| Resiflow® S | Estron Chemical, Inc. | Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder...view more Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder content. Resiflow® S is suitable for solvent borne coatings including primers and coil coatings. view less | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...view more Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less | |
| Resiflow® 3N | Estron Chemical, Inc. | Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow...view more Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow® 3N is beneficial in alleviating brush and roller marks, picture framing, edge pull and sagging, as well as promoting a uniform, level surface. view less | |
| CYMEL® U-216-10LF | Allnex | CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. This product may also be added as a leveling agent...view more CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. This product may also be added as a leveling agent in cold-cure amine catalyzed epoxy resin systems. view less | Request Sample |
| DOWSIL™ RSN-0840 Resin | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing DOWSIL™ RSN-0840 Resin can give extremely high temperature protection over short periods. This produces improves moisture resistance, heat stability, and weatherability of many organic resins. It also functions as a leveling agent...view more DOWSIL™ RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing DOWSIL™ RSN-0840 Resin can give extremely high temperature protection over short periods. This produces improves moisture resistance, heat stability, and weatherability of many organic resins. It also functions as a leveling agent to improve the surface appearance of organic protective coatings. view less | |
| Resiflow® P-67 | Estron Chemical, Inc. | Resiflow® P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries. This applies to chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. This product is base...view more Resiflow® P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries. This applies to chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. This product is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow® P-67 has a broad compatibility between powder coatings, which is another key characteristic of it. view less | |
| CYMEL® 247-10 | Allnex | CYMEL 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL 247-10 resin is suitable...view more CYMEL 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL 247-10 resin is suitable for industrial baking enamels requiring good flow, high gloss and superior resistance properties. CYMEL 247-10 resin is also useful as a leveling agent in coil coating and metal decoration formulations to improve flow, wetting and gloss. view less | Request Sample |
| ACURE™ 510-372 | Allnex | ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling...view more ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling, high cross-link densities, excellent solvent resistance, low applied VOCs, and good outdoor durability. Acure™ paints exhibit extremely fast dry times with long pot lives and tuneable open times. Acure 510-372™ contains 1.4 – 1.5% succinimide, a kinetic additive, which increases pot-life and open time. view less | Request Sample |
| ACURE™ 510-302 | Allnex | ACURE™ 510-302 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-302 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling...view more ACURE™ 510-302 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-302 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling, high cross-link densities, excellent solvent resistance, low applied VOCs, and good outdoor durability. Acure™ paints exhibit extremely fast dry times with long pot lives and tuneable open times. view less | Request Sample |
| Amicure® IC-321 | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is desi...view more Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is designed to provide long working pot-life and high flexibility. In addition, clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-321 curing agent for polyisocyanate resin exhibit rapid property development and high aesthetics and are suitable for exterior application. view less | Request Sample |
| Versamid® C-30 | Gabriel Performance Products | Versamid® C-30 is a low viscosity, light colored, amine curing agent that is moisture insensitive at room temperature. It has been designed specifically for use in high solids coatings, self-leveling flooring and castings where excellent chemical resistan...view more Versamid® C-30 is a low viscosity, light colored, amine curing agent that is moisture insensitive at room temperature. It has been designed specifically for use in high solids coatings, self-leveling flooring and castings where excellent chemical resistance, good color retention and excellent flow and blush resistance are required. view less | |
| Resiflow® L-64F | Estron Chemical, Inc. | Resiflow® L-64F is a carboxyl functional, viscous acrylic flow control agent that can be used in high solids, solvent borne, UV curable, and other paint systems. Resiflow® L-64F can act as an air release agent, reduce or eliminate surface defects such as ...view more Resiflow® L-64F is a carboxyl functional, viscous acrylic flow control agent that can be used in high solids, solvent borne, UV curable, and other paint systems. Resiflow® L-64F can act as an air release agent, reduce or eliminate surface defects such as craters, pinholes and fisheyes, as well as improve flow and leveling. The recommended dosage of Resiflow® L-64F is 0.2-1.5% based on binder solids. view less | |
| Resiflow® PL-200B | Estron Chemical, Inc. | Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performa...view more Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. view less | |
| DOUBLEMER® 6MX75-E | DBC Europe GmbH | DOUBLEMER® 6MX75-E is an acrylate oligomer. It shows excellent adhesion, fast curing, low shrinkage, good aluminum powder orientation, good anti-yellowing and excellent leveling. DOUBLEMER® 6MX75-E can also be used as an adhesion promoter, to decrease coa...view more DOUBLEMER® 6MX75-E is an acrylate oligomer. It shows excellent adhesion, fast curing, low shrinkage, good aluminum powder orientation, good anti-yellowing and excellent leveling. DOUBLEMER® 6MX75-E can also be used as an adhesion promoter, to decrease coating shrinkage, and to improve matting efficiency. view less | |
| CYMEL® U-216-8 | Allnex | CYMEL® U-216-8 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and xylene. It displays excellent compatibility with most hydrophobic resins, such as epoxies, and can contribute to improved leveling and adhesion ...view more CYMEL® U-216-8 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and xylene. It displays excellent compatibility with most hydrophobic resins, such as epoxies, and can contribute to improved leveling and adhesion characteristics. This product is recommended as a crosslinking resin in primer coatings, can coatings, and metal deco finishes. view less | Request Sample |
| Resiflow® L-67 | Estron Chemical, Inc. | Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and lev...view more Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and leveling (orange peel) and can improve the flexibility of coatings. Resiflow® L-67 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems, as the product has compatibility with all coating resins. view less | |
| Resiflow® LH-240 | Estron Chemical, Inc. | Resiflow® LH-240 is a hydroxyl functional, viscous polyacrylate flow control agent. It is used in general industrial paints, gel coats, clearcoats and automotive paints. In addition to improving flow and leveling, Resiflow® LH-240 may also provide improve...view more Resiflow® LH-240 is a hydroxyl functional, viscous polyacrylate flow control agent. It is used in general industrial paints, gel coats, clearcoats and automotive paints. In addition to improving flow and leveling, Resiflow® LH-240 may also provide improved stain resistance, surface hardness and adhesion. The product has resin compatibility and is especially suitable for clear gel coat applications. view less | |
| Resiflow® P-65F | Estron Chemical, Inc. | Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier...view more Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-65F shows a marked improvement in clarity in non-pigmented hybrid and epoxy systems compared to a classical flow control agent, such as Resiflow® P-67. view less | |
| Resiflow® L-65F-50 BA | Estron Chemical, Inc. | Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-me...view more Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing leveling, Resiflow® L-65F-50 BA also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. view less | |
| Resiflow® L-65F-50 | Estron Chemical, Inc. | Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. ...view more Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F-50 also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and good anti-pop/solvent-popping characteristics. view less | |
| Resiflow® L-65F | Estron Chemical, Inc. | Resiflow® L-65F is an acrylic flow control agent that is used mainly in solvent borne automotive clearcoats such as two component urethanes, polyester-melamine or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F also affo...view more Resiflow® L-65F is an acrylic flow control agent that is used mainly in solvent borne automotive clearcoats such as two component urethanes, polyester-melamine or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. view less | |
| Resiflow® LV | Estron Chemical, Inc. | Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...view more Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less | |
| Resiflow® LF | Estron Chemical, Inc. | Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...view more Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Resiflow® P-66F | Estron Chemical, Inc. | Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier....view more Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-66F shows a marked improvement in clarity in non-pigmented polyester-TGIC systems compared to classical flow control agents. view less | |
| Ruetasolv® BP D | Rain Carbon Germany GmbH | Ruetasolv® BP D is based on propylated biphenyl. The main application advantage is the low viscosity combined with high boiling ranges, so they are not counted as VOC. In civil engineering it is well known for self leveling application, as non-phthalic p...view more Ruetasolv® BP D is based on propylated biphenyl. The main application advantage is the low viscosity combined with high boiling ranges, so they are not counted as VOC. In civil engineering it is well known for self leveling application, as non-phthalic plasticizer, and hydrophobing agent. Ruetasolv® BP D is compatible with Epoxy, Polyurethane, poly aspartic and other raw materials.Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request . view less | |
| Resiflow® LV-67 | Estron Chemical, Inc. | Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1....view more Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best processing method and the optimum concentration of the additive. view less | |
| Resiflow® L | Estron Chemical, Inc. | Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling...view more Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| CYMEL® 350 | Allnex | CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. It is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow and leveling...view more CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. It is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow and leveling characteristics and less solvent popping on cure. view less | Request Sample |
| Resiflow® PL-220 | Estron Chemical, Inc. | Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple ...view more Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® PF-67 | Estron Chemical, Inc. | Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P...view more Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PF-67 into powder coating formulations. This product is best suited for hybrid technology, but can be used in other binder systems such polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® PL-200A | Estron Chemical, Inc. | Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and E...view more Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PL-200A into pigmented powder coating formulations. view less | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| Resiflow® PV-88 | Estron Chemical, Inc. | Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Re...view more Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow ® PV-88 is well suited for a spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® P-37 | Estron Chemical, Inc. | Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other c...view more Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other components during extrusion, and this results in a uniform system. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P-37 into powder coating formulations. view less | |
| Resiflow® PV-60 | Estron Chemical, Inc. | Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such...view more Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 1-2% of Resiflow® PV-60 into powder coating formulations. view less | |
| Resiflow® PH-240 | Estron Chemical, Inc. | Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat a...view more Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat adhesion and wetting on hydrophilic substrates such as sandblasted or unpolished metal. Resiflow® PH-240 can also improve or eliminate surface defects including orange peel, pinholes and craters. view less | |
| WorléeDur H 90 | Worlée-Chemie G.m.b.H. | WorléeDur H 90 is a low viscous, solvent free epoxy curing agent based on a polyamine adduct. This product is mainly used as a curing agent in solvent free and self-levelling epoxy flooring systems. Systems cured with WorléeDur H 90 will provide good surf...view more WorléeDur H 90 is a low viscous, solvent free epoxy curing agent based on a polyamine adduct. This product is mainly used as a curing agent in solvent free and self-levelling epoxy flooring systems. Systems cured with WorléeDur H 90 will provide good surface properties and short times to achieve complete cure. It is also suitable for primers. view less | |
| CHS-Epoxy 508 | Spolchemie | CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher viscous version of CHS-Epoxy 521. The primary use of CHS-Epoxy 508 is for potting, bonding agent...view more CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher viscous version of CHS-Epoxy 521. The primary use of CHS-Epoxy 508 is for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling flooring. view less | |
| Resiflow® L-3075 | Estron Chemical, Inc. | Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellen...view more Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellent air release, improved film characteristics, and resistance to dirt-pick up. view less | |
| CHS-Epoxy 324 | Spolchemie | CHS-Epoxy 324 is a medium molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambi...view more CHS-Epoxy 324 is a medium molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient temperature. CHS-Epoxy 324 is primarily used as a bonding agent for adhesive and construction sealants. view less | |
| CHS-Epoxy 517 | Spolchemie | CHS-Epoxy 517 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin product is modified through a non-epoxy type reactive diluent. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agent...view more CHS-Epoxy 517 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin product is modified through a non-epoxy type reactive diluent. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agent. CHS-Epoxy 517 primary use is for polymer mortars, polymer concretes and flooring. view less | |
| Miraglaze™ 8909 Base E | Lawter | Miraglaze™ 8909 Base E is an overprint varnish base from rosin resins, tung oil, DCO, mineral distillates and gelling agents with the addition of wax, but not driers. It has a high gloss, is fast drying and setting with good tack stability and leveling. T...view more Miraglaze™ 8909 Base E is an overprint varnish base from rosin resins, tung oil, DCO, mineral distillates and gelling agents with the addition of wax, but not driers. It has a high gloss, is fast drying and setting with good tack stability and leveling. The product is common in overset inks and can be used as a wet-on-wet or wet-on-dry application. view less | |
| CHS-Epoxy 498 | Spolchemie | CHS-Epoxy 498 is a modified liquid epoxy resin that has a low molecular weight. This product is modified by a mono-functional reactive diluent. CHS-Epoxy 498 is the lower viscous version of CHS-Epoxy 521. This product has several different uses but is primarily used for potting, bonding agent...view more CHS-Epoxy 498 is a modified liquid epoxy resin that has a low molecular weight. This product is modified by a mono-functional reactive diluent. CHS-Epoxy 498 is the lower viscous version of CHS-Epoxy 521. This product has several different uses but is primarily used for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling floorings. view less | |
| CHS-Epoxy 512 | Spolchemie | CHS-Epoxy 512 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a non-reactive modifier. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agent...view more CHS-Epoxy 512 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a non-reactive modifier. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agent. The primary use for CHS-Epoxy 512 is for flooring, polymer mortars, polymer concrete, and certain applications for the electrical industry. view less | |
| CHS-Epoxy 531 | Spolchemie | CHS-Epoxy 531 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin product modified through a bi-functional reactive diluent. It also has the ability to cure at ambient or elevated temperature levels with the proper curing agent...view more CHS-Epoxy 531 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin product modified through a bi-functional reactive diluent. It also has the ability to cure at ambient or elevated temperature levels with the proper curing agent. CHS-Epoxy 531 is primarily used for laminating, potting, solvent free coatings, and several different uses in electrical industry. view less | |
| CHS-Epoxy 455 | Spolchemie | CHS-Epoxy 455 is a low molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient...view more CHS-Epoxy 455 is a low molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient temperature. CHS-Epoxy 455 is primarily used for modifying, saturating, condensing and preserving and in particular, electrical, electronic, building and civil engineering. view less | |
| Hauthane L-3033 | Hauthaway | Hauthane L-3033 is a formulated polyurethane topcoat which gives a soft, silky feel at low gloss levels (2-4 gloss at 60 degree geometry). It is designed primarily for use on synthetic leather-like surfaces such as PVC, urethane, and various TPO's, as well as plastic films and other smooth surfaces. L-3033 does not have defoamer or wetting agent...view more Hauthane L-3033 is a formulated polyurethane topcoat which gives a soft, silky feel at low gloss levels (2-4 gloss at 60 degree geometry). It is designed primarily for use on synthetic leather-like surfaces such as PVC, urethane, and various TPO's, as well as plastic films and other smooth surfaces. L-3033 does not have defoamer or wetting agent, allowing the formulator flexibility of selection for his specific application. May be applied by rotogravure, wire wound rod and spray. view less | |
| CYMEL® 251 | Allnex | CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on...view more CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on CYMEL® 251 resin exhibit rapid cure response with improved water resistance compared with coatings based on conventional methylated melamine resins. In addition, coatings containing CYMEL® 251 resin maintain the excellent appearance properties charasteristic of mixed ether crosslinkers. view less | Request Sample |
| Acrylic Resin GA-300 | DKSH | Acrylic resin GA-300 is a highly functional glycidyl acrylic resin that can react with carboxyl and amine-functional compounds to produce durable coatings. It can work as a curing agent for carboxyl polyester resins in hybrid system, or as a performance e...view more Acrylic resin GA-300 is a highly functional glycidyl acrylic resin that can react with carboxyl and amine-functional compounds to produce durable coatings. It can work as a curing agent for carboxyl polyester resins in hybrid system, or as a performance enhancing additive at amounts of 1–5% in polyester-TGIC or hybrid powder coatings to increase crosslinking density, film hardness and chemical resistance. Acrylic resin GA-300 can also be used in specialty applications, such as polysiloxane based heat-resistant powder coatings. It provides stronger film integrity than TGIC as a curing agent for carboxyl polyester resins. Although the amount of Acrylic resin GA-300 in formulation depends on the equivalent weight of the polyester resin, its optimum level needs to be determined by actual laboratory evaluation. This product is available in Europe. view less | Request Sample |
| K-FLEX® 148 | King Industries, Inc. | K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling...view more K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. view less | |
| K-FLEX® UD-350W | King Industries, Inc. | K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to enhance crosslink density, solids, film/resistance properties, and flow/leveling...view more K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to enhance crosslink density, solids, film/resistance properties, and flow/leveling. It appears as a straw colored liquid and offers low VOC, water solubility, hardness, chemical resistance, hydrolytic stability, QUV resistance, and exterior durability. This is a product that is not soluble in aromatic and aliphatic hydrocarbons. It can used in making, coil coatings, wood coatings, can coatings, dip coatings, appliance coatings, automotive coatings, and overprint varnishes. view less | |
| K-FLEX® A308 | King Industries, Inc. | K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed togeth...view more K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed together with higher hydroxyl number gives good adhesion and hardness with lower VOC levels. K-FLEX® A308 appears as a offers enhanced flexibility, light color, a balance of surface dry/pot life in 2K PU, no acid functionality, and abrasion resistance. It is soluble in esters, alcohols, Aromatic 100, Aromatic 150, ketones, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, plastic coatings, industrial maintenance, and aerospace. view less |
