Acclaim® 8200 | Covestro | Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be use...view more Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be used in polyurethane and other applications, including cast elastomers, sealants, epoxy flexibilizers, defoamers, lubricants, crude oil de-emulsifiers, and plasticizers. As with any product, the use of Acclaim 8200 polyol in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
Acclaim® Polyol 4200 | Covestro | Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elast...view more Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Acclaim® Polyol 4200 can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). view less | |
Baybond® PU 130 | Covestro | Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...view more Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
Baybond® PU 330 | Covestro | Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. G...view more Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent filmforming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
Baybond® PU 401 A | Covestro | Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have ex...view more Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have excellent film-forming properties and very good adhesion. As with any product, use of Baybond® PU 401 A polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
Baybond® PU 402 A | Covestro | Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based o...view more Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 402 A are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. Baybond® PU 402 A is also very stable against shear forces. As with any product, use of Baybond® PU 402 A in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability view less | |
Baybond® PU 403 | Covestro | Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond...view more Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond PU® 403 have excellent film-forming properties, and very good adhesion. The mechanical properties of Baybond® PU 403 are improved by post-curing at 150ºC or above for 30 minutes. As with any product, Baybond® PU 403 polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
Baybond® PU 405 | Covestro | Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers us...view more Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 405 have excellent filmforming properties, adhesion and colorfastness. This product is also highly resistant to the effects of shear forces and hydrolysis. Full mechanical properties of Baybond® PU 405 are developed by post-crosslinking for 20 minutes @ 170°C. As with any product, use of Baybond® PU 405 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
Baybond® PU 406 | Covestro | Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing. It is also useful for the sizing of glass fibers used to reinforce thermop...view more Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing. It is also useful for the sizing of glass fibers used to reinforce thermoplastics and has excellent film-forming properties and adhesion. Baybond® PU 406 also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 406 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
Baybond® XP 2728 | Covestro | Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber...view more Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XP 2728 are characterized by their outstanding film-forming properties and very good adhesion. Baybond® XP 2728 exhibits outstanding hydrolysis resistance and colorfastness, and is also very stable against shear forces. As with any product, use of Baybond® XP 2728 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
Bayhydrol® A 242 | Covestro | Bayhydrol® A 242 is a polyacrylic resin used as a coreactant for Bayhydur® and Desmodur® N polyisocyanates in the formulation of aqueous two component polyurethane systems for various applications by brush, roller or spray. | |
Bayhydrol® HD 2016 | Covestro | Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with othe...view more Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with other water-reducible binders. view less | |
Bayhydrol® HD 2017 | Covestro | Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. | |
Bayhydrol® PR 435 | Covestro | Bayhydrol® PR 435 is an aqueous aliphatic polyurethane dispersion that contains only 5% by weight of organic cosolvent. | |
Bayhydrol® UV 2280 | Covestro | Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking,...view more Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking, the coated surfaces can be sanded before UV curing. Additions of 1.0 to 2.5% by weight photoinitiator, calculated on the solid binder, have proved suitable for initiating the curing reaction. view less | |
Bayhydur® 304 | Covestro | Bayhydur® 304 is a hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is primarily used as the crosslinker for aqueous polyol binders (Bayhydrol). | |
Bayhydur® 305 | Covestro | Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is ...view more Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is a key requirement. view less | |
Bayhydur® 401-70 | Covestro | Bayhydur® 401-70 is a water-dispersible polyisocyanate based on Isophorone Diisocyanate (IPDI) and dissolved in 1-methoxypropylacetate-2/xylene, 1:1. It is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol range. | |
Bayhydur® BL XP 2706 | Covestro | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...view more Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. view less | |
Bayhydur® XP 2487/1 | Covestro | Bayhydur® XP 2487/1 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. | |
Bayhydur® XP 2547 | Covestro | Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins s...view more Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins such as Bayhydrol® XP 2542. view less | |
Bayhydur® XP 2655 | Covestro | Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorpora...view more Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistances are required. view less | |
Bayhydur® XP 2700 | Covestro | Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applica...view more Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. view less | |
Bayhytherm® 3146 | Covestro | Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. | |
Baymedix® AP501 | Covestro | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
Baymedix® AR602 | Covestro | Baymedix® AR602 is a polyether polyol based on a tetra-functional starter molecule. | |
Baymedix® CD102 | Covestro | Baymedix® CD102 is an aqueous polyurethane dispersion. | |
Baymedix® CD104 | Covestro | Baymedix® CD104 is an aqueous polyurethane dispersion. | |
Baymedix® FD103 | Covestro | Baymedix® FD103 is an aqueous polyurethane dispersion. | |
Baymedix® FP503 | Covestro | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...view more BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. view less | |
BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...view more BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. view less | |
BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...view more BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. view less | |
BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...view more BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. view less | |
BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...view more BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. view less | |
BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...view more BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. view less | |
BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...view more BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. view less | |
BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...view more BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. view less | |
BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...view more BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. view less | |
BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...view more BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. view less | |
BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...view more BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. view less | |
BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...view more BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. view less | |
BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...view more BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. view less | |
BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...view more BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. view less | |
BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...view more BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. view less | |
BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...view more BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. view less | |
Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curta...view more Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curtain coating and adhesive cements. view less | |
Desmodur® BL 3272 MPA | Covestro | Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings w...view more Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings whose baking temperature can be reduced by the addition of a catalyst, e.g. 0.3 - 1.0 % DBTL, without influencing the storage stability of the ready-to-use formulation. view less | |
Desmodur® BL 3370 MPA | Covestro | Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable o...view more Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 3370 MPA are used for the industrial finishing of appliances, coil coating, can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. view less | |
Desmodur® BL 3475 BA/SN | Covestro | Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack bakin...view more Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings, especially for cans and tubes. The product can also be used as an additive to improve the reactivity, flexibility and adhesion of conventional baking systems. view less | |
Desmodur® BL 4265 SN | Covestro | Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relative...view more Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 4265 SN blocked polyisocyanate are used for the industrial finishing of appliances, coil coating, and can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. view less | |
Desmodur® BL 5375 | Covestro | Desmodur® BL 5375 is a blocked aliphatic crosslinking stoving urethane resin based on HMDI and dissolved in solvent naptha 100/1-methoxypropylacetate-2, 1:1. It was developed as a hardener component for lightfast one-pack stoving polyurethane systems. As ...view more Desmodur® BL 5375 is a blocked aliphatic crosslinking stoving urethane resin based on HMDI and dissolved in solvent naptha 100/1-methoxypropylacetate-2, 1:1. It was developed as a hardener component for lightfast one-pack stoving polyurethane systems. As with air-drying two-pack PU coatings, the film properties can be influenced by the crosslinking density and the selection of hydroxylbearing polyol co-reactant. view less | |
Desmodur® E 1160 MPA/X | Covestro | Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for m...view more Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and chemical damage. view less | |
Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...view more Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. view less | |
Desmodur® E 21 | Covestro | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned w...view more Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. view less | |
Desmodur® H | Covestro | Desmodur® H is a monomeric aliphatic diisocyanate. It is used mainly in the manufacture of polyisocyanates, for example, polyurethane coating raw materials. | |
Desmodur® HL BA | Covestro | Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of...view more Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of coatings using Desmodur® HL BA are considerably shorter than those of coatings based on Desmodur® CB polyisocyanates and somewhat longer than those based on Desmodur® IL polyisocyanate. view less | |
Desmodur® I | Covestro | Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and po...view more Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. view less | |
Desmodur® IL 1351 51% BA | Covestro | Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 51% in butyl acetate. Can be used in combination with Desmophen® 1300 for the formulation of very fast drying, two-component polyurethane ...view more Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 51% in butyl acetate. Can be used in combination with Desmophen® 1300 for the formulation of very fast drying, two-component polyurethane coatings. Such systems are used in the furniture industry, among others, where very short drying times and early sandability are required. view less | |
Desmodur® IL 1451 | Covestro | Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is ...view more Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is most important in industrial wood and furniture finishing. view less | |
Desmodur® IL BA | Covestro | Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coati...view more Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coatings based on Desmodur® IL BA lend themselves to applications requiring high production rates and fast dry-to-handle times. Wood coatings formulated with Desmodur® IL BA show quick sanding properties. The applied finishes show little tendency to run from sharp edges. view less | |
Desmodur® IL EA | Covestro | Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used i...view more Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used in combination with various Baycoll® products or other hydroxyl-bearing substances to formulate adhesives. Because of its fast drying, Desmodur IL EA is mainly used in coatings for on-line applications, like the packaging industry or in industrial furniture finishing. view less | |
Desmodur® L 67 BA | Covestro | Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-c...view more Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings. Systems crosslinked with Desmodur® L 67 BA can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. view less | |
Desmodur® L 67 MPA/X | Covestro | Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to ...view more Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to formulate air-drying twocomponent polyurethane coatings. Systems crosslinked with Desmodur® L 67 MPA/X can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. view less | |
Desmodur® L 75 | Covestro | Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formul...view more Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings and adhesives. Systems crosslinked with Desmodur L 75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. It is also suitable for room-temperature crosslinking of adhesives based on Desmocoll® or Baycoll®. These can be used to bond many materials,e.g. wood, metal and plastic. view less | |
Desmodur® N 100 | Covestro | Desmodur® N 100 is a solvent-free, aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Recommended for use in two-component clear and pigmented interior and exterior finishes. Coatings based on Desmodur N 100, exhibit excellent gloss...view more Desmodur® N 100 is a solvent-free, aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Recommended for use in two-component clear and pigmented interior and exterior finishes. Coatings based on Desmodur N 100, exhibit excellent gloss retention and weather resistance when formulated with proper hydroxyl-functional coreactants. These coatings also have very good resistance to solvents, chemicals, and abrasion. view less | |
Desmodur® N 100A | Covestro | Desmodur® N 100A is a solvent-free, aliphatic polyisocyanate (HDI biuret). | |
Desmodur® N 3200 | Covestro | Desmodur® N 3200 is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Coatings formulated with Desmodur® N 3200 polyisocyanate show the same final properties as those based on Desmodur® N 100. It is particularly suit...view more Desmodur® N 3200 is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Coatings formulated with Desmodur® N 3200 polyisocyanate show the same final properties as those based on Desmodur® N 100. It is particularly suitable for the formulation of high-solids two-component coating materials for a variety of applications. view less | |
Desmodur® N 3200A | Covestro | Desmodur® N 3200A is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). | |
Desmodur® N 3400 | Covestro | Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending ...view more Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending on the polyol used, the coatings yield tough but flexible films that can be either soft or extremely hard, have good resistance to chemicals and solvents, good weather stability and good resistance to abrasion. view less | |
Desmodur® N 3600 | Covestro | Desmodur® N 3600 is a low viscosity solvent-free polyfunctional aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used primarily as the hardener component for light- fast two-pack polyurethane coatings with high resistance to chemi...view more Desmodur® N 3600 is a low viscosity solvent-free polyfunctional aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used primarily as the hardener component for light- fast two-pack polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. The main applications for systems based on Desmodur® N 3600 are air and force drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing and plastics. view less | |
Desmodur® N 3790 BA | Covestro | Desmodur® N 3790 BA is an aliphatic polyisocyanate (high functional HDI trimer) supplied at 90% solids in n-butyl acetate. Used primarily as the hardener component for lightfast two-pack polyurethane coatings with high resistance to chemicals and weatheri...view more Desmodur® N 3790 BA is an aliphatic polyisocyanate (high functional HDI trimer) supplied at 90% solids in n-butyl acetate. Used primarily as the hardener component for lightfast two-pack polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. The main applications for systems based on Desmodur® N 3790 BA are air and force-drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing and plastics. view less | |
Desmodur® N 3800 | Covestro | Desmodur® N 3800 is a solvent free flexibilizing aliphatic polyisocyanate. In combination with suitable polyols, it can be used in the formulation of highly flexible coatings that are stable to accelerated and outdoor weathering. These can be used for coa...view more Desmodur® N 3800 is a solvent free flexibilizing aliphatic polyisocyanate. In combination with suitable polyols, it can be used in the formulation of highly flexible coatings that are stable to accelerated and outdoor weathering. These can be used for coating plastics. The use of Desmodur® N 3800 as a combination hardener component makes it possible to adjust the flexibility of the polyol mill base. The product can also be used as a flexibilizing component in other applications, e.g. stone-chip protection systems, vehicle repair systems. view less | |
Desmodur® N 75 MPA/X | Covestro | Desmodur® N 75 MPA/X is an aliphatic polyisocyanate that acts as the hardener component for lightfast polyurethane coating systems. | |
Desmodur® W | Covestro | Desmodur® W is a liquid cycloaliphatic diisocyanate used as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. | |
Desmodur® Z 4470 BA | Covestro | Desmodur® Z 4470 BA is an aliphatic polyisocyanate for use as the hardener component for lightfast polyurethane coating systems and as an additive resin for alkyd spray coatings. | |
Desmodur® Z 4470 MPA/X | Covestro | Desmodur® Z 4470 MPA/X is an aliphatic polyisocyanate for use as the hardener component for lightfast polyurethane coating systems and as an additive resin for alkyd spray coatings. | |
Desmodur® Z 4470 SN | Covestro | Desmodur® Z 4470 SN is an aliphatic polyisocyanate based on isophorone diisocyanate and dissolved in aromatic 100. Has better solubility and compatibility. Mainly used as an additive resin to accelerate drying, curing and chemical crosslinking. | |
Desmodur® Z 4470 SN/BA | Covestro | Desmodur® Z 4470 SN/BA is an aliphatic polyisocyanate based on isophorone diisocyanate dissolved in Aromatic 100 and n-butyl acetate. Better solubility and compatibility. Mainly used as an additive resin to accelerate drying, curing and chemical crossl...view more Desmodur® Z 4470 SN/BA is an aliphatic polyisocyanate based on isophorone diisocyanate dissolved in Aromatic 100 and n-butyl acetate. Better solubility and compatibility. Mainly used as an additive resin to accelerate drying, curing and chemical crosslinking. view less | |
Desmophen® 1300 BA | Covestro | Desmophen® 1300 BA is a polyester polyol. Form supplied is approximately 75% in butyl acetate. This polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used for clear and p...view more Desmophen® 1300 BA is a polyester polyol. Form supplied is approximately 75% in butyl acetate. This polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used for clear and pigmented finishes for wood, chipboard and hardboard. view less | |
Desmophen® 1300 X | Covestro | Desmophen® 1300 X polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. Desmophen 1300 X is a polyester...view more Desmophen® 1300 X polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. Desmophen 1300 X is a polyester polyol, and the form supplied is approximately 75% in xylene. view less | |
Desmophen® 631 MPA | Covestro | Desmophen® 631 MPA is a saturated polyester resin. | |
Desmophen® 650 MPA | Covestro | Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester used as a co-reactant, usually with Desmodur N 75, in the formulation of lightfast and weather-stable, two-pack polyurethane coatings. | |
Desmophen® 650A 65 PMA | Covestro | Desmophen® 650A 65 PMA is a saturated polyester resin that is used as a coreactant for Desmodur N polyisocyanates two-component polyurethane coatings. | |
Desmophen® 651 MPA | Covestro | Desmophen® 651 MPA is a branched hydroxyl-bearing polyester used as a co-reactant, usually with Desmodur N 75, in the formulation of lightfast and weather-stable two-pack coatings. | |
Desmophen® 670 BA | Covestro | Desmophen® 670 BA is a slightly branched, hydroxyl- bearing polyester. Form supplied is approximately 80% in butyl acetate. Desmophen® 670 BA is used primarily in the formulation of weather-stable flexible coatings. | |
Desmophen® C 1100 | Covestro | Desmophen® C 1100 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 1,000. It is a solvent-free medium viscosity liquid used for high-grade building blocks for a variet...view more Desmophen® C 1100 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 1,000. It is a solvent-free medium viscosity liquid used for high-grade building blocks for a variety of polyurethane systems. Applications for Desmophen® C 1100 include both interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. view less | |
Desmophen® C 1200 | Covestro | Desmophen® C 1200 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 2,000. It is a solvent-free medium viscosity liquid used for binder for high-grade flexible coatings...view more Desmophen® C 1200 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 2,000. It is a solvent-free medium viscosity liquid used for binder for high-grade flexible coatings and sealers. Possible applications include decorative coatings, sealing compounds and joint sealants. view less | |
Desmophen® C 2100 | Covestro | Desmophen® C 2100 is a linear hydroxyl-terminated, aliphatic polycarbonate diol with an average molecular weight of approximately 1,000. It is solvent free and waxy at room temperature. It can be used in high-grade building blocks for a variety of polyur...view more Desmophen® C 2100 is a linear hydroxyl-terminated, aliphatic polycarbonate diol with an average molecular weight of approximately 1,000. It is solvent free and waxy at room temperature. It can be used in high-grade building blocks for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. view less |