| 1070 | GIMEL Technical Materials | 1070 is a phosphate methacrylate compound used in vacuum metallization coatings and other metal coatings. It has excellent adhesion to metal with applications in vacuum metallization coating and other metal coating. | Request Sample |
| 2002A | GIMEL Technical Materials | 2002A is a difunctional special modified urethane acrylate used in UV inkjets, flexo inks, adhesives, nail gels, and high-solid coatings. With excellent toughness and a fast curing response, it provides good adhesion to glass, metal, and plastic with exce...view more 2002A is a difunctional special modified urethane acrylate used in UV inkjets, flexo inks, adhesives, nail gels, and high-solid coatings. With excellent toughness and a fast curing response, it provides good adhesion to glass, metal, and plastic with excellent pigment wetting and high gloss. It is suitable for use in UV inkjet, flexo ink, adhesive, nail gel, and high solid coating. view less | Request Sample |
| 2112 | GIMEL Technical Materials | 2112 is a twelve-functional urethane acrylate used in plastic coatings and vacuum metallization top coatings. It shows high hardness, good abrasion, and scratch resistance, and excellent compatibility. | Request Sample |
| 2115A | GIMEL Technical Materials | 2115A is a fifteen-functional urethane acrylate used in plastic coatings and vacuum metallization top coatings. It shows high hardness, a fast curing response that promotes surface curing, and excellent abrasion and scratch resistance. | Request Sample |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...view more 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. view less | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less | |
| 4983-BA-70 High Solids Epoxy Ester Resin | Gabriel Performance Products | 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance. | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| 6031 | GIMEL Technical Materials | 6031 is a trifunctional polyester acrylate used in inks and coatings for glass and metal. It has excellent adhesion to glass and metal with good pigment wetting and boiling water resistance. | Request Sample |
| AB-30F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-30F is NMP free aliphatic urethane dispersion with low temperature flexibility and good hydrolysis resistance and is used as a modifier in coatings to improve flexibility. It is applicable for numerous different coatings such as, plastic, metal, wood, ...view more AB-30F is NMP free aliphatic urethane dispersion with low temperature flexibility and good hydrolysis resistance and is used as a modifier in coatings to improve flexibility. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. view less | |
| AB-72FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. | |
| AB-91F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-91F is NMP free aliphatic urethane dispersion that has medium hardness, good hydrolytic stability, tough, good adhesion, and more. It is applicable for numerous different coatings such as, plastic, metal, industrial, and more. | |
| ACRONAL® PRO 761 | BASF Dispersions & Resins | ACRONAL PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corros...view more ACRONAL PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corrosion protection pigments and extenders allows systems to be formulated with outstanding corrosion protection properties.This product is recommended for applications such as interior/exterior general industrial metal coating applications and industrial maintenance applications. view less | |
| ACRONAL® PRO 770 NA | BASF Dispersions & Resins | ACRONAL PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONAL PRO 770 shows outstanding anti-corrosiv...view more ACRONAL PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONAL PRO 770 shows outstanding anti-corrosive properties both in glossy DTM and matte monocoat/ primer applications without or with only limited addition of phosphate anticorrosive pigments. view less | |
| AD-4000L | Chan Sieh Enterprises Co, Ltd. | AD-4000L is an ethylene vinyl acetate copolymer adhesive resin in the form of a white emulsion. This product features good heat resistance and excellent bonding strength with PVC sheet. It can be used as an adhesive for aluminum foil and paper, and in t...view more AD-4000L is an ethylene vinyl acetate copolymer adhesive resin in the form of a white emulsion. This product features good heat resistance and excellent bonding strength with PVC sheet. It can be used as an adhesive for aluminum foil and paper, and in the lamination of PVC sheet and plywood. view less | |
| Akuapol AL 2200 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2200 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2300 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2300 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2400 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2400 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 4500 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 4500 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Aliphatic Urethane Acrylate SU 512 | Soltech Ltd | Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings...view more Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings, plastic coatings, and ink. Aliphatic Urethane Acrylate SU 512 is 85% polymer solid by weight with a mPa.s viscosity of 3,000-5,000 at 60℃. view less | |
| Aliphatic Urethane Acrylate SU 5225 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5225 is a di-functional aliphatic urethane acrylate oligomer containing isobonyl acrylate monomer that is designed to provide toughness, flexibility, adhesion, durability, and high elongation. This product is commonly used i...view more Aliphatic Urethane Acrylate SU 5225 is a di-functional aliphatic urethane acrylate oligomer containing isobonyl acrylate monomer that is designed to provide toughness, flexibility, adhesion, durability, and high elongation. This product is commonly used in applications such as cork coatings, metal coatings, plastic coatings, and wood fillers, and . Aliphatic Urethane Acrylate SU 5225 is 70% polymer solid by weight with an mPa.s viscosity of 20,000-50,000 at 60℃. view less | |
| Aliphatic Urethane Acrylate SU 5270 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigmen...view more Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigment coatings for wood, and screen inks. Aliphatic Urethane Acrylate SU 5270 is 100% polymer solid by weight with an mPa.s viscosity of 7,000-11,000 at 25℃. view less | |
| Aliphatic Urethane Acrylate SU 542 | Soltech Ltd | Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings,...view more Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 542 is 100% polymer solid by weight with a mPs.s viscosity of 500-1,000 at 60℃. view less | |
| Aliphatic Urethane Acrylate SU 543 | Soltech Ltd | Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, ...view more Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 543 is 100% polymer solid by weight with a mPs.s viscosity of 100-300 at 60℃. view less | |
| Aliphatic Urethane Acrylate SU 580 | Soltech Ltd | Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, ...view more Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, adhesives for glass, metal coatings, plastic coatings, and screen ink binders. Aliphatic Urethane Acrylate SU 580 is 100% polymer solid by weight with an mPa.s viscosity of 13,000-19,000 at 60℃. view less | |
| Aliphatic Urethane Acrylate SU 584 | Soltech Ltd | Aliphatic Urethane Acrylate SU 584 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, and light color. This product is commonly used in applications such as pigment coatings for wood, metal coat...view more Aliphatic Urethane Acrylate SU 584 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, and light color. This product is commonly used in applications such as pigment coatings for wood, metal coatings, plastic coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 584 is 88% polymer solid by weight with an mPa.s viscosity of 1,500-2,500 at 60℃. view less | |
| Altor™ 200 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 200 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. The formulation is designed to be tough but flexible, lightfast and for highly reactive two-component polyurethane spray coatings. | |
| Altor™ 201 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 201 polyaspartic ester is a low-color, solvent-free amine-functional reactive partner for polyisocyanates. This low viscosity amine functional resin was developed for use in the formulation of high solids two-component polyurethane-urea coatings. | |
| Altor™ 202 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 202 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. This was product was designed for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. | |
| Altor™ 205 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as wel...view more Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as well as stain, scratch, and mar resistance. This product is recommended for concrete coatings, primed steel coatings, exterior railcar coatings, clean room coatings, institutional coatings, and windmill coatings. view less | |
| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| AR-511 | Chan Sieh Enterprises Co, Ltd. | AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromat...view more AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromatics, and esters. view less | |
| AR-518 | Chan Sieh Enterprises Co, Ltd. | AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters. | |
| AROLON® 845-W-45 | Polynt Composites | AROLON® 845-W-45, in the form of an opaque, white liquid, is a thermoplastic styrene acrylic emulsion designed for air-dry topcoats and primers, as well as coatings for metal and plastics. This product dries quickly, with good gasoline, chemical, solvent,...view more AROLON® 845-W-45, in the form of an opaque, white liquid, is a thermoplastic styrene acrylic emulsion designed for air-dry topcoats and primers, as well as coatings for metal and plastics. This product dries quickly, with good gasoline, chemical, solvent, corrosion, and water or humidity resistance. view less | |
| AROLON® 847-W-42 | Polynt Composites | AROLON® 847-W-42, in the form of a milky white, styrenated acrylic emulsion, is a resin that can be used in air-dry, force dry enamels, and baking topcoats for metals and plastics, primers, industrial maintenance direct-to-metal-coatings, and concrete cur...view more AROLON® 847-W-42, in the form of a milky white, styrenated acrylic emulsion, is a resin that can be used in air-dry, force dry enamels, and baking topcoats for metals and plastics, primers, industrial maintenance direct-to-metal-coatings, and concrete cures and sealers. This product offers water-sport resistance, chemical resistance, and good adhesion to concrete and metal. It can also offer good corrosion resistance with inhibitive pigment stability. view less | |
| AROLON® 860-W-45 | Polynt Composites | AROLON® 860-W-45, in the form of an opaque, white liquid, is an acrylic copolymer emulsion designed for primer and topcoat use on concrete and sealers, air-dry, force-dry, or baking primers for plastics and metals, and topcoats for plastics and metals. Th...view more AROLON® 860-W-45, in the form of an opaque, white liquid, is an acrylic copolymer emulsion designed for primer and topcoat use on concrete and sealers, air-dry, force-dry, or baking primers for plastics and metals, and topcoats for plastics and metals. This product is resistant to gasoline, chemicals, solvents, and stains after it has been cross-linked. view less | |
| AROPLAZ® 6749-XA6-90 | Polynt Composites | AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture a...view more AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture and equipment. view less | |
| B-Cat 0019 | FTC Korea Co.,Ltd | B-Cat 0019 has high temperature application and excellent humidity and detergent resistance. It is suitable for use in coil coatings, metal decorating, general industrial coating, electrostatic sprays, and electro coatings. | Request Sample |
| B-Cat 0023 | FTC Korea Co.,Ltd | B-Cat 0023 has high temperature application and excellent humidity and detergent resistance. It is suitable for use in coil coatings, metal decorating, general industrial coatings, electrostatic sprays, and electro coatings. | Request Sample |
| BASONAT® HB 275 B | BASF Dispersions & Resins | BASONAT HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical prop...view more BASONAT HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical properties, and non-yellowing. BASONAT HB 275 B is used to formulate lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or plastics. view less | |
| BECKOSOL® 1272 | Polynt Composites | BECKOSOL® 1272 is a 100% solids, long-oil, soy alkyd that can be used in house paints (both conventional, as well as stain- and blister-resistant types), trim paints, structural steel primers, and lithographic or letterpress printing inks. It can also be ...view more BECKOSOL® 1272 is a 100% solids, long-oil, soy alkyd that can be used in house paints (both conventional, as well as stain- and blister-resistant types), trim paints, structural steel primers, and lithographic or letterpress printing inks. It can also be used as a modifier for exterior house paints. This product has good wetting properties and displays zinc oxide stability. It can readily be emulsified into latex paint formulations. view less | |
| BECKOSOL® 3758-M-85 | Polynt Composites | BECKOSOL® 3758-M-85, in the form of a clear liquid, is a phenolic-modified drying oil that can be used in direct production of coating vehicles without cooking, such as clear exterior finishes, aluminum paints, metal primers, coatings, and floor paints. I...view more BECKOSOL® 3758-M-85, in the form of a clear liquid, is a phenolic-modified drying oil that can be used in direct production of coating vehicles without cooking, such as clear exterior finishes, aluminum paints, metal primers, coatings, and floor paints. It can also be used to modify alkyd resins. If one mixes this product in a cold blend with resins, the end product will create an exterior coating system with high durability and chemical resistance. view less | |
| BECKOSOL® 6422-K3-75 | Polynt Composites | BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construct...view more BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construction equipment finishes, among other uses. This product dries tack-free in two hours and provides good color and color retention. It has strong water-spot, humidity, and salt spray resistance and will retain gloss in exterior exposures. view less | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...view more BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. view less | |
| Benester 742 | Benasedo | Benester 742 is a slightly branched saturated polyester having a very good adhesion on aluminium and galvanized steel. Good balance between flexibility and surface hardness, colour and exterior resistance. | |
| Bluepur 3037 | S.A.P.I.C.I. SpA | Bluepur 3037 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used in the formulation of metal or plastic coatings, especially for 1K or 2K waterborne system...view more Bluepur 3037 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used in the formulation of metal or plastic coatings, especially for 1K or 2K waterborne systems. view less | |
| Bluepur 3080 | S.A.P.I.C.I. SpA | Bluepur 3080 is a waterborne polyurethane dispersion. This product can be used as a coalescing agent with polyurethane dispersions or acrylic emulsions. It can be used in the formulation of metal and plastic coatings, especially for the formulation of 1...view more Bluepur 3080 is a waterborne polyurethane dispersion. This product can be used as a coalescing agent with polyurethane dispersions or acrylic emulsions. It can be used in the formulation of metal and plastic coatings, especially for the formulation of 1K or 2K waterborne systems. view less | |
| BYD-1318 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...view more BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. view less | |
| BYD2640 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0...view more BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...view more BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. view less | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...view more CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. view less | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...view more CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. view less | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...view more CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. view less | |
| CH-4900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...view more CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. view less | |
| CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...view more CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. view less | |
| CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...view more CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. view less | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...view more CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. view less | |
| CHS-Alkyd AL 3220 | Spolchemie | CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to...view more CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to be around 32%. CHS-Alkyd AL 3220 is primarily used for non-yellowing coatings for wood and metal surfaces. view less | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....view more CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. view less | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...view more CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. view less | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...view more CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. view less | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...view more CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. view less | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...view more CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. view less | |
| CHS-Alkyd S 618 W 80 | Spolchemie | CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood...view more CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood and metal paints that are intended for being applied on exterior surfaces. view less | |
| CHS-Alkyd S 621 W 60 | Spolchemie | CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in w...view more CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. view less | |
| CHS-Alkyd S 622 W 55 | Spolchemie | CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in w...view more CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. view less | |
| CHS-Alkyd S 652 NN 70 | Spolchemie | CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash poi...view more CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 652 NN 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. view less | |
| CHS-Alkyd S 653 W 70 | Spolchemie | CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily use...view more CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. view less | |
| CHS-Alkyd S 670 NN 75 | Spolchemie | CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash p...view more CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 670 NN 75 is primarily used for air-drying wood and metal coatings for interior and exterior use. view less | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....view more CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. view less | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...view more CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. view less | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...view more CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. view less | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...view more CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. view less | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...view more CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. view less | |
| CHS-Epoxy 160 V 55 | Spolchemie | CHS-Epoxy 160 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a VOC free water dispersed epoxy resin system that is medium in its molecular weight. The primary use for CHS-Epoxy 160 V 55 is to be applied ...view more CHS-Epoxy 160 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a VOC free water dispersed epoxy resin system that is medium in its molecular weight. The primary use for CHS-Epoxy 160 V 55 is to be applied as a varnish and a binder of paints for wood, concrete and metal surfaces in combination with curing agent Telalit 1040. view less | |
| CHS-Epoxy 200 V 55 | Spolchemie | CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to ...view more CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to be applied as a varnish and a binder of paints for wood, concrete and metal surfaces in combination with curing agent Telalit 180. view less | |
| CHS-Epoxy 210 X 75 | Spolchemie | CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance t...view more CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance two components coating materials such as anti-corrosion primers, baking coating, paints for heating oil tanks, penetrates of concrete, treatment of wood and metal surfaces. view less | |
| CHS-Epoxy 222 IX 60 | Spolchemie | CHS-Epoxy 222 IX 60 is a Gardner colored solution of a modified low molecular weight epoxy resin. This low molecular weighted epoxy resin has an epoxide equivalent weight of 430-555 g/mol. CHS-Epoxy 222 is modified by soy bean oil and fatty acids. It come...view more CHS-Epoxy 222 IX 60 is a Gardner colored solution of a modified low molecular weight epoxy resin. This low molecular weighted epoxy resin has an epoxide equivalent weight of 430-555 g/mol. CHS-Epoxy 222 is modified by soy bean oil and fatty acids. It comes from a solution that is 60% in a blend of solvents including isobutanol and xylene. This product is primarily used for producing anticorrosion paints for marine, railway, gas industries. This product can also be used for wood floor toppings and different metal surfaces exclusively intended for interior use. view less | |
| CHS-Hydrospol D 01 | Spolchemie | CHS-Hydrospol D 01 is a milky or cream colored resin with low viscosity. This product is a binder for solvent free waterborne coatings and is made up of 45% water. It is VOC free and a urethane dispersal of linseed oil alkyd resin. CHS-Hydrospol D 01 is p...view more CHS-Hydrospol D 01 is a milky or cream colored resin with low viscosity. This product is a binder for solvent free waterborne coatings and is made up of 45% water. It is VOC free and a urethane dispersal of linseed oil alkyd resin. CHS-Hydrospol D 01 is primarily used for several different types of water-soluble air-drying coating s for interior and exterior. This product is as a steel anticorrosion primer for metals and stain for woods. view less | |
| CHS-Hydrospol D 101 | Spolchemie | CHS-Hydrospol D 101 is a milky colored binder for waterborne low yellowing solvent free coatings. This product is 45% water VOC free urethane dispersion alkyd resin that is made from soybean oil. It does not have any organic solvents. The oil length for t...view more CHS-Hydrospol D 101 is a milky colored binder for waterborne low yellowing solvent free coatings. This product is 45% water VOC free urethane dispersion alkyd resin that is made from soybean oil. It does not have any organic solvents. The oil length for this product is estimated to be around 27%. CHS-Hydrospol D 101 is primarily used for waterborne air-drying coatings for interior and exterior uses. This product is used on metal and wood surfaces. view less | |
| CHS-Hydrospol D 401 | Spolchemie | CHS-Hydrospol D 401 is a binder with improved flexibility for waterborne low yellowing solvent free coatings. This product is made up of 45% water; it is VOC free and a urethane dispersal of soybean oil. It is free of any organic solvents. CHS-Hydrospol D...view more CHS-Hydrospol D 401 is a binder with improved flexibility for waterborne low yellowing solvent free coatings. This product is made up of 45% water; it is VOC free and a urethane dispersal of soybean oil. It is free of any organic solvents. CHS-Hydrospol D 401 is primarily used for coatings on interiors and exteriors and is intended to coat metal and wood surfaces. view less | |
| Cinergi™ 2018 A | Lawter | Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensure...view more Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensures the finished ink keeps desired properties while countering tarnishing. Its flexibility allows Cinergi™ 2018 A to be adaptable to a variety of metallic applications including sheet-fed inks. view less | |
| CN104A60 | Sartomer Americas | CN104A60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's ...view more CN104A60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphenol A based epoxy acrylates. Performance properties for CN104A60 include good adhesion, good chemical resistance, good hardness, good water resistance and high abrasion resistance. Suggested applications include are adhesives, coatings, electronics, inks and sealants. view less | |
| CN294E | Sartomer Americas | CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment...view more CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment wetting. CN294E is used in UV curable coatings and inks including metal, paper, and plastic coatings and flexographic, screen, and lithographic inks. view less | |
| CN299 | Sartomer Americas | CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including me...view more CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including metal, plastic, and paper coatings as well as flexographic, screen, and lithographic inks. This product also has good chemical resistance, good heat resistance, high abrasion resistance and good adhesion. view less | |
| CN821 | Sartomer Americas | CN821 is a unique acrylic oligomer that will enhance adhesion to non-porous substrates. The oligomer is very low in color, allowing it to be used on white and light colored substrates. It is hydrophobic and has low odor, good water resistance, high impact...view more CN821 is a unique acrylic oligomer that will enhance adhesion to non-porous substrates. The oligomer is very low in color, allowing it to be used on white and light colored substrates. It is hydrophobic and has low odor, good water resistance, high impact strength, and is solvent resistance. Some suggested applications of CN821 are laminating adhesives, streolithography, metal and plastic coatings, and flexo, screen, inkjet, and rotary screen inks. view less | |
| CN9013 | Sartomer Americas | CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkag...view more CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkage, and high hardness. CN9013's suggested applications are for wood, plastic, metal, floor, and other abrasion resistant coatings. view less | |
| CN9024 | Sartomer Americas | CN9024 is a clear liquid, aliphatic urethane acrylate that will yield flexible films with high modulus upon free radical polymerization. This product generally has good adhesion to polymer and metal substrates due to its low shrinkage and favorable viscoe...view more CN9024 is a clear liquid, aliphatic urethane acrylate that will yield flexible films with high modulus upon free radical polymerization. This product generally has good adhesion to polymer and metal substrates due to its low shrinkage and favorable viscoelastic properties. CN9024 has utility in a number of different applications including laminating and pressure sensitive adhesives, metal, plastic, and wood coatings, as well as flexo, litho, offset, screen, rotary screen, and letterpress inks. view less | |
| CN9025 | Sartomer Americas | CN9025 is a highly functional aliphatic urethane acrylate designed for use in hard coats or where additional cross linking is necessary. The oligomer does not contain PETA, making it a desirable choice for applications where that particular monomer cannot...view more CN9025 is a highly functional aliphatic urethane acrylate designed for use in hard coats or where additional cross linking is necessary. The oligomer does not contain PETA, making it a desirable choice for applications where that particular monomer cannot be used. CN9025 has high hardness and scratch resistance. It also has good water resistance, solvent resistance, and high impact strength. It is used for glass, metal, and plastic coatings as well as flexo, litho, rotary screen, and inkjet inks. view less | |
| Coronate® 2030 | Tosoh Corporation | Coronate® 2030 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. | |
| Coronate® 2031 | Tosoh Corporation | Coronate® 2031 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. | |
| Coronate® 2050 | Tosoh Corporation | Coronate® 2050 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. | |
| Coronate® 2067 | Tosoh Corporation | Coronate® 2067, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it c...view more Coronate® 2067, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it can be applied in a wide range of coating fields, such as rubbers, metals, plastics, concrete, leather, and paper. view less | |
| Coronate® 2071 | Tosoh Corporation | Coronate® 2071 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. | |
| Coronate® 2074 | Tosoh Corporation | Coronate® 2074 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. | |
| Coronate® 2096 | Tosoh Corporation | Coronate® 2096 is a non-yellowing polyisocyanate containing HDI isocyanurate rings and modified with multifunctional alcohols. This product is ideal for use in coatings for rubber, metal, plastic, concrete, leather, and paper applications. | |
| Coronate® 2232 | Tosoh Corporation | Coronate® 2232 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. | |
| Coronate® 2233 | Tosoh Corporation | Coronate® 2233 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. | |
| Coronate® 2255 | Tosoh Corporation | Coronate® 2255 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. | |
| Coronate® 2257 | Tosoh Corporation | Coronate® 2257 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. |
