| TARGON® G | ICL Phosphate Specialty | TARGON® G is a special product based on condensed phosphates with anticaking agent. It is a white, fine, hygroscopic powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It achieves constant setting, pr...view more TARGON® G is a special product based on condensed phosphates with anticaking agent. It is a white, fine, hygroscopic powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It achieves constant setting, prolongs the treating time between cutting and felting and improves the finishing treating qualities. view less | Request Sample |
| Natrosol™ Plus 330 PA 5075 | Ashland | Natrosol™ Plus 330 PA 5075 is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer, which is an advantage in latex paints. It has outstanding spatter resistance, enhanced brushing viscosit...view more Natrosol™ Plus 330 PA 5075 is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer, which is an advantage in latex paints. It has outstanding spatter resistance, enhanced brushing viscosity, therefore better film build, improved levelling with good sag resistance, and excellent storage stability. view less | |
| GARAMITE® 1958 | BYK | GARAMITE® 1958 is a unique rheological additive developed for a wide range of solvent born systems. Compared to fumed silica and organoclays, GARAMITE® 1958 provides improved sag (drainage) resistance, control of settling, metallic orientation, and stabil...view more GARAMITE® 1958 is a unique rheological additive developed for a wide range of solvent born systems. Compared to fumed silica and organoclays, GARAMITE® 1958 provides improved sag (drainage) resistance, control of settling, metallic orientation, and stability. It is also more efficient and easier to handle in manufacturing (less dusty, higher bulk density and not sensitive to shear). view less | |
| Iscathix® ISP | ISCA UK Limited | Iscathix® ISP is a 100% active, hydrogenated castor oil based rheological additive, designed for use in aliphatic solvent based coatings and solvent-free systems. Iscathix® ISP has various applications, including: Architectural paints, woodstains, air-d...view more Iscathix® ISP is a 100% active, hydrogenated castor oil based rheological additive, designed for use in aliphatic solvent based coatings and solvent-free systems. Iscathix® ISP has various applications, including: Architectural paints, woodstains, air-drying industrial coatings, 2K solvent-free epoxy systems, textile backings, powder coatings, cosmetics, sealants, caulks, etc. view less | |
| AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. | Request Sample |
| CLiQFLOW® 707 | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 707 is a thixotropic additive with a hydrogenated caster oil-base for non to low-polar solvent-based systems and solvent-free systems. A micronized powder, It gives off a strong shear thinning flow behavior with good flow, leveling and sag resis...view more CLiQFLOW® 707 is a thixotropic additive with a hydrogenated caster oil-base for non to low-polar solvent-based systems and solvent-free systems. A micronized powder, It gives off a strong shear thinning flow behavior with good flow, leveling and sag resistance. The product is used in general industrial and heavy-duty non-aqueous paints as well as unsaturated polyester putties, adhesives and sealants. view less | |
| DA-40A | Antex Chemicals (Zhongshan) Limited | DA-40A is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| DA-40N | Antex Chemicals (Zhongshan) Limited | DA-40N is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| Kemapox® EM 260 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coating...view more Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 77000-120000 mPas at 23°C. view less | |
| Kemapox® EM 267 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be ...view more Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 5000 mPas at 23°C. view less | |
| KMP 100000N | Vink Chemicals GmbH & Co. KG | KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...view more KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. view less | |
| KMP 150000N | Vink Chemicals GmbH & Co. KG | KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...view more KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. view less | |
| KMP 100000 | Vink Chemicals GmbH & Co. KG | KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...view more KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, and white render finishes. view less | |
| KMP 400 | Vink Chemicals GmbH & Co. KG | KMP 400 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic prope...view more KMP 400 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in self-leveling applications. view less | |
| KMP 75000 | Vink Chemicals GmbH & Co. KG | KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pro...view more KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. view less | |
| KMP 15000 | Vink Chemicals GmbH & Co. KG | KMP 15000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pro...view more KMP 15000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in mortars, fillers, and plasters. view less | |
| KMP 200000 | Vink Chemicals GmbH & Co. KG | KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...view more KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, plasters, and white render finishes. view less | |
| TARGON® B 350 | ICL Phosphate Specialty | TARGON® B 350 is a retarder for gypsum formulations containing Ca(OH)2. It is recommended for formulations where a very rapid setting is needed, e.g. anhydrite floor screed. | Request Sample |
| Targon® 812 | ICL Phosphate Specialty | Targon® 812 is a setting retarder for gypsum plasters which are free of calciumhydroxide. It can also be used as retarder for cement-based products. Targon® 812 achieves constant setting, prolongs the working time, and improves the finishing treatment qua...view more Targon® 812 is a setting retarder for gypsum plasters which are free of calciumhydroxide. It can also be used as retarder for cement-based products. Targon® 812 achieves constant setting, prolongs the working time, and improves the finishing treatment qualities. view less | Request Sample |
| LAPONITE® EP | BYK | LAPONITE® EP is a layered silicate manufactured from naturally occurring mineral sources with a proprietary organic modification. LAPONITE® EP is designed to give Extra Performance and enhanced rheology control under “harsh conditions”. This product is u...view more LAPONITE® EP is a layered silicate manufactured from naturally occurring mineral sources with a proprietary organic modification. LAPONITE® EP is designed to give Extra Performance and enhanced rheology control under “harsh conditions”. This product is used to improve the performance and stability of a wide range of water based formulated products. view less | |
| Natrosol™ HE 10K | Ashland | Natrosol™ HE 10K is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It is the most pseudoplastic and therefore highest efficiency cellulose ether available in the market. It provides consistent thickening and ex...view more Natrosol™ HE 10K is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It is the most pseudoplastic and therefore highest efficiency cellulose ether available in the market. It provides consistent thickening and excellent package stability as well as offering less sensitivity to pH, surfactants, and other paint additives. view less | |
| Borchi® Gel LW 44 | OMG Borchers GmbH | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and c...view more Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. view less | |
| CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL pa...view more CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| Thickener PU 3 | Ichemco | Thickener PU 3 is a sodium polyacrylate thickener. This product has a Brookfield viscosity at 25°C of 23,000-33,000 mPa.s. Thickener PU 3 is most commonly used as a thickening agent in synthetic latex paint formulation applications. | |
| AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520 is a special, structured, highly filled dispersion of hydrophobic AEROSIL® fumed silica. It can be used for rheology control, anti-settling, pigment stabilization and improves the mechanical properties. | Request Sample |
| CRAYVALLAC® SUPER | Arkema Rheology & Specialty Additives | CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net...view more CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| Iscathix® T | ISCA UK Limited | Iscathix® T is a 100% active rheological additive based on a modified hydrogenated castor oil wax, and is suitable for use in a wide range of coating systems. Iscathix® T can be used for: Air-drying industrial coatings, architectural paints, solvent-fre...view more Iscathix® T is a 100% active rheological additive based on a modified hydrogenated castor oil wax, and is suitable for use in a wide range of coating systems. Iscathix® T can be used for: Air-drying industrial coatings, architectural paints, solvent-free systems, chlorinated rubbers, 2K epoxy primers and top-coats, road marking paints, thermoplastic acrylics, isocyanate-free 2K acrylics, etc. view less | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...view more Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. view less | |
| Borchi® Gel ALA | OMG Borchers GmbH | Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film...view more Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film structure and minimizes spatter during application of emulsion paints, lacquers and printing inks. The optimization of flow characteristics results in a significant improvement in optical properties, particularly in high gloss emulsion systems. view less | |
| CRAYVALLAC® ULTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result...view more CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| AM-71 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in...view more AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in leather base coat or topcoat applications at levels from 1-3% to increase viscosity and enhance the rheology properties of the coating. view less | |
| KLUCEL™ PR Hydroxypropylcellulose | Ashland | KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/...view more KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/methanol mixtures. view less | |
| Deuteron ND 953 | Deuteron | Deuteron ND 953 helps to prevent the uncontrollable increase in viscosity which can arise in presence of certain pigments and fillers in heavily-filled aqueous systems. The required rheological properties of the paint or coating material can be obtained j...view more Deuteron ND 953 helps to prevent the uncontrollable increase in viscosity which can arise in presence of certain pigments and fillers in heavily-filled aqueous systems. The required rheological properties of the paint or coating material can be obtained just through the character of the used binder or by addition of a suitable thickener. The presence of Deuteron ND 953 improves the storage stability. Unwelcome thickening during storage will be avoided or limited. Deuteron ND 953 is used in aqueous paints and coating materials, e.g. masonry paints, fillers, aqueous primers, water-based bituminous emulsions. The product is also suitable for use in water-based pigment preparations. It is most effective in presence of inorganic pigments and fillers. view less | Request Sample |
| CRAYVALLAC® LV | Arkema Rheology & Specialty Additives | CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It impart...view more CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the ra...view more CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...view more CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| MULTIFLOW® Resin | Allnex | Multiflow® Resin is a low viscosity flow modifier for non-aqueous industrial coatings. It is used for high quality industrial finishes and multiflow resins. | Request Sample |
| BENTONE® DY | Elementis | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| CLAYTONE-40 | BYK | CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. | |
| VANZAN® | Vanderbilt Minerals, LLC | VANZAN® is a standard grade xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as ...view more VANZAN® is a standard grade xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH and temperature ranges. view less | |
| VANZAN® D | Vanderbilt Minerals, LLC | VANZAN® D is a xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extre...view more VANZAN® D is a xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH and temperature ranges. VANZAN® D is an easily dispersible grade that is activated when the pH of the system is elevated. view less | |
| CoatForce® CF30 | Lapinus Fibres BV | CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various pain...view more CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various paint and coating systems. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| CoatForce® CF50 | Lapinus Fibres BV | CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various p...view more CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various paint and coating systems. CoatForce® CF50 has an off-white colour and very low shot content. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| CoatForce® CF10 | Lapinus Fibres BV | CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. Th...view more CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. The off-white colour makes it especially suitable for decorative applications. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| Rockforce® MS640-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and im...view more Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and improved thermal resistance of the product. Rockforce® MS640-Roxul®1000 reduces the speed of deterioration of the rubber matrix, since engineered mineral fibres are not susceptible to ageing under the applied conditions. view less | |
| Rockforce® MS750-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of ch...view more Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of chemical composition, shot content, and fibre length. view less | |
| Rockforce® RF840-Roxul®1000 | Lapinus Fibres BV | Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a signi...view more Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a significant better flexible strength and higher compression strength. Rockforce® RF840-Roxul®1000 is consistent in terms of chemical composition, surface treatment, purity, and fibre length. view less | |
| JK-703 | Jingkun Chemistry Company | JK-703 is a nonionic etherified guar gum. It provides excellent water retention and adherence without stickiness to tools. It also provides easy processing due to very good gliding properties. | |
| CRAYVALLAC® PA4 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 p...view more CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
| HDK® N20D | Wacker Chemie AG | HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such...view more HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such as adhesives, adsorption agents, decorative cosmetics, inkjet, coatings and wind power. view less | |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of ap...view more AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less | Request Sample |
| HDK® T30 | Wacker Chemie AG | HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, pr...view more HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. HDK® T30 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. view less | |
| Polycol T-15 | Polygal AG | POLYCOL T-15 is a etherified polysaccaride with medium viscosity, mainly used as a cost effective water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering...view more POLYCOL T-15 is a etherified polysaccaride with medium viscosity, mainly used as a cost effective water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering the stickiness on the trowelling equipment in different kind of building chemical products like gypsum- and cement plasters, renders, fillers and mortars. view less | |
| CRAYVALLAC® PA4 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for p...view more CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. CRAYVALLAC® PA4 BA 20 is especially suited to coatings demanding a higher degree of surface gloss or transparency. view less | Request Sample |
| HDK® H15 | Wacker Chemie AG | HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the ...view more HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the production of technical powders. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. view less | |
| HDK® T40 | Wacker Chemie AG | HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickenin...view more HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. view less | |
| CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...view more CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| HDK® N20 | Wacker Chemie AG | HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is app...view more HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. view less | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Polycol T-08 H | Polygal AG | Polycol T-08 H is a highly etherified polysaccaride with low viscosity, mainly used as a water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering the stic...view more Polycol T-08 H is a highly etherified polysaccaride with low viscosity, mainly used as a water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering the stickiness on the trowelling equipment in different kind of building chemical products like gypsum- and cement plasters, renders, fillers and mortars. POLYCOL T-08 H offers superior water retention (open time) at same dosage compared to other POLYCOL products. view less | |
| Celopro® ME4M P | Celotech Chemical Co., Ltd. | Celopro® ME4M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement based grouts and repair mortars. | |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and a...view more AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow aid. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less | Request Sample |
| CRAYVALLAC® PA3 WDA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscos...view more CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling. view less | Request Sample |
| CRAYVALLAC® PA3 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to sol...view more CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. view less | Request Sample |
| LAPONITE® SL25 | BYK | LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On additi...view more LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. view less | |
| Celopro® ME6M P | Celotech Chemical Co., Ltd. | Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based j...view more Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based jointing compounds. view less | |
| Celopro® ME70M P | Celotech Chemical Co., Ltd. | Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and th...view more Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and thin layer plasters. view less | |
| KLUCEL™ Hydroxypropylcellulose, Industrial Grade | Ashland | KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymer...view more KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymers. view less | |
| LAPONITE® S482 | BYK | LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remai...view more LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. view less | |
| Celopro® ME60M P | Celotech Chemical Co., Ltd. | Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, ...view more Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, and machine applied plasters. view less | |
| Celopro® ME10M P | Celotech Chemical Co., Ltd. | Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...view more Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. view less | |
| Celopro® ME20M P | Celotech Chemical Co., Ltd. | Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...view more Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. view less | |
| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...view more Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. view less | |
| Celopro® ME30M P | Celotech Chemical Co., Ltd. | Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...view more Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. view less | |
| Celopro® ME40M P | Celotech Chemical Co., Ltd. | Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...view more Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. view less | |
| Celopro® ME50M P | Celotech Chemical Co., Ltd. | Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-base...view more Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, gypsum-based machine applied plasters, and decorative renders. view less | |
| CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...view more CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
| CRAYVALLAC® PA4 WDA 12 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA ...view more CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA 12 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...view more Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. view less | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...view more Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. view less | |
| TARGON® 35 | ICL Phosphate Specialty | TARGON® 35 is a setting retarder for cement based products. It is composed of a tetrapotassium pyrophosphate 60% clear solution. | Request Sample |
| TARGON® 34 | ICL Phosphate Specialty | TARGON® 34 is a setting retarder for cement based products. It is a tetrapotassium pyrophosphate that appears as white hygroscopic granules. | Request Sample |
| TARGON® 19 | ICL Phosphate Specialty | TARGON® 19 is a setting retarder composed of Sodium monofluorphosphate Na2PO3F. It is used for cement based products especially to get a steady consistency of the mortar during the application and the first hours until the begin of setting. | Request Sample |
| TARGON® TM | ICL Phosphate Specialty | TARGON® TM is a processing additive for premixed screeds and self-levelling floor compounds based on cement. It is also a setting retarder for cement based products. This product is a sodium triphosphate that consists of a white, very fine powder. It offe...view more TARGON® TM is a processing additive for premixed screeds and self-levelling floor compounds based on cement. It is also a setting retarder for cement based products. This product is a sodium triphosphate that consists of a white, very fine powder. It offers good miscibility with cement based dry mortars due to its particle size, and there is no risk of demixing. TARGON® TM works as a setting retarder and a plasticizer, complexes multivalent cations e.g. Mg2+ and Ca2+, and can be combined with TYLOSE® MC-types and other processing auxiliaries e.g. tensides. view less | Request Sample |
| HDK® H13L | Wacker Chemie AG | HDK® H13L is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is mainly used in polar systems. Due to its strong hydrophobicity HDK® H13L is well suited for solventfree systems, for high solids and for waterborne coatings. It ...view more HDK® H13L is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is mainly used in polar systems. Due to its strong hydrophobicity HDK® H13L is well suited for solventfree systems, for high solids and for waterborne coatings. It can be applied in adhesives, coatings, metal coatings, protective coatings, surface coatings for plastics, hand lay up technique and spray up technique. view less | |
| HDK® H2000 | Wacker Chemie AG | HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is use...view more HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is used as a free flow additive in the production of technical powders and as additive in antifoam agents. view less | |
| TARGON® CP Granules | ICL Phosphate Specialty | TARGON® CP Granules is an additive for gypsum plaster and plaster boards. It is a cyclic sodium trimetaphosphate. | Request Sample |
| HDK® H30 | Wacker Chemie AG | HDK® H30 is a white colloidal powder of high purity and is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts as a free flow additive in the ...view more HDK® H30 is a white colloidal powder of high purity and is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts as a free flow additive in the production of powder coatings and can be applied in automotive refinishes, coatings, flexographic printing, metal coatings, printing inks and reinforcement of mechanical properties. view less | |
| LAPONITE® RD | BYK | LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...view more LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. view less | |
| LAPONITE® RDS | BYK | LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will r...view more LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulations including household and industrial surface coatings, cleansers, agrochemical and horticultural products. view less | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...view more Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. view less | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...view more Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...view more Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...view more Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. view less | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...view more Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. view less | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...view more Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...view more Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...view more Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...view more Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. view less |
