| MelaminebyOCI™ GPH | OCI MELAMINE | MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame reta...view more MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. view less | |
| MelaminebyOCI™ SLP | OCI MELAMINE | MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, l...view more MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. view less | |
| MelaminebyOCI™ GPH-LD | OCI MELAMINE | MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 mic...view more MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 microns and has been produced in a low-density gas-phase process. view less | |
| Melafine® | OCI MELAMINE | Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consist...view more Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consistent formation and expansion of a rigid carbon matrix that protects the substrate from further heat and damage. view less | |
| Melamine Resin 5860 | Jiangsu Sanmu Group Corporation | Melamine Resin 5860 is a N-Butylated Melamine Resin used in automotive paint. | |
| Melamine Resin 5862 | Jiangsu Sanmu Group Corporation | Melamine Resin 5862 is a N-Butylated Melamine Resin used in automotive paint. | |
| Melamine Resin 5872 | Jiangsu Sanmu Group Corporation | Melamine Resin 5872 is a N-Butylated Melamine Resin used in automotive paint. | |
| Melamine Resin 5138 | Jiangsu Sanmu Group Corporation | Melamine Resin 5138 is a N-Butylated Melamine Resin used in automotive paint. | |
| Melamine Resin 582 | Jiangsu Sanmu Group Corporation | Melamine Resin 582 is a N-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582L | Jiangsu Sanmu Group Corporation | Melamine Resin 582L is a N-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 5865 | Jiangsu Sanmu Group Corporation | Melamine Resin 5865 is an Iso-Butylated Melamine Resin used in automotive paint and coli back coatings. | |
| Melamine Resin 5136 | Jiangsu Sanmu Group Corporation | Melamine Resin 5136 is an Iso-Butylated Melamine Resin used in quick drying amino paint under low temperatures. | |
| Melamine Cyanurate (MCA) | Hainan Zhongxin Chemical Co., Ltd. | Melamine Cyanurate (MCA) is a white powder that is 99.5% pure. It is primarily used as a flame retardant additive in paints and plastic. Melamine Cyanurate is recommend for use in multiple products including: nylon-66, rubbers, synthetic resins (poly viny...view more Melamine Cyanurate (MCA) is a white powder that is 99.5% pure. It is primarily used as a flame retardant additive in paints and plastic. Melamine Cyanurate is recommend for use in multiple products including: nylon-66, rubbers, synthetic resins (poly vinyl chloride, polystyrene, polyamide, polyoxymethymens ) and acrylic acid emulsion etc. view less | |
| Melamine Resin 590-3 | Jiangsu Sanmu Group Corporation | Melamine Resin 590-3 is a N-Butylated Melamine Resin used in amino alkyd baking paint. | |
| Melamine Resin 582-2U | Jiangsu Sanmu Group Corporation | Melamine Resin 582-2U is an Iso-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582-2 | Jiangsu Sanmu Group Corporation | Melamine Resin 582-2 is an Iso-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582-2A | Jiangsu Sanmu Group Corporation | Melamine Resin 582-2A is an Iso-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582-2L | Jiangsu Sanmu Group Corporation | Melamine Resin 582-2L is an Iso-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582-3 | Jiangsu Sanmu Group Corporation | Melamine Resin 582-3 is a N-Butylated Melamine Resin used in industrial baking paint with high solid content. | |
| Melamine Resin 585-1 | Jiangsu Sanmu Group Corporation | Melamine Resin 585-1 is an Iso-Butylated Melamine Resin used in quick drying amino paint under low temperatures. | |
| PLASTI-GRIT® TYPE III: MELAMINE | Composition Materials Co., Inc. | PLASTI-GRIT® TYPE III: MELAMINE is a thermoset Melamine Formaldehyde which meets the specifications of MIL-P-85891A. It is effective for mold cleaning; stripping paints, primers and coatings from steel and hard surfaces; and removing grit & grime from eng...view more PLASTI-GRIT® TYPE III: MELAMINE is a thermoset Melamine Formaldehyde which meets the specifications of MIL-P-85891A. It is effective for mold cleaning; stripping paints, primers and coatings from steel and hard surfaces; and removing grit & grime from engines, turbines and parts. In mold cleaning, Melamine does not damage molds and is therefore an excellent replacement to glass beads and other hard abrasives. view less | |
| Melamine Modified APP-II (CF-APP202) | Shifang Changfeng Chemical Co., Ltd. | Melamine Modified APP-II (CF-APP202) is a flame retardant. This product is based on phosphorus /nitrogen synergism, free formaldehyde,manufactured from CF-APP201. Melamine Modified APP-II (CF-APP202) is most commonly used in plastics(PP, PVC, and PE), pol...view more Melamine Modified APP-II (CF-APP202) is a flame retardant. This product is based on phosphorus /nitrogen synergism, free formaldehyde,manufactured from CF-APP201. Melamine Modified APP-II (CF-APP202) is most commonly used in plastics(PP, PVC, and PE), polyester, rubber, and expandable fireproof coating applications. view less | |
| High Solids Thermosetting Polyester Melamine (Formulation #HS 5776) | ICL Phosphate Specialty | High Solids Thermosetting Polyester Melamine Baking Enamel with HALOX® 550 WF | |
| LIOPTAL A 470 | Synthopol Chemie Germany | LIOPTAL A 470 is an acrylic resin that is crosslinkable with melamine resins. It is recommended for stove-drying top coats in combination with melamine resins. | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Dromel™ 103 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromel™ 103 is a Butylated Melamine Formaldehyde Resin. | |
| BYK®-4510 | BYK | BYK®-4510 is an adhesion promoter for metal substrates. It is a solution of a copolymer with acidic groups. This product is applied in baking systems based on Acrylic/Melamine, Alkyd/Melamine and Polyester/Melamine. After neutralization (with e.g. DMEA) t...view more BYK®-4510 is an adhesion promoter for metal substrates. It is a solution of a copolymer with acidic groups. This product is applied in baking systems based on Acrylic/Melamine, Alkyd/Melamine and Polyester/Melamine. After neutralization (with e.g. DMEA) the additive can also be used in water-soluble systems. This adhesion promoter is also recommended for coil coatings applied on galvanized steel. view less | |
| CYMEL® 211 | Allnex | CYMEL® 211 Resin is a high imino, mix- alkylated melamine formaldehyde resin designed specifically for high solids system. Its most significant advantage over the other high imino melamine resins in our product line is its superior water and corrosion res...view more CYMEL® 211 Resin is a high imino, mix- alkylated melamine formaldehyde resin designed specifically for high solids system. Its most significant advantage over the other high imino melamine resins in our product line is its superior water and corrosion resistance properties. view less | Request Sample |
| BYK®-370 | BYK | BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethanes. It can also crosslink with the following binder systems: alkyd/melamine, polyester/melamine, acrylic/melamine...view more BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethanes. It can also crosslink with the following binder systems: alkyd/melamine, polyester/melamine, acrylic/melamine, self-crosslinking acrylates, and epoxies. BYK-370 increases the surface slip. view less | |
| CYMEL® 250 | Allnex | CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. ...view more CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin. view less | Request Sample |
| LIOPTAL A 424 | Synthopol Chemie Germany | LIOPTAL A 424 is a heat-reactive acrylic resin that is cross-linkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with high reactivity, stoving temperatures starting at 100°C. | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| LIOPTAL A 453 65% | Synthopol Chemie Germany | LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product a...view more LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product are 130°C and higher. view less | |
| LIOPTAL A 453 60% | Synthopol Chemie Germany | LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving c...view more LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving conditions 130°C and higher. view less | |
| Makrovil PAC 1443 | Indulor Chemie GmbH | Makrovil PAC 1443 is an emulsion polymer based on styrene and acrylates. It is a binder with excellent compatibility with melamine or melamine/urea resins, very high gloss, and excellent suitability to abrasion between intermediate coatings. Makrovil PAC ...view more Makrovil PAC 1443 is an emulsion polymer based on styrene and acrylates. It is a binder with excellent compatibility with melamine or melamine/urea resins, very high gloss, and excellent suitability to abrasion between intermediate coatings. Makrovil PAC 1443 is used in lacquers on decorative films and wood lacquers. view less | |
| SETAMINE® US-132 BB-71 | Allnex | SETAMINE® US-132 BB-71 is a solution of a non-plasticized melamine resin with very high reactivity. | Request Sample |
| PT 338 | BIP (Oldbury) Ltd | PT 338 is a methylated melamine resin. Primarily used as a resin for stiffening of all fabric types. | |
| CYMEL® 254 | Allnex | CYMEL® 254 resin is a methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for high solids system and does not require a strong acid catalyst for fast cure response. Its most significant advantage o...view more CYMEL® 254 resin is a methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for high solids system and does not require a strong acid catalyst for fast cure response. Its most significant advantage over the other high imino melamine resin in our product line is its superior stain, water and corrosion resistance properties. view less | Request Sample |
| PT 368 | BIP (Oldbury) Ltd | PT 368 is a modified methylated melamine resin. It can be used to create a cost effective stiffening agent and binder. | |
| EPOSOL 7 | Benasedo | EPOSOL 7 is suitable for can coating and drum paints when properly combined with Phenolic and/or melamine binders. | Request Sample |
| BYK®-070 | BYK | BYK®-070 is a solution of foam destroying polymers and polysiloxanes. This product was developed for medium to high polar systems and is successfully used in the following resins: thermoplastic acrylics, chlorinated rubber, polyurethane, alkyd/urea, alkyd/melamine, and acrylic/melamine...view more BYK®-070 is a solution of foam destroying polymers and polysiloxanes. This product was developed for medium to high polar systems and is successfully used in the following resins: thermoplastic acrylics, chlorinated rubber, polyurethane, alkyd/urea, alkyd/melamine, and acrylic/melamine. Suggested application fields include machinery paints, radiator paints, industrial coatings, automotive systems and wood lacquers. view less | |
| Resiflow® L-65F | Estron Chemical, Inc. | Resiflow® L-65F is an acrylic flow control agent that is used mainly in solvent borne automotive clearcoats such as two component urethanes, polyester-melamine or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F also affo...view more Resiflow® L-65F is an acrylic flow control agent that is used mainly in solvent borne automotive clearcoats such as two component urethanes, polyester-melamine or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. view less | |
| CYMEL® 651E | Allnex | CYMEL 651E resin is a partially n-butylated melamine crosslinker supplied at 60% solids in a mixture of n-butanol and xylene. | Request Sample |
| BEETLE® PT312 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise wate...view more PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT312 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| EPOSOL 9 | Benasedo | EPOSOL 9 is endowed with very good flexibility hardness and chemical resistance properties. It should be in combination with Phenolic, Melamine or Polyamide binders. | Request Sample |
| CYMEL® 251 | Allnex | CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on...view more CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on CYMEL® 251 resin exhibit rapid cure response with improved water resistance compared with coatings based on conventional methylated melamine resins. In addition, coatings containing CYMEL® 251 resin maintain the excellent appearance properties charasteristic of mixed ether crosslinkers. view less | Request Sample |
| MF-970 | Macro Polymers Pvt. Ltd. | MF-970 is a butylated melamine formaldehyde resin. This product has good flexibility and colour retention. It can be used in stoving finishes for automotive and kitchen appliances. | |
| SETAMINE® US-138 BB-70 | Allnex | SETAMINE® US-138 resin is a highly reactive, n-butylated high imino melamine crosslinker supplied in n-butanol. Like other high imino melamine resins, SETAMINE® US-138 has a high tendency to self-condense resulting in films with high film hardness that ca...view more SETAMINE® US-138 resin is a highly reactive, n-butylated high imino melamine crosslinker supplied in n-butanol. Like other high imino melamine resins, SETAMINE® US-138 has a high tendency to self-condense resulting in films with high film hardness that can be adjusted based on loading. Its hydrophobic nature improves substrate wetting, flow and leveling, and humidity and salt spray resistance making it suitable for a wide range of applications including automotive topcoats and general industrial finishes. view less | Request Sample |
| Methylated Amino Resin SM5780 | Jiangsu Sanmu Group Corporation | Methylated Amino Resin SM5780 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in can coatings. | |
| WorléeCryl 8470 | Worlée-Chemie G.m.b.H. | WorléeCryl 8470 is a 25% acrylic resin solution in water. It is DMEA-neutralized for printing inks and OPVs. This product is cross-linkable with melamine resins. | |
| Ketjenflex® 2 | Axcentive Sarl | Ketjenflex® 2 is ortho-toluenesulfonamide in the form of white to creamy crystals. It is used as a plasticizer in melamine coatings, laminating resins, and thermosetting resins. | |
| CN2610 | Sartomer Americas | CN2610 is a polyester acrylate for use in ultra violet and electron beam curing compositions. It was specially developed to offer very good adhesion to melamine surfaces. | |
| IMPRANIL® VP LS 2346 | Covestro | A polyacrylate resin crosslinkable with melamine/formaldehyde. Is particularly suitable for the direct coating of polyamide fabrics and polyester blends used in the manufacture of rainwear and sportswear. | |
| AC 108 | BIP (Oldbury) Ltd | AC 108 is a modified ammonium chloride catalyst. It is a neutral clear liquid solution with low reactivity. Primarily used as a catalyst for urea and melamine resins. | |
| BYK®-394 | BYK | BYK®-394 is a silicone-free acrylic release agent with leveling properties. It is a solution of a polyacrylate copolymer. This product is recommended for solvent-borne and solvent-free baking and 2-pack PU coatings. The additive orientates to the paint surface and crosslinks into the polymer network due to its reactivity and is therefore fixed at the paint surface. BYK-394 reacts by primary OH-groups with binders and is used in solvent-borne systems. The additive reacts with the following binders: 2-pack Polyurethane, Alkyd-Melamine, Polyester-Melamine, Acrylic-Melamine...view more BYK®-394 is a silicone-free acrylic release agent with leveling properties. It is a solution of a polyacrylate copolymer. This product is recommended for solvent-borne and solvent-free baking and 2-pack PU coatings. The additive orientates to the paint surface and crosslinks into the polymer network due to its reactivity and is therefore fixed at the paint surface. BYK-394 reacts by primary OH-groups with binders and is used in solvent-borne systems. The additive reacts with the following binders: 2-pack Polyurethane, Alkyd-Melamine, Polyester-Melamine, Acrylic-Melamine, AcrylicEpoxy combinations. This additive improves leveling and gloss. It produces a long wave effect and prevents cratering without influence on surface tension (silicone-free). BYK-394 is thermally stable. view less | |
| Methylated Amino Resin SM5717 | Jiangsu Sanmu Group Corporation | Methylated Amino Resin SM5717 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| Methylated Amino Resin SM5717W | Jiangsu Sanmu Group Corporation | Methylated Amino Resin SM5717W is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and automotive paints. | |
| Methylated Amino Resin SM5747 | Jiangsu Sanmu Group Corporation | Methylated Amino Resin SM5747 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| Methylated Amino Resin SM5847 | Jiangsu Sanmu Group Corporation | Methylated Amino Resin SM5847 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| Methylated Amino Resin SM5847L | Jiangsu Sanmu Group Corporation | Methylated Amino Resin SM5847L is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| Methylated Amino Resin SM5817 | Jiangsu Sanmu Group Corporation | Methylated Amino Resin SM5817 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| BEETLE® PT789 - Wet Strength Resin | BIP (Oldbury) Ltd | PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack...view more PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack-krafts, when such products are made at pH levels below neutral. Since PT789 is a melamine resin, it is particularly suited to the production of higher quality, more demanding paper products such as hot-filters, laundry-tag, currency, security and bottle label papers. view less | |
| Resiflow® L-65F-50 | Estron Chemical, Inc. | Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. ...view more Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F-50 also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and good anti-pop/solvent-popping characteristics. view less | |
| Resiflow® L-65F-50 BA | Estron Chemical, Inc. | Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-me...view more Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing leveling, Resiflow® L-65F-50 BA also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. view less | |
| RESYDROL® AX 250w/75EP | Allnex | Resydrol® AX 250W/75EP is a water dilutable, fatty acid modified epoxy resin ester. It has excellent pigment wetting, high corrosion protection, and very good reactivity with melamine resins. | Request Sample |
| Disvamine-702 | D.S.V. Chemicals Pvt. Ltd. | Disvamine-702 is a butylated amino resin. This product is a melamine formaldehyde resin. It is soluble in butanol. Disvamine-702 can be used in stoving enamels and roller coatings. | |
| MF-268 | Macro Polymers Pvt. Ltd. | MF-268 is a butylated melamine formaldehyde resin. This product has excellent reactivity and color retention. It can be used in stoving finishes for automotive and kitchen appliances, and strip and roller coating enamels. | |
| 4731-X-80 High Solids Polyester Resin | Gabriel Performance Products | 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels. | |
| PT 336 | BIP (Oldbury) Ltd | PT 336 Methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening and binding of all fibre types. This product exhibits medium to high reactivity. | |
| SCHWEGO® Mar 8304 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8304 is a slip- and leveling additive for solvent borne systems. The addition of SCHWEGO® mar 8304 to solvent borne coating systems improves resistance against scratch, mar and blocking. The tendency of foaming and dirt retention is reduced and gloss is preserved. This product improves as a secondary effect wetting and levelling. It is suitable for solvent borne systems as: air drying alkyds, alkyd/melamine combinations, polyurethanes, nitrocellulose, acid curing melamine...view more SCHWEGO® Mar 8304 is a slip- and leveling additive for solvent borne systems. The addition of SCHWEGO® mar 8304 to solvent borne coating systems improves resistance against scratch, mar and blocking. The tendency of foaming and dirt retention is reduced and gloss is preserved. This product improves as a secondary effect wetting and levelling. It is suitable for solvent borne systems as: air drying alkyds, alkyd/melamine combinations, polyurethanes, nitrocellulose, acid curing melamine and urea systems and oil-free polyesters view less | |
| VIACRYL® SC 6807w/43WA | Allnex | Viacryl® SC 6807W/43WA is an aqueous hydroxy functional copolymer emulsion. It can be cross-linked with reactive melamine resins to give industrial coating systems with good gloss and excellent leveling. | Request Sample |
| CN890 | Sartomer Americas | CN890 is a clear liquid multifunctional melamine acrylate for use in ultra violet and electron beam curing compositions. It offers the following key properties: excellent adhesion to plastics, scratch resistance, non yellowing, and durability. | |
| CYMEL® 373 | Allnex | CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations. | Request Sample |
| PT 312 | BIP (Oldbury) Ltd | PT 312 is a methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening of all fibre types. It has a low free formaldehyde version PT 338. | |
| Polurene TPI 27 AE | S.A.P.I.C.I. SpA | Polurene TPI 27 AE is a polyisocyanate. This product is designed to create products that adhere well on melamine paper. It can be used in coatings. Polurene TPI 27 AE contains TPTI isocyanates. | |
| Nebores® HPE 34-70 X | NECARBO B.V. | Nebores® HPE 34-70 X is a hydroxy functional polyester resin that is non-yellowing and cures with benzoguanamine and melamine resins. This product finds application in industrial stoving enamels and coil coatings. | |
| TA-816 | PCI Group, Inc. | TA-816 is a reactive siloxane polymer blend which can produce a rough or textured appearance to paints and coatings. It can be used with lacquers, alkyd, epoxy, melamine phenolic, polyester and urethane systems. | |
| MF-910 | Macro Polymers Pvt. Ltd. | MF-910 is a butylated melamine formaldehyde resin. This product has medium reactivity and good color retention on stoving. It can be used in stoving finishes for automotive and kitchen appliance applications, and in strip and roller coating enamels. | |
| RESYDROL® AN 6481w/70BBP | Allnex | Resydrol® AN 6481W/70BBP is an oil free polyester, emulsifiable in water. It is used as a co-binder in combination with melamine resins and/or polyurethane dispersions for formulation of water dilutable industrial paints. | Request Sample |
| RESYDROL® AN 6483/30WA | Allnex | RESYDROL® AN 6483/30WA is an oil free polyester, emulsifiable in water. It is used as a co-binder in combination with melamine resins and/or polyurethane dispersions for formulation of water dilutable industrial paints. | Request Sample |
| LIOPTAL B 49 | Synthopol Chemie Germany | LIOPTAL B 49 is a fast-drying medium-oil alkyd resin. It can be used in machine and automotive coatings, radiator paints, industrial coatings and primers, effect coatings, and with melamine resins for 80°C. | |
| BAYHYDROL® A XP 2469 | Covestro | An aqueous hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. Formulation of 1K-coatings by using melamine resins is also poss...view more An aqueous hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. Formulation of 1K-coatings by using melamine resins is also possible. view less | |
| SCHWEGO® Mar 8305 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8305 is a slip- and leveling additive for water-based systems. The addition of this product to water-based coating systems improves resistance against scratch, mar and blocking. The tendency of foaming and dirt retention is reduced and gloss is preserved. SCHWEGO® mar 8305 improves as a secondary effect wetting and levelling. This product is suitable for water-based systems such as: air drying alkyd resins, alkyd/melamine combinations, self and foreign crosslinking polyacrylic resins, polyurethanes, nitrocellulose systems acid curing melamine...view more SCHWEGO® Mar 8305 is a slip- and leveling additive for water-based systems. The addition of this product to water-based coating systems improves resistance against scratch, mar and blocking. The tendency of foaming and dirt retention is reduced and gloss is preserved. SCHWEGO® mar 8305 improves as a secondary effect wetting and levelling. This product is suitable for water-based systems such as: air drying alkyd resins, alkyd/melamine combinations, self and foreign crosslinking polyacrylic resins, polyurethanes, nitrocellulose systems acid curing melamine and urea systems and oil-free polyesters. view less | |
| DISPERBYK®-2055 | BYK | DISPERBYK®-2055 is a high molecular-weight wetting and dispersing additive with a solids content of 100%. This liquid additive has a good processing viscosity and can be used in systems of varying polarity, from low-polarity solvent-borne systems, including air-drying alkyds, alkyd/melamine resins, nitrocellulose, 2-pack polyurethanes, acrylic/melamine...view more DISPERBYK®-2055 is a high molecular-weight wetting and dispersing additive with a solids content of 100%. This liquid additive has a good processing viscosity and can be used in systems of varying polarity, from low-polarity solvent-borne systems, including air-drying alkyds, alkyd/melamine resins, nitrocellulose, 2-pack polyurethanes, acrylic/melamine resins, and UV-curable coatings, through to aqueous systems. In solvent-borne systems it can be used with or without grinding resin, whereas in aqueous formulations the best results are achieved with binder-free grinds. view less | |
| VIACRYL® SSC 6280w/45WA | Allnex | VIACRYL® SSC 6280w/45WA is a water dilutable acrylic resin, crosslinkable with melamine resins. Coatings based on it can be sprayed, dipped or electrodeposited. Spraying application normally needs higher viscosities compared with solvent containing system...view more VIACRYL® SSC 6280w/45WA is a water dilutable acrylic resin, crosslinkable with melamine resins. Coatings based on it can be sprayed, dipped or electrodeposited. Spraying application normally needs higher viscosities compared with solvent containing systems. view less | Request Sample |
| SYNTHALAT A 756 | Synthopol Chemie Germany | SYNTHALAT A 756 is a heat-reactive acrylic resin cross-linkable with melamine resin, after neutralization dilutable with water. It is suitable for use in anaphoretic electro-dip coatings as well as for conventional stoving area. | |
| DAOTAN® VTW 2229/40WANMP | Allnex | Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers...view more Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers. view less | Request Sample |
| VIACRYL® VSC 6276w/44WA | Allnex | VIACRYL® VSC 6276W/44WA is an aqueous hydroxy functional copolymer emulsion that can be crosslinked with reactive melamine resin such as CYMEL® 325 or CYMEL® 327 to give less-yellowing industrial coating systems with good gloss. | Request Sample |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| DAOTAN® VTW 1686/40WA | Allnex | Daotan® VTW 1686/40WA is a polyester-modified acrylic dispersion containing epoxy groups used as sole binder or in combination with melamine resins and/or polyurethane dispersions for the production of waterdilutable industrial paints, e.g. base coats. | Request Sample |
| RESYDROL® AZ 6627w/36WA | Allnex | RESYDROL® AZ 6627w/36WA is a waterborne, urethane modified alkyd resin used in combination with watersoluble melamine resins (perferably hexamethoxy-methylmelamine grades) is recommended for low bake (e. g. 20 min / 130 °C) waterborne stoving enamels prov...view more RESYDROL® AZ 6627w/36WA is a waterborne, urethane modified alkyd resin used in combination with watersoluble melamine resins (perferably hexamethoxy-methylmelamine grades) is recommended for low bake (e. g. 20 min / 130 °C) waterborne stoving enamels providing properties. view less | Request Sample |
| SiSiB® PC2520 | SiSiB SILICONES | SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyuretha...view more SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins for foundry resins and abrasives; as an additive for sealants and adhesives; or as an additive and/or primer for paints and varnishes to improve adhesion to the substrate. view less | |
| CYMEL® 350 | Allnex | CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion system...view more CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. It is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow and leveling characteristics and less solvent popping on cure. view less | Request Sample |
| Novalkyd S1507-75X | Novaresine S.r.l | Novalkyd S1507-75X is a polyester resin that is suitable for nitrocellulose systems, cured with melamine resins, and showing suitability for non-yellowing polyurethanes. The resin displays optimum behavior in the formulation of high-quality finishes for m...view more Novalkyd S1507-75X is a polyester resin that is suitable for nitrocellulose systems, cured with melamine resins, and showing suitability for non-yellowing polyurethanes. The resin displays optimum behavior in the formulation of high-quality finishes for metals and wood. view less | |
| CYCAT® VXK 6395 | Allnex | CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive syste...view more CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive systems. view less | Request Sample |
| Novasynt S2789-85 | Novaresine S.r.l | Novasynt S2789-85 is a high solids, saturated polyester resin that shows excellent flexibility, adhesion to metals and plastics, gloss retention, and corrosion resistance. This product is designed for use in metal coating, plastic coating, and melamine ba...view more Novasynt S2789-85 is a high solids, saturated polyester resin that shows excellent flexibility, adhesion to metals and plastics, gloss retention, and corrosion resistance. This product is designed for use in metal coating, plastic coating, and melamine baking enamel applications. view less | |
| SETAMINE® US-146 BB-72 | Allnex | SETAMINE® US-146 resin is an n-butylated high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature improves substrate wetting, flow and leveling, and humidity and salt spray resistance making it suitable for a wide range of application...view more SETAMINE® US-146 resin is an n-butylated high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature improves substrate wetting, flow and leveling, and humidity and salt spray resistance making it suitable for a wide range of applications including automotive topcoats and general industrial finishes. view less | Request Sample |
| Synthalat A-BWH 2172 | Synthopol Chemie Germany | Synthalat A-BWH 2172 is an aqueous binder for the production of baking primers and enamels. It can be crosslinked with melamine resins as well as with blocked polyisocyanates – also without these crosslinkers, excellent corrosion resistance and adhesion o...view more Synthalat A-BWH 2172 is an aqueous binder for the production of baking primers and enamels. It can be crosslinked with melamine resins as well as with blocked polyisocyanates – also without these crosslinkers, excellent corrosion resistance and adhesion on steel can be achieved. view less | |
| LIOCRYL AM 483 | Synthopol Chemie Germany | LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or...view more LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. view less | |
| SYNTHOESTER CC 42 | Synthopol Chemie Germany | SYNTHOESTER CC 42 is an oil-free, saturated polyester resin. It is supplied as 50% in DBE/solvesso 150 ND/butyl glycol (25:50:5). Combined with suitable melamine and benzoguanamine resins, it is used in the can and coil coating sector. |
