| ANTI-TERRA®-203 | BYK | ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging te...view more ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-204 | BYK | ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixot...view more ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-205 | BYK | ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides. | |
| ANTI-TERRA®-250 | BYK | ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the ...view more ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction. view less | |
| ANTI-TERRA®-U | BYK | ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of uns...view more ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of unsaturated polyamine amides and lower molecular weight acidic polyesters. view less | |
| ANTI-TERRA®-U 100 | BYK | ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERR...view more ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERRA-U 100 is effective for wetting and dispersing colored pigments, both organic and inorganic. No adverse effect has been observed on the pot-life of two-component systems or on the dry time of oxidative cure binders. ANTI-TERRA-U 100 can also be used as a wetting and suspending additive in water soluble coatings. view less | |
| AQUACER 1013 | BYK | AQUACER 1013 is a VOC-free HDPE-based wax emulsion for improving the surface protection in aqueous coatings and printing inks as well as in aqueous care products and polishes. | |
| AQUACER 1031 | BYK | AQUACER 1031 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous care products. It offers an anti-slip effect and good foot traffic resistance. | |
| AQUACER 1039 | BYK | AQUACER 1039 is a paraffin wax emulsion for improved surface characteristics in aqueous coatings and printing inks. | |
| AQUACER 1040 | BYK | AQUACER 1040 is a primary polyethylene dispersion for formulating release agents for metal die casting. | |
| AQUACER 1061 | BYK | AQUACER 1061 is an emulsion of an ethylene-acrylic acid copolymer wax for improving the surface characteristics of paper. | |
| AQUACER 1063 | BYK | AQUACER 1063 is a polyethylene dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives for the packaging sector. | |
| AQUACER 1075 | BYK | AQUACER 1075 is an emulsion based on an HD polyethylene wax to improve the surface properties of aqueous care products and polishes, and aqueous printing inks. | |
| AQUACER 1510 | BYK | AQUACER 1510 is a polypropylene wax emulsion for aqueous glass fiber sizings to improve the mechanical properties in glass fiber- reinforced PP compounds. | |
| AQUACER® 1547 | BYK | AQUACER® 1547 is a wax emulsion for improving surface properties of water-borne can coatings. It is an anionic emulsion of an oxidized HD polyethylene wax. This product improves scratch resistance. | |
| AQUACER 2500 | BYK | AQUACER 2500 is a wax emulsion on the basis of modified PE for aqueous foil and paper coatings to improve slip and abrasion resistance. | |
| AQUACER 2650 | BYK | AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the s...view more AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less | |
| AQUACER 3500 | BYK | AQUACER 3500 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | |
| AQUACER 494 | BYK | AQUACER 494 is an aqueous paraffin wax emulsion for care products and polishes. | |
| AQUACER 497 | BYK | AQUACER 497 is a paraffin-based wax emulsion for aqueous coatings, printing inks as well as care products and polishes for improving water repellency and surface slip. | |
| AQUACER 501 | BYK | AQUACER 501 is an HDPE-based wax emulsion for aqueous systems to improve surface protection. | |
| AQUACER 506 | BYK | AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 506 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 506 is compatible with all known polymer dispersions and plasticizers. view less | |
| AQUACER® 507 | BYK | AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhan...view more AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhances hardness and slip, and reduces short wave defects (mottling, Bénard cells). view less | |
| AQUACER® 513 | BYK | AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...view more AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. view less | |
| AQUACER 519 | BYK | AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 519 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 519 is compatible with all known polymer dispersions and plasticizers. view less | |
| AQUACER® 526 | BYK | AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves ...view more AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves orientation of effect pigments (aluminum, mica, etc.), reduces short wave defects (mottling, Bénard cells), and there is no negative influence on chemical resistance. view less | |
| AQUACER 527 | BYK | AQUACER 527 is a wax emulsion based on a modified EVA copolymer wax to improve surface characteristics in aqueous coating systems and printing inks. | |
| AQUACER 528 | BYK | AQUACER 528 is an emulsion based on an ethylene-acrylic acid-copolymer wax for improving the surface properties of aqueous care products. It offers strong anti-slip effect and good foot traffic resistance. | |
| AQUACER 530 | BYK | AQUACER 530 is a wax emulsion for improved surface characteristics in aqueous printing inks, overprint varnishes, wood and furniture coatings as well as inkjet inks. | |
| AQUACER® 531 | BYK | AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...view more AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. view less | |
| AQUACER 532 | BYK | AQUACER 532 is an emulsion of a modified HD polyethylene wax for improved surface characteristics in aqueous coating systems. | |
| AQUACER® 533 | BYK | AQUACER® 533 is a wax emulsion on the basis of modified paraffin for aqueous systems to improve surface slip, anti-blocking, and water-resistance. It is typically used in architectural coatings and in the printing inks industry. | |
| AQUACER® 537 | BYK | AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking...view more AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking and slip. view less | |
| AQUACER® 539 | BYK | AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti b...view more AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti blocking, scratch resistance, rub resistance and soft feel effect. view less | |
| AQUACER 541 | BYK | AQUACER 541 is an aqueous emulsion of a montan ester wax for care products and polishes as well as for aqueous coating systems and leather coatings. | |
| AQUACER® 552 | BYK | AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems. | |
| AQUACER 561 | BYK | AQUACER 561 is a beeswax-based wax emulsion to improve surface protection in aqueous care products and coating systems. | |
| AQUACER 565 | BYK | AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the ...view more AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less | |
| AQUACER 570 | BYK | AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...view more AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. view less | |
| AQUACER 571 | BYK | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. | |
| AQUACER 581 | BYK | AQUACER 581 is a wax emulsion based on carnauba wax for aqueous paper coatings to improve surface slip, scratch-resistance, uniformity of printing ink acceptance, and ink setoff. Anti-caking additive for thermoplastics and hotmelts. | |
| AQUACER 582 | BYK | AQUACER 582 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous seed coatings. | |
| AQUACER 583 | BYK | AQUACER 583 is a wax emulsion used to improve the surface characteristics of seed coatings. | |
| AQUACER® 593 | BYK | AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and prin...view more AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and printing inks. view less | |
| AQUACER 595 | BYK | AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack...view more AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack effect. view less | |
| AQUACER 597 | BYK | AQUACER 597 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | |
| AQUACER® 840 | BYK | AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, impro...view more AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, improves orientation of effect pigments and reduces short wave defects. view less | |
| AQUAMAT® 208 | BYK | AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scrat...view more AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance and soft feel effect. view less | |
| AQUAMAT® 263 | BYK | AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...view more AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. view less | |
| AQUATIX® 8421 | BYK | AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: impr...view more AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: improves effect pigment orientation, reduces cloudiness /mottling, shows less sensivity to co-solvents in coating systems compared to PU based thickeners, is “ready to use”, provides easy handling and incorporation compared to clays or acrylic thickeners, and excellent anti-settling properties in coatings during storage and application. view less | |
| Atrelux UV100 | Atcoat GmbH | Atrelux UV100 is a radiation curring polyester acyrylate, modified with natural fatty acids, suitable for top coats, fillers and primers. This product has good adhesion on wood, and is also recommended for printing inks. Atrelux UV100 has a solid of 100% ...view more Atrelux UV100 is a radiation curring polyester acyrylate, modified with natural fatty acids, suitable for top coats, fillers and primers. This product has good adhesion on wood, and is also recommended for printing inks. Atrelux UV100 has a solid of 100% and a viscosity of 40 to 60 sec. view less | |
| Atrelux UV1500 | Atcoat GmbH | Atrelux UV1500 is polyester acrylic resin for the formulation of electron beam and UV curing varnishes, paints, and lacquers. It is almost a colorless resin with good reactivity that forms elastic, chemical, and scratch resistant films with good adhesion ...view more Atrelux UV1500 is polyester acrylic resin for the formulation of electron beam and UV curing varnishes, paints, and lacquers. It is almost a colorless resin with good reactivity that forms elastic, chemical, and scratch resistant films with good adhesion properties, even on plastic surface. Atrelux UV1500 has a solid of 100% and a viscosity of 40 to 60 dPas. view less | |
| Atrelux UV1600 | Atcoat GmbH | Atrelux UV1600 is polyester acrylic resin for the formulation of electron beam and UV curing varnishes, paints, and lacquers. It is almost a colorless resin with good reactivity that forms elastic, chemical, and scratch resistant films with good adhesion ...view more Atrelux UV1600 is polyester acrylic resin for the formulation of electron beam and UV curing varnishes, paints, and lacquers. It is almost a colorless resin with good reactivity that forms elastic, chemical, and scratch resistant films with good adhesion properties, even on plastic surface. Atrelux UV1600 has a solid of 100% and a viscosity of 15 to 30 dPas. view less | |
| Atrelux UV3000 | Atcoat GmbH | Atrelux UV3000 is an epoxy acrylate resin with chemical resistance, high reactivity, scratch resistant films, hard, and flexible. Atrelux UV3000 has a solid of 100% and a viscosity of 400 to 600 dPas. | |
| Atrelux UV3300 | Atcoat GmbH | Atrelux UV3300 is an epoxy acrylate resin with scratch resistant films, chemical resistant, corrosion resistant, high reactivity, hard, and flexible. Atrelux UV3300 has a solid of 100% and a viscosity of 120 to 180 dPas. | |
| Atrelux UV3800 | Atcoat GmbH | Atrelux UV3800 is a low odor, low viscous, epoxy acrylate resin for the production of UV/Electron beam curing lacquers and varnishes with good chemical resistance, pigment wetting, high hardness, durable films, high reactivity, and forms hard scratch res...view more Atrelux UV3800 is a low odor, low viscous, epoxy acrylate resin for the production of UV/Electron beam curing lacquers and varnishes with good chemical resistance, pigment wetting, high hardness, durable films, high reactivity, and forms hard scratch resistant. Atrelux UV3800 has a solid of 100% and a viscosity of 120 to 250 dPas. view less | |
| Atrelux UV6154/54 BA | Atcoat GmbH | Atrelux UV6154/54 BA is a hydroxyl group containing polyacrylic acrylate, curing with radiation (dual cure) and isocyanate, which is scratch resistant and non-adhesive for non-yellowing coatings. Atrelux UV6154/54 BA has a solid of 54% and a viscosity of ...view more Atrelux UV6154/54 BA is a hydroxyl group containing polyacrylic acrylate, curing with radiation (dual cure) and isocyanate, which is scratch resistant and non-adhesive for non-yellowing coatings. Atrelux UV6154/54 BA has a solid of 54% and a viscosity of 25 to 40 dPas. view less | |
| Atreplus LA 20 | Atcoat GmbH | Atreplus LA 20 is a low viscous binder system, consisting of high quality fatty acids, suitable for impregnation, lacquers, wood oils, low solvent penetrating, and varnishes. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, ...view more Atreplus LA 20 is a low viscous binder system, consisting of high quality fatty acids, suitable for impregnation, lacquers, wood oils, low solvent penetrating, and varnishes. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atreplus LA 20 has a solid of 100% and a viscosity of 50 to 70 sec (DIN4). view less | |
| Atrepol P140/80 BA | Atcoat GmbH | Atrepol P140/80 BA is a saturated poly ester resin, consisting of butylacetat, in combination with aliphatic polyisocyanates, flexible lacquers can be produced. Atrepol P140/80 BA has a solid of 80% and a viscosity of 10 to 30 dPas. | |
| Atrepol P165 | Atcoat GmbH | Atrepol P165 is a saturated poly ester resin that is highly recommended for potting compounds and high solid 2-K and 2-K PUR coatings. Atrepol P165 has a solid of 100% and a viscosity of 35 to 45 dPas. | |
| Atrepol P180 | Atcoat GmbH | Atrepol P180 is a saturated poly ester resin in combination with Desmodur that is highly flexible and for the production of soft-feel coatings and highly flexible 2-K adhesives for glossy foil lamination. Atrepol P180 has a solid of 100% and a viscosity o...view more Atrepol P180 is a saturated poly ester resin in combination with Desmodur that is highly flexible and for the production of soft-feel coatings and highly flexible 2-K adhesives for glossy foil lamination. Atrepol P180 has a solid of 100% and a viscosity of 185 to 235 dPas. view less | |
| Atrepol P20 | Atcoat GmbH | Atrepol P20 is a saturated poly ester color stable resin with extremely low viscosity for impregnations, printing inks, stains, lacquers, reactive, wood treatment oils, and is environmentally friendly. Atrepol P20 has a solid of 100% and a viscosity of 60...view more Atrepol P20 is a saturated poly ester color stable resin with extremely low viscosity for impregnations, printing inks, stains, lacquers, reactive, wood treatment oils, and is environmentally friendly. Atrepol P20 has a solid of 100% and a viscosity of 60 to 80 sec. view less | |
| Atrepol P30 | Atcoat GmbH | Atrepol P30 is a saturated poly ester resin for wood treatment oils, impregnation, penetration, and is environmental friendly, has extremely low viscosity, and is color stable. Atrepol P30 has a solid of 100% and a viscosity of 20 to 40 sec. | |
| Atrepol P300/75 X | Atcoat GmbH | Atrepol P300/75 X is a saturated poly ester resin that is suitable for basic pastes and grind in numerous applications, due to its broad compatibility with its good wetting properties and other resins. Atrepol P300/75 X has a solid of 75% and a viscosity ...view more Atrepol P300/75 X is a saturated poly ester resin that is suitable for basic pastes and grind in numerous applications, due to its broad compatibility with its good wetting properties and other resins. Atrepol P300/75 X has a solid of 75% and a viscosity of 20 to 30 sec. view less | |
| Atrepol P350 | Atcoat GmbH | Atrepol P350 is a solvent free, low branched aliphatic polyester resin with good compatibility and wetting properties for coatings. Atrepol P350 has a solid of 100% and a viscosity of 50 to 2000 dPas. | |
| Atrepol P40 | Atcoat GmbH | Atrepol P40 is a saturated poly ester resin for wood treatment oils, impregnation, penetration, and is environmental friendly, has extremely low viscosity, and is color stable. Atrepol P40 has a solid of 100% and a viscosity of 40 to 70 sec. | |
| Atrepox E1765/60 X | Atcoat GmbH | Atrepox E1765/60 X is an epoxy ester resin that is chemical and mechanical durable with good adhesion for coatings. Atrepox E1765/60 X has a solid of 60% and a viscosity of 10 to 15 dPas. | |
| Atrepox E1784/60 K3 | Atcoat GmbH | Atrepox E1784/60 K3 is an epoxy ester resin, consisting of whit spirit, with chemical durability, flexibility, good drying properties, and adhesion for coatings. Atrepox E1784/60 K3 has a solid of 60% and a viscosity of 14 to 22 dPas. | |
| Atrepox ED401/50 X | Atcoat GmbH | Atrepox ED401/50 X is an epoxy ester resin with chemical durability, fast drying, and excellent adhesion for coatings. Atrepox ED401/50 X has a solid of 50% and a viscosity of 250 to 400 sec. | |
| Atrepur 288/60 D4 | Atcoat GmbH | Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...view more Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 288/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 4000 to 6000 mPas. view less | |
| Atrepur 340/54 D4 | Atcoat GmbH | Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...view more Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 340/54 D4 has an oil length of 60, a solid of 54%, and a viscosity of 8000 to 12000 mPas. view less | |
| Atrepur 939/60 K6 | Atcoat GmbH | Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natura...view more Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 939/60 K6 has an oil length of 60, a solid of 60%, and a viscosity of 5.5 to 7.5 Pas. view less | |
| Atrepur HS 500/70 D4 | Atcoat GmbH | Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 500/70 D4 has an oil length of 57, a solid of 70%, and a viscosity of 9000 to 12000 mPas. view less | |
| Atrepur HS 550/70 D4 | Atcoat GmbH | Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 550/70 D4 has an oil length of 58, a solid of 70%, and a viscosity of 13000 to 17000 mPas. view less | |
| Atrepur HS 600/70 IPL | Atcoat GmbH | Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and...view more Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 600/70 IPL has an oil length of 63, a solid of 70%, and a viscosity of 5000 to 9000 mPas. view less | |
| Atrepur HS 700/70 D4 | Atcoat GmbH | Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 700/70 D4 has an oil length of 60, a solid of 70%, and a viscosity of 9000 to 13000 mPas. view less | |
| Atrepur HS 800/80 D4 | Atcoat GmbH | Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 800/80 D4 has an oil length of 60, a solid of 80%, and a viscosity of 4000 to 8000 mPas. view less | |
| Atrepur U1010 HS | Atcoat GmbH | Atrepur U1010 HS is an aliphatic 100% urethane alkyd resin, consisting of talloil, suitable for the production of VOC compliant paints with fast drying and yellowing resistant. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant...view more Atrepur U1010 HS is an aliphatic 100% urethane alkyd resin, consisting of talloil, suitable for the production of VOC compliant paints with fast drying and yellowing resistant. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U1010 HS has an oil length of 82, a solid of 100%, and a viscosity of 80 to 100 dPas. view less | |
| Atrepur U1350/60 D4 | Atcoat GmbH | Atrepur U1350/60 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for fast drying top coatings and primers with high abrasion resistance, good chemical and water resistance. Atcoat alkyd resins are based on natura...view more Atrepur U1350/60 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for fast drying top coatings and primers with high abrasion resistance, good chemical and water resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U1350/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 40 to 60 dPas. view less | |
| Atrepur U41/65 BA | Atcoat GmbH | Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resin...view more Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U41/65 BA has an oil length of 41, a solid of 65%, and a viscosity of 17 to 33 dPas. view less | |
| Atrepur U600/60 D4 | Atcoat GmbH | Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd re...view more Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 26 to 35 dPas. view less | |
| Atrepur U600/60 IP | Atcoat GmbH | Atrepur U600/60 IP is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd re...view more Atrepur U600/60 IP is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 IP has an oil length of 63, a solid of 60%, and a viscosity of 27 to 35 dPas. view less | |
| Atrepur U600/60 K3 | Atcoat GmbH | Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins ...view more Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 K3 has an oil length of 60, a solid of 60%, and a viscosity of 25 to 35 dPas. view less | |
| Atrepur U600/AL55 D6 | Atcoat GmbH | Atrepur U600/AL55 D6 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion protection systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like ...view more Atrepur U600/AL55 D6 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion protection systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/AL55 D6 has an oil length of 60, a solid of 55%, and a viscosity of 40 to 60 dPas. view less | |
| Atrepur U600/HS70 IP J | Atcoat GmbH | Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, pl...view more Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/HS70 IP J has an oil length of 60, a solid of 70%, and a viscosity of 45 to 65 dPas. view less | |
| Atrepur U600HS/75 D4 | Atcoat GmbH | Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on nat...view more Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600HS/75 D4 has an oil length of 60, a solid of 75%, and a viscosity of 45 to 65 dPas. view less | |
| Atresal C 144/70 D4 | Atcoat GmbH | Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty aci...view more Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 144/70 D4 has an oil length of 62, a solid of 70%, and a viscosity of 4200 to 5200 mPas. view less | |
| Atresal C 25/60 SN | Atcoat GmbH | Atresal C 25/60 SN is short oil alkyd resin, consisting of high quality fatty acid and whit spirit, suitable for the formulation of filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materia...view more Atresal C 25/60 SN is short oil alkyd resin, consisting of high quality fatty acid and whit spirit, suitable for the formulation of filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 25/60 SN has an oil length of 29 a solid of 60%, and a viscosity of 110 to 150 sec. view less | |
| Atresal C 32/75 BA | Atcoat GmbH | Atresal C 32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for 2K coatings, NC coatings, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquer wit...view more Atresal C 32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for 2K coatings, NC coatings, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 32/75 BA has an oil length of 32 a solid of 75%, and a viscosity of 20 to 35 s (50% DIN4). view less | |
| Atresal C 35/50 D6 | Atcoat GmbH | Atresal C 35/50 D6 is medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for fast drying primer with good polish-ability, and in combination with long oil alkyds for satin gloss paints with good spread-ability. A...view more Atresal C 35/50 D6 is medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for fast drying primer with good polish-ability, and in combination with long oil alkyds for satin gloss paints with good spread-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 35/50 D6 has an oil length of 53, a solid of 50%, and a viscosity of 12000 to 16000 mPas. view less | |
| Atresal C 35/50 IP | Atcoat GmbH | Atresal C 35/50 IP is medium oil alkyd resin, consisting of high quality fatty acid and isoparaffin, suitable for fast drying primer with good polish-ability, and in combination with long oil alkyds for satin gloss paints with good spread-ability. Atcoat ...view more Atresal C 35/50 IP is medium oil alkyd resin, consisting of high quality fatty acid and isoparaffin, suitable for fast drying primer with good polish-ability, and in combination with long oil alkyds for satin gloss paints with good spread-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 35/50 IP has an oil length of 53, a solid of 50%, and a viscosity of 5000 to 6500 mPas. view less | |
| Atresal C 37/50 D4 | Atcoat GmbH | Atresal C 37/50 D4 is medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for fast drying radiator and primer paints with good drying and good polish-ability. Atcoat alkyd resins are based on natural raw materials...view more Atresal C 37/50 D4 is medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for fast drying radiator and primer paints with good drying and good polish-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 37/50 D4 has an oil length of 53, a solid of 50%, and a viscosity of 220 to 260 s(DIN6). view less | |
| Atresal C 38/60 BA | Atcoat GmbH | Atresal C 38/60 BA is medium oil alkyd resins, consisting of high quality fatty acid and butylacetat, suitable for fast drying paints with good elasticity and in combination with amino resin for enamels. Atcoat alkyd resins are based on natural raw materi...view more Atresal C 38/60 BA is medium oil alkyd resins, consisting of high quality fatty acid and butylacetat, suitable for fast drying paints with good elasticity and in combination with amino resin for enamels. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 38/60 BA has an oil length of 46, a solid of 60%, and a viscosity of 50 to 100 sec (DIN6). view less | |
| Atresal C 44/60 KY | Atcoat GmbH | Atresal C 44/60 KY is a styrene modified alkyd resin, consisting of high quality fatty acid and white spirit, suitable for zinc-based primer, anti-rust primer, and fast drying primer with good adhesion. Atcoat alkyd resins are based on natural raw materia...view more Atresal C 44/60 KY is a styrene modified alkyd resin, consisting of high quality fatty acid and white spirit, suitable for zinc-based primer, anti-rust primer, and fast drying primer with good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 44/60 KY has an oil length of 40, a solid of 60%, and a viscosity of 75 to 100 sec (50% DIN4). view less | |
| Atresal C 45/75 BA | Atcoat GmbH | Atresal C 45/75 BA is a PVC free softening agent, consisting of butylacetat, which increases elasticity of the coating and correspondingly keeps lacquers in permanence elastic, and evades embrittling in dispersions appropriate as film forming aids. Atcoat...view more Atresal C 45/75 BA is a PVC free softening agent, consisting of butylacetat, which increases elasticity of the coating and correspondingly keeps lacquers in permanence elastic, and evades embrittling in dispersions appropriate as film forming aids. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 45/75 BA has a solid of 75% and a viscosity of 75 to 120 sec (DIN4). view less | |
| Atresal C 94/70 IP | Atcoat GmbH | Atresal C 94/70 IP is a long oil alkyd resin, consisting of high quality fatty acid and isoparaffin, suitable for premium paints with good drying characteristics, very low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids,...view more Atresal C 94/70 IP is a long oil alkyd resin, consisting of high quality fatty acid and isoparaffin, suitable for premium paints with good drying characteristics, very low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 94/70 IP has an oil length of 67, a solid of 70%, and a viscosity of 5000 to 8300 mPas. view less | |
| Atresal C100/90 IP | Atcoat GmbH | Atresal C100/90 IP is a long oil alkyd resin, consisting of high quality fatty acid and isoparaffin, suitable for paints free of aromatic compounds with high solid content. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, an...view more Atresal C100/90 IP is a long oil alkyd resin, consisting of high quality fatty acid and isoparaffin, suitable for paints free of aromatic compounds with high solid content. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C100/90 IP has an oil length of 70, a solid of 90%, and a viscosity of 120 to 135 sec (70% DIN4). view less | |
| Atresal C17/60 D6 | Atcoat GmbH | Atresal C17/60 D6 K6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. ...view more Atresal C17/60 D6 K6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C17/60 D6 K6 has an oil length of 66, a solid of 60%, and a viscosity of 80 to 120 s (50% DIN4). view less | |
| Atresal C19/60 D4 | Atcoat GmbH | Atresal C19/60 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atr...view more Atresal C19/60 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C19/60 D4 has an oil length of 66, a solid of 60%, and a viscosity of 4 to 7 Pas. view less | |
| Atresal C19/60 D6 | Atcoat GmbH | Atresal C19/60 D6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atr...view more Atresal C19/60 D6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C17/60 D6 K6 has an oil length of 66, a solid of 60%, and a viscosity of 80 to 160 s (50% DIN4). view less |
