4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...view more 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. view less | Request Sample |
ADDID® 900 | Evonik Operations GmbH, BL Coating Additives | ADDID® 900 is a diamino-functional trimethoxy silane adhesion promoter. It promotes adhesion on surfaces of siliceous, oxidic, metallic and ceramic nature. With this product excellent adhesion can be obtained on substrates like aluminum, glass, steel, pla...view more ADDID® 900 is a diamino-functional trimethoxy silane adhesion promoter. It promotes adhesion on surfaces of siliceous, oxidic, metallic and ceramic nature. With this product excellent adhesion can be obtained on substrates like aluminum, glass, steel, plastics and paper. Due to ADDID® 900's improved adhesion on pigment and fillers, improvements in pigment wetting, particle aggregation, and a reduction of sedimentation can be obtained. This results in improvements in the optical (e.g. gloss) and mechanical properties (e.g. resistance under wet conditions). view less | Request Sample |
ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
ADDITOL® VXL 4950 | Allnex | ADDITOL® VXL 4950 is an adhesion promoting primer for plastics. | Request Sample |
ADDITOL® XL 180 | Allnex | Additol® XL 180 enhances intercoat adhesion of stoving paints and fast drying air-drying paints on electrodeposition primers, white electrodeposition paints and primers. | Request Sample |
ADDITOL® XL 186 | Allnex | Additol® XL 186 is a specific, high efficiency additive which improves the intercoat adhesion of top coats or surfacers to primers. | Request Sample |
AERODISP® W 7520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabi...view more AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. view less | Request Sample |
AERODISP® W 7520 N | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adh...view more AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. view less | Request Sample |
AERODISP® W 7520 NF | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications. | Request Sample |
AERODISP® W 7520 P | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 P is a low viscosity, water-based dispersionof AEROSIL® fumed silica, with a slightly alkaline pH. | Request Sample |
AEROSIL® E 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 805 is a fumed silica after being treated with organosilane. It provides extraordinary rheological properties by keeping brilliant transparency. In addition, it is very easy to disperse. | Request Sample |
AEROSIL® E 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 812 is a fumed silica post-treated with organosilane (HMDS) and a high specific surface area combined with exceptional hydrophobicity. In addition, it is very easy to disperse. | Request Sample |
AEROSIL® E 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 9200 is a structure-modified, hydrophobic fumed silica. Enables high loading levels at low viscosities. In addition, it is very easy to disperse. | Request Sample |
AEROSIL® E 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 972 is a fumed silica after being treated with DDS (dimethyldichlorosilane). It is a very efficient Rheology Modifier suitable for a broad range of applications while being very easy to disperse. | Request Sample |
AEROSIL® R 7200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 7200 is a structure modified fumed silica after treated with methacrylsilane. | Request Sample |
Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...view more Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. view less | |
BYK®-4509 | BYK | BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups. | |
BYK®-4512 | BYK | BYK®-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. It is particularly well-suited for use in chromate-free primers and on metal substrates that are pre-treated in a chromate-free manner. | |
CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...view more CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. view less | |
CN704 | Sartomer Americas | CN704 is a clear to hazy acrylated polyester adhesion promoter for use in UV and EB curing compositions. It has good adhesion to plastics, like polyethylene and polypropylene, and flexibility make it particularly suitable for coatings and inks for plastic...view more CN704 is a clear to hazy acrylated polyester adhesion promoter for use in UV and EB curing compositions. It has good adhesion to plastics, like polyethylene and polypropylene, and flexibility make it particularly suitable for coatings and inks for plastic substrates. view less | |
Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...view more Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. view less | |
Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...view more Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. view less | |
Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...view more Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. view less | |
Eastman Advantis™ 510W | Eastman Chemical B.V. | Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blen...view more Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blend-in resin in waterborne primers and waterborne basecoats for automotive bumper applications. Eastman Advantis™ 510W can also be used as a wash primer and is suitable as an adhesion promoter for applications beyond automotive. Eastman Advantis™ 510W provides excellent adhesion on non-flame treated EPDM rubber modified polypropylene substrates. view less | |
EBECRYL® 168 | Allnex | EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube...view more EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, solder resist formulations. view less | Request Sample |
EBECRYL® 170 | Allnex | EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, co...view more EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, and solder resist formulations. view less | Request Sample |
EBECRYL® 171 | Allnex | EBECRYL® 171 is a methacrylate modified acidic adhesion promoting agent designed as a modifier for ultraviolet (UV) and electron beam (EB) curable coatings. It is characterized by low viscosity, acid functionality, and adhesion on various substrates. | Request Sample |
EBECRYL® 411 | Allnex | EBECRYL® 411 is a modified polyester resin for flexographic narrow web and rotary screen applications. It was developed for low viscosity inks and coatings with excellent adhesion to unprimed OPP films. EBECRYL® 411 is diluted with dipropyleneglycol diacr...view more EBECRYL® 411 is a modified polyester resin for flexographic narrow web and rotary screen applications. It was developed for low viscosity inks and coatings with excellent adhesion to unprimed OPP films. EBECRYL® 411 is diluted with dipropyleneglycol diacrylate (DPGDA)(1) monomer. view less | Request Sample |
EBECRYL® 416 | Allnex | EBECRYL® 416 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with trimethylolpropane triacrylate (TMPTA) (1) monomer. Films of EBECRYL® 416 cured by ultraviolet light (UV) or electron beam (EB) display good adhesion to...view more EBECRYL® 416 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with trimethylolpropane triacrylate (TMPTA) (1) monomer. Films of EBECRYL® 416 cured by ultraviolet light (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. view less | Request Sample |
EBECRYL® 417 | Allnex | EBECRYL® 417 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with EBECRYL® 50, a tetra functional diluting acrylate. Films of EBECRYL® 417 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals...view more EBECRYL® 417 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with EBECRYL® 50, a tetra functional diluting acrylate. Films of EBECRYL® 417 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. view less | Request Sample |
EBECRYL® 418 | Allnex | EBECRYL® 418 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted in OTA 480. Films of EBECRYL® 418 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. | Request Sample |
EBECRYL® 8602 | Allnex | EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion...view more EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion resistance. In addition, EBECRYL® 8602 does not contain intentionally added organic tin compounds, heavy metals* or quinones. view less | Request Sample |
GENORAD* 40 | Rahn AG | GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varn...view more GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varnishes, adhesives and overprint varnishes. It improves adhesion on metal. view less | Request Sample |
GENORAD* 41 | Rahn AG | GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations fro...view more GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations from 1% to 5%. view less | Request Sample |
Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...view more Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...view more Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...view more SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. view less | |
SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...view more SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. view less | |
Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...view more Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. view less | |
Silane Coupling Agent FD-6150 | Zhejiang Feidian Chemical Co., Ltd. | FD-6150 is a modified amino-alkyl multiple functional oligomeric silane. It functions efficiently as an adhesion promoter. Characteristics of FD-6150 include improved adhesion with the unprimed substrate, faster curing speed, reduce yellowing, better hydr...view more FD-6150 is a modified amino-alkyl multiple functional oligomeric silane. It functions efficiently as an adhesion promoter. Characteristics of FD-6150 include improved adhesion with the unprimed substrate, faster curing speed, reduce yellowing, better hydrophobic properties, greater flexibility, and low VOC. view less | |
Silane Coupling Agent KH-7180 | Zhejiang Feidian Chemical Co., Ltd. | KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This ...view more KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This product is recommended for automotive laminate adhesives, furniture laminate adhesives, and flocking adhesives. view less | |
Soluryl 160 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 160 is a high molecular weight for high performance water-based products and is compatible with most common emulsions. It is a high performance grade, provides excellent pigment dispersion, excellent ink transfer and printability, and good film fo...view more Soluryl 160 is a high molecular weight for high performance water-based products and is compatible with most common emulsions. It is a high performance grade, provides excellent pigment dispersion, excellent ink transfer and printability, and good film forming ability and adhesion. view less | |
Soluryl 802 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 802 is a resin solution for high performance water-based products. It provides excellent pigment dispersion, ink transfer and printability, good film forming property and adhesion, and has good compatibility with Soluryl emulsions. | |
Soluryl RH-615 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RH-615 is a Styrene-Acryl Emulsion for Heat Seal application that is compatible with a wide range of other acrylics. It is clear and transparent, has good adhesion, good heat seal properties, and good viscosity stability as pH. | |
Soluryl RX-10T | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-10T is a modified acrylic copolymer emulsion for water-based products that is compatible with a wide range of other acrylics. It has good adhesion, good film forming and wetting properties, and good waster resistance. | |
Soluryl RX-20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let dow...view more Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. view less | |
Soluryl RX-30 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as...view more Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. view less | |
Soluryl SE-1301 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl SE-1301 is a modified acryl-styrene copolymer for water-based products. It is recommended for use as overprint varnishes for good adhesion property, overprint varnishes for film and paper, and as a let down vehicle for film as like PET, OPP and PE...view more Soluryl SE-1301 is a modified acryl-styrene copolymer for water-based products. It is recommended for use as overprint varnishes for good adhesion property, overprint varnishes for film and paper, and as a let down vehicle for film as like PET, OPP and PE. view less | |
Soluryl SX-1420 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl SX-1420 is a crosslinked styrene-acryl emulsion for water-based products. It is recommended for improving agent for good adhesion, coating and Let down vehicle for good adhesion, and as a coating and Let down vehicle for film and metal. | |
SR9050 | Sartomer Americas | SR9050 is an acidic monoacrylate adhesion promoter that is recommended for use typically at 1-20% by weight in free radical polymerising UV and EB applications. This product is recommended for use in coatings and inks on glass and metals. | |
SR9051P | Sartomer Americas | SR9051P is a unique acidic triacrylate adhesion promoter that is typically recommended for use at 1-20% by weight in free-radical polymerization, UV and EB applications. This product is recommended to maximize adhesion of coatings, inks and adhesives on g...view more SR9051P is a unique acidic triacrylate adhesion promoter that is typically recommended for use at 1-20% by weight in free-radical polymerization, UV and EB applications. This product is recommended to maximize adhesion of coatings, inks and adhesives on glass and metals. view less | |
SR9054 | Sartomer Americas | SR9054 is a unique acid acrylate adhesion promoter that is typically recommended for use at 1 - 20% by weight in free-radical polymerization, UV and EB applications. It is recommended to maximize adhesion of coatings, inks and adhesives on glass and metal...view more SR9054 is a unique acid acrylate adhesion promoter that is typically recommended for use at 1 - 20% by weight in free-radical polymerization, UV and EB applications. It is recommended to maximize adhesion of coatings, inks and adhesives on glass and metals. view less | |
TEGO® AddBond LTH | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTH improves adhesion of coatings on metal and plastic substrates. It does not soften the coating film and can be used for solventborne, solvent-free, and radiation-curing coating systems | Request Sample |
ZAIKTHENE A | Sumitomo Seika Chemicals Co., Ltd. | ZAIKTHENE A is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE A shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has exce...view more ZAIKTHENE A is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE A shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. view less | |
ZAIKTHENE L | Sumitomo Seika Chemicals Co., Ltd. | ZAIKTHENE L is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE L shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has exce...view more ZAIKTHENE L is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE L shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. view less | |
ZAIKTHENE N | Sumitomo Seika Chemicals Co., Ltd. | ZAIKTHENE N is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE N shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has exce...view more ZAIKTHENE N is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE N shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. view less |