Elementis is a supplier of rheology modifiers and specialty additives used in the Paint & Coatings industry. It offers many ingredients for waterborne and solvent systems, including rheological additives, colorant and tinting systems, defoamers, wetting and dispersing agents, and coalescents. Elementis’s BETONE® rheological additives in particular are highly efficient and effective.
Adherant 1051 is a solvent that can improve adhesion of organic resins to inorganic surfaces. For use as a primer, 49.5 parts of Adherant 1051 and 0.5 parts of an organic amine are diluted with about 950 parts methanol, isopropanol or ether glycol. Altern...view more
Adherant 1051 is a solvent that can improve adhesion of organic resins to inorganic surfaces. For use as a primer, 49.5 parts of Adherant 1051 and 0.5 parts of an organic amine are diluted with about 950 parts methanol, isopropanol or ether glycol. Alternatively, a prehydrolyzed primer may be prepared by adding 5 parts water and 1,000 parts of the above primer solution. In both cases, the primer solution is applied to a solid surface such as glass or metal and a polymer is heat pressed or cured on the surface. view less
Adherant 1121 is an adhesion promoter for solvent-based air-dry paints in glass and metal substrates. Adherant 1121 reacts to isocyanate and phenolic aldehyde amine systems curing agent. Please check the curing agent type before use, to avoid products gel...view more
Adherant 1121 is an adhesion promoter for solvent-based air-dry paints in glass and metal substrates. Adherant 1121 reacts to isocyanate and phenolic aldehyde amine systems curing agent. Please check the curing agent type before use, to avoid products gel. view less
Adherant ADP is a solvent additive used to improve adhesion of paint film especially on non-ferrous substrates. It is used to promote adhesion of stoving paints on difficult non-ferrous substrates such as aluminum, zinc, copper, brass, electroplated stee...view more
Adherant ADP is a solvent additive used to improve adhesion of paint film especially on non-ferrous substrates. It is used to promote adhesion of stoving paints on difficult non-ferrous substrates such as aluminum, zinc, copper, brass, electroplated steel etc., to improve the flexibility and impact resistance of paint film, and is thermo-stable so that it does not discolor at elevated temperature. No side-effect of shelf-life. view less
Adherant APC is a solvent added into two-component polyurethane coatings can increase Into the coating of polycarbonate (PC) The adhesion of the plastic. Composition is a non-silicone polymer.
Adherant APW is a solvent additive used to improve adhesion to the surface of metal pigment on the paint film. Apparently improve the interaction force of aluminium flakes with binder. It can combine with acrylic or alkyd of baking paints to improve flexi...view more
Adherant APW is a solvent additive used to improve adhesion to the surface of metal pigment on the paint film. Apparently improve the interaction force of aluminium flakes with binder. It can combine with acrylic or alkyd of baking paints to improve flexibility and resistance of paint film to improve intercoat adhesion. view less
Adherant CP-7540 is chlorinated polyolefin-modified solvent acrylic resin, a widely used PP substrate as an adhesion primer to enhance the coating on PP substrate adhesion.
Benaqua® 4000 rheological additive is an easily dispersible powder designed for lower-gloss and matt latex paints, textured and high-build coatings and aqueous adhesives. It is especially useful in systems that are diluted with water prior to use.
BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...view more
BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. view less
BENGEL® 434 rheological additive is a general purpose solvent organoclay (tetra-alkyl ammonium bentonite) designed for low to medium polarity aliphatic and aromatic coating systems. It also works fine in selective high polarity systems.
BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufac...view more
BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufacturing process. view less
BENGEL® 828 is a rheological additive greatly simplifies the formulation and manufacture of paint systems contain moderate to high polarity solvents such as ketones, esters, glycol ethers, ether esters, alcohol.
BENGEL® 908 rheological additive is a general purpose solvent organoclay designed for low to medium polarity aliphatic and aromatic coating systems. It also works well in other high polarity systems.
BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufactu...view more
BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufacturing procedures. view less
BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate ...view more
BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate and can be added dry to the pigment grinding process without chemical activator or the preparation of a pregel. view less
BENTONE® 1000 has high-performance dispersion characteristics and suitable for low to medium polarity organic solvent coating system of the organic Bentonite additives.
BENTONE® 27 rheological additive is an organic solvent derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders.
BENTONE® 34 is an organic solvent derivative of a bentonite clay. This rheological additive is designed for low to intermediate polarity organic systems.
BENTONE® 38 is an organic solvent derivative of a hectorite clay. This highly efficient rheological additive is designed for low to intermediate polarity organic systems.
BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints.
BENTONE® DY CE additive is an organically modified powdered clay product specially designed for aqueous systems; primarily interior, decorative latex paints.
BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and ...view more
BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and concrete. view less
BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions ...view more
BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions of refined hectorite that develop their full viscosity in the final filled system. view less
BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems.
BENTONE® P270 CO is a pre-activated hectorite based organoclay in castor oil. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products.
BENTONE® P380 MS is a pre-activated hectorite based organoclay in odourless mineral spirits. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products.
BENTONE SD®-1 rheological additive is an organic derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium-polarity solvents.
BENTONE SD®-2 rheological additive is an organic derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols.
BENTONE SD®-3 rheological additive is a modified bentonite organoclay for solventborne medium polarity aliphatic and aromatic paint and coating systems. BENTONE SD®-3 provides stable viscosity, controls sag and suspends pigments.
Catacure KC is a blocked solvent curing catalyst used in baking paints especially for fully alkylated melamines which need strong catalyst. It can either lower baking temperature or shorten baking time.
DAPRO® ACP-16W is a waterborne adhesion promoter. It is designed for improving adhesion of waterborne coatings and inks on polypropylene (PP) substrates.
DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsio...view more
DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsions and emulsion paints. view less
DAPRO® AP 7015 is a defoamer for waterborne systems with very good emulsifying properties. It has excellent anti-foaming and de-foaming effects. It is specially recommended for systems with poor emulsifying properties such as latex paints, pigment disper...view more
DAPRO® AP 7015 is a defoamer for waterborne systems with very good emulsifying properties. It has excellent anti-foaming and de-foaming effects. It is specially recommended for systems with poor emulsifying properties such as latex paints, pigment dispersions, adhesives, inks, other aqueous systems with poor emulsifying properties dispersions and so on. view less
DAPRO® AP 7071 is a high efficiency liquid defoamer, exhibit excellent anti-foaming and defoaming ability in use for universal waterborne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilise...view more
DAPRO® AP 7071 is a high efficiency liquid defoamer, exhibit excellent anti-foaming and defoaming ability in use for universal waterborne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsions, emulsion paints, pigment dispersion, etc. view less
DAPRO® AP 7072 is an aqueous defoamer for high-quality rubber applications. It offers excellent foam suppression and defoaming properties. This product is easily dispersed in water, and is therefore suitable for the preparation of architectural coatings, ...view more
DAPRO® AP 7072 is an aqueous defoamer for high-quality rubber applications. It offers excellent foam suppression and defoaming properties. This product is easily dispersed in water, and is therefore suitable for the preparation of architectural coatings, adhesive, ink and other water-based emulsion systems. view less
DAPRO® AP 7073 is a water dispersible foam control agent for decorative paints and coatings. It is effective in a broad range of high PVC paint systems by providing rapid bubble break at low concentrations.
DAPRO® BEZ 75 is used in non-aqueous coatings as an effective auxiliary solvent to fight settling and sagging. It is particularly useful in aromatic-free formulations.
DAPRO® DF 1181 Foam Suppressor is a highly effective air release additive containing a small amount of a paint-compatible modified silicone for enhanced efficiency. DAPRO® DF 1181 Foam Suppressor can be used in aqueous systems to prevent foam formation.
DAPRO® DF 1760 foam suppressor is a highly effective, silicone free, long lasting aqueous bubble breaker. It remains effective after extended storage of the system in which it is used.
DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and c...view more
DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and clear acrylic coatings. view less
DAPRO® DF 605 is an excellent defoamer for water based elastomeric coatings, mastics and water reducible industrial coatings. It easily diluted with water and is stable over several free thaw cycles.
DAPRO® DF 675 is a mineral oil-free effective grind defoamer for high quality aqueous decorative and waterborne industrial coatings. DAPRO® DF 675 is particularly useful in no-VOC decorative coatings for maintaining gloss and minimizing surface defects.
DAPRO® DF 690 is an antifoaming agent for a grinding stage or high shear stage with excellent destabilizing effect on foaming and microbubbles. It exhibits excellent durability without affecting system gloss and color rendering.
DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...view more
DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. view less
DAPRO® DF 7005 is a silicone free liquid defoamer, economical in use, for universal aqueous applications. The product shows very good long-term efficiency.
DAPRO® DF 7015 is a defoamer for aqueous systems with very good emulsifying properties. It is specially recommended for use in grinding pastes, emulsion paints and inks.
DAPRO® DF 7073 is a water-dispersible foam control agent for architectural coatings applications. It is widely used in high PVC paint system at low concentrations to provide fast-breaking foam properties. This product imparts mild gloss and no impact resi...view more
DAPRO® DF 7073 is a water-dispersible foam control agent for architectural coatings applications. It is widely used in high PVC paint system at low concentrations to provide fast-breaking foam properties. This product imparts mild gloss and no impact resistance. view less
DAPRO® DF 7079 is an aqueous defoamer for VOC-free water-based architectural coatings. It can be used in coatings and paints and paint in the grinding stage. This defoamer imparts excellent foam control. At low dosage, this product provides particularly e...view more
DAPRO® DF 7079 is an aqueous defoamer for VOC-free water-based architectural coatings. It can be used in coatings and paints and paint in the grinding stage. This defoamer imparts excellent foam control. At low dosage, this product provides particularly effective quick foam breaking performance for matte and high gloss coatings. view less
DAPRO® DF 7160 is a special design, easy dispersible defoamer for pressure sensitive adhesive, latex synthesis, and ink application with excellent antifoam and defoaming performance. DAPRO® DF 7160 shows excellent foam control , less microfoam and increas...view more
DAPRO® DF 7160 is a special design, easy dispersible defoamer for pressure sensitive adhesive, latex synthesis, and ink application with excellent antifoam and defoaming performance. DAPRO® DF 7160 shows excellent foam control , less microfoam and increase coating speed while roller coating adhesive latex on BOPP film to reduce the film transparency concern after processing. view less
DAPRO® FX 2060 is an effective polyamide solvent activator for bentonite- and hectorite- based organoclay pregels which increases the sag resistance and reduces pigment settling of non-aqueous coatings.
DAPRO® U-99 Interfacial Tension Modifier is a solvent/aqueous that eliminates or diminishes film defects such as crawling, fish eyes, and some forms of cratering in two-component epoxies and alkyd paints.
DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems.
DAPRO® W-77 Interfacial Tension Modifier acts as a solvent/aqueous intermediate between areas of high and low surface tension, either within a coating or between the coating and the substrate.
Defom 2700 is a silicone-free bubble releasing and anti-foaming agent for solvent based or solvent free systems. It is more suitable for epoxy, unsaturated polyester and UV curing coatings.
Defom 3500 is a silicone-free bubble releasing and anti-foaming agent for solvent-based and solvent-free systems, especially in de-aeration of high filler content wood primer.
Defom 5500 is suitable for solvent-based, solvent-free reaction curing systems, and has thick film coating that is of bubble like properties as part of its removal agent. Good for use on polyurethane.
Defom W-0506 is an emulsified polysiloxane aqueous defoamer, used in anti-foaming and de-foaming for during manufacturing and application on water-based.
DeuAdd DVP, a solvent, can maintain the safety of the viscosity of the air-dry paint baking finish, preventing the occurrence of gelled and gelled coating peel.
DeuAdd MA-95 is a multifunctional aqueous amine low odor neutralizer, with pH adjustment and stability, to promote the show of film gloss and to improve anti-corrosion in tanks. It has low odor, low volatility and effectively improves the freeze-thaw stab...view more
DeuAdd MA-95 is a multifunctional aqueous amine low odor neutralizer, with pH adjustment and stability, to promote the show of film gloss and to improve anti-corrosion in tanks. It has low odor, low volatility and effectively improves the freeze-thaw stability of liquid paint and tank corrosion resistance. view less
DeuAdd MB-11 is used for a broad spectrum of bactericidal preservatives in product production. It provides excellent bacteriostatic, and a bactericidal effect. It can be widely used as an aqueous emulsion in milk and most of the plastic paint, water-based...view more
DeuAdd MB-11 is used for a broad spectrum of bactericidal preservatives in product production. It provides excellent bacteriostatic, and a bactericidal effect. It can be widely used as an aqueous emulsion in milk and most of the plastic paint, water-based paint and other water-based systems. view less
DeuAdd MB-16 is for a broad spectrum of preservative products. It can provide excellent bactericidal in products and has an antifungal effect. It can be widely used in aqueous systems. It can effectively inhibit the breeding of mold, bacteria, prevent the...view more
DeuAdd MB-16 is for a broad spectrum of preservative products. It can provide excellent bactericidal in products and has an antifungal effect. It can be widely used in aqueous systems. It can effectively inhibit the breeding of mold, bacteria, prevent the coating becoming faded in color or coating deterioration, particularly under the effect of high humidity environment. view less
DeuRheo 201 is a dispersed polyethylene wax slurry solvent, which is convenient and easy to disperse as a anti-settling agent. Best used in alkyd / melamine paint, acrylic / melamine paint, epoxy resin, vinyl polyurethane coating and spray paint.
DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks...view more
DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks and aluminum paint. view less
DeuRheo 202P is a dispersed polyethylene wax slurry solvent for anti-settling. It is an agent to effectively work with pigment by having anti-settling properties. The slurry appearance is suitable for high shear grinding and dispersion equipment. Pigment ...view more
DeuRheo 202P is a dispersed polyethylene wax slurry solvent for anti-settling. It is an agent to effectively work with pigment by having anti-settling properties. The slurry appearance is suitable for high shear grinding and dispersion equipment. Pigment anti-settling effect helps avoid the deposition of becoming hard in the bottom of the tank. view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.
