| Tyzor® LA | LEHVOSS Group | Tyzor® LA is a hydrolytically stable, chelated titanium solution that is a clear to slightly hazy, colorless to light yellow aqueous liquid with active content. It is a water based titanium chelate that is stable in water at pH 7, making it an excellent choice for use in aqueous systems. This product is stable so long as the pH is maintained around 7-8. Tyzor® LA can act as a catalyst in applications such as esterification, transesterification, and condensation. It can effect cross-linking of OH functional polymers, adhesion promotion, and formation of polymeric...view more Tyzor® LA is a hydrolytically stable, chelated titanium solution that is a clear to slightly hazy, colorless to light yellow aqueous liquid with active content. It is a water based titanium chelate that is stable in water at pH 7, making it an excellent choice for use in aqueous systems. This product is stable so long as the pH is maintained around 7-8. Tyzor® LA can act as a catalyst in applications such as esterification, transesterification, and condensation. It can effect cross-linking of OH functional polymers, adhesion promotion, and formation of polymeric titanium dioxide as binder or coating. view less | |
| DSX® 1516 | BASF Formulation Additives | DSX® 1516 is a non-ionic medium pseudoplastic rheology modifier for water-based coatings. It gives pseudoplastic behavior to aqueous systems. It is film-building and shows good affinity to pigments. Thickening is independent of the pH. This product is suitable for the thickening and modification of the flow properties of water-based polymers (e.g., acrylic copolymers, vinyl acetate homopolymers, acrylic polymers, PVAc-VC copolymers, polyurethanes, amine-neutralized and emulsified systems) as well as for products based on polymeric...view more DSX® 1516 is a non-ionic medium pseudoplastic rheology modifier for water-based coatings. It gives pseudoplastic behavior to aqueous systems. It is film-building and shows good affinity to pigments. Thickening is independent of the pH. This product is suitable for the thickening and modification of the flow properties of water-based polymers (e.g., acrylic copolymers, vinyl acetate homopolymers, acrylic polymers, PVAc-VC copolymers, polyurethanes, amine-neutralized and emulsified systems) as well as for products based on polymeric binders such as emulsion paints, texture finishes, high-gloss emulsions paints, water-based putties, adhesives and corrosion primers. view less | |
| Tyzor® TPT | LEHVOSS Group | Tyzor® TPT (tetra-isopropyl titanate) is a 100% active, highly reactive organic alkoxy titanate. It is a clear, colorless to yellowish liquid that is very sensitive to moisture. With a freezing point of approximately 19°C (66ºF), Tyzor® TPT may crystallize at low temperatures. If crystallization occurs, the product can be readily re-dissolved by warming and agitation. It acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation and addition. It can also be used to effect adhesion promotion and cross-linking of polymers, or to form polymeric...view more Tyzor® TPT (tetra-isopropyl titanate) is a 100% active, highly reactive organic alkoxy titanate. It is a clear, colorless to yellowish liquid that is very sensitive to moisture. With a freezing point of approximately 19°C (66ºF), Tyzor® TPT may crystallize at low temperatures. If crystallization occurs, the product can be readily re-dissolved by warming and agitation. It acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation and addition. It can also be used to effect adhesion promotion and cross-linking of polymers, or to form polymeric titanium dioxide layers used as a binder or coating. view less | |
| NACURE® 5414 | King Industries, Inc. | NACURE® 5414 appears as a clear, amber liquid and is a polymeric blocked sulfonic acid ester stimulant suggested for use with amino crosslinking resins. It can be applied to electrostatic spray applications, automotive topcoats, and general industrials. N...view more NACURE® 5414 appears as a clear, amber liquid and is a polymeric blocked sulfonic acid ester stimulant suggested for use with amino crosslinking resins. It can be applied to electrostatic spray applications, automotive topcoats, and general industrials. NACURE® 5414 offers great intercoat adhesion, better solubility, humidity resistance, and low conductivity that is necessary for electrostatic spray applications. This product is soluble in aliphatic and aromatic hydrocarbons, glycol ethers, glycols, esters, alcohols, and ketones. It is insoluble in water and although it is soluble in alcohols they should be avoided because they may have a negative impact on stimulant stability. view less | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...view more H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. view less | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...view more H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. view less | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...view more H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. view less | |
| PAT-ADD DA 603 | Patcham LTD | PAT-ADD DA 603 is a polymeric wetting and dispersing additive for waterborne pigment dispersions, architectural, industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigment...view more PAT-ADD DA 603 is a polymeric wetting and dispersing additive for waterborne pigment dispersions, architectural, industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon blacks. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic organic pigments, enables high pigment loadings, at lowest viscosity, APEO free, optimizes color development, and strong contribution to electrostatic pigment stabilization, as well as steric stabilization; minimizing tendency for flocculation in the liquid stage as well as during application and film formation of waterborne formulations. view less | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...view more Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...view more Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. view less | Request Sample |
| GENOPOL* BP-2 | Rahn AG | GENOPOL* BP-2 is a multifunctional benzophenone derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for benzophenone and its derivatives. During the production process of the polymeric...view more GENOPOL* BP-2 is a multifunctional benzophenone derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for benzophenone and its derivatives. During the production process of the polymeric GENOPOL* product range, the low molecular weight substances are removed. Therefore, GENOPOL* BP-2 is very low in odor. Combined with the ability to link into the UV cured acrylate matrix, GENOPOL* BP-2 will exhibit extremely low tendency to migrate. This product can be used in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. view less | Request Sample |
| SCHWEGO® Wett 8092 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 8092 is a polymeric wetting and dispersing additive for water-based and solvent borne coating systems. This yellow, clear liquid is universally suitable for pigments in water-based and solvent borne coating systems. Milling time is shortened...view more SCHWEGO® Wett 8092 is a polymeric wetting and dispersing additive for water-based and solvent borne coating systems. This yellow, clear liquid is universally suitable for pigments in water-based and solvent borne coating systems. Milling time is shortened as pigment agglomerates are ruptured and stabilised effectively. Hence, sedimentation and unmixing of the pigments, respectively floating or flooding during application, are prevented. The tinting strength of pigments is improved and the colour tone does not change even after long storage times. Schwego® Wett 8092 is compatible with most resin systems. This product can be used to disperse inorganic and organic pigments and carbon black. It is especially suitable for the production of universal pastes and highly filled systems. view less | |
| PAT-ADD DA 603 LV | Patcham LTD | PAT-ADD DA 603 LV is a low VOC, polymeric, APEO free wetting and dispersing additive for waterborne pigment dispersions, architectural and industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous disper...view more PAT-ADD DA 603 LV is a low VOC, polymeric, APEO free wetting and dispersing additive for waterborne pigment dispersions, architectural and industrial paints, and printing inks. It is specifically designed for the preparation of concentrated aqueous dispersions of inorganic pigments, hydrophilic organic pigment or hydrophilic carbon black. Main benefits are: strong dispersing properties for pigments such as iron oxides, hydrophilic carbon black, moderately hydrophilic organic pigments, enables high pigment loadings, at lowest viscosity, APEO free, low VOC, optimizes color development, and strong contribution to electrostatic pigment stabilization, as well as steric stabilization; minimizing tendency for flocculation in the liquid stage as well as during application and film formation of waterborne formulations. view less | Request Sample |
| PAT-ADD DA 861 | Patcham LTD | PAT-ADD DA 861 is a polymeric dispersing agent for solvent-borne, solvent-free, and aqueous paints, inks and colorants. PAT-ADD DA 861 is free of volatile organic components. It is multifunctional and compatible with a wide range of non-polar and polar so...view more PAT-ADD DA 861 is a polymeric dispersing agent for solvent-borne, solvent-free, and aqueous paints, inks and colorants. PAT-ADD DA 861 is free of volatile organic components. It is multifunctional and compatible with a wide range of non-polar and polar solvent-borne paint systems. Although, PAT-ADD DA 861 is multifunctional and applicable to most pigments, it is particularly effective as a dispersant for carbon black. Main benefits are: a universal dispersant, optimizes the milling process, enabling higher pigment loadings, provides excellent color development, no-VOC, odorless, strong prevention of pigment flocculation, floating, flooding, and pigment settling, and wide range of compatibility, in solvent-borne, solvent-free as well as in most waterborne. view less | Request Sample |
| ECOPOLTEXT-D | Ecopol Tech | ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high concentration of polymer, and very low viscosity. This gives a very good performance for digital printing. The product is free of NMP, NEP, and VOCs and organo-TIN free. Due to its unique polymeric...view more ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high concentration of polymer, and very low viscosity. This gives a very good performance for digital printing. The product is free of NMP, NEP, and VOCs and organo-TIN free. Due to its unique polymeric structure, ECOPOLTEXT-D is particularly suitable for applications involving different substrates. As with any product, ECOPOLTEXT-D should be tested or formulated for a specific use before an extensive application. Resin dispersions, emulsifiers, and thickening agents, among others, can be added. view less | Request Sample |
| PAT-ADD DA 801 | Patcham LTD | PAT-ADD DA 801 is a polymeric dispersing agent for use in solvent-borne and solvent-less paints, inks and colorants. PAT-ADD DA 801 is multifunctional and compatible with a wide range of apolar and polar solvent-borne paint systems. Although, PAT-ADD DA 8...view more PAT-ADD DA 801 is a polymeric dispersing agent for use in solvent-borne and solvent-less paints, inks and colorants. PAT-ADD DA 801 is multifunctional and compatible with a wide range of apolar and polar solvent-borne paint systems. Although, PAT-ADD DA 801 is multifunctional and applicable to most pigments, it is particularly effective as dispersant for carbon black. Main benefits: universal dispersant, optimizes the milling process, enabling higher pigment loading, provides excellent color development solvent-free, strong prevention of pigment flocculation, floating, flooding, and pigment settling, wide range of compatibility, in solvent-borne, solvent free as well as most waterborne formulations, and for industrial, architectural paints, for printing inks and colorants. view less | Request Sample |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are ...view more Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-1 has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-1 is an excellent choice in multiple-layer coatings. Dynoadd® F-1 has applications in industrial coatings, coil coatings, automotive OEM, printing inks, and woods coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| SCHWEGO® Wett 6260 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6260 is a polymeric wetting and dispersing additive for water-based coating systems. This product universally suitable for pigment milling in water-based coating systems. It shortens milling time, because pigment agglomerates are ruptured an...view more SCHWEGO® Wett 6260 is a polymeric wetting and dispersing additive for water-based coating systems. This product universally suitable for pigment milling in water-based coating systems. It shortens milling time, because pigment agglomerates are ruptured and stabilised effectively. Hence, sedimentation and demixing of the pigments, respectively floating or flooding during application, are prevented. The colour strength of pigments is improved and the colour shade does not change even after long storage. SCHWEGO® wett 6260 is compatible with most resin systems. SCHWEGO® wett 6260 is suitable to disperse inorganic and organic pigments and carbon black. It is especially suitable for the production of UV coatings. SCHWEGO® wett 6260 is also suitable for alkyd-, acryl-, polyester, epoxy- and PUR-coating systems. view less | |
| SCHWEGO® Wett 6292 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6292 is a wetting and dispersing additive for water-based and solvent borne coating systems. This clear, yellow liquid is VOC-free and can be used to disperse inorganic, organic pigments and carbon black. It is especially suitable for the production of universal pastes and highly filled systems. Additionally SCHWEGO® wett 6292 can be used in solvent-free and UV-systems. SCHWEGO® wett 6292 is a polymeric...view more SCHWEGO® Wett 6292 is a wetting and dispersing additive for water-based and solvent borne coating systems. This clear, yellow liquid is VOC-free and can be used to disperse inorganic, organic pigments and carbon black. It is especially suitable for the production of universal pastes and highly filled systems. Additionally SCHWEGO® wett 6292 can be used in solvent-free and UV-systems. SCHWEGO® wett 6292 is a polymeric wetting and dispersing additive universally suitable for water-based and solvent borne systems. It shortens milling time, as pigment agglomerates are ruptured and stabilised effectively. Hence, sedimentation and unmixing of the pigments, respectively floating or flooding during application are prevented. Colour strength of pigments improves, and the colour shade does not change after long storage time. view less | |
| Texaphor® P 63 | BASF Formulation Additives | Texaphor® P 63 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. Texaphor® P 63 reduces the dispersing time ...view more Texaphor® P 63 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. Texaphor® P 63 reduces the dispersing time and the mill base viscosity and thus facilitates the formulation of highly concentrated pigment pastes. After the pigment paste has been blended into paint, Texaphor® P 63 prevents flooding and floating of pigments and promotes excellent gloss and high color intensity. This product is readily compatible with a wide range of binder types. Pigment pastes based on Texaphor® P 63 can therefore be used in 2-component polyurethane paints, 2 - component epoxy paints, unsaturated polyester, stoving paints and air drying paints. view less | |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissi...view more Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-3Bg has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-3Bg is an excellent choice in multiple-layer coatings, as it does not interfere with inter-coat adhesion. Dynoadd® F-3B has applications in coil coatings and can coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| GENOPOL* TX-2 | Rahn AG | GENOPOL* TX-2 is a multifunctional thioxanthone derivative for use in UV-curable inks, coatings and adhesives where low migration and low odor are required. It can be used as a replacement for ITX and other thioxanthone derivatives. During the production process of the polymeric...view more GENOPOL* TX-2 is a multifunctional thioxanthone derivative for use in UV-curable inks, coatings and adhesives where low migration and low odor are required. It can be used as a replacement for ITX and other thioxanthone derivatives. During the production process of the polymeric GENOPOL* product range, the low molecular weight substances are removed. Therefore, GENOPOL* TX-2 is very low in odor. Combined with the ability to link into the UV cured acrylate matrix, GENOPOL* TX-2 will exhibit extreme low tendency to migrate. This product is used in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. GENOPOL*.TX-2 should always be used in combination with GENOPOL*.AB-2. view less | Request Sample |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and p...view more Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...view more Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dyno...view more Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-101 is more polar than Dynoadd® F-100. Dynoadd® F-101 gives improved protection against surface defects in radcure formulations. The higher polarity contributes to good pigment wetting and improved adhesion in some systems. Dynoadd® F-101 has application in coil coatings, automotive OEM, printing ink, and radcure coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, Dynoadd® F-101 is seen to have an extra advantage in polar lacquer systems due to its polar properties. It may be used in all layers in multi-layered systems. view less | Request Sample |
| SAPEG 200 | Sabic Europe | SAPEG 200 is a non toxic, non irritant, colorless and odorless liquid. It is used as a humecatant, lubricant, solvent, and viscosity modifier in many applications. It consists of a distribution of polymers of varying molecular weights with an average mole...view more SAPEG 200 is a non toxic, non irritant, colorless and odorless liquid. It is used as a humecatant, lubricant, solvent, and viscosity modifier in many applications. It consists of a distribution of polymers of varying molecular weights with an average molecular weight of 200. view less | |
| SAPEG 400 | Sabic Europe | SAPEG 400 is a colorless and odorless liquid completely miscible in water and many organic solvents. It is non toxic, non irritant and is used as humecatant, lubricant, solvent and viscosity modifier in many applications. This product consists of a distri...view more SAPEG 400 is a colorless and odorless liquid completely miscible in water and many organic solvents. It is non toxic, non irritant and is used as humecatant, lubricant, solvent and viscosity modifier in many applications. This product consists of a distribution of polymers of varying molecular weights with an average molecular weight of 400. view less | |
| SAPEG 600 | Sabic Europe | SAPEG 600 a colorless and odorless liquid, completely miscible in water and many organic solvents. It consists of a distribution of polymers of varying molecular weights with an average molecular weight of 600. This product is non toxic and non irritant a...view more SAPEG 600 a colorless and odorless liquid, completely miscible in water and many organic solvents. It consists of a distribution of polymers of varying molecular weights with an average molecular weight of 600. This product is non toxic and non irritant and is used as humecatant, lubricant, solvent, and viscosity modifier in many applications. view less | |
| BYK®-1794 | BYK | BYK-1794 is an emission-free and silicone-free polymeric defoamer for solvent-borne, solvent-free, and UV systems. The additive is particularly recommended for high-solids and solvent-free systems on the basis of epoxy, PUR, polyaspartics, and UV systems....view more BYK-1794 is an emission-free and silicone-free polymeric defoamer for solvent-borne, solvent-free, and UV systems. The additive is particularly recommended for high-solids and solvent-free systems on the basis of epoxy, PUR, polyaspartics, and UV systems. It is suitable for pigmented and non-pigmented systems, has no effect on surface properties or transparency, and is effective during production and further processing. The additive consists of 100% solids and is solvent-free. BYK-1794 is used in thick layer systems, such as coatings for flooring. BYK-1794 offers excellent compatibility with solvent-free coatings for ballast tanks, tank interiors, etc. It is also highly effective in 100% polyurethane and polyaspartic acid ester systems for pipeline and concrete coatings as well as other solvent-free coating systems for a high degree of corrosion protection. In typical solvent-borne coil coating systems (e.g. polyester melamine or PUR systems), BYK-1794 is very compatible and produces good, spontaneous defoaming effects. Excellent results can be achieved in UV systems for wood and furniture coatings. view less | |
| ULTRAPEG® 200 | Indorama Ventures | ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 5...view more ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 535-590mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for leathers, detergents, lubricants, and paints. ULTRAPEG® 200 may also be used in bath oils, creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, hair spray and fragrances. view less | |
| ULTRAPEG® 300 | Indorama Ventures | ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 3...view more ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 356-394mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for agrochemical, ceramic, leathers, lubricants, paints, textiles, and paints. ULTRAPEG® 300 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, shampoos, deodorant and hair spray. view less | |
| ULTRAPEG® 400 | Indorama Ventures | ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 2...view more ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 267-295mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for agrochemical, rubber, ceramic, leathers, lubricants, textiles, and paints. ULTRAPEG® 400 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, soaps and hair spray. view less | |
| ULTRAPEG® 1000 | Indorama Ventures | ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a wa...view more ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a water content of 0.5% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for leathers, textiles, and paints. ULTRAPEG® 1000 may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps view less | |
| ULTRAPEG® 1500 F | Indorama Ventures | ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value...view more ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value of 70-83mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for leathers, detergents, lubricants, textiles, and paints. ULTRAPEG® 1500 F may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps, products for makeup (lipsticks, shadows, foundations) and toothpastes. view less | |
| ULTRAPEG® 4000 F | Indorama Ventures | ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value ...view more ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value of 25-315mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, rubber, ceramic, leathers, detergents and paints. ULTRAPEG® 4000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, deodorant, products for skin treatment and soap. view less | |
| ULTRAPEG® 6000 F | Indorama Ventures | ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value ...view more ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value of 17-20mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, rubber, ceramic, detergents and lubricants. ULTRAPEG® 6000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) and soap. view less | |
| ULTRAPEG® 8000 | Indorama Ventures | ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of...view more ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of 12.5-16.0mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points, and hardness consistency. This product is ideally used for adhesives, agrochemicals, rubber, ceramic, and detergents. ULTRAPEG® 8000 may also be used products for makeup (lipsticks, shadows, foundations). view less | |
| ULTRAPEG® 600 | Indorama Ventures | ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 17...view more ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 178-197mg KOH/g, and a water content of 0.25% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, leathers, detergents, lubricants, personal care, textiles, and paints. ULTRAPEG® 600 may also be used in creams, lotions and moisturizers, products for skin treatment, hair spray and soap. view less | |
| SCHWEGO® Wett 6242 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6242 can be used to disperse inorganic and organic pigments or carbon black. It is especially suitable for the production of universal pastes and highly filled systems. It shortens milling time, because pigment agglomerates are ruptured and ...view more SCHWEGO® Wett 6242 can be used to disperse inorganic and organic pigments or carbon black. It is especially suitable for the production of universal pastes and highly filled systems. It shortens milling time, because pigment agglomerates are ruptured and stabilised effectively. Hence, sedimentation and demixing of the pigments, respectively floating or flooding during application, are prevented. The colour strength of pigments is improved and the colour shade does not change even after long storage. SCHWEGO® wett 6242 is compatible with most resin systems. view less | |
| B-Tough™ C2x - Epoxy Functional Toughening Agent | Croda Coatings & Polymers | B-Tough™ C2x is an epoxy functional toughening agent for the coatings market to formulate epoxy systems with enhanced flexibility while hardness is maintained. B-Tough™ C2x is available in an easy to use, liquid form and provides good chemical and moistur...view more B-Tough™ C2x is an epoxy functional toughening agent for the coatings market to formulate epoxy systems with enhanced flexibility while hardness is maintained. B-Tough™ C2x is available in an easy to use, liquid form and provides good chemical and moisture resistance. view less | |
| Emulsogen® EPN 217 | Clariant International Ltd. | Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw s...view more Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw stability, electrolyte and sheer stability. view less | |
| Emulsogen® EPN 118 | Clariant International Ltd. | Emulsogen® EPN 118 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene. | |
| Genapol® X 150 | Clariant International Ltd. | Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate d...view more Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate dispersions to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. This product is used either during or after polymerization. view less | |
| Genapol® X 307 | Clariant International Ltd. | Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styren...view more Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation and improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. view less | |
| Emulsogen® EPN 407 | Clariant International Ltd. | Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadi...view more Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadiene / styrene latex. view less | |
| Emulsogen® EPN 287 | Clariant International Ltd. | Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadien...view more Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadiene / styrene latex. view less | |
| Emulsogen® EPA 1954 | Clariant International Ltd. | Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled p...view more Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled particle size and low coagulation during the polymerization process. view less | |
| CHAINGUARD® I-15 | LEHVOSS Group | CHAINGUARD® I-15 is a highly efficient scavenger of free radicals and is widely used to terminate (shortstop) the free-radical emulsion polymerizations of styrene-butadiene and acrylonitrile-butadiene in the production of SBR and NBR elastomers, respectiv...view more CHAINGUARD® I-15 is a highly efficient scavenger of free radicals and is widely used to terminate (shortstop) the free-radical emulsion polymerizations of styrene-butadiene and acrylonitrile-butadiene in the production of SBR and NBR elastomers, respectively. This product is also expected to be effective in stopping other polymerizations that proceed via a free radical mechanism, such as emulsion polymerizations of chloroprene and fluorinated olefins. view less | |
| Genapol® X 1005 | Clariant International Ltd. | Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, du...view more Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, during or after the polymerization process. This product can also be used as an emulsifier for bitumen emulsions. view less | |
| Tetramethoxysilane | Dalian Onichem Co., Ltd. | Tetramethoxysilane is a polymerization of silicone resins for use in paints and other surface modification applications. | Request Sample |
| Emulsogen® 4084 | Clariant International Ltd. | Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyv...view more Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyvinyl acetate, acrylate and styrene/acrylate dispersions to stabilize the rheological behaviour of the polymer dispersions and to improve the electrolyte and shear stability. It can be used in combination with other nonionic, anionic and cationic surfactants. view less | |
| Genapol® X 407 | Clariant International Ltd. | Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw st...view more Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. This product is also available as Genapol® X 407 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 86%. view less | |
| Tetraethyl Orthosilicate | Dalian Onichem Co., Ltd. | Tetraethyl Orthosilicate is a polymerization of silicone resins for use in paints and other surface modification applications. | Request Sample |
| Genapol® X 1003 | Clariant International Ltd. | Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electroly...view more Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1003 is added to the emulsion either before, during or after the polymerization process. This product can be used as an emulsifier for bitumen emulsions. view less | |
| Emulsogen® PF 20 S | Clariant International Ltd. | Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentra...view more Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. It can be used in combination with other nonionic and anionic surfactants. Emulsogen® PF 20 S is used as an emulsifier in emulsion polymerization, particularly in the manufacture of acrylate and styrene / acrylate dispersions. view less | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| Chromic Acetate Solution | McGean-Rohco, Inc. | Chromic Acetate Solution is used in pigments, drilling muds, textile mordants, leather tanning, and as catalysts for oxidation, polymerization, and emulsion hardening. | |
| Hostaphat® 1308 K | Clariant International Ltd. | Hostaphat® 1308 K is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used as an emulsifier in emulsion polymerization. | |
| Basic Chromic Acetate Powder | McGean-Rohco, Inc. | Basic Chromic Acetate Powder is used in pigments, drilling muds, textile mordants, leather tanning, and as catalysts for oxidation, polymerization, and emulsion hardening. | |
| Deuteron UV 1240 | Deuteron | Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240. The photoinitiator Deutero...view more Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240. The photoinitiator Deuteron UV 1240 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1240 is soluble in these binder systems including the usual solvents and reactive diluents. view less | Request Sample |
| Deuteron UV 1242 | Deuteron | The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 1242 may be used as a UV hard...view more The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 1242 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly silicones and epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1242. view less | Request Sample |
| Deuteron UV 1250 | Deuteron | The photoinitiator Deuteron UV 1250 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1250 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 1250 may be used as a UV hard...view more The photoinitiator Deuteron UV 1250 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1250 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 1250 may be used as a UV hardener for all binding agents that can be cationically polymerized and release coatings. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1250. view less | Request Sample |
| Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
| Deuteron UV 2257 | Deuteron | Deuteron UV 2257 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 2257. ...view more Deuteron UV 2257 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 2257. Deuteron UV 2257 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 2257 is soluble in these binder systems including common solvents and reactive diluents. view less | Request Sample |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| K-PURE® TAG-2678 | King Industries, Inc. | K-PURE® TAG-2678 is a quaternary ammonium blocked triflic acid thermal acid generator specifically made to be used in thermally cured microlithography coatings. It has a sharp activation profile and does not provide any volatile components when activated....view more K-PURE® TAG-2678 is a quaternary ammonium blocked triflic acid thermal acid generator specifically made to be used in thermally cured microlithography coatings. It has a sharp activation profile and does not provide any volatile components when activated. K-PURE® TAG-2678 is ideally appropriate for amino crosslinkable melamine, self-condensed melamine, glycoluril, urea or silanol and alkoxysilane crosslinkable resins. K-PURE® TAG-2678 can also be used to stimulize the polymerization of epoxy resins and ring opening polymerization of cyclic ethers as well as other monomers capable of undergoing cationic polymerization. This product appears as white crystals and is soluble in PGME, ethyl lactate, acetone, and propylene carbonate. It has limited solubility in PGMEA and is almost insoluble in water. view less | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| SR9054 | Sartomer Americas | SR9054 is a unique acid acrylate adhesion promoter that is typically recommended for use at 1 - 20% by weight in free-radical polymerization, UV and EB applications. It is recommended to maximize adhesion of coatings, inks and adhesives on glass and metal...view more SR9054 is a unique acid acrylate adhesion promoter that is typically recommended for use at 1 - 20% by weight in free-radical polymerization, UV and EB applications. It is recommended to maximize adhesion of coatings, inks and adhesives on glass and metals. view less | |
| Soluryl S-840 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-840 is a Styrene Acrylic resin for the neutral pH water-based products and is compatible with most common emulsions. It provides high gloss, good pigment dispersion, and good polymer surfactant for emulsion polymerization. | |
| Sunitor ITX | Yantai Suny Chem International Co., Ltd. | Sunitor ITX is a highly efficient Free Radical Type II solid photo initiator which is used to initiate the UV polymerization of chemically unsaturated pre-polymers (e.g. acrylates) in combination with tertiary amine synergists. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Exosin DS5 | EOC Group | Exosin DS5, disodium ethoxylated alcohol (C10-C12) half ester of succinic acid, is an anionic surfactant used as stabilizer and dispersing agent in resins and pigment systems. Exosin DS5 is also an excellent emulsifier for the emulsion polymerization. | |
| SR9051P | Sartomer Americas | SR9051P is a unique acidic triacrylate adhesion promoter that is typically recommended for use at 1-20% by weight in free-radical polymerization, UV and EB applications. This product is recommended to maximize adhesion of coatings, inks and adhesives on g...view more SR9051P is a unique acidic triacrylate adhesion promoter that is typically recommended for use at 1-20% by weight in free-radical polymerization, UV and EB applications. This product is recommended to maximize adhesion of coatings, inks and adhesives on glass and metals. view less | |
| Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Octosol 828 | Tiarco Chemical | Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is f...view more Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is formaldehyde free. view less | |
| Genapol® X 407 Terra | Clariant International Ltd. | Genapol® X 407 Terra is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 Terra in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and fr...view more Genapol® X 407 Terra is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 Terra in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. Genapol® X 407 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 86%. view less | |
| GENORAD* 23 | Rahn AG | GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV c...view more GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations. view less | Request Sample |
| Drewplus™ TS-2200 Foam Control Agent | Ashland | Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture...view more Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. view less | |
| Drewplus™ T-1202E Foam Control Agent | Ashland | Drewplus™ T-1202E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Because of its excellent compatibility, Drewplus™ T-1202E is particularly recommended for SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. | |
| Emulsogen® LCN 118 | Clariant International Ltd. | Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte sta...view more Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte stability of polymer dispersions. Emulsogen® LCN 118 is also used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Chisorb® 593 | DBC Europe GmbH | Chisorb® 593 is a reactive absorber of the acrylic phenylbenzotriazole class, and it was developed specifically for improving compatibility, solubility, migration and reactivity properties. It is suggested to be added during the polymerization stage for a...view more Chisorb® 593 is a reactive absorber of the acrylic phenylbenzotriazole class, and it was developed specifically for improving compatibility, solubility, migration and reactivity properties. It is suggested to be added during the polymerization stage for acrylic resin, rubber and unsaturated polyester etc. This product appears as a light brown to yellow powder. view less | |
| Troythix™ 21BA | Arxada – Troy Corporation | Troythix™ 21BA is a polymerized vegetable oil derivative intended for use in pigmented, non-aqueous oxidizing systems. Troythix™ 21BA works on the particle/vehicle interface where a structure based on electrical charge is set up between particles, resulti...view more Troythix™ 21BA is a polymerized vegetable oil derivative intended for use in pigmented, non-aqueous oxidizing systems. Troythix™ 21BA works on the particle/vehicle interface where a structure based on electrical charge is set up between particles, resulting in controlled flocculation. view less | |
| K-PURE® CXC-1612 | King Industries, Inc. | K-PURE® CXC-1612 is an antimony hexafluoride based catalyst that is for thermal initiated cationic polymerization. It appears as an off white powder and offers viscosity stability, cure response, and solubility. This product can be applied in PWB, conform...view more K-PURE® CXC-1612 is an antimony hexafluoride based catalyst that is for thermal initiated cationic polymerization. It appears as an off white powder and offers viscosity stability, cure response, and solubility. This product can be applied in PWB, conformal coatings, cleaners & strippers, and adhesives & sealants. view less | |
| Methyltrimethoxysilane | Dalian Onichem Co., Ltd. | Methyltrimethoxysilane is a colorless and transparent liquid which boils at 102°C. It can be used to polymerize with other monomers to be special and high molecular compounds. Methyltrimethoxysilane can also be used as a cross-linking agent for RTV, as c...view more Methyltrimethoxysilane is a colorless and transparent liquid which boils at 102°C. It can be used to polymerize with other monomers to be special and high molecular compounds. Methyltrimethoxysilane can also be used as a cross-linking agent for RTV, as coupling agent for inorganic materials and as a strengthening agent for laminated plastic products. view less | Request Sample |
| Emulsogen® APS 100 | Clariant International Ltd. | Emulsogen® APS 100 is a copolymerizable anionic emulsifier and hydrophilic monomer. It is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions. The advantage...view more Emulsogen® APS 100 is a copolymerizable anionic emulsifier and hydrophilic monomer. It is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions. The advantages of Emulsogen® APS 100 in comparison to conventional emulsifiers are the ability of copolymerisation to reduce migration, improved freeze- thaw, electrolyte and shear stability of the polymer emulsion and reduced water sensitivity and water up-take of the polymer film. view less | |
| Methyltriethoxysilane | Dalian Onichem Co., Ltd. | Methyltriethoxysilane is a colorless and transparent liquid which boils at 143°C. It is used to synthesize methyl silicone resins and water-proofing adhesives, to polymerize with other monomers to be special and high molecular compounds. Methyltriethoxysi...view more Methyltriethoxysilane is a colorless and transparent liquid which boils at 143°C. It is used to synthesize methyl silicone resins and water-proofing adhesives, to polymerize with other monomers to be special and high molecular compounds. Methyltriethoxysilane can also be used as a coupling agent for inorganic materials and as strengthening agent for laminated plastic products. view less | Request Sample |
| Sunitor ITX | Yantai Suny Chem International Co., Ltd. | Sunitor ITX is a highly efficient Free Radical Type II solid photoinitiator, used to initiate the UV polymerization of chemically unsaturated pre-polymers (e.g. acrylates) in combination with tertiary amine synergists. This product is mainly used in UV cu...view more Sunitor ITX is a highly efficient Free Radical Type II solid photoinitiator, used to initiate the UV polymerization of chemically unsaturated pre-polymers (e.g. acrylates) in combination with tertiary amine synergists. This product is mainly used in UV curable, clear and pigmented systems, such as UV coatings, inks, adhesives, and photoresists. view less | |
| Octa-Soligen® Cobalt 6 (xylene) | OMG Borchers GmbH | Octa-Soligen® Cobalt 6 (xylene) is a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will initiate as a result of rapid decomposition of the organic peroxides. This product i...view more Octa-Soligen® Cobalt 6 (xylene) is a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will initiate as a result of rapid decomposition of the organic peroxides. This product is based on metal salts of 2-ethylhexanic acid (octoates) or its isomers. It is used in unsaturated polyesters. view less | |
| IPHA I-15 | LEHVOSS Group | IPHA I-15 is a primary alkylhydroxylamine that has shown excellent performance as a shortstop for styrene-butadiene emulsion polymerization. It is also a very effective oxygen scavenger/corrosion inhibitor for water treatment applications. This product ma...view more IPHA I-15 is a primary alkylhydroxylamine that has shown excellent performance as a shortstop for styrene-butadiene emulsion polymerization. It is also a very effective oxygen scavenger/corrosion inhibitor for water treatment applications. This product may also be useful in other application areas such as photographic processing, monomer stabilization, and as a reducing agent. view less |
