity and water up-take of the polymer film. view less | |
| Emulsogen® DMR | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® DMR is an emulsifier for emulsion thickeners based on mineral oils. This white, waxy flake substance is composed of fatty acid polyethylene glycol phosphoric acid ester. It is used as an emulsifier in mineral oil thickeners. The dosage is about...view more Emulsogen® DMR is an emulsifier for emulsion thickeners based on mineral oils. This white, waxy flake substance is composed of fatty acid polyethylene glycol phosphoric acid ester. It is used as an emulsifier in mineral oil thickeners. The dosage is about 5 – 30 g/l Emulsogen® DMR. Such mineral oil emulsions are used e.g. in textile printing processes together with reactive dyestuffs. Emulsogen® DMR is dissolved in hot water resulting in a 10% stock solution. The stock solution is diluted together with mineral oils (boiling range of 120 to 150°C) and water in dissolvers at 1500 to 2000 rounds per minute. A combination with other thickening systems is also possible, e.g. sodium alginates. view less | |
| Emulsogen® EPA 073 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for pa...view more Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food. view less | |
| Emulsogen® EPA 1954 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled p...view more Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled particle size and low coagulation during the polymerization process. view less | |
| Emulsogen® LA 083 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LA 083 is an anionic emulsifier and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 8 mole ethylene oxide, ammonium salt. This product is readily biodegradable and free of additional preservatives. Emulsogen® L...view more Emulsogen® LA 083 is an anionic emulsifier and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 8 mole ethylene oxide, ammonium salt. This product is readily biodegradable and free of additional preservatives. Emulsogen® LA 083 is used as an emulsifier for emulsion polymerization of vinyl acetate, acrylic acid esters, methacrylic acid esters, styrene and other monomers. This product is also used as a dispersing agent for pigments to produce low viscous, stable pigment dispersions. view less | |
| Emulsogen® LCA 073 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCA 073 is an anionic emulsifier, wetting and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 7 mole ethylene oxide, sodium salt. Emulsogen® LCA 073 is used as an emulsifier for emulsion polymerization of monom...view more Emulsogen® LCA 073 is an anionic emulsifier, wetting and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 7 mole ethylene oxide, sodium salt. Emulsogen® LCA 073 is used as an emulsifier for emulsion polymerization of monomers like styrene, acrylic acid esters, methacrylic acid esters and vinyl acetate. In addition, it is used as a wetting agent for inorganic and organic pigments in preparations. Emulsogen® LCA 073 also produces stable, low foaming emulsions of organic solvents, hydrocarbons, oils and waxes in water. view less | |
| Emulsogen® LCN 050 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCN 050 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 5 mole ethylene oxide. This product contains no additional biocides. Emulsogen® LCN 050 is used as a wetting agent end emulsifi...view more Emulsogen® LCN 050 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 5 mole ethylene oxide. This product contains no additional biocides. Emulsogen® LCN 050 is used as a wetting agent end emulsifier in emulsions, detergents, paints and coatings. view less | |
| Emulsogen® LCN 070 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be ...view more Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be used for the following applications: as wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l; as wetting and dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,5 - 1,0 %; as emulsifier for O/W - emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 %; and as emulsifier for emulsion polymerization in recommended levels of 1 - 2 % based on monomers. view less | |
| Emulsogen® LCN 088 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as...view more Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as a wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l and as a dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,1 - 1,0 %. Emulsogen® LCN 088 is also used as an emulsifier for O/W -emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 % and for emulsion polymerization in recommended levels of 1- 2 % based on monomers. view less | |
| Emulsogen® LCN 118 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte sta...view more Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte stability of polymer dispersions. Emulsogen® LCN 118 is also used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 158 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is use...view more Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 217 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as ...view more Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. This product is also is used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 287 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen®...view more Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen® LCN 287 improves the shear, temperature and electrolyte stability of polymer dispersions. It is used as a dispersing agent for inorganic and organic pigments in aqueous pigment preparations. Emulsogen® LCN 287 is used for aqueous paints and coatings as a dispersing agent and stabilizer to improve the compatibility of pigments with polymers. It prevents skinning of aqueous coatings e.g. in textile coaitngs with emulsion polymers. This product is also used as an emulsifier for aqueous emulsions of alkyd resins. view less | |
| Emulsogen® LCN 407 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving ...view more Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. Emulsogen® LCN 407 can be diluted with water at room temperature without forming a strong gel phase. view less | |
| Emulsogen® LCN 506 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LCN 506 is a nonionic emulsifier for emulsion polymerization. It is composed of alkyl polyethylene glycol ether with 50 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 506 is used a...view more Emulsogen® LCN 506 is a nonionic emulsifier for emulsion polymerization. It is composed of alkyl polyethylene glycol ether with 50 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 506 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It can be diluted with water at room temperature without forming a strong gel phase. view less | |
| Emulsogen® LS | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® LS is an anionic emulsifier for emulsion polymerization. It is composed of C12 - Alkyl sulphate, sodium salt in water. Emulsogen® LS is an anionic emulsifier for emulsion polymerization of e.g. E-PVC, polyvinyl acetate, acrylate and styrene / a...view more Emulsogen® LS is an anionic emulsifier for emulsion polymerization. It is composed of C12 - Alkyl sulphate, sodium salt in water. Emulsogen® LS is an anionic emulsifier for emulsion polymerization of e.g. E-PVC, polyvinyl acetate, acrylate and styrene / acrylate - dispersions. view less | |
| Emulsogen® OLS | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® OLS is an emulsifier and foaming agent composed of disodium oleyl/cetyl sulphosuccinamate. This yellowish, cloudy liquid is used as an emulsifier and foaming agent in carpet backing with styrene / butadiene latices. | |
| Emulsogen® PF 20 S | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentra...view more Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. It can be used in combination with other nonionic and anionic surfactants. Emulsogen® PF 20 S is used as an emulsifier in emulsion polymerization, particularly in the manufacture of acrylate and styrene / acrylate dispersions. view less | |
| Emulsogen® RAL 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® RAL 100 is a nonionic polymerizable emulsifier. This yellowish liquid/paste can be used as a polymerizable emulsifier and a hydrophilic, water soluble monomer in emulsion polymerization. It is soluble in water at 20 °C. | |
| Emulsogen® RAL 109 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® RAL 109 is a nonionic polymerizable emulsifier. This clear, yellowish liquid is composed of allyl polyalkylene glycol ether with 10 mole EO. It can be used as a polymerizable emulsifier and a hydrophilic, water soluble monomer in emulsion polym...view more Emulsogen® RAL 109 is a nonionic polymerizable emulsifier. This clear, yellowish liquid is composed of allyl polyalkylene glycol ether with 10 mole EO. It can be used as a polymerizable emulsifier and a hydrophilic, water soluble monomer in emulsion polymerization. view less | |
| Emulsogen® RAL 208 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® RAL 208 is a nonionic polymerizable emulsifier. This clear, yellowish liquid is composed of allyl polyalkylene glycol ether with 20 mole ethylene oxide. It can be used as a polymerizable emulsifier and a hydrophilic, water soluble monomer in em...view more Emulsogen® RAL 208 is a nonionic polymerizable emulsifier. This clear, yellowish liquid is composed of allyl polyalkylene glycol ether with 20 mole ethylene oxide. It can be used as a polymerizable emulsifier and a hydrophilic, water soluble monomer in emulsion polymerization. view less | |
| Emulsogen® RAL 307 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® RAL 307 is a nonionic polymerizable emulsifier. This clear, yellowish liquid is composed of allyl polyalkylene glycol ether with 30 mole EO. Emulsogen® RAL 307 can be used as a polymerizable emulsifier or a hydrophilic, water soluble monomer in...view more Emulsogen® RAL 307 is a nonionic polymerizable emulsifier. This clear, yellowish liquid is composed of allyl polyalkylene glycol ether with 30 mole EO. Emulsogen® RAL 307 can be used as a polymerizable emulsifier or a hydrophilic, water soluble monomer in emulsion polymerization. view less | |
| Emulsogen® SB 10 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® SB 10 is an anionic wetting agent and emulsifier composed of sodium diisodecyl sulfosuccinate in a solvent mixture. It is used in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions, E-PVC and SBLatex. This pro...view more Emulsogen® SB 10 is an anionic wetting agent and emulsifier composed of sodium diisodecyl sulfosuccinate in a solvent mixture. It is used in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions, E-PVC and SBLatex. This product is also used as a wetting agent in aqueous paints and coatings. view less | |
| Emulsogen® SF 8 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can al...view more Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can also be used as a cake dewatering aide and as a wetting agent for aqueous, VOC-free paints and coatings. view less | |
| Emulsogen® TAS | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TAS is an emulsifier and foaming agent. This yellowish, liquid emulsion is composed of disodium tallow alkyl sulphosuccinamate. Emulsogen® TAS is used as an emulsifier and foaming agent in carpet backing with styrene / butadiene latices. It is ...view more Emulsogen® TAS is an emulsifier and foaming agent. This yellowish, liquid emulsion is composed of disodium tallow alkyl sulphosuccinamate. Emulsogen® TAS is used as an emulsifier and foaming agent in carpet backing with styrene / butadiene latices. It is soluble in water. view less | |
| Emulsogen® TO | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TO is an emulsifier for the chemical-technological industry. This yellow oily liquid is composed of fatty acid ester. It is applied as an emulsifier for mineral oil, O/W and W/O emulsions. | |
| Emulsogen® TS 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TS 100 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 10 moles ethylene oxide. This product is free of any addition...view more Emulsogen® TS 100 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 10 moles ethylene oxide. This product is free of any additional biocide. Emulsogen® TS 100 has a HLB value of about 10 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 100 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents and with low viscosities. It improves the compatibility of pigments and minerals with polymers and binders. This product also improves the shelf life and stability of emulsion paints. view less | |
| Emulsogen® TS 160 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TS 160 is a nonionic wetting and dispersing agent. It has a HLB value of about 13 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 160 is suitable for organic pigments and carbon black to produce st...view more Emulsogen® TS 160 is a nonionic wetting and dispersing agent. It has a HLB value of about 13 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 160 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents and with low viscosities. Emulsogen® TS 160 improves the compatibility of pigments and minerals with polymers and binders. It also improves the shelf life and stability of emulsion paints. This product is free of any additional biocide. view less | |
| Emulsogen® TS 200 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TS 200 is a nonionic dispersing agent and emulsifier. It is is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 200 improves the compatibility of pigment...view more Emulsogen® TS 200 is a nonionic dispersing agent and emulsifier. It is is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 200 improves the compatibility of pigments and minerals with polymers and binders. It also improves shelf life and stability of emulsion paints. view less | |
| Emulsogen® TS 290 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TS 290 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 29 moles ethylene oxide and is free of any additional biocide...view more Emulsogen® TS 290 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 29 moles ethylene oxide and is free of any additional biocide. Emulsogen® TS 290 has a HLB value of about 15 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 290 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. It improves the compatibility of pigments and minerals with polymers and binders. Emulsogen® TS 290 prevents skinning of emulsion polymers in paints and improves the shelf life and stability of emulsion paints. view less | |
| Emulsogen® TS 298 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TS 298 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 29 moles ethylene oxide. This yellowish liquid is free of any...view more Emulsogen® TS 298 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 29 moles ethylene oxide. This yellowish liquid is free of any additional biocide. Emulsogen® TS 298 has a HLB value of about 15 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 298 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. It improves the compatibility of pigments and minerals with polymers and binders. Emulsogen® TS 298 also prevents skinning of emulsion polymers in paints and improves the shelf life and stability of emulsion paints. view less | |
| Emulsogen® TS 407 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TS 407 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. This yellowish liquid is composed of tristyrylphenol-polyglycolether with approximately 40 moles ethylene oxide. It is free of any...view more Emulsogen® TS 407 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. This yellowish liquid is composed of tristyrylphenol-polyglycolether with approximately 40 moles ethylene oxide. It is free of any additional biocide and is used for aqueous pigment preparations, paints and coatings. As a dispersing agent for organic pigments and carbon black, Emulsogen® TS 407 produces stable, free flowing pigment preparations with high solid contents in coatings and paints. It improves the compatibility of pigments and minerals with polymers and binders. This product also improves the shelf life and stability of emulsion paints. view less | |
| Emulsogen® TS 540 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TS 540 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is composed of tristyrylphenol-polyglycolether with approximately 54 moles ethylene glycol. It is free of any a...view more Emulsogen® TS 540 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is composed of tristyrylphenol-polyglycolether with approximately 54 moles ethylene glycol. It is free of any additional biocide and is used for aqueous pigment preparations, paints and coatings. Emulsogen® TS 540 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. This product improves the compatibility of pigments and minerals with polymers and binders. It prevents skinning of emulsion polymers in paints and improves the shelf life and stability of emulsion paints. view less | |
| Emulsogen® TS 600 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, ...view more Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 600 improves the compatibility of pigments and minerals with polymers and binders. It prevents skinning of emulsion polymers in paints and improves the shelf life and stability of emulsion paints. view less | |
| Fluowet® ETC 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Fluowet® ETC 100 is an easy-to-clean coating for ceramics and glass. It is composed of a solution of partially condensated silanes in alcohol. The silanes polymerize and form a polymer coating on silicate surfaces. Water pearls of the coated surface and s...view more Fluowet® ETC 100 is an easy-to-clean coating for ceramics and glass. It is composed of a solution of partially condensated silanes in alcohol. The silanes polymerize and form a polymer coating on silicate surfaces. Water pearls of the coated surface and stains like lime soap can not adhere strongly to the surface. Fluowet® ETC 100 is suitable for ceramic tiles in kitchens, glass doors of shower cabins and ceramic sanitary ware, wash basins and bath tubes. view less | |
| Fluowet® ETC 300 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Fluowet® ETC 300 is a concentrated coating material which is diluted with water and applied on ceramic tiles and sanitary ware to produce hydrophobic and oleophobic coatings with easy-to-clean effects. Water pearls of the coated surface and stains like li...view more Fluowet® ETC 300 is a concentrated coating material which is diluted with water and applied on ceramic tiles and sanitary ware to produce hydrophobic and oleophobic coatings with easy-to-clean effects. Water pearls of the coated surface and stains like lime soap can not adhere strongly to the surface. Easy-to-clean coatings produced from Fluowet® ETC 300 show an aesthetic appearance due to the shape of the water pearls with high contact angles. This product is suitable for ceramic tiles, ceramic sanitary ware, wash basins and bath tubes. The aqueous dilutions from Fluowet® ETC 300 are used for spray coating. view less | |
| Fluowet® FS 600 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Fluowet® FS 600 is a perfluoroalkyl triethyoxysilane raw material for the preparation of easy-to-clean coatings. This clear colourless to pale yellow liquid is used for the synthesis of nanocomposites together with other silanes and partially hydrolysis o...view more Fluowet® FS 600 is a perfluoroalkyl triethyoxysilane raw material for the preparation of easy-to-clean coatings. This clear colourless to pale yellow liquid is used for the synthesis of nanocomposites together with other silanes and partially hydrolysis of the silanes to produce reactive condensates. The perfluoroalkyl chain of Fluowet® FS 600 contributes to the hydrophobic and oleophobic effect of the coating. Water pearls of the coated surface and stains like lime soap can not adhere strongly to the surface. Suitable applications for easy-to-clean coatings are: ceramic tiles in kitchens; glass doors of shower cabins; ceramic sanitary ware, wash basins and bath tubes; metals and metal oxide surfaces; wood and paper; paint and coatings; and plastics and polymers. view less | |
| Fluowet® FS 612 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Fluowet® FS 612 is a perfluoro alkylethyl triethoxy silane raw material for the preparation of easy-to-clean coatings. This clear colourless to pale yellow liquid is used for the synthesis of nanocomposites together with other silanes and partially hydrol...view more Fluowet® FS 612 is a perfluoro alkylethyl triethoxy silane raw material for the preparation of easy-to-clean coatings. This clear colourless to pale yellow liquid is used for the synthesis of nanocomposites together with other silanes and partially hydrolysis of the silanes to produce reactive condensates. The perfluoroalkyl chain of Fluowet® FS 612 contributes to the hydrophobic and oleophobic effect of the coating. Water pearls of the coated surface and stains like lime soap can not adhere strongly to the surface. Suitable applications for easy-to-clean coatings are: ceramic tiles in kitchens; glass doors of shower cabins; ceramic sanitary ware, wash basins and bath tubes; metals and metal oxide surfaces; wood and paper; paint and coatings; and plastics and polymers. view less | |
| Genagen® C 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genagen® C 100 is a nonionic emulsifier for the chemical industry. This colourless liquid is composed of coconut fatty acid polyethylene glycol ester with 10 moles ethylene oxide. Genagen® C 100 is resistant to water hardness salts and can be used in comb...view more Genagen® C 100 is a nonionic emulsifier for the chemical industry. This colourless liquid is composed of coconut fatty acid polyethylene glycol ester with 10 moles ethylene oxide. Genagen® C 100 is resistant to water hardness salts and can be used in combination with other nonionic, anionic and cationic surfactants. view less | |
| Genagen® CG 200 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genagen® CG 200 is an additive for the polyester industry. This slightly yellow liquid is composed of cocos fatty acid polyglycol ester. Genagen® CG 200 is resistant to water hardness salts and can be used in combination with other nonionic, anionic and c...view more Genagen® CG 200 is an additive for the polyester industry. This slightly yellow liquid is composed of cocos fatty acid polyglycol ester. Genagen® CG 200 is resistant to water hardness salts and can be used in combination with other nonionic, anionic and cationic surfactants. view less | |
| Genagen® COA | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genagen® COA is a new non-VOC coalescing agent for the effective reduction of minimal film formation temperature (MFFT) without impacting viscosity. Label-free and for all kinds of paints binders used in diverse decorative coatings applications. | |
| Genamin® 10 R 200 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 10 R 200 D is a raw material for the chemical-technological industry. This slightly yellow paste is composed of didecyl amine, distilled. It is a starting material for quaternary ammonium compounds. | |
| Genamin® 10 R 301 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 10 R 301 D is a raw material for the chemical-technological industry. This yellowish liquid is composed of didecyl methyl amine, distilled. It is a starting material for quaternary ammonium compounds. | |
| Genamin® 12 R 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 12 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, ...view more Genamin® 12 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. The basicity of the dimethyl fatty amines is slightly less marked than that of primary and secondary fatty amines. view less | |
| Genamin® 14 R 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 14 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, ...view more Genamin® 14 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. The basicity of the dimethyl fatty amines is slightly less marked than that of primary and secondary fatty amines. view less | |
| Genamin® 16 R 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 16 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, ...view more Genamin® 16 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. The basicity of the dimethyl fatty amines is slightly less marked than that of primary and secondary fatty amines. view less | |
| Genamin® 18 R 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 18 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, ...view more Genamin® 18 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. The basicity of the dimethyl fatty amines is slightly less marked than that of primary and secondary fatty amines. view less | |
| Genamin® 20/22 R 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 20/22 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oi...view more Genamin® 20/22 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. The basicity of the dimethyl fatty amines is slightly less marked than that of primary and secondary fatty amines. view less | |
| Genamin® 3119 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 3119 is a cationic surfactant for the chemical-technological industry. It is also used as a dispersing agent. This light brown liquid is composed of N-Tallow alkyl N,N-Bis-(3-aminopropyl)-amine. | |
| Genamin® 8 R 200 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 8 R 200 D is a starting material for quaternary ammonium compounds. This colourless to slightly yellow liquid/paste is composed of dioctyl amine, distilled. | |
| Genamin® 8 R 300 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 8 R 300 D is a raw material for the chemical-technological industry. This colourless to slightly yellow liquid is composed of tri-n-octyl amine, destilled. This product is insoluble in water and soluble in organic solvents or in diluted aqueous a...view more Genamin® 8 R 300 D is a raw material for the chemical-technological industry. This colourless to slightly yellow liquid is composed of tri-n-octyl amine, destilled. This product is insoluble in water and soluble in organic solvents or in diluted aqueous acids (accompanied by salt formation). view less | |
| Genamin® 8/10 R 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® 8/10 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty, waterinsoluble bases. They are readily soluble in organic solvents such as mineral oil...view more Genamin® 8/10 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty, waterinsoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. The basicity of the dimethyl fatty amines is slightly less marked than that of primary and secondary fatty amines. view less |
