| ANTI-TERRA®-203 | BYK | ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging te...view more ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-204 | BYK | ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixot...view more ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-205 | BYK | ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides. | |
| ANTI-TERRA®-250 | BYK | ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the ...view more ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction. view less | |
| ANTI-TERRA®-U | BYK | ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of uns...view more ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of unsaturated polyamine amides and lower molecular weight acidic polyesters. view less | |
| ANTI-TERRA®-U 100 | BYK | ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERR...view more ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERRA-U 100 is effective for wetting and dispersing colored pigments, both organic and inorganic. No adverse effect has been observed on the pot-life of two-component systems or on the dry time of oxidative cure binders. ANTI-TERRA-U 100 can also be used as a wetting and suspending additive in water soluble coatings. view less | |
| AQUACER 1013 | BYK | AQUACER 1013 is a VOC-free HDPE-based wax emulsion for improving the surface protection in aqueous coatings and printing inks as well as in aqueous care products and polishes. | |
| AQUACER 1031 | BYK | AQUACER 1031 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous care products. It offers an anti-slip effect and good foot traffic resistance. | |
| AQUACER 1039 | BYK | AQUACER 1039 is a paraffin wax emulsion for improved surface characteristics in aqueous coatings and printing inks. | |
| AQUACER 1040 | BYK | AQUACER 1040 is a primary polyethylene dispersion for formulating release agents for metal die casting. | |
| AQUACER 1061 | BYK | AQUACER 1061 is an emulsion of an ethylene-acrylic acid copolymer wax for improving the surface characteristics of paper. | |
| AQUACER 1063 | BYK | AQUACER 1063 is a polyethylene dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives for the packaging sector. | |
| AQUACER 1075 | BYK | AQUACER 1075 is an emulsion based on an HD polyethylene wax to improve the surface properties of aqueous care products and polishes, and aqueous printing inks. | |
| AQUACER 1510 | BYK | AQUACER 1510 is a polypropylene wax emulsion for aqueous glass fiber sizings to improve the mechanical properties in glass fiber- reinforced PP compounds. | |
| AQUACER® 1547 | BYK | AQUACER® 1547 is a wax emulsion for improving surface properties of water-borne can coatings. It is an anionic emulsion of an oxidized HD polyethylene wax. This product improves scratch resistance. | |
| AQUACER 2500 | BYK | AQUACER 2500 is a wax emulsion on the basis of modified PE for aqueous foil and paper coatings to improve slip and abrasion resistance. | |
| AQUACER 2650 | BYK | AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the s...view more AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less | |
| AQUACER 3500 | BYK | AQUACER 3500 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | |
| AQUACER 494 | BYK | AQUACER 494 is an aqueous paraffin wax emulsion for care products and polishes. | |
| AQUACER 497 | BYK | AQUACER 497 is a paraffin-based wax emulsion for aqueous coatings, printing inks as well as care products and polishes for improving water repellency and surface slip. | |
| AQUACER 501 | BYK | AQUACER 501 is an HDPE-based wax emulsion for aqueous systems to improve surface protection. | |
| AQUACER 506 | BYK | AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 506 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 506 is compatible with all known polymer dispersions and plasticizers. view less | |
| AQUACER® 507 | BYK | AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhan...view more AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhances hardness and slip, and reduces short wave defects (mottling, Bénard cells). view less | |
| AQUACER® 513 | BYK | AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...view more AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. view less | |
| AQUACER 519 | BYK | AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 519 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 519 is compatible with all known polymer dispersions and plasticizers. view less | |
| AQUACER® 526 | BYK | AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves ...view more AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves orientation of effect pigments (aluminum, mica, etc.), reduces short wave defects (mottling, Bénard cells), and there is no negative influence on chemical resistance. view less | |
| AQUACER 527 | BYK | AQUACER 527 is a wax emulsion based on a modified EVA copolymer wax to improve surface characteristics in aqueous coating systems and printing inks. | |
| AQUACER 528 | BYK | AQUACER 528 is an emulsion based on an ethylene-acrylic acid-copolymer wax for improving the surface properties of aqueous care products. It offers strong anti-slip effect and good foot traffic resistance. | |
| AQUACER 530 | BYK | AQUACER 530 is a wax emulsion for improved surface characteristics in aqueous printing inks, overprint varnishes, wood and furniture coatings as well as inkjet inks. | |
| AQUACER® 531 | BYK | AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...view more AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. view less | |
| AQUACER 532 | BYK | AQUACER 532 is an emulsion of a modified HD polyethylene wax for improved surface characteristics in aqueous coating systems. | |
| AQUACER® 533 | BYK | AQUACER® 533 is a wax emulsion on the basis of modified paraffin for aqueous systems to improve surface slip, anti-blocking, and water-resistance. It is typically used in architectural coatings and in the printing inks industry. | |
| AQUACER® 537 | BYK | AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking...view more AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking and slip. view less | |
| AQUACER® 539 | BYK | AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti b...view more AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti blocking, scratch resistance, rub resistance and soft feel effect. view less | |
| AQUACER 541 | BYK | AQUACER 541 is an aqueous emulsion of a montan ester wax for care products and polishes as well as for aqueous coating systems and leather coatings. | |
| AQUACER® 552 | BYK | AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems. | |
| AQUACER 561 | BYK | AQUACER 561 is a beeswax-based wax emulsion to improve surface protection in aqueous care products and coating systems. | |
| AQUACER 565 | BYK | AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the ...view more AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less | |
| AQUACER 570 | BYK | AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...view more AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. view less | |
| AQUACER 571 | BYK | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. | |
| AQUACER 581 | BYK | AQUACER 581 is a wax emulsion based on carnauba wax for aqueous paper coatings to improve surface slip, scratch-resistance, uniformity of printing ink acceptance, and ink setoff. Anti-caking additive for thermoplastics and hotmelts. | |
| AQUACER 582 | BYK | AQUACER 582 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous seed coatings. | |
| AQUACER 583 | BYK | AQUACER 583 is a wax emulsion used to improve the surface characteristics of seed coatings. | |
| AQUACER® 593 | BYK | AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and prin...view more AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and printing inks. view less | |
| AQUACER 595 | BYK | AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack...view more AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack effect. view less | |
| AQUACER 597 | BYK | AQUACER 597 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | |
| AQUACER® 840 | BYK | AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, impro...view more AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, improves orientation of effect pigments and reduces short wave defects. view less | |
| AQUAMAT® 208 | BYK | AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scrat...view more AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance and soft feel effect. view less | |
| AQUAMAT® 263 | BYK | AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...view more AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. view less | |
| AQUATIX® 8421 | BYK | AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: impr...view more AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: improves effect pigment orientation, reduces cloudiness /mottling, shows less sensivity to co-solvents in coating systems compared to PU based thickeners, is “ready to use”, provides easy handling and incorporation compared to clays or acrylic thickeners, and excellent anti-settling properties in coatings during storage and application. view less | |
| BENDA-LUTZ® 10082 | Benda-Lutz | BENDA-LUTZ® 10082 is a leafing aluminum paste. BENDA-LUTZ® 10082 has an average particle size of 10 and a metal content of 66. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired...view more BENDA-LUTZ® 10082 is a leafing aluminum paste. BENDA-LUTZ® 10082 has an average particle size of 10 and a metal content of 66. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired to be high quality. BENDA-LUTZ® 10082 is used in printing inks, aerosols, high heat resistance paints, and chrome effect paints. view less | |
| BENDA-LUTZ® 1014 | Benda-Lutz | BENDA-LUTZ® 1014 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1014 has an average particle size of 55 and a metal content of 70. The accumulation of aluminum pigment is designed to protect...view more BENDA-LUTZ® 1014 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1014 has an average particle size of 55 and a metal content of 70. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1014 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 1031 | Benda-Lutz | BENDA-LUTZ® 1031 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1031 has an average particle size of 23 and a metal content of 66. The accumulation of aluminum pigment is designed to protect...view more BENDA-LUTZ® 1031 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1031 has an average particle size of 23 and a metal content of 66. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1031 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 1041 | Benda-Lutz | BENDA-LUTZ® 1041 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1041 has an average particle size of 18 and a metal content of 66. The accumulation of aluminum pigment is designed to protect...view more BENDA-LUTZ® 1041 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1041 has an average particle size of 18 and a metal content of 66. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1041 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 1051 | Benda-Lutz | BENDA-LUTZ® 1051 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1051 has an average particle size of 16 and a metal content of 66. The accumulation of aluminum pigment is designed to protect...view more BENDA-LUTZ® 1051 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1051 has an average particle size of 16 and a metal content of 66. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1051 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 1081 | Benda-Lutz | BENDA-LUTZ® 1081 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1081 has an average particle size of 9 and a metal content of 66. The accumulation of aluminum pigment is designed to protect ...view more BENDA-LUTZ® 1081 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1081 has an average particle size of 9 and a metal content of 66. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1081 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 12062 | Benda-Lutz | BENDA-LUTZ® 12062 is a leafing aluminum paste. BENDA-LUTZ® 12062 has an average particle size of 14 and a metal content of 73. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired...view more BENDA-LUTZ® 12062 is a leafing aluminum paste. BENDA-LUTZ® 12062 has an average particle size of 14 and a metal content of 73. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired to be high quality. BENDA-LUTZ® 12062 is used in printing inks, aerosols, high heat resistance paints, and chrome effect paints. view less | |
| BENDA-LUTZ® 12082 | Benda-Lutz | BENDA-LUTZ® 12082 is a leafing aluminum paste. BENDA-LUTZ® 12082 has an average particle size of 10 and a metal content of 60. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired...view more BENDA-LUTZ® 12082 is a leafing aluminum paste. BENDA-LUTZ® 12082 has an average particle size of 10 and a metal content of 60. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired to be high quality. BENDA-LUTZ® 12082 is used in printing inks, aerosols, high heat resistance paints, and chrome effect paints. view less | |
| BENDA-LUTZ® 1214 | Benda-Lutz | BENDA-LUTZ® 1214 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1214 has an average particle size of 55 and a metal content of 73. The accumulation of aluminum pigment is designed to protect...view more BENDA-LUTZ® 1214 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1214 has an average particle size of 55 and a metal content of 73. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1214 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 1241 | Benda-Lutz | BENDA-LUTZ® 1241 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1241 has an average particle size of 23 and a metal content of 73. The accumulation of aluminum pigment is designed to protect...view more BENDA-LUTZ® 1241 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1241 has an average particle size of 23 and a metal content of 73. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1241 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 1251 | Benda-Lutz | BENDA-LUTZ® 1251 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1251 has an average particle size of 15 and a metal content of 73. The accumulation of aluminum pigment is designed to protect...view more BENDA-LUTZ® 1251 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1251 has an average particle size of 15 and a metal content of 73. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1251 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 1281 | Benda-Lutz | BENDA-LUTZ® 1281 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1281 has an average particle size of 9 and a metal content of 73. The accumulation of aluminum pigment is designed to protect ...view more BENDA-LUTZ® 1281 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1281 has an average particle size of 9 and a metal content of 73. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1281 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 20082 UV | Benda-Lutz | BENDA-LUTZ® 20082 UV is an aluminum pigment powder intended to stabilize one-component UV paints and inks to allow them to be UV-curable. BENDA-LUTZ® 20082 UV has an average particle size of 10. This product is intended to be used for UV-curable offset in...view more BENDA-LUTZ® 20082 UV is an aluminum pigment powder intended to stabilize one-component UV paints and inks to allow them to be UV-curable. BENDA-LUTZ® 20082 UV has an average particle size of 10. This product is intended to be used for UV-curable offset inks, UV-curable rotogravure and flexographic inks, and UV-curable paints and coatings. view less | |
| BENDA-LUTZ® 20092 UV | Benda-Lutz | BENDA-LUTZ® 20092 UV is an aluminum pigment powder intended to stabilize one-component UV paints and inks to allow them to be UV-curable. BENDA-LUTZ® 20092 UV has an average particle size of 5. This product is intended to be used for UV-curable offset ink...view more BENDA-LUTZ® 20092 UV is an aluminum pigment powder intended to stabilize one-component UV paints and inks to allow them to be UV-curable. BENDA-LUTZ® 20092 UV has an average particle size of 5. This product is intended to be used for UV-curable offset inks, UV-curable rotogravure and flexographic inks, and UV-curable paints and coatings. view less | |
| BENDA-LUTZ® 2014 | Benda-Lutz | BENDA-LUTZ® 2014 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2014 has an average particle size of 55. The accumulation of aluminum pigment is designed to protect the paint film against al...view more BENDA-LUTZ® 2014 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2014 has an average particle size of 55. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2014 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 2041 | Benda-Lutz | BENDA-LUTZ® 2041 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2041 has an average particle size of 23. The accumulation of aluminum pigment is designed to protect the paint film against al...view more BENDA-LUTZ® 2041 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2041 has an average particle size of 23. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2041 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 2051 | Benda-Lutz | BENDA-LUTZ® 2051 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2051 has an average particle size of 15. The accumulation of aluminum pigment is designed to protect the paint film against al...view more BENDA-LUTZ® 2051 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2051 has an average particle size of 15. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2051 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 2081 | Benda-Lutz | BENDA-LUTZ® 2081 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2081 has an average particle size of 9. The accumulation of aluminum pigment is designed to protect the paint film against alt...view more BENDA-LUTZ® 2081 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2081 has an average particle size of 9. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2081 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 2081FS | Benda-Lutz | BENDA-LUTZ® 2081FS is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2081FS has an average particle size of 8. The accumulation of aluminum pigment is designed to protect the paint film against...view more BENDA-LUTZ® 2081FS is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2081FS has an average particle size of 8. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2081FS is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 2091 | Benda-Lutz | BENDA-LUTZ® 2091 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2091 has an average particle size of 5. The accumulation of aluminum pigment is designed to protect the paint film against alt...view more BENDA-LUTZ® 2091 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2091 has an average particle size of 5. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2091 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. view less | |
| BENDA-LUTZ® 3030 | Benda-Lutz | BENDA-LUTZ® 3030 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3030 has an average particle size of 19. This product is ...view more BENDA-LUTZ® 3030 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3030 has an average particle size of 19. This product is intended for use in 2-component epoxy coating solvent-free, floor coating systems, and corrosion protection paints. view less | |
| BENDA-LUTZ® 3041 | Benda-Lutz | BENDA-LUTZ® 3041 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3041 has an average particle size of 23. This product is ...view more BENDA-LUTZ® 3041 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3041 has an average particle size of 23. This product is intended for use in 2-component epoxy coating solvent-free, floor coating systems, and corrosion protection paints. view less | |
| BENDA-LUTZ® 3051 | Benda-Lutz | BENDA-LUTZ® 3051 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3051 has an average particle size of 15. This product is ...view more BENDA-LUTZ® 3051 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3051 has an average particle size of 15. This product is intended for use in 2-component epoxy coating solvent-free, floor coating systems, and corrosion protection paints. view less | |
| BENDA-LUTZ® 3081 | Benda-Lutz | BENDA-LUTZ® 3081 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3081 has an average particle size of 9. This product is i...view more BENDA-LUTZ® 3081 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3081 has an average particle size of 9. This product is intended for use in 2-component epoxy coating solvent-free, floor coating systems, and corrosion protection paints. view less | |
| BENDA-LUTZ® 6000 | Benda-Lutz | BENDA-LUTZ® 6000 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6000 is intended for use in printing inks conta...view more BENDA-LUTZ® 6000 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6000 is intended for use in printing inks containing solvents and those diluted in water: rotogravure, flexographic and screen printing. It is also intended for use in coatings containing solvents and those diluted in water: wheel rim lacquering, reflectors, auto accessories, kitchen and furniture handles, sport and leisure equipment, exclusive household devices, and decorative stones. view less | |
| BENDA-LUTZ® 6001 | Benda-Lutz | BENDA-LUTZ® 6001 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6001 is intended for use in printing inks conta...view more BENDA-LUTZ® 6001 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6001 is intended for use in printing inks containing solvents and those diluted in water: rotogravure, flexographic and screen printing. It is also intended for use in coatings containing solvents and those diluted in water: wheel rim lacquering, reflectors, auto accessories, kitchen and furniture handles, sport and leisure equipment, exclusive household devices, and decorative stones. view less | |
| BENDA-LUTZ® 6002 | Benda-Lutz | BENDA-LUTZ® 6002 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6002 is intended for use in printing inks conta...view more BENDA-LUTZ® 6002 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6002 is intended for use in printing inks containing solvents and those diluted in water: rotogravure, flexographic and screen printing. It is also intended for use in coatings containing solvents and those diluted in water: wheel rim lacquering, reflectors, auto accessories, kitchen and furniture handles, sport and leisure equipment, exclusive household devices, and decorative stones. view less | |
| BENDA-LUTZ® 6003 | Benda-Lutz | BENDA-LUTZ® 6003 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6003 is intended for use in printing inks conta...view more BENDA-LUTZ® 6003 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6003 is intended for use in printing inks containing solvents and those diluted in water: rotogravure, flexographic and screen printing. It is also intended for use in coatings containing solvents and those diluted in water: wheel rim lacquering, reflectors, auto accessories, kitchen and furniture handles, sport and leisure equipment, exclusive household devices, and decorative stones. view less | |
| BENDA-LUTZ® 6031 | Benda-Lutz | BENDA-LUTZ® 6031 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6031 has an average particle size of 25 and a metal content of 6...view more BENDA-LUTZ® 6031 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6031 has an average particle size of 25 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6040 TB/SN | Benda-Lutz | BENDA-LUTZ® 6040 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primaril...view more BENDA-LUTZ® 6040 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6040 TB/SN has an average particle size of 20 and a metal content of 65. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6041 | Benda-Lutz | BENDA-LUTZ® 6041 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6041 has an average particle size of 19 and a metal content of 6...view more BENDA-LUTZ® 6041 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6041 has an average particle size of 19 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6042 | Benda-Lutz | BENDA-LUTZ® 6042 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6042 has an average particle size of 13 and a metal content of 6...view more BENDA-LUTZ® 6042 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6042 has an average particle size of 13 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6051 | Benda-Lutz | BENDA-LUTZ® 6051 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6051 has an average particle size of 17 and a metal content of 6...view more BENDA-LUTZ® 6051 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6051 has an average particle size of 17 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6060 TB/SN | Benda-Lutz | BENDA-LUTZ® 6060 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primaril...view more BENDA-LUTZ® 6060 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6060 TB/SN has an average particle size of 15 and a metal content of 55. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6061 | Benda-Lutz | BENDA-LUTZ® 6061 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061 has an average particle size of 13 and a metal content of 6...view more BENDA-LUTZ® 6061 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061 has an average particle size of 13 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6061C | Benda-Lutz | BENDA-LUTZ® 6061C is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061C has an average particle size of 12 and a metal content of...view more BENDA-LUTZ® 6061C is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061C has an average particle size of 12 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6242 | Benda-Lutz | BENDA-LUTZ® 6242 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6242 has an average particle size of 14.5 and a metal content of...view more BENDA-LUTZ® 6242 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6242 has an average particle size of 14.5 and a metal content of 73. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6282 | Benda-Lutz | BENDA-LUTZ® 6282 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6282 has an average particle size of 9 and a metal content of 65...view more BENDA-LUTZ® 6282 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6282 has an average particle size of 9 and a metal content of 65. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 64009 | Benda-Lutz | BENDA-LUTZ® 64009 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size dist...view more BENDA-LUTZ® 64009 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64009 has an average particle size of 80. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64012 | Benda-Lutz | BENDA-LUTZ® 64012 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size dist...view more BENDA-LUTZ® 64012 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64012 has an average particle size of 57. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64013 TB/SN | Benda-Lutz | BENDA-LUTZ® 64013 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent use...view more BENDA-LUTZ® 64013 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent used in this product. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64013 TB/SN has an average particle size of 50. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64014 | Benda-Lutz | BENDA-LUTZ® 64014 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size dist...view more BENDA-LUTZ® 64014 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64014 has an average particle size of 36. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64015 TB/SN | Benda-Lutz | BENDA-LUTZ® 64015 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent use...view more BENDA-LUTZ® 64015 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent used in this product. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64015 TB/SN has an average particle size of 39. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64024 | Benda-Lutz | BENDA-LUTZ® 64024 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size dist...view more BENDA-LUTZ® 64024 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64024 has an average particle size of 32. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64025 TB/SN | Benda-Lutz | BENDA-LUTZ® 64025 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent use...view more BENDA-LUTZ® 64025 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent used in this product. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64025 TB/SN has an average particle size of 40. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64035 TB/SN | Benda-Lutz | BENDA-LUTZ® 64035 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent use...view more BENDA-LUTZ® 64035 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent used in this product. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64035 TB/SN has an average particle size of 25. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64044 | Benda-Lutz | BENDA-LUTZ® 64044 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size dist...view more BENDA-LUTZ® 64044 is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64044 has an average particle size of 22. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64047 TB/SN | Benda-Lutz | BENDA-LUTZ® 64047 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent use...view more BENDA-LUTZ® 64047 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent used in this product. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64047 TB/SN has an average particle size of 21.5. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64054 TB/SN | Benda-Lutz | BENDA-LUTZ® 64054 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent use...view more BENDA-LUTZ® 64054 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent used in this product. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64054 TB/SN has an average particle size of 17. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less | |
| BENDA-LUTZ® 64064 TB/SN | Benda-Lutz | BENDA-LUTZ® 64064 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent use...view more BENDA-LUTZ® 64064 TB/SN is a non-leafing aluminum pigment paste that is characterized by its silver dollar particle shape and having a minimized participation rate of light scattering. The TB/SN stand for Testbenzin/Solventnaphtha which is the solvent used in this product. This product has a very flat pigment surface and a narrow particle size distribution. BENDA-LUTZ® 64064 TB/SN has an average particle size of 15. This product is designed for use in OEM (Original Equipment Manufacturers), automobile repair paints, vehicle paints, car interior paints, wheel rim paints, and HiFi paints. view less |
