| BYD-1016 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an ...view more BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. view less | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...view more CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. view less | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...view more CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. view less | |
| CH-4900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...view more CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. view less | |
| CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...view more CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. view less | |
| CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...view more CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. view less | |
| CN9025 | Sartomer Americas | CN9025 is a highly functional aliphatic urethane acrylate designed for use in hard coats or where additional cross linking is necessary. The oligomer does not contain PETA, making it a desirable choice for applications where that particular monomer cannot...view more CN9025 is a highly functional aliphatic urethane acrylate designed for use in hard coats or where additional cross linking is necessary. The oligomer does not contain PETA, making it a desirable choice for applications where that particular monomer cannot be used. CN9025 has high hardness and scratch resistance. It also has good water resistance, solvent resistance, and high impact strength. It is used for glass, metal, and plastic coatings as well as flexo, litho, rotary screen, and inkjet inks. view less | |
| DOUBLEMER® 272 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 272 is a carboxylated polyester acrylate oligomer. It is specially designed for use in metal and glass, and may be cured by ultraviolet light (UV) or electron beam (EB). This grade is characterized by light color, acid functionality, low viscos...view more DOUBLEMER® 272 is a carboxylated polyester acrylate oligomer. It is specially designed for use in metal and glass, and may be cured by ultraviolet light (UV) or electron beam (EB). This grade is characterized by light color, acid functionality, low viscosity and good elongation at high temperature after curing. Formulated UV/EB curable products containing DOUBLEMER® 272 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommended for use in: etch resist varnishes and metal and glass adhesion promoter. view less | |
| DOUBLEMER® 413P | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 413P is a cycloaliphatic epoxide oligomer that is characterized by its high curing speed, low viscosity, and cycloaliphatic epoxide oligomer, which undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator. Thi...view more DOUBLEMER® 413P is a cycloaliphatic epoxide oligomer that is characterized by its high curing speed, low viscosity, and cycloaliphatic epoxide oligomer, which undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator. This generates a cationic catalyst. Onium salt photoinitiators are used to produce the cationic species on exposure to UV light, while remaining stable in the absence of UV light. Formulations containing DOUBLEMER® 413P, along with other epoxide resins and polyol modifiers can provide a range of cured film properties. Coatings containing DOUBLEMER® 413P generally have excellent toughness, solvent resistance, and good adhesion to a variety of substrates, including metals and plastics. view less | |
| DOUBLEMER® 4250 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 4250 is characterized by its high curing speed, low viscosity, cycloaliphatic epoxide oligomer that undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator, which generates a cationic catalyst. Onium salt pho...view more DOUBLEMER® 4250 is characterized by its high curing speed, low viscosity, cycloaliphatic epoxide oligomer that undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator, which generates a cationic catalyst. Onium salt photoinitiators are used to produce the cationic species on exposure to UV light, while remaining stable in the absence of UV light. This product is a yellowish viscous liquid. Formulations containing DOUBLEMER® 4250, along with other epoxide resins and polyol modifiers, can provide a range of cured film properties. Coating containing DOUBLEMER® 4250 generally have excellent toughness, solvent resistance, and good adhesion to a variety of substrates, including metals and plastics. This product can be used for metal coatings, overprint varnishes, plastic coatings, PET film and keypad coating. view less | |
| DOUBLEMER® 4500 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 4500 is a high molecular weight polymer epoxy, which has a backbone of acrylate with glycidyl epoxide. It is designed for increasing the curing speed and viscosity. This white to off-white powder is odorless and is characterized by its light co...view more DOUBLEMER® 4500 is a high molecular weight polymer epoxy, which has a backbone of acrylate with glycidyl epoxide. It is designed for increasing the curing speed and viscosity. This white to off-white powder is odorless and is characterized by its light color and low skin and eye irritation potential. UV cured coatings formulated with DOUBLEMER® 4500 can be used for: metal coatings, overprint varnishes, plastic coatings, PET coatings, keypad coating, wood coating and glass coating. view less | |
| DOUBLEMER® 4500D40 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 4500D40 is a backbone of aliphatic acrylate with glycidyl epoxide diluted with 40% 2-(2-ethoxyethoxy) ethyl acetate. This clear liquid is characterized by light color, low odor and low skin and eye irritation potential. UV cured coatings formul...view more DOUBLEMER® 4500D40 is a backbone of aliphatic acrylate with glycidyl epoxide diluted with 40% 2-(2-ethoxyethoxy) ethyl acetate. This clear liquid is characterized by light color, low odor and low skin and eye irritation potential. UV cured coatings formulated with DOUBLEMER® 4500D40 can be used for: metal coatings, overprint varnishes, plastic coatings, PET film, keypad coating, wood coating and glass coating. view less | |
| Epokukdo KSR-177 | Kukdo Chemical Co., Ltd. | Epokukdo KSR-177 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as glass, metals, and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poo...view more Epokukdo KSR-177 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as glass, metals, and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poor adhesion. KSR-177 follows the trends of lightweight using light materials. view less | |
| GENOMER* 1121M | Rahn USA Corp. | GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coa...view more GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coatings on glass; adhesives; and polymerization and copolymerization in emulsions and solutions. view less | Request Sample |
| HS9555 | Tianyi Chemical Engineering Material Co., Ltd. | HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof...view more HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof and plates easily. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. view less | |
| HS9732 | Tianyi Chemical Engineering Material Co., Ltd. | HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provi...view more HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provides a good balance between water and inks. view less | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...view more IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. view less | |
| nolax S22.2202 | nolax AG (Vanora) | nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well...view more nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well as technical textiles. Adheres on one side to metals and polyolefinic substrates (PE, EVA, EPDM), and on the other side to painted sheet material, glass, PC, PVC, PU, ABS, PA, and more. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2202 has a melting point of 100 to 130°C, relative density of ~1.0 g/cm³, is insoluble in water, and not readily biodegradable. view less | |
| PSA-1170 | NuSil Silicone Technology 1 | PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is...view more PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is supplied in flammable solvents so it needs to be handled cautiously. Allow solvent to evaporate before adhering or attaching adhesive-coated objects together. view less | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...view more R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. view less | |
| RAYLOK™ C1102 | Allnex | RAYLOK™ C1102 is a styrene free urethane acrylate based resin providing high glass transition temperature combined with good flexibility upon curing. This resin is specially developed for making glass fibre composites which are to be cured by Ultraviolet ...view more RAYLOK™ C1102 is a styrene free urethane acrylate based resin providing high glass transition temperature combined with good flexibility upon curing. This resin is specially developed for making glass fibre composites which are to be cured by Ultraviolet (UV) light. view less | Request Sample |
| Rhenogran® Resorcin-80 | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber ...view more Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. view less | |
| Rhenogran® Resorcin-80 SBR | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber t...view more Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 SBR finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. view less | |
| Rovene® 6018 | Mallard Creek Polymers, Inc. | Rovene® 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives. It provides excellent wet and dry adhesion to inorganic surfaces such as glass and cera...view more Rovene® 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives. It provides excellent wet and dry adhesion to inorganic surfaces such as glass and ceramics along with outstanding filler loading capacity for economical mastic adhesive formulations. view less | |
| SiSiB® PC5210 | SiSiB SILICONES | SiSiB® PC5210 is a colorless clear liquid. It is a group of reactive, chlorine-containing silicon compounds, used in many chemical processes. It reacts with water to produce hydrogen chloride. It can be used as coatings for silicon and glass surfaces or...view more SiSiB® PC5210 is a colorless clear liquid. It is a group of reactive, chlorine-containing silicon compounds, used in many chemical processes. It reacts with water to produce hydrogen chloride. It can be used as coatings for silicon and glass surfaces or in the production of silicone (polysiloxane) polymers. view less | |
| SiSiB® PC5310 | SiSiB SILICONES | SiSiB® PC5310 is a clear, colourless, caustic and highly flammable liquid with a pungent odour. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used as coatings for silicon and glass surfaces,...view more SiSiB® PC5310 is a clear, colourless, caustic and highly flammable liquid with a pungent odour. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used as coatings for silicon and glass surfaces, or in the production of silicone (polysiloxane) polymers. view less | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...view more SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. view less | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...view more SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. view less | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...view more SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. view less | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...view more SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. view less | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...view more SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. view less | |
| UVEKOL® A | Allnex | Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass...view more Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass: flat and slightly bent, tempered, coated, and other types. view less | Request Sample |
| UVEKOL® FR-C | Allnex | Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass la...view more Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass lamination process using Uvekol® FR-C is simple and does not require heating or pressure. view less | Request Sample |
| UVEKOL® S | Allnex | UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass...view more UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass: flat and bent, tempered, coated and other types of glass. view less | Request Sample |
| VISIOMER® HEMA-P 100 | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct-to-metal coatings, VISIOMER® HEMA-P100 enhances corrosion ...view more VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct-to-metal coatings, VISIOMER® HEMA-P100 enhances corrosion resistance and improves film strength. It can be used e.g. as a functional co-monomer in acrylic emulsion for coating resins, as a reactive co-diluent in composite resins, or as an adhesion promoter in adhesive formulations. view less | |
| VISIOMER® HEMA-P 70M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® HEMA-P 70M is a monofunctional methacrylate with a phosphate group in the side chain. Supplied in 30% methyl methacrylate, it is easy to handle due to its low viscosity. VISIOMER® HEMA-P 70M enables superior adhesion to polar surfaces like metal...view more VISIOMER® HEMA-P 70M is a monofunctional methacrylate with a phosphate group in the side chain. Supplied in 30% methyl methacrylate, it is easy to handle due to its low viscosity. VISIOMER® HEMA-P 70M enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct to metal coatings, it enhances corrosion resistance and improves film strength. VISIOMER® HEMA-P 70M can be used e.g. as a functional co-monomer in acrylic emulsions for coating resins or as an adhesion promoter in adhesive formulations. view less | |
| XHG-9169 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless ...view more XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless adhesion, it can be applied to most non-porous siliceous material such as glass, tiles, ceramics, enamel and glazed tiles as well as impregnated, varnished or painted wood and some plastics. view less | |
| XHG-9179 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. A...view more XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As an adhesion, it can be applied to glass such as windows, glazed surfaces, ceramic tiles, and many plastics and paints. view less |
