| ADDITOL® XL 122 | Allnex | ADDITOL® XL 122 is a paint additive to enhance mar resistance and slip and to improve flow and levelling in air drying and stoving paints. | Request Sample |
| ADDITOL® XW 329 | Allnex | Additol® XW 329 is a paint additive to enhance mar resistance and slip and levelling, particularly of water dilutable paints. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| ALUMINASOL™ AS-200 | Nissan Chemical America Corporation | ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistan...view more ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistance, bonding strength, film forming capacity and adhesion to the products it is applied to. view less | Request Sample |
| AQUACER® 1547 | BYK | AQUACER® 1547 is a wax emulsion for improving surface properties of water-borne can coatings. It is an anionic emulsion of an oxidized HD polyethylene wax. This product improves scratch resistance. | |
| AQUACER® 513 | BYK | AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...view more AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. view less | |
| AQUACER® 552 | BYK | AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems. | |
| AQUAMAT® 208 | BYK | AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scrat...view more AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance and soft feel effect. view less | |
| AQUAMAT® 263 | BYK | AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...view more AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. view less | |
| Boltorn™ P501 | Perstorp | Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cu...view more Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cured coatings while maintaining all the other properties of Boltorn™ P501. view less | |
| Boltorn™ P501 | Univar Solutions | Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cu...view more Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cured coatings while maintaining all the other properties of Boltorn™ P501. view less | |
| Borchi® Gol LA 2 | OMG Borchers GmbH | Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension r...view more Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. Borchi® Gol LA 2 is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints like hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine or epoxy systems. It also supports levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. This product is especially recommended in systems where solvent-free additives or certain solvents are required. To facilitate incorporation ability it may be helpful to dissolve Borchi® Gol LA 2 in solvents glycol-, aliphatic-, aromatic-, or ester-based. view less | |
| BRB Siloen® SMA 284 | BRB International BV | BRB Siloen® SMA 284 is an 80% active dispersion of a high molecular weight silicone gum. It can be used as a silicone additive for waterborne and solvent coatings providing excellent slip, mar resistance, gloss and anti-blocking effect. | |
| BYK®-306 | BYK | BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...view more BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. view less | |
| BYK®-333 | BYK | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....view more BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. view less | |
| CERACOL® 79 | BYK | CERACOL® 79 is a wax dispersion for improving surface properties of solvent-borne can coating formulations. It is composed of a carnauba wax dispersion. This product improves surface slip and scratch resistance. | |
| CERAFAK® 140N | BYK | CERAFAK® 140N is a wax dispersion for improving surface properties of solvent-borne can coatings. It is composed of a carnauba wax dispersion. This product is suitable for use in solvent-borne can coating formulations. The additive improves surface scratc...view more CERAFAK® 140N is a wax dispersion for improving surface properties of solvent-borne can coatings. It is composed of a carnauba wax dispersion. This product is suitable for use in solvent-borne can coating formulations. The additive improves surface scratch resistance and slip. view less | |
| CERAFLOUR® 920 | BYK | CERAFLOUR® 920 is a micronized organic polymer for matting water-borne and solvent-borne paint systems. This product can be used in most paint formulations. The additive improves the following surface properties: scratch resistance, sandability, metal mar...view more CERAFLOUR® 920 is a micronized organic polymer for matting water-borne and solvent-borne paint systems. This product can be used in most paint formulations. The additive improves the following surface properties: scratch resistance, sandability, metal marking resistance and gloss reduction. view less | |
| CERAFLOUR® 950 For Powder | BYK | CERAFLOUR® 950 For Powder is a matting additive for powder coatings. It is composed of micronized modified HD polyethylene wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. | |
| CERAFLOUR® 965 | BYK | CERAFLOUR® 965 is an efficient additive to achieve homogeneous fine structures. It is composed of micronized PTFE. This product is used in all common powder coating systems to achieve fine and very reproducible surface texturing. The additive creates homo...view more CERAFLOUR® 965 is an efficient additive to achieve homogeneous fine structures. It is composed of micronized PTFE. This product is used in all common powder coating systems to achieve fine and very reproducible surface texturing. The additive creates homogeneous textures even when the film thickness varies. view less | |
| CERAFLOUR® 994 | BYK | CERAFLOUR® 994 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of ultra fine micronized amide wax. This product is used in solvent-borne systems and powder coatings. | |
| CERAFLOUR® 999 | BYK | CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and ...view more CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and abrasion resistance. view less | |
| CERAMAT® 248 | BYK | CERAMAT® 248 is a flatting wax dispersion for improving surface properties of solvent-borne decorative paints. It is composed of a polyethylene wax dispersion. This product improves surface scratch resistance and gloss reduction. | |
| CERAMAT® 258 | BYK | CERAMAT® 258 is a wax dispersion for improving surface properties of solvent-borne wood and industrial coatings. It is an oxidized HD polyethylene wax dispersion. This product is suitable for use in solvent-borne furniture and parquet lacquers and industr...view more CERAMAT® 258 is a wax dispersion for improving surface properties of solvent-borne wood and industrial coatings. It is an oxidized HD polyethylene wax dispersion. This product is suitable for use in solvent-borne furniture and parquet lacquers and industrial coatings. view less | |
| COATOSIL* 2812 COATINGS ADDITIVE | Momentive | COATOSIL* 2812 COATINGS ADDITIVE is a linear silicone-polyether (EO) block copolymer with -OH end group. It can help reduce coefficient of friction (COF) and enhance slip and mar resistance in waterborne, water reducible, conventional and high-solids solv...view more COATOSIL* 2812 COATINGS ADDITIVE is a linear silicone-polyether (EO) block copolymer with -OH end group. It can help reduce coefficient of friction (COF) and enhance slip and mar resistance in waterborne, water reducible, conventional and high-solids solvent systems. Applications include waterborne coatings, solventborne coatings and solventless or high-solids coatings. view less | |
| COATOSIL* 3500 COATINGS ADDITIVE | Momentive | CoatOSil* 3500 coatings additive provides an excellent balance of properties in radiation cure coatings. It reduces coefficient of friction (COF) in acrylate based coatings, without generating foam or reducing gloss. This is possible because of its compat...view more CoatOSil* 3500 coatings additive provides an excellent balance of properties in radiation cure coatings. It reduces coefficient of friction (COF) in acrylate based coatings, without generating foam or reducing gloss. This is possible because of its compatibility in formulated coatings. view less | |
| COATOSIL* 3501 COATINGS ADDITIVE | Momentive | CoatOSil* 3501 coatings additive is Momentive's most powerful friction reducing agent, providing the maximum in coefficient of friction (COF) reduction for radiation-cured formulations in its portfolio of coatings additives. This additive also functions a...view more CoatOSil* 3501 coatings additive is Momentive's most powerful friction reducing agent, providing the maximum in coefficient of friction (COF) reduction for radiation-cured formulations in its portfolio of coatings additives. This additive also functions as an extremely efficient defoamer, especially in aqueous systems. view less | |
| COATOSIL* 3509 COATINGS ADDITIVE | Momentive | CoatOSil* 3509 coatings additive is a reactive 100% active slip agent that may help improve abrasion and mar resistance in UV and E Beam cured acrylate resins. Additional benefits include enhanced flow and leveling, substrate wetting and gloss retention. | |
| CRAYVALLAC® WN-1135 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance,...view more CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. view less | |
| CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...view more CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. view less | |
| CRAYVALLAC® WN-1535 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhanc...view more CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. CRAYVALLAC® WN-1535 is suitable for use in a wide range of solvent-based, water-based, solvent free and powder coatings applications. view less | |
| CRAYVALLAC® WW-1001 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the ...view more CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. view less | |
| DC Sealing Coating | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the prime...view more DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the primer. view less | |
| DOWSIL™ 11 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | |
| DOWSIL™ 11 Additive | Univar Solutions | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | |
| DOWSIL™ 14 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol fun...view more DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. view less | |
| DOWSIL™ 18 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| DOWSIL™ 210S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enha...view more DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. view less | |
| DOWSIL™ 211S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...view more DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. view less | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases...view more DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. view less | |
| DOWSIL™ 51 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 55 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, a...view more DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. view less | |
| DOWSIL™ 56 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | |
| DOWSIL™ 56 Additive | Univar Solutions | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | |
| DOWSIL™ 57 Additive | Univar Solutions | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | |
| DOWSIL™ 57 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | |
| Durazane® 1500 rapid cure | Merck | Durazane® 1500 rapid cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications. | |
| Durazane® 1500 slow cure | Merck | Durazane® 1500 slow cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications. | |
| Durazane® 5500 | Merck | Durazane® 5500 is a composite material consisting of an amorphous SiO2 core and a polymer cladding material. Since the nano particles are completely incoperated in a polymeric matrix, no nanoscalic dust is produced when the solvent is removed. The dried r...view more Durazane® 5500 is a composite material consisting of an amorphous SiO2 core and a polymer cladding material. Since the nano particles are completely incoperated in a polymeric matrix, no nanoscalic dust is produced when the solvent is removed. The dried residue has polymeric characteristics like film building and transparent properties. view less | |
| EBECRYL® 3418 | Allnex | EBECRYL® 3418 is a modified epoxy diacrylate that exhibits excellent reactivity and low viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical ...view more EBECRYL® 3418 is a modified epoxy diacrylate that exhibits excellent reactivity and low viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance. view less | Request Sample |
| EBECRYL® 50 | Allnex | EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured ...view more EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured coatings and inks. Besides its high reactivity, EBECRYL® 50 improves the hardness and solvent resistance of cured coatings and inks. This product is particularly useful in offset inks, flexo inks and overprint varnishes. view less | Request Sample |
| EBECRYL® 8602 | Allnex | EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion...view more EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion resistance. In addition, EBECRYL® 8602 does not contain intentionally added organic tin compounds, heavy metals* or quinones. view less | Request Sample |
| EBECRYL® 895 | Allnex | Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and E...view more Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. view less | Request Sample |
| Efka® 3229 | BASF Formulation Additives | Efka® 3229 is a very effective additive, which increases slip, surface smoothness and gloss. Due to its excellent compatability properties, it is very suitable for use in high gloss clear wood coatings. This product improves the orientation of matting age...view more Efka® 3229 is a very effective additive, which increases slip, surface smoothness and gloss. Due to its excellent compatability properties, it is very suitable for use in high gloss clear wood coatings. This product improves the orientation of matting agents in matted wood finishes and improves leveling and surface smoothness and gloss, increases scratch and abrasion resistance, prevents floating, and enhances anti-blocking characteristics. It is an organically modified polysiloxane. view less | |
| EFKA® SL 3030 | BASF Formulation Additives | EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysil...view more EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxane, this slip & leveling agent is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. view less | |
| EFKA® SL 3033 | BASF Formulation Additives | EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and crater...view more EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and cratering. It is an organically modified polysiloxane. view less | |
| EFKA® SL 3236 | BASF Formulation Additives | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...view more EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. view less | |
| Efka® SL 3239 | BASF Formulation Additives | Efka® SL 3239 (formerly Efka® 3239) is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters and ketones. It is insoluble in water. This product improves leveling and surface smoothness, increases slip and mar-resist...view more Efka® SL 3239 (formerly Efka® 3239) is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters and ketones. It is insoluble in water. This product improves leveling and surface smoothness, increases slip and mar-resistance and acts as a defoamer and de-aeration aid. Efka® SL 3239 is particularly recommended for these coatings: baking enamels based on alkyd, acrylic or polyester resins; acid-curable or polyurethane wood finishes particularly when applied by curtain coating; self-leveling epoxy flooring compounds; and UV-curable paper lacquers. view less | |
| Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) is a coating that is used for its anti-corrosion, adhesion, and acid, alkali, salt spray, solvent and weather resistance properties. It is commonly applied on the surface of stamping parts, autom...view more Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) is a coating that is used for its anti-corrosion, adhesion, and acid, alkali, salt spray, solvent and weather resistance properties. It is commonly applied on the surface of stamping parts, automobile chassis parts, wind driven generators, bridges, steel structures, and various metals. view less | |
| GENGLAZE® EC-2447 | Synthomer | GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally f...view more GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. view less | |
| HS972 | Tianyi Chemical Engineering Material Co., Ltd. | HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...view more HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 3.7 and 4.5. view less | |
| HS974 | Tianyi Chemical Engineering Material Co., Ltd. | HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...view more HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. view less | |
| HS976 | Tianyi Chemical Engineering Material Co., Ltd. | HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...view more HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. view less | |
| Inorganic Zinc Flake Anti-corrosive Coating (90-1) | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | Inorganic Zinc Flake Anti-Corrosive Coating (90-1) is a coating that is used for its anti-corrosion, and weather, oil, and climate resistance properties. It is commonly applied to the surface of automobiles, steel structures, and metal products. | |
| LUDOX® CL-P | Univar Solutions | LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...view more LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX® CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. view less | |
| LUDOX® CL-X | Univar Solutions | LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...view more LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. view less | |
| MOR-SHINE™ 4U | Synthomer | MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and...view more MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and high maintenance schedules. view less | |
| NANOBYK®-3603 | BYK | NANOBYK®-3603 is a surface additive based on aluminum oxide nanoparticles to improve the scratch resistance of aqueous systems without having a negative impact on properties such as gloss and transparency. As the aluminum oxide nanoparticles are very smal...view more NANOBYK®-3603 is a surface additive based on aluminum oxide nanoparticles to improve the scratch resistance of aqueous systems without having a negative impact on properties such as gloss and transparency. As the aluminum oxide nanoparticles are very small, it is even suitable for highly transparent and high-gloss coatings, and can be used in clear or pigmented systems. view less | |
| NANOBYK®-3605 | BYK | NANOBYK®-3605 is an additive containing nanoparticles for solvent-borne and solvent-free rad-cure systems to improve scratch and abrasion resistance. This product improves the scratch and abrasion resistance without negative impact on gloss and transparen...view more NANOBYK®-3605 is an additive containing nanoparticles for solvent-borne and solvent-free rad-cure systems to improve scratch and abrasion resistance. This product improves the scratch and abrasion resistance without negative impact on gloss and transparency. It also improves chemical resistance. view less | |
| NANOBYK®-3620 | BYK | NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying p...view more NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying period. NANOBYK® 3620 has no negative influences on the gloss and transparency, and is therefore particularly suitable for clear coats. view less | |
| NANOBYK®-3650 | BYK | NANOBYK®-3650 is a surface additive containing nanomaterials for solvent-borne systems to improve scratch resistance. This product is a dispersion of surface treated silica nanoparticles. It provides optimum surface protection by an immediate reflow effec...view more NANOBYK®-3650 is a surface additive containing nanomaterials for solvent-borne systems to improve scratch resistance. This product is a dispersion of surface treated silica nanoparticles. It provides optimum surface protection by an immediate reflow effect. This effect ensures that the coating surface is not damaged and remains nearly unharmed because the silica nanoparticles of these additives are uniformly distributed within the coating and work as a shock-absorbing system. Their interaction absorbes the impacting energy and releases it slowly. Along with this elasticity comes a consistent hardness of the film, and both give optimal long-term protection. view less | |
| NANOBYK®-3652 | BYK | NANOBYK®-3652 provides optimum surface protection by an immediate reflow effect. This effect ensures that the coating surface is not damaged and remains nearly unharmed because the silica nanoparticles of these additives are uniformly distributed within t...view more NANOBYK®-3652 provides optimum surface protection by an immediate reflow effect. This effect ensures that the coating surface is not damaged and remains nearly unharmed because the silica nanoparticles of these additives are uniformly distributed within the coating and work as a shock-absorbing system. Their interaction absorbes the impacting energy and releases it slowly. Along with this elasticity comes a consistent hardness of the film, and both give optimal long-term protection. view less | |
| NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
| NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
| NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
| ORGANOSILICASOL™ DMAC-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ DMAC-ST is colloidal silica mono-dispersed in the organic solvent N,N-Dimethyl acetamide . It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. | Request Sample |
| ORGANOSILICASOL™ EG-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ EG-ST is colloidal silica mono-dispersed in the organic solvent ethylene glycol. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. | Request Sample |
| ORGANOSILICASOL™ IPA-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many o...view more ORGANOSILICASOL™ IPA-ST is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-L | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-L is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-50 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many...view more ORGANOSILICASOL™ IPA-ST-L is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-50 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-UP | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-UP is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has ma...view more ORGANOSILICASOL™ IPA-ST-UP is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-ZL | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-ZL is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 70-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has ma...view more ORGANOSILICASOL™ IPA-ST-ZL is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 70-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MA-ST-MS | Nissan Chemical America Corporation | A colloidal silica dispersed in organic solvent. It is used to significantly improve the scratch, chip, and mar resistance of plastics, films, paints, varnishes, and inks. | Request Sample |
| ORGANOSILICASOL™ MEK-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MEK-ST is colloidal silica mono-dispersed in the organic solvent methyl ethyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and ha...view more ORGANOSILICASOL™ MEK-ST is colloidal silica mono-dispersed in the organic solvent methyl ethyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MIBK-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MIBK-ST is colloidal silica mono-dispersed in the organic solvent methyl isobutyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints an...view more ORGANOSILICASOL™ MIBK-ST is colloidal silica mono-dispersed in the organic solvent methyl isobutyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MT-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MT-ST is colloidal silica mono-dispersed in the organic solvent methanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many othe...view more ORGANOSILICASOL™ MT-ST is colloidal silica mono-dispersed in the organic solvent methanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ NPC-ST-30 | Nissan Chemical America Corporation | ORGANOSILICASOL™ NPC-ST-30 is colloidal silica mono-dispersed in the organic solvent EG mono-n-propyl ether with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints ...view more ORGANOSILICASOL™ NPC-ST-30 is colloidal silica mono-dispersed in the organic solvent EG mono-n-propyl ether with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ PMA-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ PMA-ST is colloidal silica mono-dispersed in the organic solvent propylene glycol monomethylether acetate with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics,...view more ORGANOSILICASOL™ PMA-ST is colloidal silica mono-dispersed in the organic solvent propylene glycol monomethylether acetate with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...view more R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. view less | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...view more R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. view less | |
| Raybo 26 Slikit | Raybo Chemical | Raybo 26 Slikit is a non-silicone based additive in a brown liquid form. This product is most commonly used to improve scratch and mar-resistance in air-dry and low-bake coating system applications. | |
| Raybo 43 MarHard | Raybo Chemical | Raybo 43 MarHard is a silicone-free additive in a workable paste to thin liquid form, depending on temperature. This product is most commonly used to improve scratch and mar resistance in solventborne bake coating and ink system applications. | |
| Raybo 68 HydroSlip | Raybo Chemical | Raybo 68 HydroSlip is a coating and ink additive in a white liquid form. This product is most commonly used to improve flow control, mar resistance, and slip in water-based and water-reducible coating and ink system applications. | |
| SI-TUFF™ SB-050G | Advanced Composite Materials, LLC | SI-TUFF™ SB-050G is an engineered silicon carbide blend, powered by a diamond-like microfiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resista...view more SI-TUFF™ SB-050G is an engineered silicon carbide blend, powered by a diamond-like microfiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in all forms of polymeric coatings, including liquid, spray-on, and powder applications. view less | |
| SI-TUFF™ SB-300G | Advanced Composite Materials, LLC | SI-TUFF™ SB-300G is an engineered blend powered by a diamond-like fiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductiv...view more SI-TUFF™ SB-300G is an engineered blend powered by a diamond-like fiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in all forms of polymeric coatings, including liquid, spray-on, and powder applications. view less | |
| SI-TUFF™ SC-050 | Advanced Composite Materials, LLC | SI-TUFF™ SC-050 is a diamond-like silicon carbide microfiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, tem...view more SI-TUFF™ SC-050 is a diamond-like silicon carbide microfiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. view less | |
| SI-TUFF™ SC-110 | Advanced Composite Materials, LLC | SI-TUFF™ SC-110 is an amine-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature st...view more SI-TUFF™ SC-110 is an amine-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. view less | |
| SI-TUFF™ SC-210 | Advanced Composite Materials, LLC | SI-TUFF™ SC-210 is an epoxy-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature st...view more SI-TUFF™ SC-210 is an epoxy-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. view less | |
| SI-TUFF™ SC-300 | Advanced Composite Materials, LLC | SI-TUFF™ SC-300 is a diamond-like silicon carbide fiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, tempera...view more SI-TUFF™ SC-300 is a diamond-like silicon carbide fiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. view less | |
| SLIP-AYD® FS 444 | Elementis | SLIP-AYD® FS 444 is a liquid additive for increasing surface slip and mar resistance of water borne and polar solvent borne coatings. | |
| SNOWTEX® IPA-ST-UP | Nissan Chemical America Corporation | SNOWTEX® IPA-ST-UP form a series of elongated particles. When compared to spherical silica particles the SNOWTEX® IPA-ST-UP elongated particles can provide many unique advantages. It features good film forming, good bonding, good migration, and high visco...view more SNOWTEX® IPA-ST-UP form a series of elongated particles. When compared to spherical silica particles the SNOWTEX® IPA-ST-UP elongated particles can provide many unique advantages. It features good film forming, good bonding, good migration, and high viscosity <20 mPa•s. This product is stabilized in IPA. It has applications as a coating agent for paper, plastics and metals, a binder for refractory, ceramic and glass fiber, and in textile treatments. view less | Request Sample |
| SNOWTEX® ST-20L | Nissan Chemical America Corporation | SNOWTEX® ST-20L is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s. Most recently, it has been used by the semiconductor industry as a polishing agent for silicon wafers. Other application...view more SNOWTEX® ST-20L is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s. Most recently, it has been used by the semiconductor industry as a polishing agent for silicon wafers. Other applications for SNOWTEX® ST-20L include a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings, refractory, anti-corrosion, and metal surface treatment. view less | Request Sample |
| SNOWTEX® ST-40 | Nissan Chemical America Corporation | SNOWTEX® ST-40 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <25 mPa•s. It has applications as a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings,...view more SNOWTEX® ST-40 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <25 mPa•s. It has applications as a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings, refractory, anti-corrosion, and metal surface treatments. view less | Request Sample |
