| Adherant 1051 | Elementis 海名斯特殊化学 | Adherant 1051 is a solvent that can improve adhesion of organic resins to inorganic surfaces. For use as a primer, 49.5 parts of Adherant 1051 and 0.5 parts of an organic amine are diluted with about 950 parts methanol, isopropanol or ether glycol. Altern...view more Adherant 1051 is a solvent that can improve adhesion of organic resins to inorganic surfaces. For use as a primer, 49.5 parts of Adherant 1051 and 0.5 parts of an organic amine are diluted with about 950 parts methanol, isopropanol or ether glycol. Alternatively, a prehydrolyzed primer may be prepared by adding 5 parts water and 1,000 parts of the above primer solution. In both cases, the primer solution is applied to a solid surface such as glass or metal and a polymer is heat pressed or cured on the surface. view less | Request Sample |
| Adherant 1121 | Elementis 海名斯特殊化学 | Adherant 1121 is an adhesion promoter for solvent-based air-dry paints in glass and metal substrates. Adherant 1121 reacts to isocyanate and phenolic aldehyde amine systems curing agent. Please check the curing agent type before use, to avoid products gel...view more Adherant 1121 is an adhesion promoter for solvent-based air-dry paints in glass and metal substrates. Adherant 1121 reacts to isocyanate and phenolic aldehyde amine systems curing agent. Please check the curing agent type before use, to avoid products gel. view less | Request Sample |
| Adherant ADK | Elementis 海名斯特殊化学 | Adherant ADK is a solvent used to enhance composite ink on PET. | Request Sample |
| Adherant ADP | Elementis 海名斯特殊化学 | Adherant ADP is a solvent additive used to improve adhesion of paint film especially on non-ferrous substrates. It is used to promote adhesion of stoving paints on difficult non-ferrous substrates such as aluminum, zinc, copper, brass, electroplated stee...view more Adherant ADP is a solvent additive used to improve adhesion of paint film especially on non-ferrous substrates. It is used to promote adhesion of stoving paints on difficult non-ferrous substrates such as aluminum, zinc, copper, brass, electroplated steel etc., to improve the flexibility and impact resistance of paint film, and is thermo-stable so that it does not discolor at elevated temperature. No side-effect of shelf-life. view less | Request Sample |
| Adherant APC | Elementis 海名斯特殊化学 | Adherant APC is a solvent added into two-component polyurethane coatings can increase Into the coating of polycarbonate (PC) The adhesion of the plastic. Composition is a non-silicone polymer. | Request Sample |
| Adherant APW | Elementis 海名斯特殊化学 | Adherant APW is a solvent additive used to improve adhesion to the surface of metal pigment on the paint film. Apparently improve the interaction force of aluminium flakes with binder. It can combine with acrylic or alkyd of baking paints to improve flexi...view more Adherant APW is a solvent additive used to improve adhesion to the surface of metal pigment on the paint film. Apparently improve the interaction force of aluminium flakes with binder. It can combine with acrylic or alkyd of baking paints to improve flexibility and resistance of paint film to improve intercoat adhesion. view less | Request Sample |
| Adherant CP-7540 | Elementis 海名斯特殊化学 | Adherant CP-7540 is chlorinated polyolefin-modified solvent acrylic resin, a widely used PP substrate as an adhesion primer to enhance the coating on PP substrate adhesion. | Request Sample |
| Adherant PLH | Elementis 海名斯特殊化学 | Adherant PLH promotes surface adhesion on non-ferrous metal surfaces. It can be added to baking primers or paints. | Request Sample |
| Adherant PPB | Elementis 海名斯特殊化学 | Adherant PPB is a solvent additive which improves adhesion to non-treated polypropylene of PP / EPDM plastics. | Request Sample |
| BARAGEL® | Elementis 海名斯特殊化学 | BARAGEL® rheological additive is a gellent for a wide range of mineral oils, synthetic, and other organic fluids of medium to low polarity. It can be readily blended into oils and fluids using normal grease equipment. The product produced must be sheared ...view more BARAGEL® rheological additive is a gellent for a wide range of mineral oils, synthetic, and other organic fluids of medium to low polarity. It can be readily blended into oils and fluids using normal grease equipment. The product produced must be sheared through a colloid mill or homogenizer to obtain maximum yield. view less | Request Sample |
| BARAGEL® 10 | Elementis 海名斯特殊化学 | BARAGEL® 10 rheological additive is a novel, environmentally friendly organoclay gallant designed specifically for the vegetable oil-based grease and lubricant markets. It works effectively in a wide variety of vegetable oils in addition to synthetic este...view more BARAGEL® 10 rheological additive is a novel, environmentally friendly organoclay gallant designed specifically for the vegetable oil-based grease and lubricant markets. It works effectively in a wide variety of vegetable oils in addition to synthetic esters and some conventional petroleum-based oils. Produced from refined and processed naturally occurring organic and inorganic materials, It is an environmentally friendly material. view less | Request Sample |
| BARAGEL® 20 | Elementis 海名斯特殊化学 | BARAGEL® 20 rheological additive is an organic derivative of a smectite clay and is designed for medium to low polarity systems. It is suitable for medium to high V.I. mineral oils, synthetic hydrocarbon fluids, such as poly-alpha-olefins, and vegetable o...view more BARAGEL® 20 rheological additive is an organic derivative of a smectite clay and is designed for medium to low polarity systems. It is suitable for medium to high V.I. mineral oils, synthetic hydrocarbon fluids, such as poly-alpha-olefins, and vegetable oils. view less | Request Sample |
| BARAGEL® 24 | Elementis 海名斯特殊化学 | BARAGEL® 24 rheological additive is an organic derivative of a special smectite clay. It is specifically designed to improve thickening efficiency in synthetic and other organic fluids of medium- to high-polarity. | Request Sample |
| BARAGEL® 3000 | Elementis 海名斯特殊化学 | BARAGEL® 3000 rheological additive is a self activating organoclay grease gellant for thickening medium- to high-viscosity-index mineral oils, synthetic oils and other organic fluids. It is easy to disperse and suitable for lubricating greases based on me...view more BARAGEL® 3000 rheological additive is a self activating organoclay grease gellant for thickening medium- to high-viscosity-index mineral oils, synthetic oils and other organic fluids. It is easy to disperse and suitable for lubricating greases based on medium- to high- VI paraffinic oils, synthetic oils and other organic fluids. Many of these greases are used in mining, farming, metal refining and military applications. view less | Request Sample |
| BENAQUA® 4000 | Elementis 海名斯特殊化学 | Benaqua® 4000 rheological additive is an easily dispersible powder designed for lower-gloss and matt latex paints, textured and high-build coatings and aqueous adhesives. It is especially useful in systems that are diluted with water prior to use. | Request Sample |
| BENAQUA® 5000 | Elementis 海名斯特殊化学 | BENAQUA® 5000 rheological additive is an easily dispersible powder designed for tile mortars, textured and high-build coatings, stucco, and water-borne adhesives. It is especially useful in dry systems where water is added before use. | Request Sample |
| BENATHIX® | Elementis 海名斯特殊化学 | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...view more BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. view less | Request Sample |
| BENGEL® 434 | Elementis 海名斯特殊化学 | BENGEL® 434 rheological additive is a general purpose solvent organoclay (tetra-alkyl ammonium bentonite) designed for low to medium polarity aliphatic and aromatic coating systems. It also works fine in selective high polarity systems. | Request Sample |
| BENGEL® 62 | Elementis 海名斯特殊化学 | BENGEL® 62 rheological additive is a cost-effective organo bentonite viscosifier and suspending agent for oil-based drilling fluids, invert emulsion drilling fluids, and packer fluids. | Request Sample |
| BENGEL® 62E | Elementis 海名斯特殊化学 | BENGEL® 62E rheological additive is our most cost-effective organo bentonite viscosifier and suspending agent for oil-based invert emulsion drilling fluids. | Request Sample |
| BENGEL® 818 | Elementis 海名斯特殊化学 | BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufac...view more BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufacturing process. view less | Request Sample |
| BENGEL® 828 | Elementis 海名斯特殊化学 | BENGEL® 828 is a rheological additive greatly simplifies the formulation and manufacture of paint systems contain moderate to high polarity solvents such as ketones, esters, glycol ethers, ether esters, alcohol. | Request Sample |
| BENGEL® 908 | Elementis 海名斯特殊化学 | BENGEL® 908 rheological additive is a general purpose solvent organoclay designed for low to medium polarity aliphatic and aromatic coating systems. It also works well in other high polarity systems. | Request Sample |
| BENGEL® 958 | Elementis 海名斯特殊化学 | BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufactu...view more BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufacturing procedures. view less | Request Sample |
| BENGEL® 968 | Elementis 海名斯特殊化学 | BENGEL® 968 rheological additive is a general-purpose organic bentonite designed for low to medium-polarity coating systems. It can be used for versatile coating applications and provides good compatibility, viscosity increase as well as anti-settling pro...view more BENGEL® 968 rheological additive is a general-purpose organic bentonite designed for low to medium-polarity coating systems. It can be used for versatile coating applications and provides good compatibility, viscosity increase as well as anti-settling properties. view less | Request Sample |
| BENGEL® 988 | Elementis 海名斯特殊化学 | BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate ...view more BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate and can be added dry to the pigment grinding process without chemical activator or the preparation of a pregel. view less | Request Sample |
| BENTONE® 1000 | Elementis 海名斯特殊化学 | BENTONE® 1000 has high-performance dispersion characteristics and suitable for low to medium polarity organic solvent coating system of the organic Bentonite additives. | Request Sample |
| BENTONE® 108 | Elementis 海名斯特殊化学 | BENTONE® 108 is an aliphatic quat derivative of a hectorite clay. This highly efficient additive is designed for low to intermediate-polarity organic systems. | Request Sample |
| BENTONE® 128 | Elementis 海名斯特殊化学 | BENTONE® 128 rheological additive is a special organically modified montmorillonite clay designed for non-polar printing inks based on naphthenic and paraffinic solvents and oils. It will also gel inks containing solvents of intermediate polarity. | Request Sample |
| BENTONE® 150 | Elementis 海名斯特殊化学 | BENTONE® 150 rheological additive is an easy dispersing, self-activating organoclay that exhibits high-performance efficiency in diesel, low aromatic mineral oil, poly, linear, and isomerized alpha olefins, and modified vegetable oil containing base fluid...view more BENTONE® 150 rheological additive is an easy dispersing, self-activating organoclay that exhibits high-performance efficiency in diesel, low aromatic mineral oil, poly, linear, and isomerized alpha olefins, and modified vegetable oil containing base fluid formulations. It is highly effective in all-oil and invert muds, fracture, and workover fluids. view less | Request Sample |
| BENTONE® 155 | Elementis 海名斯特殊化学 | BENTONE® 155 rheological additive is a high efficiency, moderate temperature performance organo-clay offering exceptionally rapid yield development. This feature makes it an ideal additive for mud plants having low-shear mixing equipment. BENTONE® 155 pre...view more BENTONE® 155 rheological additive is a high efficiency, moderate temperature performance organo-clay offering exceptionally rapid yield development. This feature makes it an ideal additive for mud plants having low-shear mixing equipment. BENTONE® 155 prevents weighting agent settling in storage and transit to the well site. view less | Request Sample |
| BENTONE® 27 | Elementis 海名斯特殊化学 | BENTONE® 27 rheological additive is an organic solvent derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | Request Sample |
| BENTONE® 34 | Elementis 海名斯特殊化学 | BENTONE® 34 is an organic solvent derivative of a bentonite clay. This rheological additive is designed for low to intermediate polarity organic systems. | Request Sample |
| BENTONE® 34 GG | Elementis 海名斯特殊化学 | BENTONE® 34 GG rheological additive is a gellant for a wide range of mineral oils, synthetic and other organic fluids of medium to low polarity. | Request Sample |
| BENTONE® 38 | Elementis 海名斯特殊化学 | BENTONE® 38 is an organic solvent derivative of a hectorite clay. This highly efficient rheological additive is designed for low to intermediate polarity organic systems. | Request Sample |
| BENTONE® 42 | Elementis 海名斯特殊化学 | BENTONE® 42 was designed to build gel strength and viscosity in synthetic-based invert emulsion drilling fluids and maintain this viscosity build through extreme temperatures. It is a specially designed organo-clay that was chemically engineered to mainta...view more BENTONE® 42 was designed to build gel strength and viscosity in synthetic-based invert emulsion drilling fluids and maintain this viscosity build through extreme temperatures. It is a specially designed organo-clay that was chemically engineered to maintain product performance when subjected to temperatures as high as 450ºF for as long as 600 hours. Additionally, as temperature increases, the viscosity at temperature remains flat. This flat rheology over temperature minimizes the tendency for barite sag while improving cutting transport and hole cleaning. BENTONE® 42 exhibits an excellent balance of dispersibility with initial viscosity build, efficiency, and tolerance to adverse conditions for reduced depletion rates. view less | Request Sample |
| BENTONE® 52 | Elementis 海名斯特殊化学 | BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coa...view more BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coatings systems. view less | Request Sample |
| BENTONE® 54 | Elementis 海名斯特殊化学 | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...view more BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. view less | Request Sample |
| BENTONE® 54K | Elementis 海名斯特殊化学 | BENTONE® 54K is an organic derivative of bentonite clay. This rheological additive is designed for low to intermediate-polarity organic systems. | Request Sample |
| BENTONE® 57 | Elementis 海名斯特殊化学 | BENTONE® 57 is an organic solventborne derivative of bentonite clay. This highly efficient and cost-effective rheological additive is designed for high-polarity organic systems. | Request Sample |
| BENTONE® 910 | Elementis 海名斯特殊化学 | BENTONE® 910 rheological additive is an economical organobentonite viscosifier and suspending agent for oil-based muds, invert emulsion muds, completion fluids, and workover fluids. This viscosifier employs the composition most widely used through the yea...view more BENTONE® 910 rheological additive is an economical organobentonite viscosifier and suspending agent for oil-based muds, invert emulsion muds, completion fluids, and workover fluids. This viscosifier employs the composition most widely used through the years in oil-based muds, in a cost-effective economy form. BENTONE® 910 is suitable for drilling fluids based on diesel oil and mineral oil. It adds to the formulation of the temperature-stable rheology characteristic of organo-clays. view less | Request Sample |
| BENTONE® 920 | Elementis 海名斯特殊化学 | BENTONE® 920 rheological additive is an easy-to-disperse, rapid-yielding, economical organobentonite viscosifier for oil-based muds, inverted emulsion muds, completion fluids, and workover fluids. BENTONE® 920's unique composition delivers a dry process g...view more BENTONE® 920 rheological additive is an easy-to-disperse, rapid-yielding, economical organobentonite viscosifier for oil-based muds, inverted emulsion muds, completion fluids, and workover fluids. BENTONE® 920's unique composition delivers a dry process gellant that requires less time and shear to build full rheology in drilling fluids, and that yields at low field temperatures. BENTONE® 920 is also significantly more efficient in mineral oils and alpha olefins than conventional organoclay viscosifiers. BENTONE® 920 is suitable for drilling fluids based on mineral and other low toxicity oils, and synthetics, as well as diesel and crude oils. view less | Request Sample |
| BENTONE® 990 | Elementis 海名斯特殊化学 | BENTONE® 990 rheological additive is an organophilic amino-attapulgite that controls the settling of solids in oil-based drilling muds and other drilling fluids. BENTONE® 990's unique rheological structure suspends weighting materials and other solids wit...view more BENTONE® 990 rheological additive is an organophilic amino-attapulgite that controls the settling of solids in oil-based drilling muds and other drilling fluids. BENTONE® 990's unique rheological structure suspends weighting materials and other solids with less increase in viscosity and gel strength than conventional bentonite or hectorite-based organoclays. This allows the formulation of low-viscosity muds with undiminished penetration rates and cuttings removal. BENTONE® 990 can be used alone or in combination with conventional organoclay gellants. The solids suspension capacity of a fluid that is already thickened with an organoclay can be increased by the addition of BENTONE® 990, without substantially increasing the viscosity of the system. view less | Request Sample |
| BENTONE® AD | Elementis 海名斯特殊化学 | BENTONE® AD rheological additive is an easily dispersible, highly refined hectorite. It has been developed for water-borne automotive base-coats and general industrial systems. It is particularly suitable for metallic-pigmented paints. It provides a shear...view more BENTONE® AD rheological additive is an easily dispersible, highly refined hectorite. It has been developed for water-borne automotive base-coats and general industrial systems. It is particularly suitable for metallic-pigmented paints. It provides a shear-thinning viscosity, exceptional anti-settling, and sag control, across a wide range of application temperatures, without increasing the mid-shear-rate viscosity significantly. It imparts excellent spraying properties and aluminum pigment alignment. Its controlled particle size gives a smooth film appearance and does not impair gloss. view less | Request Sample |
| BENTONE® CRS | Elementis 海名斯特殊化学 | BENTONE® CRS rheological additive is an easily dispersible powder designed for tiles, glazes, ceramic inks, and advanced ceramic production. It has a base of smectite hectorite clay and low magnetics content. | Request Sample |
| BENTONE® CT | Elementis 海名斯特殊化学 | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...view more BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. view less | Request Sample |
| BENTONE® DE | Elementis 海名斯特殊化学 | BENTONE® DE additive is a highly beneficiated, hyperdispersible aqueous powdered hectorite clay. | Request Sample |
| BENTONE® DY | Elementis 海名斯特殊化学 | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| BENTONE® DY CE | Elementis 海名斯特殊化学 | BENTONE® DY CE additive is an organically modified powdered clay product specially designed for aqueous systems; primarily interior, decorative latex paints. | Request Sample |
| BENTONE® EW NA | Elementis 海名斯特殊化学 | BENTONE® EW NA is a highly beneficiated, easily dispersible waterborne powdered smectite clay. | Request Sample |
| BENTONE® GS | Elementis 海名斯特殊化学 | BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and ...view more BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and concrete. view less | Request Sample |
| BENTONE® HC | Elementis 海名斯特殊化学 | BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions ...view more BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions of refined hectorite that develop their full viscosity in the final filled system. view less | Request Sample |
| BENTONE® HD | Elementis 海名斯特殊化学 | BENTONE® HD is a highly refined, ultra-dispersible hectorite clay used as a thickener. | Request Sample |
| BENTONE® LT | Elementis 海名斯特殊化学 | BENTONE® LT additive is an organically modified powdered clay additive designed for aqueous systems, primarily latex paints. | Request Sample |
| BENTONE® MA | Elementis 海名斯特殊化学 | BENTONE® MA is a rheological additive based on a purified hectorite clay that imparts thixotropy and good anti-settling properties to water-borne systems. | Request Sample |
| BENTONE® NP-10 | Elementis 海名斯特殊化学 | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | Request Sample |
| BENTONE® OC | Elementis 海名斯特殊化学 | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | Request Sample |
| BENTONE SD® -1 | Elementis 海名斯特殊化学 | BENTONE SD®-1 rheological additive is an organic derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium-polarity solvents. | Request Sample |
| BENTONE SD® -2 | Elementis 海名斯特殊化学 | BENTONE SD®-2 rheological additive is an organic derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols. | Request Sample |
| BENTONE SD®-3 | Elementis 海名斯特殊化学 | BENTONE SD®-3 rheological additive is a modified bentonite organoclay for solventborne medium polarity aliphatic and aromatic paint and coating systems. BENTONE SD®-3 provides stable viscosity, controls sag and suspends pigments. | Request Sample |
| BENTONE® WBS | Elementis 海名斯特殊化学 | BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, im...view more BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, improves workability, and is compatible with other thickeners. This product is recommended for waterborne decorative latex paints and similar systems, gypsum plasters, and buiding materials such as mortars and renderings based on lime, cement, and gypsum. view less | Request Sample |
| Catacure KB | Elementis 海名斯特殊化学 | Catacure KB is a solvent curing catalyst used in butylated melamine baking paint. | Request Sample |
| Catacure KC | Elementis 海名斯特殊化学 | Catacure KC is a blocked solvent curing catalyst used in baking paints especially for fully alkylated melamines which need strong catalyst. It can either lower baking temperature or shorten baking time. | Request Sample |
| Catacure KL | Elementis 海名斯特殊化学 | Catacure KL is a solvent curing accelerator, suitable for a high efficiency of polyurethane and polyurethane coatings, adhesives and sealant. | Request Sample |
| Catacure TIN-22 | Elementis 海名斯特殊化学 | Catacure TIN-22 is a solvent accelerator for high performance tin which applies to polyurethane coatings. | Request Sample |
| DAPRO® ACP-16W | Elementis 海名斯特殊化学 | DAPRO® ACP-16W is a waterborne adhesion promoter. It is designed for improving adhesion of waterborne coatings and inks on polypropylene (PP) substrates. | Request Sample |
| DAPRO® AP 1622 | Elementis 海名斯特殊化学 | DAPRO® AP 1622 is a silicone modified liquid defoamer for use in solvent systems. | Request Sample |
| DAPRO® AP 7010 | Elementis 海名斯特殊化学 | DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsio...view more DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsions and emulsion paints. view less | Request Sample |
| DAPRO® AP 7010S | Elementis 海名斯特殊化学 | DAPRO® AP 7010S is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. | Request Sample |
| DAPRO® AP 7015 | Elementis 海名斯特殊化学 | DAPRO® AP 7015 is a defoamer for waterborne systems with very good emulsifying properties. It has excellent anti-foaming and de-foaming effects. It is specially recommended for systems with poor emulsifying properties such as latex paints, pigment disper...view more DAPRO® AP 7015 is a defoamer for waterborne systems with very good emulsifying properties. It has excellent anti-foaming and de-foaming effects. It is specially recommended for systems with poor emulsifying properties such as latex paints, pigment dispersions, adhesives, inks, other aqueous systems with poor emulsifying properties dispersions and so on. view less | Request Sample |
| DAPRO® AP 7015S | Elementis 海名斯特殊化学 | DAPRO® AP 7015S is a defoamer for waterborne systems with very good emulsifying properties. It has excellent anti-foaming and de-foaming effects. | Request Sample |
| DAPRO® AP 7072 | Elementis 海名斯特殊化学 | DAPRO® AP 7072 is an aqueous defoamer for high-quality rubber applications. It offers excellent foam suppression and defoaming properties. This product is easily dispersed in water, and is therefore suitable for the preparation of architectural coatings, ...view more DAPRO® AP 7072 is an aqueous defoamer for high-quality rubber applications. It offers excellent foam suppression and defoaming properties. This product is easily dispersed in water, and is therefore suitable for the preparation of architectural coatings, adhesive, ink and other water-based emulsion systems. view less | Request Sample |
| DAPRO® BEZ 75 | Elementis 海名斯特殊化学 | DAPRO® BEZ 75 is used in non-aqueous coatings as an effective auxiliary solvent to fight settling and sagging. It is particularly useful in aromatic-free formulations. | Request Sample |
| DAPRO® BIO 9910 | Elementis 海名斯特殊化学 | DAPRO® BIO 9910 is a liquid vegetable oil-based defoamer, for universal waterborne applications. The product shows excellent compatibility, fast defoaming performance, and very good long-term efficiency. | Request Sample |
| DAPRO® DF 21 | Elementis 海名斯特殊化学 | DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and c...view more DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and clear acrylic coatings. view less | Request Sample |
| DAPRO® DF 307 | Elementis 海名斯特殊化学 | DAPRO® DF 307 is a water-dispersible defoamer for water-based inks and decorative coatings. It is suited for use in gloss paints and clear acrylic coatings. | Request Sample |
| DAPRO® DF 677 | Elementis 海名斯特殊化学 | DAPRO® DF 677 is a high performance defoamer. It is recommended for aqueous inks. | Request Sample |
| DAPRO® DF 696 | Elementis 海名斯特殊化学 | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...view more DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. view less | Request Sample |
| DAPRO® DF 7005 | Elementis 海名斯特殊化学 | DAPRO® DF 7005 is a silicone free liquid defoamer, economical in use, for universal aqueous applications. The product shows very good long-term efficiency. | Request Sample |
| DAPRO® DF 7073 | Elementis 海名斯特殊化学 | DAPRO® DF 7073 is a water-dispersible foam control agent for architectural coatings applications. It is widely used in high PVC paint system at low concentrations to provide fast-breaking foam properties. This product imparts mild gloss and no impact resi...view more DAPRO® DF 7073 is a water-dispersible foam control agent for architectural coatings applications. It is widely used in high PVC paint system at low concentrations to provide fast-breaking foam properties. This product imparts mild gloss and no impact resistance. view less | Request Sample |
| DAPRO® DF 7079 | Elementis 海名斯特殊化学 | DAPRO® DF 7079 is an aqueous defoamer for VOC-free water-based architectural coatings. It can be used in coatings and paints and paint in the grinding stage. This defoamer imparts excellent foam control. At low dosage, this product provides particularly e...view more DAPRO® DF 7079 is an aqueous defoamer for VOC-free water-based architectural coatings. It can be used in coatings and paints and paint in the grinding stage. This defoamer imparts excellent foam control. At low dosage, this product provides particularly effective quick foam breaking performance for matte and high gloss coatings. view less | Request Sample |
| DAPRO® DF 7160 | Elementis 海名斯特殊化学 | DAPRO® DF 7160 is a special design, easy dispersible defoamer for pressure sensitive adhesive, latex synthesis, and ink application with excellent antifoam and defoaming performance. DAPRO® DF 7160 shows excellent foam control , less microfoam and increas...view more DAPRO® DF 7160 is a special design, easy dispersible defoamer for pressure sensitive adhesive, latex synthesis, and ink application with excellent antifoam and defoaming performance. DAPRO® DF 7160 shows excellent foam control , less microfoam and increase coating speed while roller coating adhesive latex on BOPP film to reduce the film transparency concern after processing. view less | Request Sample |
| DAPRO® FK 321 | Elementis 海名斯特殊化学 | DAPRO® FK 321 is an effective auxiliary solvent for reducing the resistance of paints that are sprayed electrostatically. | Request Sample |
| DAPRO® U-99 | Elementis 海名斯特殊化学 | DAPRO® U-99 Interfacial Tension Modifier is a solvent/aqueous that eliminates or diminishes film defects such as crawling, fish eyes, and some forms of cratering in two-component epoxies and alkyd paints. | Request Sample |
| DAPRO® UW 461 | Elementis 海名斯特殊化学 | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | Request Sample |
| DAPRO® W-77 | Elementis 海名斯特殊化学 | DAPRO® W-77 Interfacial Tension Modifier acts as a solvent/aqueous intermediate between areas of high and low surface tension, either within a coating or between the coating and the substrate. | Request Sample |
| Defom 2700 | Elementis 海名斯特殊化学 | Defom 2700 is a silicone-free bubble releasing and anti-foaming agent for solvent based or solvent free systems. It is more suitable for epoxy, unsaturated polyester and UV curing coatings. | Request Sample |
| Defom 3100 | Elementis 海名斯特殊化学 | Defom 3100 is a solvent-free silicone defoamer. It is recommended for solvent-based or solvent-free systems. | Request Sample |
| Defom 3200 | Elementis 海名斯特殊化学 | Defom 3200 is a silicone-free bubble releasing and anti-foaming agent for solvent based and solvent free systems. | Request Sample |
| Defom 3500 | Elementis 海名斯特殊化学 | Defom 3500 is a silicone-free bubble releasing and anti-foaming agent for solvent-based and solvent-free systems, especially in de-aeration of high filler content wood primer. | Request Sample |
| Defom 5300 | Elementis 海名斯特殊化学 | Defom 5300 is a bubble releasing, anti-foaming solvent for high build PU coatings. | Request Sample |
| Defom 5400 | Elementis 海名斯特殊化学 | Defom 5400 is a solvent based bubble releasing, anti-foaming agent characterized by its improved compatibility. | Request Sample |
| Defom 5500 | Elementis 海名斯特殊化学 | Defom 5500 is suitable for solvent-based, solvent-free reaction curing systems, and has thick film coating that is of bubble like properties as part of its removal agent. Good for use on polyurethane. | Request Sample |
| Defom 5600 | Elementis 海名斯特殊化学 | Defom 5600 is a modified silicone suds suppressor, defoamer solvent. | Request Sample |
| Defom 5800F | Elementis 海名斯特殊化学 | Defom 5800F is an aromatic-free defoamer used in solvent-based coatings. | Request Sample |
| Defom 6500 | Elementis 海名斯特殊化学 | Defom 6500 is a bubble releasing, anti-foaming agent for solvent based coatings. | Request Sample |
| Defom 6800 | Elementis 海名斯特殊化学 | Defom 6800 is a bubble releasing. anti-foaming solvent for thick film epoxy floor coatings and silk screen ink. | Request Sample |
| Defom W-080 | Elementis 海名斯特殊化学 | Defom W-080 is an aqueous mineral oil-based defoamer, with acyl amines and provides excellent sud antifoaming effect. | Request Sample |
| Defom W-082 | Elementis 海名斯特殊化学 | Defom W-082 is a hydrocarbon base aqueous defoamer, exhibit excellent antifoaming and defoaming effect. | Request Sample |
| Defom W-086 | Elementis 海名斯特殊化学 | Defom W-086 is a mineral oil-based defoamer which contains hydrophobic particles. It provides excellent foam suppression and anti-foaming effect. | Request Sample |
