| UVECOAT® 2200 | Allnex | UVECOAT® 2200 is an amorphous unsaturated polyester resin for use in clear and pigmented UV curable powder coatings. Formulations based on UVECOAT® 2200 exhibit excellent corrosion and outdoor weathering resistance. | Request Sample |
| Atresin 5500 | Atcoat GmbH | Atresin 5500 is powder polyester in grouping with epoxy resins for fast curing powder coatings with good mechanical properties. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 55: 45 with ...view more Atresin 5500 is powder polyester in grouping with epoxy resins for fast curing powder coatings with good mechanical properties. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 55: 45 with Epoxid. view less | |
| Atresin LT 5015 | Atcoat GmbH | Atresin LT 5015 is high-reactive polyester for fast curing powder coatings with good flow and mechanical properties. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 50: 50 with Epoxid. | |
| UVECOAT® 9146 | Allnex | UVECOAT® 9146 is an aliphatic unsaturated acrylic urethane polymer for use as a crosslinker with UVECOAT® resins in UV curable powder coatings. Use of UVECOAT® 9146 in a UV curable powder coating will enhance reactivity and improve surface hardness. | Request Sample |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...view more CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...view more CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...view more CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...view more CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| UVECOAT® 9010 | Allnex | UVECOAT® 9010 is a semi-crystalline unsaturated polyester resin for use in UV curable powder coatings. Used with amorphous resins from the UVECOAT® 2000 or 3000 range, UVECOAT® 9010 improves the smoothness and flexibility of the coating. | Request Sample |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...view more CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...view more CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...view more CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| UVECOAT® 3001 | Allnex | UVECOAT® 3001 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications such as MDF and sandable primers. Coatings based on UVECOAT® 3001 exhibit good scratch and chemical resi...view more UVECOAT® 3001 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications such as MDF and sandable primers. Coatings based on UVECOAT® 3001 exhibit good scratch and chemical resistance. view less | Request Sample |
| UVECOAT® 3003 | Allnex | UVECOAT® 3003 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications on PVC flooring. Coatings based on UVECOAT® 3003 combines excellent scratch and chemical resistance with...view more UVECOAT® 3003 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications on PVC flooring. Coatings based on UVECOAT® 3003 combines excellent scratch and chemical resistance with good flexibility. view less | Request Sample |
| UVECOAT® 3005 | Allnex | UVECOAT® 3005 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for applications on wood substrates, such as textured coatings on MDF and clear varnishes for natural hardwood. Coatings based on...view more UVECOAT® 3005 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for applications on wood substrates, such as textured coatings on MDF and clear varnishes for natural hardwood. Coatings based on UVECOAT® 3005 exhibit excellent scratch resistance. view less | Request Sample |
| UVECOAT® 2100 | Allnex | UVECOAT® 2100 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for application on metal substrates and can be used for clear as well as pigmented coatings. It provides good protection against ...view more UVECOAT® 2100 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for application on metal substrates and can be used for clear as well as pigmented coatings. It provides good protection against corrosion of pre-treated substrates. view less | Request Sample |
| CERAFLOUR® 950 | BYK | CERAFLOUR® 950 is a micronized wax for improving surface properties of solvent-free UV-curing lacquers and powder coatings. It is composed of a micronized modified HD polyethylene wax. This product is used in solvent free UV-curing furniture and parquet l...view more CERAFLOUR® 950 is a micronized wax for improving surface properties of solvent-free UV-curing lacquers and powder coatings. It is composed of a micronized modified HD polyethylene wax. This product is used in solvent free UV-curing furniture and parquet lacquer and powder coatings. view less | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| KRONOS® 2310 | Kronos International, Inc. | KRONOS® 2310 is a rutile pigment for universal use, especially in waterborne and solvent-based systems for all outdoor applications. It is ideal for applications such as coil coatings, radiation-curing finishes, powder coatings, waterborne paints, and hig...view more KRONOS® 2310 is a rutile pigment for universal use, especially in waterborne and solvent-based systems for all outdoor applications. It is ideal for applications such as coil coatings, radiation-curing finishes, powder coatings, waterborne paints, and high-quality industrial coatings. This product has very good processing properties and imparts high tinting strength and hiding power. view less | |
| Escat™ 110 | Estron Chemical, Inc. | Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy,...view more Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, and polyesters cured by GMA functional acrylics. Escat™ 110's benefits include that it is to reduce the cure temperature of a particular system, or shorten the required bake time at a given cure temperature. view less | |
| WorléeAdd 1200 | Worlée-Chemie G.m.b.H. | WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This p...view more WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This product appears as a fine white powder. view less | |
| CRYLCOAT® 1626-0 | Allnex | CRYLCOAT® 1626-0 is a carboxylated polyester resin for use in medium-cure 60/40 hybrid powder coatings. Formulations based on CRYLCOAT® 1626-0 exhibit excellent flow and can be used in economical formulations. | Request Sample |
| Escat™ 60 | Estron Chemical, Inc. | Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 6...view more Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 60 include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, polyesters cured by GMA-functional acrylics, polyester-TGIC and polyester-PT-910. Escat™ 60 reduces the cure temperature of a particular system and shortens the required bake time at a given cure temperature when compared to non-catalyzed systems. view less | |
| Luna-cat 7318 | DKSH | Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe,...view more Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe, Asia and North America. view less | Request Sample |
| TIB KAT® 220 | TIB Chemicals | TIB KAT® 220 is a liquid catalyst that is used in the production of plasticizers, saturated and unsaturated polyesters and in the curing of polyurethane based powder coatings. This product has a tin content of 18.8-20.6%. | Request Sample |
| Escat™ 50 | Estron Chemical, Inc. | Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction...view more Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems as well. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy and polyesters cured by GMA-functional acrylics. Polyester-TGIC and polyester-PT-910 reactions can also be accelerated. Escat™ 50 can reduce the cure temperature of a particular system or shorten the required bake time at a given cure temperature without sacrificing DOI or flow and leveling properties. view less | |
| Resiflow L-66F | Worlée-Chemie G.m.b.H. | Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and el...view more Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve the flexibility of coatings. view less | |
| Benzoin | Estron Chemical, Inc. | Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the ...view more Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the coating film. view less | |
| MONASTRAL® Green GBX-C (PG 7) | Heubach/Heucotech, Ltd. | MONASTRAL® Green GBX-C is a pigment green 7 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a CAS No. of 1...view more MONASTRAL® Green GBX-C is a pigment green 7 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a CAS No. of 1328-53-6, and a density of 2.1 g/cm^3. view less | Request Sample |
| MONASTRAL® Green 7Y-C (PG 36) | Heubach/Heucotech, Ltd. | MONASTRAL® Green 7Y-C is a pigment green 36 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74265, a CAS No. of 6...view more MONASTRAL® Green 7Y-C is a pigment green 36 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74265, a CAS No. of 68512-13-0, and a density of 3.0 g/cm^3. view less | Request Sample |
| MONASTRAL® Green 3Y-C (PG 36) | Heubach/Heucotech, Ltd. | MONASTRAL® Green 3Y-C (PG 36) is a pigment green 36 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74265, a CAS ...view more MONASTRAL® Green 3Y-C (PG 36) is a pigment green 36 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74265, a CAS No. of 68512-13-0, and a density of 2.7g/cm^3. view less | Request Sample |
| Epoxy Hardener G-91 | Estron Chemical, Inc. | Epoxy Hardener G-91 is an imidazole type of curing agent for epoxy-based powder coatings. Coatings cured with Epoxy Hardener G-91 show excellent chemical resistance, mechanical properties, and the capability for low temperature cure. | |
| MONASTRAL® Green LAG-C (PG 7) | Heubach/Heucotech, Ltd. | MONASTRAL® Green LAG-C (PG 7) is a pigment green 7 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a CAS N...view more MONASTRAL® Green LAG-C (PG 7) is a pigment green 7 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a CAS No. of 1328-53-6, and a density of 2.3 g/cm^3. view less | Request Sample |
| MONASTRAL® Green GN-C | Heubach/Heucotech, Ltd. | MONASTRAL® Green GN-C is a pigment green 7 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a CAS No. of 13...view more MONASTRAL® Green GN-C is a pigment green 7 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a CAS No. of 1328-53-6 / 65812-13-0, and a density of 2.3 g/cm^3. view less | Request Sample |
| MONASTRAL® Green 6Y-C (PG 36) | Heubach/Heucotech, Ltd. | MONASTRAL® Green 6Y-C (PG 36) is a pigment green 36 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74265, a CAS ...view more MONASTRAL® Green 6Y-C (PG 36) is a pigment green 36 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74265, a CAS No. of 68512-13-0, and a density of 2.9 g/cm^3. view less | Request Sample |
| KRONOS® 2090 | Kronos International, Inc. | KRONOS® 2090 is a rutile pigment ideal for applications such as wood finishes, interior powder coatings, UV-curing coatings, interior architectural and industrial coatings, as well as waterborne and solvent-based printing inks. This product is a universal...view more KRONOS® 2090 is a rutile pigment ideal for applications such as wood finishes, interior powder coatings, UV-curing coatings, interior architectural and industrial coatings, as well as waterborne and solvent-based printing inks. This product is a universal pigment combining very good optical properties and dispersing performance both in waterborne and solvent based systems with good gloss. view less | |
| CRYLCOAT® 2482-2 | Allnex | CRYLCOAT® 2482-2 is a carboxyl functional polyester resin for use with TGIC in a 93/7 ratio to manufacture powder coatings that are curing at 10 min x 200°C (object temperature). Powder coatings based on CRYLCOAT® 2482-2 provide very good flexibility, mec...view more CRYLCOAT® 2482-2 is a carboxyl functional polyester resin for use with TGIC in a 93/7 ratio to manufacture powder coatings that are curing at 10 min x 200°C (object temperature). Powder coatings based on CRYLCOAT® 2482-2 provide very good flexibility, mechanical aging and good outdoor resistance. view less | Request Sample |
| CRYLCOAT® 4442-2 | Allnex | CRYLCOAT® 4442-2 is a superdurable, low bake carboxyl functional polyester resin for use with 7% TGIC in outdoor powder coatings with full cure at 10 min x 160°C (object temperature). Coatings based on CRYLCOAT® 4442-2 provide high gloss, flow out, DOI an...view more CRYLCOAT® 4442-2 is a superdurable, low bake carboxyl functional polyester resin for use with 7% TGIC in outdoor powder coatings with full cure at 10 min x 160°C (object temperature). Coatings based on CRYLCOAT® 4442-2 provide high gloss, flow out, DOI and smoothness. view less | Request Sample |
| MONOLITE® Red 316801 | Heubach/Heucotech, Ltd. | MONOLITE® Red 316801 is a pigment red 168 Anthanthrone powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has application for automoti...view more MONOLITE® Red 316801 is a pigment red 168 Anthanthrone powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has application for automotive, decorative, powder, coil, and industrial coatings. This product has a C.I. No. 59300, a CAS No. 4378-61-4, a density of 2,1 g/cm^3, and a specific surface of 26 m^2/g. view less | Request Sample |
| MONASTRAL® Green GNX-C (PG 7 / PG 36) | Heubach/Heucotech, Ltd. | MONASTRAL® Green GNX-C (PG 7 / PG 36) is a pigment green 36 and a pigment green 7 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It h...view more MONASTRAL® Green GNX-C (PG 7 / PG 36) is a pigment green 36 and a pigment green 7 powder recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260 / 74265, a CAS No. of 1328-53-6 / 68512-13-0, and a density of 2.3 g/cm^3. view less | Request Sample |
| MONOLITE® Blue 501510 | Heubach/Heucotech, Ltd. | MONOLITE® Blue 501510 is a pigment blue 15:1 Cu-phthalocyanine blue, alpha-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings...view more MONOLITE® Blue 501510 is a pigment blue 15:1 Cu-phthalocyanine blue, alpha-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. Applications for this product include automotive, industrial, decorative, powder, and coil coatings. MONOLITE® Blue 501510 has a density of 1,6 g/cm^3, a bulk volume of 3,6 l/kg, and an oil absorption of 69 ml/100g. view less | Request Sample |
| MONOLITE® Red 325401 | Heubach/Heucotech, Ltd. | MONOLITE® Red 325401 is a pigment red 254 Diketopyrrolo-Pyrrole powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has applica...view more MONOLITE® Red 325401 is a pigment red 254 Diketopyrrolo-Pyrrole powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has application for automotive, decorative, coil, and industrial coatings. This product has a C.I. No. 56110, a CAS No. 84632-65-5, a density of 1.5 g/cm^3, and a specific surface of 23 m^2/g. view less | Request Sample |
| Epoxy Hardener G-92 | Estron Chemical, Inc. | Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings a...view more Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings are noted. view less | |
| MONOLITE® Red 317003 (PR 170) | Heubach/Heucotech, Ltd. | MONOLITE® Red 317003 (PR 170) is a pigment red 170 naphthol AS powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has applicat...view more MONOLITE® Red 317003 (PR 170) is a pigment red 170 naphthol AS powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has application for automotive, decorative, coil, and industrial coatings. This product has a C.I. No. 12475, a CAS No. 2786-76-7, a density of 1.4 g/cm^3, and a specific surface of 23 m^2/g. view less | Request Sample |
| MONOLITE® Blue 515303 | Heubach/Heucotech, Ltd. | MONOLITE® Blue 515303 is a pigment blue 15:3 Cu-phthalocyanine blue, beta-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings....view more MONOLITE® Blue 515303 is a pigment blue 15:3 Cu-phthalocyanine blue, beta-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It can be used for application in automotive, coil, powder, industrial, and decorative coatings. This product has a C.I. No. 74160, a CAS No. 147-14-8, a density of 1,6 g/cm^3, and a specific surface of 54 m^2/g. view less | Request Sample |
| MONOLITE® Green 600734 | Heubach/Heucotech, Ltd. | MONOLITE® Green 600734 is a pigment green 7 Cu-phthalocyanine green, chlorinated powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coating...view more MONOLITE® Green 600734 is a pigment green 7 Cu-phthalocyanine green, chlorinated powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a density of 2,1 g/cm^3, a CAS No. of 1328-53-6, and a specific surface of 47 m^2/g. MONOLITE® Blue 515400 can be used for application in coil, powder, decorative, industrial, and automotive coatings. view less | Request Sample |
| MONOLITE® Green 600735 | Heubach/Heucotech, Ltd. | MONOLITE® Green 600735 is a pigment green 7 Cu-phthalocyanine green, chlorinated powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coating...view more MONOLITE® Green 600735 is a pigment green 7 Cu-phthalocyanine green, chlorinated powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a density of 2,1 g/cm^3, a CAS No. of 1328-53-6, and a specific surface of 53,2 m^2/g. MONOLITE® Blue 515400 can be used for application in coil, powder, decorative, industrial, and automotive coatings. view less | Request Sample |
| MONOLITE® Blue 515400 | Heubach/Heucotech, Ltd. | MONOLITE® Blue 515400 is a pigment blue 15:4 Cu-phthalocyanine blue, beta-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings....view more MONOLITE® Blue 515400 is a pigment blue 15:4 Cu-phthalocyanine blue, beta-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74160, a density of 1,7 g/cm^3, a CAS No. of 147-14-8, and a specific surface of 40 m^2/g. MONOLITE® Blue 515400 can be used for application in coil, powder, decorative, industrial, and automotive coatings. view less | Request Sample |
| MONOLITE® Blue CSN-N | Heubach/Heucotech, Ltd. | MONOLITE® Blue CSN-N is a pigment blue 15:1 Cu-phthalocyanine blue, alpha-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings....view more MONOLITE® Blue CSN-N is a pigment blue 15:1 Cu-phthalocyanine blue, alpha-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74160, a density of 1,6 g/cm^3, a CAS No. of 147-14-8, and a specific surface of 65 m^2/g. MONOLITE® Blue 515400 can be used for application in coil, powder, decorative, industrial, and automotive coatings. view less | Request Sample |
| Epoxy Hardener G-92 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings ...view more Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings are noted. Epoxy Hardener G-92 allows the formulator the versatility of using differing cure cycles while maintaining performance properties. For example, powder coatings made with Epoxy Hardener G-92 can be “snap” cured in 2 minutes at 200 °C or low temperature cured in 20 minutes at 120 °C while maintaining both mechanical (160 reverse inch pounds impact) and chemical resistance (100+ MEK double rubs) properties. view less | |
| Epoxy Hardener G-91 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy cost...view more Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy costs and offering the powder coater flexibility in curing conditions as well as the possibility to coat heat sensitive substrates are the advantages. When medium and low gloss finishes are desired, Epoxy Hardener G-91 can be used in combination with Epomatt G-152 to formulate powder coatings with a wide range of possible gloss levels. view less | |
| Epokukdo KDF-407 | Kukdo Chemical Co., Ltd. | Epokukdo KD-407 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-448H | Kukdo Chemical Co., Ltd. | Epokukdo KD-448H is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-448J | Kukdo Chemical Co., Ltd. | Epokukdo KD-448J is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-448 | Kukdo Chemical Co., Ltd. | Epokukdo KD-448 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-438 | Kukdo Chemical Co., Ltd. | Epokukdo KD-438 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-407 | Kukdo Chemical Co., Ltd. | Epokukdo KD-407 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-426 | Kukdo Chemical Co., Ltd. | Epokukdo KD-426 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-420 | Kukdo Chemical Co., Ltd. | Epokukdo KD-420 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-410J | Kukdo Chemical Co., Ltd. | Epokukdo KD-410J is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-410 | Kukdo Chemical Co., Ltd. | Epokukdo KD-410 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-405 | Kukdo Chemical Co., Ltd. | Epokukdo KD-405 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| ETERNACOLL® OXTP | UBE Chemical Europe | A fine white powder. Thermal curing with carboxylic acid anhydrides provides good hardened materials. Mainly applied to coatings formulated in a powder form. | |
| RC 833 | CINKARNA | RC 833 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and zirconium compounds. It can be used in dispersion paints, industrial and decorative coatings, powder coa...view more RC 833 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and zirconium compounds. It can be used in dispersion paints, industrial and decorative coatings, powder coatings, plaster paints, and printing inks. view less | |
| RC 82 | CINKARNA | RC 82 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial, decorative and wallpaper coatings, pl...view more RC 82 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial, decorative and wallpaper coatings, plaster paints, and powder coatings, among other applications. view less | |
| RC 823 | CINKARNA | RC 823 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial and decorative coatings, package lacq...view more RC 823 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial and decorative coatings, package lacquers, and powder coatings, among other applications. view less | |
| Epokukdo KD-404 | Kukdo Chemical Co., Ltd. | Epokukdo KD-404 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| Epotec® TH 982 | Aditya Birla | Epotec® TH 982 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator. This product is ideal for use in both decorative and functional powder coatings. | |
| Epotec® TH 983 | Aditya Birla | Epotec® TH 983 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator and flow modifier. This product is ideal for use in both decorative and protective powder coatings. | |
| Ancamine® 2337S | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...view more Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. view less | Request Sample |
| Omyacarb 5-RC | Green Egypt Group | Omyacarb 5-RC is a fine calcium carbonate powder that is manufactured from a high purity, white limestone. This product is used in the manufacturing of products such as emulsion paints, brushing enamels, powder coatings, primers, road-marking paints, and ...view more Omyacarb 5-RC is a fine calcium carbonate powder that is manufactured from a high purity, white limestone. This product is used in the manufacturing of products such as emulsion paints, brushing enamels, powder coatings, primers, road-marking paints, and adhesives. Omyacarb 5-RC has a loose bulk density of 0.7 g/ml and an HCl insoluble content of 0.2%. view less | |
| SIRION® VP 2085 | SIR Industriale SpA | SIRION® VP 2085 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It is compatible with epoxy resins. This product is useful for optimizing the reactivity of powder coating formulations that contain a curing ...view more SIRION® VP 2085 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It is compatible with epoxy resins. This product is useful for optimizing the reactivity of powder coating formulations that contain a curing accelerator. This product is well suited for use in protective or decorative powder coatings. view less | |
| NT-552 | Changzhou Niutang Chemical Plant | NT-552 is a white powdered curing agent. It is widely used for its stabilizing, adhesive and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. | |
| KA-68 | Keeneyes International Co., Ltd. | KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings w...view more KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings with matte surface having excellent mechanical quality and wonderful reappearance. view less | |
| TR-TPO | DKSH | TR-TPO is an efficient curing agent, especially suitable for long-wavelength LED light curing of unsaturated resins. TR-TPO can be used for coatings on wood, metal, plastic, paper and optical fibers, as well as UV-curable formulations for printing inks an...view more TR-TPO is an efficient curing agent, especially suitable for long-wavelength LED light curing of unsaturated resins. TR-TPO can be used for coatings on wood, metal, plastic, paper and optical fibers, as well as UV-curable formulations for printing inks and adhesives. view less | Request Sample |
| Luna-mer 552 | DKSH | Luna-mer 552 is a curing agent for TGIC-free, exterior durable powder coatings based on carboxyl functional polyesters. Cured film performance is comparable to those of polyester/TGIC systems. Luna-mer 552 has an exceptionally clean toxicological profile ...view more Luna-mer 552 is a curing agent for TGIC-free, exterior durable powder coatings based on carboxyl functional polyesters. Cured film performance is comparable to those of polyester/TGIC systems. Luna-mer 552 has an exceptionally clean toxicological profile resulting in powder coatings that are safe to work with. This product is available in Europe, Asia and North America. view less | Request Sample |
| BECKOPOX™ E 04649 | Allnex | BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend...view more BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend powder coatings with gloss level of 20 – 35% produce outstanding smoothness at cure temperature as low as 130°C on MDF. view less | Request Sample |
| MONOLITE® Yellow 108304 | Heubach/Heucotech, Ltd. | MONOLITE® Yellow 108304 is a pigment yellow 83 diarylide powder recommended for water-borne paints, air-drying alkyds, stoving enamel, acid curing systems, amine curing epoxies, and isocyanate cured systems. It has application for automotive, decorative, ...view more MONOLITE® Yellow 108304 is a pigment yellow 83 diarylide powder recommended for water-borne paints, air-drying alkyds, stoving enamel, acid curing systems, amine curing epoxies, and isocyanate cured systems. It has application for automotive, decorative, coil, powder, and industrial coatings. This product has a C.I. No. 21108, a CAS No. 5567-15-7, a density of 1,8 g/cm^3, and a specific surface of 18,7 m^2/g. view less | Request Sample |
| CRYLCOAT® 2608-6 | Allnex | CRYLCOAT® 2608-6 is a high reactive carboxyl functional polyester resin for use with Primid® XL 552 in 95/5 mixing ratio in industrial outdoor powder coatings. Coatings made with CRYLCOAT® 2608-6 exhibit excellent cure response and broad cure window, good...view more CRYLCOAT® 2608-6 is a high reactive carboxyl functional polyester resin for use with Primid® XL 552 in 95/5 mixing ratio in industrial outdoor powder coatings. Coatings made with CRYLCOAT® 2608-6 exhibit excellent cure response and broad cure window, good flow, improved storage stability and blooming resistance. view less | Request Sample |
| MONOLITE® Yellow 108303 | Heubach/Heucotech, Ltd. | MONOLITE® Yellow 108303 is a pigment yellow 83 diarylide powder recommended for water-borne paints, air-drying alkyds, stoving enamel, acid curing systems, amine curing epoxies, and isocyanate cured systems. It has application for automotive, decorative, ...view more MONOLITE® Yellow 108303 is a pigment yellow 83 diarylide powder recommended for water-borne paints, air-drying alkyds, stoving enamel, acid curing systems, amine curing epoxies, and isocyanate cured systems. It has application for automotive, decorative, coil, powder, and industrial coatings. This product has a C.I. No. 21108, a CAS No. 5567-15-7, a density of 1,5 g/cm^3, and a specific surface of 20,6 m^2/g. view less | Request Sample |
| Acrylic Crosslinker GMA-300 | Worlée-Chemie G.m.b.H. | Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids...view more Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids, solvent-based and powder coating systems. In powder coatings using carboxylated resins, Acrylic Crosslinker GMA-300 will increase the crosslink density, the mechanical properties and the chemical resistance. view less | |
| TGIC-P | Changzhou Niutang Chemical Plant | TGIC-P is a white powder with high heat and chemical resistance. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant in...view more TGIC-P is a white powder with high heat and chemical resistance. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. view less | |
| Epotec® TH 981 | Aditya Birla | Epotec® TH 981 is a solid phenolic hardener based on epoxy resin and bisphenol-A. This product is ideal for use in both decorative and functional powder coatings. | |
| TGIC-D | Changzhou Niutang Chemical Plant | TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB s...view more TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. view less | |
| ESACURE TPO | LEHVOSS Group | ESACURE TPO is a yellow powder that is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. This product is particularly suitable for the curing of white pigmented systems thin and thick layer. It is also...view more ESACURE TPO is a yellow powder that is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. This product is particularly suitable for the curing of white pigmented systems thin and thick layer. It is also suggested for pigmented systems when high reactivity, low curing odor, and low yellowing are required. Its main applications are in the manufacturing of white pigmented coatings, clear thickness coatings, and printing inks. view less | |
| TR-1173 | DKSH | TR-1173 is a high-efficiency liquid free radical photoinitiator, which has the following characteristics: high initiation activity, good curing effect, excellent anti-yellowing performance, and good anti-yellowing effect. Used to initiate the polymerization of unsaturated resins and monomers. TR-1173 can be used for acrylate-based UV-curable clear coatings on paper, metal and plastic surfaces, and is recommended for UV-curable coatings...view more TR-1173 is a high-efficiency liquid free radical photoinitiator, which has the following characteristics: high initiation activity, good curing effect, excellent anti-yellowing performance, and good anti-yellowing effect. Used to initiate the polymerization of unsaturated resins and monomers. TR-1173 can be used for acrylate-based UV-curable clear coatings on paper, metal and plastic surfaces, and is recommended for UV-curable coatings that require long-term sun exposure and require little yellowing. view less | Request Sample |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| CRYLCOAT® 2416-2 | Allnex | CRYLCOAT® 2416-2 is a carboxyl functional polyester resin designed for curing with TGIC in the ratio of 94/6 for architectural applications. Coatings based on CRYLCOAT® 2416-2 exhibit good outdoor durability, gloss, flow out and excellent storage stabili...view more CRYLCOAT® 2416-2 is a carboxyl functional polyester resin designed for curing with TGIC in the ratio of 94/6 for architectural applications. Coatings based on CRYLCOAT® 2416-2 exhibit good outdoor durability, gloss, flow out and excellent storage stability of powder coatings formulations. view less | Request Sample |
| CRYLCOAT® E 04818 | Allnex | CRYLCOAT® E 04818 is a carboxyl functional polyester resin designed for curing with TGIC in the ratio of 93/7 for architectural applications. Coatings based on CRYLCOAT® E 04818 exhibit good outdoor durability, gloss, flow out and excellent storage stabi...view more CRYLCOAT® E 04818 is a carboxyl functional polyester resin designed for curing with TGIC in the ratio of 93/7 for architectural applications. Coatings based on CRYLCOAT® E 04818 exhibit good outdoor durability, gloss, flow out and excellent storage stability of powder coatings formulations. view less | Request Sample |
| Razeen® SR 5184 | Jubail Chemical Industries Co. | Razeen® SR 5184 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its ability to take on different properties depending on what it's combined with. Razeen® SR 5184 is designed for use in solvent-containing coatings when combined with fatty acids and powder coatings...view more Razeen® SR 5184 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its ability to take on different properties depending on what it's combined with. Razeen® SR 5184 is designed for use in solvent-containing coatings when combined with fatty acids and powder coatings when combined with certain curing agents. view less | |
| Razeen® SR 5084 | Jubail Chemical Industries Co. | Razeen® SR 5084 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its ability to take on different properties depending on what it's combined with. Razeen® SR 5084 is designed for use in solvent-containing coatings when combined with fatty acids and powder coatings...view more Razeen® SR 5084 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its ability to take on different properties depending on what it's combined with. Razeen® SR 5084 is designed for use in solvent-containing coatings when combined with fatty acids and powder coatings when combined with certain curing agents. view less | |
| MONOLITE® Yellow 113901 | Heubach/Heucotech, Ltd. | MONOLITE® Yellow 113901 is a pigment yellow 139 isoindoline powder recommended for water-borne paints, air-drying alkyds, stoving enamel, acid curing systems, amine curing epoxies, and isocyanate cured systems. It has application for automotive, decorativ...view more MONOLITE® Yellow 113901 is a pigment yellow 139 isoindoline powder recommended for water-borne paints, air-drying alkyds, stoving enamel, acid curing systems, amine curing epoxies, and isocyanate cured systems. It has application for automotive, decorative, coil, and industrial coatings. This product has a C.I. No. 56298, a CAS No. 36888-99-0, a density of 1.7 g/cm^3, and a specific surface of 19 m^2/g. view less | Request Sample |
| TGIC-G | Changzhou Niutang Chemical Plant | TGIC-G is a white granule with low UV absorption. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. | |
| ESCAT 50 | Worlée-Chemie G.m.b.H. | ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT ...view more ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT 50 is used in powder coatings to accelerate the cure of systems based on the reaction of an epoxy functional resin with a carboxyl functional curing agent. Typical systems are epoxy/polyester hybrids, epoxy/acrylic hybrids, TGIC/polyester systems and epoxy-functional acrylic/carboxyl-functional curing agent systems. It can also be used to accelerate the cure of epoxy systems that are cured by dicyanamide. view less | |
| SIRION® VP 2084 | SIR Industriale SpA | SIRION® VP 2084 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a curing accelerator, has good flow, and medium reactivity. This product is well suited for use in protective or decorative powder...view more SIRION® VP 2084 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a curing accelerator, has good flow, and medium reactivity. This product is well suited for use in protective or decorative powder coating. view less | |
| SIRION® VP 2083 | SIR Industriale SpA | SIRION® VP 2083 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a polyacrylate flow modifier and curing accelerator, has good flow, and very high reactivity. This product is well suited for use in powder...view more SIRION® VP 2083 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a polyacrylate flow modifier and curing accelerator, has good flow, and very high reactivity. This product is well suited for use in powder coating. view less | |
| Araldite® GT 6084 | Jubail Chemical Industries Co. | Araldite® GT 6084 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its ability to take on specific properties depending on with what it is combined with. Araldite® GT 6084 is designed for use in solvent-containing coatings if it is combined with fatty acids and powder coatings...view more Araldite® GT 6084 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its ability to take on specific properties depending on with what it is combined with. Araldite® GT 6084 is designed for use in solvent-containing coatings if it is combined with fatty acids and powder coatings if it is combined with specific curing agents. view less | |
| Luna-mer 2165D | DKSH | Luna-mer 2165D is a synthetic resin-based matting agent for hybrid powder coatings, which is designed for wide ranges of curing requirements, having universal applicability to any polyester resins, whether fast-curing or not. The use of this product can p...view more Luna-mer 2165D is a synthetic resin-based matting agent for hybrid powder coatings, which is designed for wide ranges of curing requirements, having universal applicability to any polyester resins, whether fast-curing or not. The use of this product can provide ranges from 8–60% (60°) of low gloss, excellent flow and outstanding anti-yellowing. This product is available in Europe, Asia and North America. view less | Request Sample |
