UL Prospector
Prospector

Success!

Successfully saved your search
45 Results
1488 VT/OIL Copolymer Resin Gabriel Performance Products 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...view more 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). view less
4070-M-60 L/S Alkyd Resin Gabriel Performance Products 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints.
BECKOSOL® 3859-Z-80 Polynt Composites BECKOSOL® 3859-Z-80 is a short oil, rosin/phenolic modified alkyd resin that can be used in lift resistant primers for lacquers and other strong solvent topcoats and interior machinery shop coats. This product conforms with TT-P-664D corrosion-inhibiting ...view more BECKOSOL® 3859-Z-80 is a short oil, rosin/phenolic modified alkyd resin that can be used in lift resistant primers for lacquers and other strong solvent topcoats and interior machinery shop coats. This product conforms with TT-P-664D corrosion-inhibiting primers and compliance primers that need to meet VOC regulations. It exhibits good corrosion resistance and provides good adhesion to a variety of surfaces. view less
Benasol 4V Benasedo Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment.
BENASOL AS 308 in XYLENE Benasedo BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...view more BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. view less
BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) Benasedo BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...view more BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. view less
BENASOL AS 3716 Benasedo BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...view more BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. view less
BYD-1403 Tianyi Chemical Engineering Material Co., Ltd. BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. Th...view more BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. This product is non-toxic. Its substrate is an aromatic waterborne polyurethane. view less
BYK-3755 BYK BYK-3755 is a silicone-containing surface additive with extended food contact compliance for solvent-borne coating systems with a medium reduction in surface tension and a medium increase in surface slip. Request Sample
BYK-3756 BYK BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases ...view more BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases surface slip. view less Request Sample
CHS-Alkyd C 351 E 75 Spolchemie CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated ...view more CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 E 75 is primarily used for stove coatings and paints constructed on nitrocellulose. view less
CHS-Alkyd C 351 X 60 Spolchemie CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be a...view more CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 X 60 is primarily used for stove coatings and paints fabricated on nitrocellulose. view less
CHS-Epoxy 101 X 60 Spolchemie CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination w...view more CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination with melamine-formaldehyde resins. view less
Crestakyd® 30-5016 Scott Bader Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties.
Crestakyd® 41-6010 Scott Bader Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels.
Disvacryl-1001 D.S.V. Chemicals Pvt. Ltd. Disvacryl-1001 is a thermosetting acrylic resin. This product includes xylene and butanol as volatile byproducts. It can be used in high-quality domestic appliance and OEM automotive finishes.
Disvacryl-1010 D.S.V. Chemicals Pvt. Ltd. Disvacryl-1010 is a thermoplastic acrylic resin. This product includes naphtha solvents as a volatile byproduct. It can be used in high-quality air-drying coatings that provide good gloss and durability.
Disvacryl-1011 D.S.V. Chemicals Pvt. Ltd. Disvacryl-1011 is a thermoplastic acrylic resin. This product includes xylene and naphtha solvents as volatile byproducts. It can be used in high-quality air-drying coatings for domestic appliances which provide good gloss and durability.
Disvalkyd-544 D.S.V. Chemicals Pvt. Ltd. Disvalkyd-544 is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in stoving enamels, and nitrocellulose paints, primers, and putty.
Disvalkyd-544 LV D.S.V. Chemicals Pvt. Ltd. Disvalkyd-544 LV is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in high-gloss stoving enamels.
Disvamine-702 D.S.V. Chemicals Pvt. Ltd. Disvamine-702 is a butylated amino resin. This product is a melamine formaldehyde resin. It is soluble in butanol. Disvamine-702 can be used in stoving enamels and roller coatings.
Domacryl 5130 70 BAc HELIOS RESINS Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and ma...view more Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and maintenance coatings. view less
DOWSIL™ 8590 Additive Dow Performance Silicones DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...view more DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. view less
Epoxies® 70-3812 NC Epoxies, Etc. Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...view more Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. view less
FINE-CLAD® M-8731 Polynt Composites FINE-CLAD® M-8731, in the form of solid, clear granules, is a carboxyl-functional polyester resin designed to cure with bisphenol A epoxy resins in office furniture coatings, machinery and equipment, general metals, major appliances, and lawn and garden a...view more FINE-CLAD® M-8731, in the form of solid, clear granules, is a carboxyl-functional polyester resin designed to cure with bisphenol A epoxy resins in office furniture coatings, machinery and equipment, general metals, major appliances, and lawn and garden applications. This product features good flowability with pre-catalyzed high reactivity. view less
Idroben 4705 Benasedo Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with ...view more Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with amino - resins. view less
Idroben 827 Benasedo Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying...view more Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying or dipping. view less
ISOBEN 5 Benasedo ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pig...view more ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pigmented or clear finishes, for metals, in automotive industry, marine superstructures and concrete manucfatures . view less
JONCRYL® 1540 BASF Dispersions & Resins JONCRYL 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is sui...view more JONCRYL 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is suitable for metal and hardboard applications. view less
Polyester Modified Silicon Resin SM1072A Jiangsu Sanmu Group Corporation SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and...view more SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and yellowing resistance. SM1072A can be widely used in heat resisting coatings, used as a basic resin for non-stick coatings and special coatings for frying pans, electric cookers, ovens, stoves, toasters, electric irons, kitchen ventilators, and gas stoves. view less
R2-3930-11 NuSil Silicone Technology 1 R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications w...view more R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance. It has strong physical attributes which make it bond aggressively to most surfaces. view less
R3-1075 NuSil Silicone Technology 1 R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It ca...view more R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It can also be utilized as a conformal coating for electrical and electronic components including rigid and flexible printed circuit boards. view less
SCD 1040 Etna Tec Limited, LLC SCD 1040 is an oil-free polyester resin that is designed precisely for low VOC finishes. This product is compatible with alkyds and acrylics when used as a modifier to improve dry film properties. It is primarily used in machinery coatings, high solids ba...view more SCD 1040 is an oil-free polyester resin that is designed precisely for low VOC finishes. This product is compatible with alkyds and acrylics when used as a modifier to improve dry film properties. It is primarily used in machinery coatings, high solids baking enamels, and automotive OEM. view less
SCD 1066 Etna Tec Limited, LLC SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and prim...view more SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and primers, but can also be used for adhesives, appliance coatings, and container coatings. view less
SCD 1091 Etna Tec Limited, LLC SCD 1091 is an oil-free polyester resin that is designed specifically for excellent adhesion to a variety of metal and plastic substrates. It also offers a hardness/flexibility ratio at low temperature cure cycles while retaining excellent film properties...view more SCD 1091 is an oil-free polyester resin that is designed specifically for excellent adhesion to a variety of metal and plastic substrates. It also offers a hardness/flexibility ratio at low temperature cure cycles while retaining excellent film properties. When modifies with SCD 1040, less than 3.0 pounds/gallon V.O.C. coatings can be formulated with SCD 1091. view less
SCD 6150 Etna Tec Limited, LLC SCD 6150 is an oil-free polyester resin that offers a good cure response and high film hardness. This product can also offer corrosion resistance and excellent film properties. It is often used as a non-fugitive adhesion promoter, and is primarily used fo...view more SCD 6150 is an oil-free polyester resin that offers a good cure response and high film hardness. This product can also offer corrosion resistance and excellent film properties. It is often used as a non-fugitive adhesion promoter, and is primarily used for machinery coatings and general industrial finishing. view less
SILIKOFTAL® HTT Evonik Operations GmbH, BL Coating Additives SILIKOFTAL® HTT is a silicone polyester resin for the production of decorative coatings. It is a clear to slightly hazy liquid used for non-stick coatings in combination with Polytetrafluoroethylene (PTFE) and decorative coatings of cookware, household ap...view more SILIKOFTAL® HTT is a silicone polyester resin for the production of decorative coatings. It is a clear to slightly hazy liquid used for non-stick coatings in combination with Polytetrafluoroethylene (PTFE) and decorative coatings of cookware, household appliances, and electric and gas heaters with a permanent thermal stability of 250°C. Some special features of SILIKOFTAL® HTT include excellent dishwasher detergent resistance, low yellowing, good gloss retention, and without addition of organotin-containing compounds. view less Request Sample
SILIKOFTAL® NON-STICK 60 Evonik Operations GmbH, BL Coating Additives SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. Request Sample
WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) Worlée-Chemie G.m.b.H. WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufac...view more WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufacture of high quality 2 component top coats. Paints based on W´Cryl A 2445 show excellent resistances against weather and chemicals. view less
WorléeKyd S 549 (55% In White Spirit 135-175) Worlée-Chemie G.m.b.H. WorléeKyd S 549 (55% In White Spirit 135-175) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is comp...view more WorléeKyd S 549 (55% In White Spirit 135-175) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is compatible with most medium and long oil air drying alkyd resins. view less
WorléeKyd S 549 (55% In White Spirit 145-195) Worlée-Chemie G.m.b.H. WorléeKyd S 549 (55% In White Spirit 145-195) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is a me...view more WorléeKyd S 549 (55% In White Spirit 145-195) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is a medium fatty alkyd resin for universal use. Due to the good properties like fast drying, gloss retention and good weather resistance, high quality industrial, vehicle, car body, dipping and flow coat paints as well as do-it-yourself and radiator paints can be produced. view less
WorléeKyd SO 554 Worlée-Chemie G.m.b.H. WorléeKyd SO 554 is a medium oil, fast drying alkyd resin for air drying industrial, vehicle, and machine paints, as well as for odor and dearomatized do-it-yourself and radiator paints. This grade has a non volatile content of 55% ± 1.
WorléeKyd V 162 Worlée-Chemie G.m.b.H. WorléeKyd V 162 is a medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, machinery, and radiator paints. This grade has a non volatile content of 55% ± 1. W´Kyd V 162 is compatible with many short and medium oil alkyd...view more WorléeKyd V 162 is a medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, machinery, and radiator paints. This grade has a non volatile content of 55% ± 1. W´Kyd V 162 is compatible with many short and medium oil alkyd resins. view less
WorléeKyd V 543 (55% In White Spirit 145-195) Worlée-Chemie G.m.b.H. WorléeKyd V 543 (55% In White Spirit 145-195) is a medium oil, fast drying alkyd resin for use in air and force drying industrial, machinery, and car repair paints. It is also used in fast drying do-it-yourself and radiator paints. This grade has a non vo...view more WorléeKyd V 543 (55% In White Spirit 145-195) is a medium oil, fast drying alkyd resin for use in air and force drying industrial, machinery, and car repair paints. It is also used in fast drying do-it-yourself and radiator paints. This grade has a non volatile content of 55% ± 1. view less
WorléeKyd V 543 (55% In White Spirit 145-195/ XYLENE) Worlée-Chemie G.m.b.H. WorléeKyd V 543 (55% In White Spirit 145-195/ XYLENE) is a medium oil, fast drying alkyd resin for use in air and forced drying industrial, machinery, and car repair paints. It is also used for fast drying do-it-yourself and radiator paints. This grade ha...view more WorléeKyd V 543 (55% In White Spirit 145-195/ XYLENE) is a medium oil, fast drying alkyd resin for use in air and forced drying industrial, machinery, and car repair paints. It is also used for fast drying do-it-yourself and radiator paints. This grade has a non volatile content of 55% ± 1. This product has good gloss, yellowing resistance, and good compatibility with other resins. view less