| Resiflow® L-64F | Estron Chemical, Inc. | Resiflow® L-64F is a carboxyl functional, viscous acrylic flow control agent that can be used in high solids, solvent borne, UV curable, and other paint systems. Resiflow® L-64F can act as an air release agent, reduce or eliminate surface defects such as ...view more Resiflow® L-64F is a carboxyl functional, viscous acrylic flow control agent that can be used in high solids, solvent borne, UV curable, and other paint systems. Resiflow® L-64F can act as an air release agent, reduce or eliminate surface defects such as craters, pinholes and fisheyes, as well as improve flow and leveling. The recommended dosage of Resiflow® L-64F is 0.2-1.5% based on binder solids. view less | |
| Hauthane L-3033 | Hauthaway | Hauthane L-3033 is a formulated polyurethane topcoat which gives a soft, silky feel at low gloss levels (2-4 gloss at 60 degree geometry). It is designed primarily for use on synthetic leather-like surfaces such as PVC, urethane, and various TPO's, as well as plastic films and other smooth surfaces. L-3033 does not have defoamer...view more Hauthane L-3033 is a formulated polyurethane topcoat which gives a soft, silky feel at low gloss levels (2-4 gloss at 60 degree geometry). It is designed primarily for use on synthetic leather-like surfaces such as PVC, urethane, and various TPO's, as well as plastic films and other smooth surfaces. L-3033 does not have defoamer or wetting agent, allowing the formulator flexibility of selection for his specific application. May be applied by rotogravure, wire wound rod and spray. view less | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...view more Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less | |
| Resiflow® LV | Estron Chemical, Inc. | Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...view more Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less | |
| SP-115 | Macro Polymers Pvt. Ltd. | SP-115 is a polyamide resin. This product should be used in combination with epoxy coatings as a hardener. It can be used in cold-curing, solvent-based coatings for good adhesion, flexibility, and anti-corrosion protection. | |
| SETAL® A F 26 X | Allnex | SETAL® A F 26 X is very fast drying and curing, high resistance to yellowing, good weather stability and good anti-corrosion properties. | Request Sample |
| Grilonit® RV 1814 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1814 is a C13/C15-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good wetting and air release behavior, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing ...view more Grilonit® RV 1814 is a C13/C15-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good wetting and air release behavior, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. view less | |
| Siltech® C-442 | Siltech Corp. | Siltech® C-442 is a 100% active polyether siloxane copolymer that is primarily used to eliminate cratering and to improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip,...view more Siltech® C-442 is a 100% active polyether siloxane copolymer that is primarily used to eliminate cratering and to improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip, anti-blocking and flow. Siltech®C-442 prevents pigment flotation and provides mar resistance. view less | |
| Deco-Coat DC-2510 | Epoxies, Etc. | Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelera...view more Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelerated with mild heat and contains a proprietary air release additive which allows for an air bubble free high gloss dome coating. view less | |
| SP-140 | Macro Polymers Pvt. Ltd. | SP-140 is a polyamide resin. This product should be used in combination with an epoxy coating as a hardener, in order to induce good adhesion, flexibility, and anti-corrosion protections. It can be used in cold-curing, solvent-containing coatings for st...view more SP-140 is a polyamide resin. This product should be used in combination with an epoxy coating as a hardener, in order to induce good adhesion, flexibility, and anti-corrosion protections. It can be used in cold-curing, solvent-containing coatings for steel and mineral substrates, and in construction coatings. view less | |
| SP-160 | Macro Polymers Pvt. Ltd. | SP-160 is a polyamide resin. This product should be used in combination with an epoxy coating as a hardener, in order to induce good adhesion, flexibility, and anti-corrosion protection. It can be used in cold-curing, solvent-containing coatings for ste...view more SP-160 is a polyamide resin. This product should be used in combination with an epoxy coating as a hardener, in order to induce good adhesion, flexibility, and anti-corrosion protection. It can be used in cold-curing, solvent-containing coatings for steel and mineral substrates, and in construction coatings. view less | |
| SP-125 | Macro Polymers Pvt. Ltd. | SP-125 is a polyamide resin. This product should be used in combination with epoxy coatings as a hardener, in order to induce good adhesion, flexibility, and anti-corrosion protection. It can be used in cold-curing, solvent-containing coatings for steel...view more SP-125 is a polyamide resin. This product should be used in combination with epoxy coatings as a hardener, in order to induce good adhesion, flexibility, and anti-corrosion protection. It can be used in cold-curing, solvent-containing coatings for steel and mineral substrates, and in coatings for paints and adhesives. view less | |
| Disvamine-701 | D.S.V. Chemicals Pvt. Ltd. | Disvamine-701 is a butylated amino resin. This product is a melamine formaldehyde resin. It can be used in highly-reactive curing agents for stoving paints, roller coatings, and foil inks. It can also be used in mar-proof varnishes and acid-catalyzed w...view more Disvamine-701 is a butylated amino resin. This product is a melamine formaldehyde resin. It can be used in highly-reactive curing agents for stoving paints, roller coatings, and foil inks. It can also be used in mar-proof varnishes and acid-catalyzed wood finishes. view less | |
| ADDITOL® XW 6528 | Allnex | Additol® XW 6528 is a water dilutable grinding medium which can be used for colour- and shading pigment pastes. It is compatible in waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV curing systems, anodic deposition dipping lacquers,...view more Additol® XW 6528 is a water dilutable grinding medium which can be used for colour- and shading pigment pastes. It is compatible in waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV curing systems, anodic deposition dipping lacquers, PU- dispersions and plastic dispersions. Additol® XW 6528 is co-crosslinking in melamine and isocyanate curing systems. view less | Request Sample |
| Resiflow® L-3075 | Estron Chemical, Inc. | Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellen...view more Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellent air release, improved film characteristics, and resistance to dirt-pick up. view less | |
| Vilacryl 848J60 | Vil Resins | Vilacryl 848J60 is a 2-pack isocyanate curing acrylic resin that can be used in vehicle refinishes and anti-graffiti coatings. This product contains 4.5% hydroxyls and 60% non-volatile compounds. | |
| Epokukdo YD-128S | Kukdo Chemical Co., Ltd. | Epokukdo YD-128S is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic...view more Epokukdo YD-128S is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128S, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128 | Kukdo Chemical Co., Ltd. | Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A. It has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128 is cured together with the various hardeners (polyamide resin, aromatic polyamine, alipha...view more Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A. It has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128 is cured together with the various hardeners (polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Resiflow® LV-67 | Estron Chemical, Inc. | Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1....view more Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best processing method and the optimum concentration of the additive. view less | |
| Epokukdo YD-128SH | Kukdo Chemical Co., Ltd. | Epokukdo YD-128SH is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance etc. Epokukdo YD-128SH is cured together with the various hardeners(polyamide resin, aromatic pol...view more Epokukdo YD-128SH is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance etc. Epokukdo YD-128SH is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128SH, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128SM | Kukdo Chemical Co., Ltd. | Epokukdo YD-128SM is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128SM is cured together with the various hardeners(polyamide resin, aromatic po...view more Epokukdo YD-128SM is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128SM is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128SM, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128H | Kukdo Chemical Co., Ltd. | Epokukdo YD-128H is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128H is cured together with the various hardeners(polyamide resin, aromatic poly...view more Epokukdo YD-128H is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128H is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128H, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128M | Kukdo Chemical Co., Ltd. | Epokukdo YD-128M is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128M is cured together with the various hardeners(polyamide resin, aromatic poly...view more Epokukdo YD-128M is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128M is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128M, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128A | Kukdo Chemical Co., Ltd. | Epokukdo YD-128A is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128A is cured together with the various hardeners(polyamide resin, aromatic poly...view more Epokukdo YD-128A is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128A is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128A, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| SYNTHALAT A 077 | Synthopol Chemie Germany | SYNTHALAT A 077 is a polyisocyanate-curing resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to chemical a...view more SYNTHALAT A 077 is a polyisocyanate-curing resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to chemical attack and weathering. view less | |
| SYNTHALAT A 078 | Synthopol Chemie Germany | SYNTHALAT A 078 is a polyisocyanate-curing acrylic resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to ch...view more SYNTHALAT A 078 is a polyisocyanate-curing acrylic resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to chemical attack and weathering. view less | |
| Novalkyd S1233-70BA | Novaresine S.r.l | Novalkyd S1233-70BA is a siccative short oil alkyd phenolic modified resin that displays good hardness, flexibility and chemical resistance properties. This makes it ideal for fast curing varnishes, along with industrial high-quality enamels, anti-rust pr...view more Novalkyd S1233-70BA is a siccative short oil alkyd phenolic modified resin that displays good hardness, flexibility and chemical resistance properties. This makes it ideal for fast curing varnishes, along with industrial high-quality enamels, anti-rust primers and sandable sealers for wood and metal. view less | |
| Razeen® SR 5199 | Jubail Chemical Industries Co. | Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enam...view more Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enamels as well as anti-corrosive paints. view less | |
| ADDITOL® XW 6591 | Allnex | ADDITOL® XW 6591 is a water dilutable, modified polyester-acrylate polymer. It can be used for colour- and shading pigment pastes. It is compatible with waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV- curing systems, PU- dispersio...view more ADDITOL® XW 6591 is a water dilutable, modified polyester-acrylate polymer. It can be used for colour- and shading pigment pastes. It is compatible with waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV- curing systems, PU- dispersions and plastic dispersions. view less | Request Sample |
| SYNTHALAT A 150 | Synthopol Chemie Germany | SYNTHALAT A 150 is a polyisocyanate-curing acrylic resin. It is recommended for use in 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings affording high mechanical strength, good adhesion ...view more SYNTHALAT A 150 is a polyisocyanate-curing acrylic resin. It is recommended for use in 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings affording high mechanical strength, good adhesion and resistance to weathering. view less | |
| Domide G-5022X70 | Kukdo Chemical Co., Ltd. | Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well sui...view more Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well suited for use in maintenance coatings and primers. view less | |
| DOUBLEMER® 6MX75-E | DBC Europe GmbH | DOUBLEMER® 6MX75-E is an acrylate oligomer. It shows excellent adhesion, fast curing, low shrinkage, good aluminum powder orientation, good anti-yellowing and excellent leveling. DOUBLEMER® 6MX75-E can also be used as an adhesion promoter, to decrease coa...view more DOUBLEMER® 6MX75-E is an acrylate oligomer. It shows excellent adhesion, fast curing, low shrinkage, good aluminum powder orientation, good anti-yellowing and excellent leveling. DOUBLEMER® 6MX75-E can also be used as an adhesion promoter, to decrease coating shrinkage, and to improve matting efficiency. view less | |
| BENASOL SI 25 | Benasedo | BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and p...view more BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and pigmented topcoats for wood forniture with high characteristics of mar resistance and high glossy also after polishing , applied in very fast curing cycle by courtain coating or spray. view less | Request Sample |
| SYNTHALAT A 125 HS | Synthopol Chemie Germany | SYNTHALAT A 125 HS is a polyisocyanate-curing acrylic resin. It is recommended for use in 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for "high-solid" industrial coatings offering good mechanical strength ...view more SYNTHALAT A 125 HS is a polyisocyanate-curing acrylic resin. It is recommended for use in 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for "high-solid" industrial coatings offering good mechanical strength and resistance to chemical attack and weathering. view less | |
| Resiflow® L-67 | Estron Chemical, Inc. | Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and lev...view more Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and leveling (orange peel) and can improve the flexibility of coatings. Resiflow® L-67 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems, as the product has compatibility with all coating resins. view less | |
| SYNTHALAT A 088 MS | Synthopol Chemie Germany | SYNTHALAT A 088 MS is a polyisocyanate-curing acrylic resin. It is supplied as 60% in Shellsol A. This product is designed for 2-pack "medium-solid" industrial coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, offering...view more SYNTHALAT A 088 MS is a polyisocyanate-curing acrylic resin. It is supplied as 60% in Shellsol A. This product is designed for 2-pack "medium-solid" industrial coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, offering good resistance to chemical attack and weathering. view less | |
| SETALUX® D A 160 X | Allnex | SETALUX® D A 160 X is an acrylic polyol with 2.7% OH (calculated on non-volaties) which is used in combination with aliphatic polyisocyanates based on hexamethylene diisocyanate to formulate air drying curing and forced drying coatings with good weather s...view more SETALUX® D A 160 X is an acrylic polyol with 2.7% OH (calculated on non-volaties) which is used in combination with aliphatic polyisocyanates based on hexamethylene diisocyanate to formulate air drying curing and forced drying coatings with good weather stability and good resistance to water, washing solutions and chemicals. view less | Request Sample |
| SETALUX® D A 160 H X | Allnex | SETALUX® D A 160 H X is an acrylic polyol with 2.7 % OH (calculated on non-volaties) which is used in combination with aliphatic polyisocyanates based on hexamethylene diisocyanate to formulate air drying curing and forced drying coatings with good weathe...view more SETALUX® D A 160 H X is an acrylic polyol with 2.7 % OH (calculated on non-volaties) which is used in combination with aliphatic polyisocyanates based on hexamethylene diisocyanate to formulate air drying curing and forced drying coatings with good weather stability and good resistance to water, washing solutions andchemicals. view less | Request Sample |
| Nippolan 3004 | Tosoh Corporation | Nippolan 3004 is a polyurethane adhesive and tacking agent in an ethyl acetate solvent. This product is that is ideal for use in film lamination applications. | |
| SYNTHALAT A 090 | Synthopol Chemie Germany | SYNTHALAT A 090 is a polyisocyanate-curing acrylic resin. It is supplied as 60% in xylene/butyl acetate (1:1). This product is designed for 2-pack coatings which are air- and oven-drying in combination with cycloaliphatic polyisocyanate adducts. It is pri...view more SYNTHALAT A 090 is a polyisocyanate-curing acrylic resin. It is supplied as 60% in xylene/butyl acetate (1:1). This product is designed for 2-pack coatings which are air- and oven-drying in combination with cycloaliphatic polyisocyanate adducts. It is primarily used for coating plastics, as well as ABS copolymers. view less | |
| Araldite® GT 6099 | Jubail Chemical Industries Co. | Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of he...view more Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of heat-curing primers and enamels as well as anti-corrosion paints when combined with polyisocyanates. view less | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...view more BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. view less | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...view more BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. view less | |
| SYNTHALAT A 156 HS | Synthopol Chemie Germany | SYNTHALAT A 156 HS is a polyisocyanate-curing high-solid acrylic resin. It is recommended for use in high-solid 2-pack coatings which are air- and oven-drying in combination with polyisocyanates, affording high strength and resistance to chemical attack a...view more SYNTHALAT A 156 HS is a polyisocyanate-curing high-solid acrylic resin. It is recommended for use in high-solid 2-pack coatings which are air- and oven-drying in combination with polyisocyanates, affording high strength and resistance to chemical attack and weathering. The coatings are suitable in particular for large-capacity vehicles and cars, and for industrial coatings. view less | |
| Resiflow® L-45D | Estron Chemical, Inc. | Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and or...view more Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel. Resiflow® L-45D can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Resiflow® LF | Estron Chemical, Inc. | Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...view more Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Epoxies® 20-3001 NC | Epoxies, Etc. | Epoxies® 20-3001 NC is a low viscosity, unfilled epoxy potting and encapsulating resin which forms a bubble free glass like finish upon curing. It is either black or clear and dose not contain any solvents. with a 1 to 1 mix ratio and lack of fillers, it ...view more Epoxies® 20-3001 NC is a low viscosity, unfilled epoxy potting and encapsulating resin which forms a bubble free glass like finish upon curing. It is either black or clear and dose not contain any solvents. with a 1 to 1 mix ratio and lack of fillers, it is an ideal material for meter mixes and dispense equipment. view less | |
| Resiflow® L5 | Estron Chemical, Inc. | Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel,...view more Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Idroben EP 5595 | Benasedo | Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. Thi...view more Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. This product has a colour [G.H.] maximum of 12, an A.V. solids content of 45-55, and a viscosity [G.H.] of Z-Z2. view less | Request Sample |
| WorléeKyd SM 433 | Worlée-Chemie G.m.b.H. | WorléeKyd SM 433 is a short oil, extremely fast drying alkyd resin used for the production of air drying and oven curing primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 433 is compatible with short oil alkyd resins and wi...view more WorléeKyd SM 433 is a short oil, extremely fast drying alkyd resin used for the production of air drying and oven curing primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 433 is compatible with short oil alkyd resins and with some medium oil types. It is partially compatible with vinyl mixed polymerisates, e. g. Laroflex, BASF. view less | |
| Epokukdo YD-134L | Kukdo Chemical Co., Ltd. | Epokukdo YD-134L is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-134L has good adhesion, excellent mechanical properties and chemical resistance. Because of its excellent properties after curing, YD-134L is mainly recommend...view more Epokukdo YD-134L is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-134L has good adhesion, excellent mechanical properties and chemical resistance. Because of its excellent properties after curing, YD-134L is mainly recommended for anti-corrosive industrial coating, marine paint, civil engineering, and various adhesives. YD-134L has higher EEW, so that it needs less quantity of curatives and accelerators than standard liquid resin such as YD -128. view less | |
| WorléeKyd B 850 | Worlée-Chemie G.m.b.H. | WorléeKyd B 850 is a medium oil, fast drying alkyd resin used for the production of high quality air and heat drying industrial, automobile, and radiator enamels. This grade has a non volatile content of 55% ± 1. Because of its very quick drying and extre...view more WorléeKyd B 850 is a medium oil, fast drying alkyd resin used for the production of high quality air and heat drying industrial, automobile, and radiator enamels. This grade has a non volatile content of 55% ± 1. Because of its very quick drying and extremely low tendency to yellowing, high quality air- and heat-drying industrial enamels can be produced with W´Kyd B 850. Also, W´Kyd B 850 is used for the production of car-repair and radiator enamels with very rapid flash-off and curing and high film build. view less | |
| Resiflow® PL-220 | Estron Chemical, Inc. | Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple ...view more Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| WorléeKyd RM 232 | Worlée-Chemie G.m.b.H. | WorléeKyd RM 232 is a short oil drying alkyd resin used for the manufacture of air and forced drying primers and top coats. It is also used for acid curing systems. This product is based on conjugated castor oil and special fatty acids. W´Kyd RM 232 is us...view more WorléeKyd RM 232 is a short oil drying alkyd resin used for the manufacture of air and forced drying primers and top coats. It is also used for acid curing systems. This product is based on conjugated castor oil and special fatty acids. W´Kyd RM 232 is used in conjunction with reactive unmodified urea and/or melamine resins for stoving primers, top coats and one coat paints. view less | |
| AB-72FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. | |
| MOR-SHINE™ E | Synthomer | Mor-Shine E is a dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance. Mor-Shine E is used for general purpose finishes that respond to low and high maintenance schedules | |
| Polydo ED-500 | Kukdo Chemical Co., Ltd. | Polydo ED-500 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| Polydo ED-750 | Kukdo Chemical Co., Ltd. | Polydo ED-750 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| SYNTHALAT WA-TH 2242 | Synthopol Chemie Germany | SYNTHALAT WA-TH 2242 is a water-dilutable hydroxyl acrylic resin. It is recommended for use in combination with hardener, like (cyclo-) aliphatic polyisocyanates and melamine resins for air- and oven drying topcoats for plastic, wood and metal substrates ...view more SYNTHALAT WA-TH 2242 is a water-dilutable hydroxyl acrylic resin. It is recommended for use in combination with hardener, like (cyclo-) aliphatic polyisocyanates and melamine resins for air- and oven drying topcoats for plastic, wood and metal substrates with very high hardness, high gloss, good adhesion, high mechanical properties and tough elasticity, water-, weather and very high chemical -resistance. This product is developed for extremely high chemical resistance and tough elasticity. view less | |
| Novalkyd M1462-50AN | Novaresine S.r.l | Novalkyd M1462-50AN is a medium oil resin that displays hardness, curing and color retention properties in low cost enamels. It is also suitable to formulate flatting for wood and primers for metal, offering high corrosion resistance. | |
| CRYLCOAT® 1582-6 | Allnex | CRYLCOAT® 1582-6 is a high reactive carboxyl functional polyester resin for use in 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1582-6 exhibit good flow, high degree of adhesion, flexibility and especially in mar- and scratch resistance. | Request Sample |
| Epokukdo YD-136 | Kukdo Chemical Co., Ltd. | Epokukdo YD-136 is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-136 has good adhesion, excellent mechanical properties and chemical resistance. Due to its excellent properties after curing, YD-136 is mainly recommended for ...view more Epokukdo YD-136 is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-136 has good adhesion, excellent mechanical properties and chemical resistance. Due to its excellent properties after curing, YD-136 is mainly recommended for anti-corrosive industrial coating, marine paint, civil engineering, coal tar epoxy and various adhesives. Due to its high viscosity and higher EEW it needs less quantities of curatives and accelerators than standard liquid resin such as YD-128. view less | |
| Docure YC-230H | Kukdo Chemical Co., Ltd. | Docure YC-230H of casting resin system is a liquid type medium viscosity Bisphenol-A epoxy resin and medium-viscosity Hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...view more Docure YC-230H of casting resin system is a liquid type medium viscosity Bisphenol-A epoxy resin and medium-viscosity Hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. view less | |
| Ucopol OL 18 50 OD | S.A.P.I.C.I. SpA | Ucopol OL 18 50 OD is an oleo-urethanic resin. This product dries quickly and has good weather resistance and hardness. It can be used in anti-corrosive paints and as an impregnating agent for wood. This product is obtained from renewable raw materials...view more Ucopol OL 18 50 OD is an oleo-urethanic resin. This product dries quickly and has good weather resistance and hardness. It can be used in anti-corrosive paints and as an impregnating agent for wood. This product is obtained from renewable raw materials. view less | |
| Ucopol OL 18 50 X | S.A.P.I.C.I. SpA | Ucopol OL 18 50 X is an oleo-urethanic resin. This product dries quickly with good weather resistance and hardness. It can be used in anti-corrosive paints and as an impregnating agent for wood. This product has been obtained from renewable raw material...view more Ucopol OL 18 50 X is an oleo-urethanic resin. This product dries quickly with good weather resistance and hardness. It can be used in anti-corrosive paints and as an impregnating agent for wood. This product has been obtained from renewable raw materials. view less | |
| EE57 | IBA Kimya San. ve Tic. A.S. | EE57 is an epoxy powder coating with low temperature curing epoxy resins and special cross linking agents providing chemical and corrosion resistance. It creates a highly elastic film with excellent mechanical properties and can be used on a variety of su...view more EE57 is an epoxy powder coating with low temperature curing epoxy resins and special cross linking agents providing chemical and corrosion resistance. It creates a highly elastic film with excellent mechanical properties and can be used on a variety of substrates. It contains no solvents and therefore exhibits a low impact to the environment. view less | |
| WorléeThix A 1420 | Worlée-Chemie G.m.b.H. | WorléeThix A 1420 is a thixotropic, hydroxyfunctional pure acrylate for the manufacture of two component top coats. This grade has a non volatile content of 50% ± 2. W´Thix A 1420 can be combined for air and forced drying 2 pack wood and plastic coatings...view more WorléeThix A 1420 is a thixotropic, hydroxyfunctional pure acrylate for the manufacture of two component top coats. This grade has a non volatile content of 50% ± 2. W´Thix A 1420 can be combined for air and forced drying 2 pack wood and plastic coatings. After curing, the coating exhibits hardness, chemical and weather resistance. Application fields for W´Thix A 1420 are pigmented and colourless wood coating systems. In these coating formulations W´Thix A 1420 is used for adjusting the stability at vertical surfaces. view less | |
| Resiflow® L | Estron Chemical, Inc. | Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve fl...view more Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Picassian® XL-732 | Stahl Polymers | Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good ad...view more Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. view less | |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...view more Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. view less | |
| Resipur® 9187 | Omnova Solutions | Resipur® 9187 is an opaque pinky liquid, free of impurities and is an orthophtalic unsaturated polyester resin of medium reactivity, pre-accelerated, and thixotropic which contains paraffin. It presents a low styrene emission during the curing process. Du...view more Resipur® 9187 is an opaque pinky liquid, free of impurities and is an orthophtalic unsaturated polyester resin of medium reactivity, pre-accelerated, and thixotropic which contains paraffin. It presents a low styrene emission during the curing process. Due to this fact, Resipur® 9187 is considered to be an ecological resin, and is used for rigid laminates produced by hand lay-up or spray-up. view less | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...view more Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. view less | |
| Resiflow® L-65F | Estron Chemical, Inc. | Resiflow® L-65F is an acrylic flow control agent that is used mainly in solvent borne automotive clearcoats such as two component urethanes, polyester-melamine or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F also affo...view more Resiflow® L-65F is an acrylic flow control agent that is used mainly in solvent borne automotive clearcoats such as two component urethanes, polyester-melamine or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. view less | |
| Epokukdo YDF-165 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-165 is a Bisphenol-F type liquid epoxy resin diluted with BGE , which is very low viscosity. YDF-165 has the excellent mechanical, adhesive, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due ...view more Epokukdo YDF-165 is a Bisphenol-F type liquid epoxy resin diluted with BGE , which is very low viscosity. YDF-165 has the excellent mechanical, adhesive, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due to its special properties, YDF-165 is generally used in coatings, moldings, adhesives, construction and civil works, and composite applications for the low VOC or non-solvent system. view less | |
| Picassian® XL-725 | Stahl Polymers | Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and ma...view more Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. view less | |
| PE10 | IBA Kimya San. ve Tic. A.S. | PE10 is a thermosetting polyester powder providing durable outdoor coatings having low specular gloss and good mar resistance. It contains no solvents and therefore exhibits a low impact to the environment. It maintains good yellowing resistance over tim...view more PE10 is a thermosetting polyester powder providing durable outdoor coatings having low specular gloss and good mar resistance. It contains no solvents and therefore exhibits a low impact to the environment. It maintains good yellowing resistance over time and temperature. It can be used on a variety of substrates including aluminium and steel. view less | |
| Epokukdo YDF-170 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-170 is a liquid type epoxy resins derived from BPF and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-170 has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appr...view more Epokukdo YDF-170 is a liquid type epoxy resins derived from BPF and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-170 has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due to its special properties, YDF-170 is generally used in coatings, moldings, adhesive, construction and civil works, and composite applications for the low VOC or non-solvent system. view less | |
| SETALUX® 91767 VX-60 | Allnex | SETALUX® 91767 VX-60 (formerly SETALUX® 10-1604) is an acrylic polyol with 4.5% OH that is modified with sag control agent (SCA). When used with aliphatic isocyanates, SETALUX® 91767 VX-60 will give excellent anti-sag properties, good coating appearance a...view more SETALUX® 91767 VX-60 (formerly SETALUX® 10-1604) is an acrylic polyol with 4.5% OH that is modified with sag control agent (SCA). When used with aliphatic isocyanates, SETALUX® 91767 VX-60 will give excellent anti-sag properties, good coating appearance and good adhesion as well as durability. SETALUX® 91767 VX-60 will also provide good chemical and gasoline resistance plus improved application properties. view less | Request Sample |
| Ucopol OL 17 60 OD | S.A.P.I.C.I. SpA | Ucopol OL 17 60 OD is an oleo-urethanic resin. This product has good weather and abrasion resistance. It can be used as a coating for window frames and boats. It can also be used in anti-corrosive paints and as an impregnating agent for wood. This pro...view more Ucopol OL 17 60 OD is an oleo-urethanic resin. This product has good weather and abrasion resistance. It can be used as a coating for window frames and boats. It can also be used in anti-corrosive paints and as an impregnating agent for wood. This product has been obtained from renewable raw materials. view less | |
| Ucopol OL 89 55 OD | S.A.P.I.C.I. SpA | Ucopol OL 89 55 OD is an oleo-urethanic resin. This product has good weather and abrasion resistance. It can be used as a coating for window frames and boats. It can also be used in anti-corrosive paints and as an impregnating agent for wood. This pro...view more Ucopol OL 89 55 OD is an oleo-urethanic resin. This product has good weather and abrasion resistance. It can be used as a coating for window frames and boats. It can also be used in anti-corrosive paints and as an impregnating agent for wood. This product has been obtained from renewable raw materials. view less | |
| SiSiB® PC5420 | SiSiB SILICONES | SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second back...view more SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| GMA-400 | Estron Chemical, Inc. | GMA-400 is a solid, high-functionality glycidyl acrylic polymer capable of reacting with carboxyl and amine functional compounds. It can be used either as a sole curing agent for acid-functional polyester resins to make polyester/acrylic hybrids, or as a ...view more GMA-400 is a solid, high-functionality glycidyl acrylic polymer capable of reacting with carboxyl and amine functional compounds. It can be used either as a sole curing agent for acid-functional polyester resins to make polyester/acrylic hybrids, or as a fortifying additive resin at low loadings in systems such as polyester/TGIC. GMA-400 can also be used in hybrid systems to boost crosslink density and increase film hardness/chemical resistance. view less | |
| Epokukdo YDF-175 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-175 is a liquid type epoxy resins derived from BPF and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-175 has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appr...view more Epokukdo YDF-175 is a liquid type epoxy resins derived from BPF and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-175 has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due to its special properties, YDF-175 is generally used in coatings, moldings, adhesive, construction and civil works, and composite applications for the low VOC or non-solvent system. YDF-175 is specially designed for non-crystalline type in cold weather. view less | |
| SiSiB® PC5423 | SiSiB SILICONES | SiSiB® PC5423 is a transparent liquid containing 32% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is used to deposit silicic acid formed as a result of complete hy...view more SiSiB® PC5423 is a transparent liquid containing 32% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is used to deposit silicic acid formed as a result of complete hydrolysis; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinker component in cold curing silicone rubber systems; as a hardening component in dentistry for impression materials and as binder for embedding material; or as a binder in precision foundry industry. view less | |
| SiSiB® PC5424 | SiSiB SILICONES | SiSiB® PC5424 is a transparent liquid containing 40% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can ...view more SiSiB® PC5424 is a transparent liquid containing 40% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can be used as a binder in zinc-rich (corrosion resistant) coating, as a starting material for sol-gel process, as a crosslinker component in cold curing silicone rubber systems, as a hardening component in dentistry for impression materials and as binder for embedding material, or as a binder in precision foundry industry view less | |
| SiSiB® PC5425 | SiSiB SILICONES | SiSiB® PC5425 is a transparent liquid containing 50% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can ...view more SiSiB® PC5425 is a transparent liquid containing 50% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can be used as a binder in zinc-rich (corrosion resistant) coating, as a starting material for sol-gel process, as a crosslinker component in cold curing silicone rubber systems, as a hardening component in dentistry for impression materials and as binder for embedding material, or as a binder in precision foundry industry view less | |
| Relca® PU-476 | Stahl Polymers | Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, go...view more Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, good adhesion properties, good chemical resistance properties, good pigment wetting properties, good scratch resistance properties, and good black heel mar resistance properties. view less | |
| ACURE™ 510-372 | Allnex | ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/ma...view more ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling, high cross-link densities, excellent solvent resistance, low applied VOCs, and good outdoor durability. Acure™ paints exhibit extremely fast dry times with long pot lives and tuneable open times. Acure 510-372™ contains 1.4 – 1.5% succinimide, a kinetic additive, which increases pot-life and open time. view less | Request Sample |
| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...view more 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). view less | |
| GMA-300 | Estron Chemical, Inc. | GMA-300 is a highly functional, glycidyl-functional acrylic polymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used either as a sole curing agent for polyesters to make polyest...view more GMA-300 is a highly functional, glycidyl-functional acrylic polymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used either as a sole curing agent for polyesters to make polyester acrylic hybrids, or as a fortifying additive resin at amounts of 15% in systems such as polyester TGIC or hybrids to boost crosslink density, film hardness and chemical resistance. The dosage of GMA-300 as a crosslinker depends on the equivalent weight of the polyester resin. view less | |
| Epokukdo YDF-175S | Kukdo Chemical Co., Ltd. | Epokukdo YDF-175S is a liquid type epoxy resin derived from Bisphenol-F and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-175S has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured ...view more Epokukdo YDF-175S is a liquid type epoxy resin derived from Bisphenol-F and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-175S has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due to its special properties, YDF-175S is generally used in coatings, moldings, adhesive, construction and civil works, and composite applications for the low VOC or non-solvent system. YDF-170 is a standard Bisphenol-F type liquid resin and YDF-175S is specially designed for non-crystalline type in cold weather. view less | |
| Hanwha EVA 1519 | Hanwha Chemical Corporation | Hanwha EVA 1519 is an Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its...view more Hanwha EVA 1519 is an Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1519 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). view less | |
| Hanwha EVA 1520 | Hanwha Chemical Corporation | Hanwha EVA 1520 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its ...view more Hanwha EVA 1520 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1520 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). view less | |
| Hanwha EVA 1528 | Hanwha Chemical Corporation | Hanwha EVA 1528 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its ...view more Hanwha EVA 1528 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1528 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). view less | |
| VINNOL® CEN 2752 | Wacker Chemie AG | VINNOL® CEN 2752 is a fine particle size, aqueous dispersion of a plasticizer-free, self-crosslinking copolymer of vinyl chloride and ethylene with reduced formaldehyde amount. It is an ideal binder for soft nonwovens and needle felts and as a coating and...view more VINNOL® CEN 2752 is a fine particle size, aqueous dispersion of a plasticizer-free, self-crosslinking copolymer of vinyl chloride and ethylene with reduced formaldehyde amount. It is an ideal binder for soft nonwovens and needle felts and as a coating and finishing agent for woven and knitted goods. VINNOL® CEN 2752 is applied in air filtration, crack-bridging, textile- and elastic flooring and wall-covering. view less | |
| Resiflow® L-65F-50 | Estron Chemical, Inc. | Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. ...view more Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F-50 also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and good anti-pop/solvent-popping characteristics. view less | |
| Resiflow® L-65F-50 BA | Estron Chemical, Inc. | Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-me...view more Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing leveling, Resiflow® L-65F-50 BA also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. view less | |
| PChem® BM65C | Pioneer Chemicals Co., Ltd. | PChem® BM65C, in the form of a powder, is a copolymer of methyl methacrylate that is a multi-usage thermoplastic acrylic resin with durability, high purity, salt spray resistance, and excellent weather-ability. It is easily soluble in numerous organic sol...view more PChem® BM65C, in the form of a powder, is a copolymer of methyl methacrylate that is a multi-usage thermoplastic acrylic resin with durability, high purity, salt spray resistance, and excellent weather-ability. It is easily soluble in numerous organic solvents such as chlorinated solvents, ketones, aromatic hydrocarbons, esters, and it has excellent compatibility with other film forming resins, such as plasticizer, cellulose, and vinyl resins. PChem® BM65C has application in tile paint, concrete sealant/hardener, color concentrates, architecture anti-corrosive coatings, road marking, and marine and container coatings. It has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 8.0 mgKOH/g, and an inherent viscosity of 0.19. view less | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...view more DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. view less | |
| Hanwha EVA 1529 | Hanwha Chemical Corporation | Hanwha EVA 1529 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for...view more Hanwha EVA 1529 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1529 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). view less |
