YURON CP 20 is composed of chlorinated polyolefin and is supplied as a white powder that is immiscible in water. This product is recommended as a binder for plastic or steel coatings.
Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good...view more
Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good acid and alkali resistance, weather resistance, water resistance, oil resistance, cold resistance and flame resistance. It also has good compatibility with most resins such as alkyd resin, acrylic resin, chlorinated rubber resin and high chlorinated polyethylene resin. view less
Chlorinated Rubber-YURON CR 10 is a binder for anti-corrosion coatings and a combination binder for alkyd and acrylic resins. It has a viscosity of 8-13 mpa.s at 25°C.
Chlorinated Rubber-YURON CR 20 is a binder for anti-corrosion coatings and a combination binder for alkyd and acrylic resins. It has a viscosity of 13-18 mpa.s at 25°C.
YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most est...view more
YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. view less
YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in...view more
YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in most esters. view less
YURON CR-22 is a chlorinated rubber product supplied as a white powder. It is mainly added to solventborne contact adhesives. It is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters.
YURON CR-40 is a chlorinated rubber supplied in the form of a white powder. It is used as a binder for anti-corrosion coatings and adhesives. This product is also recommended as a combination binder for alkyd resins and adhesive resins.
YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most ester...view more
YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most esters. view less
YURON CR-90 is chlorinated rubber, supplied as a white powder that is immiscible in water. It is recommended as a binder for anti-corrosion coatings and adhesives and as a combination binder for alkyd resins and acrylic resins.
EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...view more
EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. view less
EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more
EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less
EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more
EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less
EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...view more
EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. view less
EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...view more
EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. view less
EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...view more
EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. view less
EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...view more
EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. view less
EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...view more
EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. view less
EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...view more
EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. view less
EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...view more
EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. view less
High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance an...view more
High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas.
HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less
High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance ...view more
High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas.
HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less
High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more
High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less
YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coating...view more
YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coatings and high quality printing ink. view less
High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more
High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less
High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more
High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less
This formulation is used as the first coating on ships or steel construction. It has excellent water and corrosion resistance with outstanding durability.
This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rub...view more
This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rubber primer or aqueous phase chlorinated rubber aluminum primer. view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.
