| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...view more ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. view less | |
| AFCONA - 5008 | AFCONA Additives Sdn Bhd | AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and or...view more AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and organically treated bentonites while decreasing pigment sedimentation. AFCONA – 5008 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| AFCONA - 5030 | AFCONA Additives Sdn Bhd | AFCONA – 5030 is a polymer of carboxylic acid and polyamide and an alkyl benzene and PMA solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces by reducing interf...view more AFCONA – 5030 is a polymer of carboxylic acid and polyamide and an alkyl benzene and PMA solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces by reducing interfacial tension between pigments or extenders and the vehicle, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5030 is widely compatible in systems from no polarity to high polarity, finding application in artificial leather, and in polyurethane, alkyd, and polyamide systems for printing inks. view less | |
| AFCONA - 5044 | AFCONA Additives Sdn Bhd | AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfa...view more AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing interfacial tension between pigments or extenders and the vehicle, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5044 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| AFCONA - 5065 | AFCONA Additives Sdn Bhd | AFCONA – 5065 is a high molecular weight unsaturated carboxylic acid combined with a compatible and organically modified polysiloxane. This transparent yellow to brown liquid is in an alkyl benzene and diisobutylketone solvent and functions as a wetting a...view more AFCONA – 5065 is a high molecular weight unsaturated carboxylic acid combined with a compatible and organically modified polysiloxane. This transparent yellow to brown liquid is in an alkyl benzene and diisobutylketone solvent and functions as a wetting and dispersing additive to prevent the flooding and floating of pigments. AFCONA – 5065 is recommended for systems with medium to high polarity, finding application in polyurethane, UPE, ultraviolet, and NC systems, and in baking paints, acid curing, and printing inks. view less | |
| AFCONA - 5244 | AFCONA Additives Sdn Bhd | AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the ...view more AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the interfacial tension between pigments or extenders and the vehicle. AFCONA – 5244 stabilizes pigments through electrical charge repulsion forces, finding application in epoxies and polyurethane primers, UPE applications such as gel coats, buttons, SMC, and BMC, and in P VC systems. view less | |
| ALKOX® CP-B1 | Kowa American Corporation | ALKOX® CP-B1 is a copolymer of ethylene oxide, phenyl glycidylether, and propylene oxide. It offers good dispersing properties in aqueous solution, and can also be used as a viscosity increasing additive or anti-settling additive. The viscosity of aqueous...view more ALKOX® CP-B1 is a copolymer of ethylene oxide, phenyl glycidylether, and propylene oxide. It offers good dispersing properties in aqueous solution, and can also be used as a viscosity increasing additive or anti-settling additive. The viscosity of aqueous solution (10% wt) is 200~1,500 mPa·s. view less | Request Sample |
| ALKOX® CP-B2 | Kowa American Corporation | ALKOX® CP-B2 is a copolymer of ethylene oxide, phenyl glycidylether, and propylene oxide. It offers good dispersing properties in aqueous solution, and can also be used as a viscosity increasing additive or anti-settling additive. The viscosity of aqueous...view more ALKOX® CP-B2 is a copolymer of ethylene oxide, phenyl glycidylether, and propylene oxide. It offers good dispersing properties in aqueous solution, and can also be used as a viscosity increasing additive or anti-settling additive. The viscosity of aqueous solution (10% wt) is 300~2,000 mPa·s. view less | Request Sample |
| ANTI-TERRA®-U 100 | BYK | ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERR...view more ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERRA-U 100 is effective for wetting and dispersing colored pigments, both organic and inorganic. No adverse effect has been observed on the pot-life of two-component systems or on the dry time of oxidative cure binders. ANTI-TERRA-U 100 can also be used as a wetting and suspending additive in water soluble coatings. view less | Request Sample |
| Busperse® 2144 | Buckman Laboratories, Inc. | Busperse® 2144 is a proprietary, acrylate-based dispersant for use in water-based coatings, slurries, adhesives, and similarly formulated products. It has been found to be a noncorrosive, extremely effective anionic dispersant. This product is a clear, pa...view more Busperse® 2144 is a proprietary, acrylate-based dispersant for use in water-based coatings, slurries, adhesives, and similarly formulated products. It has been found to be a noncorrosive, extremely effective anionic dispersant. This product is a clear, pale-yellow liquid with an ammoniacal odor. view less | |
| DISPERBYK®-2012 | BYK | DISPERBYK-2012 is suitable for resin and resin-free grinds. The additive is compatible with a wide range of water-soluble resins, emulsions and dispersions. This high molecular weight additive deflocculates pigments through steric stabilization of the pig...view more DISPERBYK-2012 is suitable for resin and resin-free grinds. The additive is compatible with a wide range of water-soluble resins, emulsions and dispersions. This high molecular weight additive deflocculates pigments through steric stabilization of the pigment. Therefore, color strength, transparency, gloss and storage stability of the pigment concentrates are improved. view less | Request Sample |
| DISPERBYK-2014 | BYK | DISPERBYK-2014 is a 100% solvent-free wetting and dispersing additive for solvent-borne, solvent-free, aqueous and UV coatings, as well as for aqueous printing inks and inkjet inks. | Request Sample |
| DISPERBYK®-2096 | BYK | DISPERBYK®-2096 is a wetting and dispersing additive for the improvement of colorant acceptance. It is a formulation of polarity acidic esters and high molecular weight alcohols. This product is a processing additive to improve colorant acceptance of univ...view more DISPERBYK®-2096 is a wetting and dispersing additive for the improvement of colorant acceptance. It is a formulation of polarity acidic esters and high molecular weight alcohols. This product is a processing additive to improve colorant acceptance of universal pigment concentrates in nonpolar coating systems. It is also recommended as a wetting and dispersing additive for non-polar paint systems. view less | Request Sample |
| DISPERBYK®-2150 | BYK | DISPERBYK®-2150 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is displays exce...view more DISPERBYK®-2150 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is displays excellent compatibility with all common paint binders. DISPERBYK®-2150 leads to a very strong mill base viscosity reduction. This makes a higher pigment content in pigment concentrates possible. view less | Request Sample |
| DISPERBYK-2150 TF | BYK | DISPERBYK-2150 TF is a wetting and dispersing additive for solvent-borne coating systems and resin-containing pigment concentrates with broad compatibility. Particularly compatible with thermoplastic acrylics (TPA) and cellulose nitrate. | Request Sample |
| DISPERBYK-2151 TF | BYK | DISPERBYK-2151 TF is a tin-free hyperbranched wetting and dispersing additive for solvent-borne and solvent-free epoxy systems and other reactive systems. | Request Sample |
| DISPERBYK-2152 TF | BYK | DISPERBYK-2152 TF is a tin-and Emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy and other reactive systems; conforms to the German AgBB. | Request Sample |
| DISPERBYK-2155 TF | BYK | DISPERBYK-2155 TF is a VOC- and solvent-free wetting and dispersing additive for solvent-borne and solvent-free coating systems, floor coatings, and printing inks. Particularly recommended for the manufacture of pigment concentrates with broad compatibili...view more DISPERBYK-2155 TF is a VOC- and solvent-free wetting and dispersing additive for solvent-borne and solvent-free coating systems, floor coatings, and printing inks. Particularly recommended for the manufacture of pigment concentrates with broad compatibility. The 100 % active substance makes it particularly suitable for high-solid and solvent-free systems. DISPERBYK-2155 TF is the tin-free variant of DISPERBYK-2155. view less | Request Sample |
| DISPERBYK-2163 TF | BYK | DISPERBYK-2163 TF is a wetting and dispersing additive for solvent-borne coatings and pigment concentrates. DISPERBYK-2163 TF is the aromatic- and tin-free version of DISPERBYK-2163. | Request Sample |
| Dispersogen® FSE | Clariant - Coatings & Construction Chemicals | Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE ...view more Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE is often used for inorganic pigments in combination with fatty amines like Genamin® CC 100 or Genamin® TA 100. Dispersogen® FSE offers a balanced viscosity to minimize sedimentation and at the same time enables dosing, pumping and feeding. A slightly alkaline pH of 7.5 - 8.5, adjusted by alkali like caustic soda, reduces the viscosity. view less | |
| Dispersogen® LFH | Clariant - Coatings & Construction Chemicals | Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It...view more Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® UDN | Clariant - Coatings & Construction Chemicals | Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with hi...view more Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with high solid contents. Dispersogen® UDN is used in emulsion paints to improve compatibility of pigments and minerals with polymers and binders and to enhance the tinting strength of organic pigments. view less | |
| ECOPOLCOAT CCR 052-F | Ecopol Tech | ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, wit...view more ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with approximately 85% biobased content. Tailored for stamping processes, it demonstrates thermal resistance, hardness, low friction and durability. This versatile polymer also provides antiadhesive properties, preventing unwanted material adhesion during stamping. view less | |
| EDAPLAN® 397 | Munzing Chemie | EDAPLAN® 397 is a liquid brown blend of special polyglycol esters, biodegradables and non-ionics. It is a non-ionic, liquid dispersing agent that is commonly used in pigments, as well as binder-free and binder containing grinds and pigment concentrates. | |
| EFKA® FA 4642 | BASF Formulation Additives | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...view more EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. view less | |
| EFKA® FA 4663 | BASF Formulation Additives | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...view more EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. view less | |
| Genapol® ED 3060 | Clariant - Coatings & Construction Chemicals | Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of orga...view more Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of organic pigments like phthalocyanine blue or red and yellow azo pigments. view less | |
| LOPON® 826 | ICL Phosphate Specialty | LOPON® 826 is a dispersing and wetting agent for emulsion silicate paints and silicate systems. It is an alkali phosphate and surfactant in aqueous solution. LOPON® 826 disperses pigments and fillers to achieve high solid contents within silicate systems....view more LOPON® 826 is a dispersing and wetting agent for emulsion silicate paints and silicate systems. It is an alkali phosphate and surfactant in aqueous solution. LOPON® 826 disperses pigments and fillers to achieve high solid contents within silicate systems. The application within emulsion silicate paints improves the rheological properties and the long time storage stability. The product is strongly alkaline and reacts with acids exothermically. view less | Request Sample |
| LOPON® DA 200 | ICL Phosphate Specialty | LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mi...view more LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 200 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® DA 201 | ICL Phosphate Specialty | LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will ...view more LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 201 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® DA 400 | ICL Phosphate Specialty | LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and...view more LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 400 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® DA 401 | ICL Phosphate Specialty | LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence wi...view more LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 401 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® DA 402 | ICL Phosphate Specialty | LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, a...view more LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 402 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® PA | ICL Phosphate Specialty | LOPON® PA is a dispersing agent for emulsion paints, emulsion silicate paints, emulsion based varnishes and pigment pastes. This yellowish viscouse liquid is a polycarboxylic acid and amino derivative in aqueous solution. It has a synergy effect to polyph...view more LOPON® PA is a dispersing agent for emulsion paints, emulsion silicate paints, emulsion based varnishes and pigment pastes. This yellowish viscouse liquid is a polycarboxylic acid and amino derivative in aqueous solution. It has a synergy effect to polyphosphates like CALGON® N for obtaining washing and scrubbing resistant emulsion paints. The usual dosage of LOPON® PA is between 0.2 – 1.0 %, calculated on solid content. view less | Request Sample |
| LUBA-print 280/F | Munzing Chemie | LUBA-print 280/F is a white hydrocarbon combination wax dispersion additive for paints and printing inks. It is used in water-based lacquers and coating systems to improve slip behavior and hydrophoby. | |
| LUBA-print 459 | Munzing Chemie | LUBA-print 459 is a white paraffine combination wax dispersion additive for paints and printing inks. It is used in solvent-based lacquers to improve hydrophoby and anti-blocking. | |
| LUBA-print 459/H-2 | Munzing Chemie | LUBA-print 459/H-2 is a white paraffin combination wax dispersion additive for paints and printing inks. It can be used in waterproofing of surfaces, to improve the depth of colour from marbling effects and smoothing technique (stucco). | |
| NUOSPERSE® 2000 | Elementis | NUOSPERSE® 2000 is a waterborne liquid carrier/humectant for use in VOC- compliant colorants and pigment dispersions. | Request Sample |
| PAT-ADD DA 707 | Patcham USA | PAT-ADD DA 707 is an amphoteric dispersing agent for use in solventborne paints, inks, plasticizers and colorants. PAT-ADD DA 707 is multifunctional and compatible with a wide range of solventborne paint systems. However, PAT-ADD DA 707 is particularly ef...view more PAT-ADD DA 707 is an amphoteric dispersing agent for use in solventborne paints, inks, plasticizers and colorants. PAT-ADD DA 707 is multifunctional and compatible with a wide range of solventborne paint systems. However, PAT-ADD DA 707 is particularly effective as dispersant for inorganic pigments in air-drying alkyd paints. Main benefits are: optimizes the milling process, enabling higher pigment loading, provides excellent color development, strong prevention of pigment flocculation, floating, flooding, and pigment settling; excellent compatibility with alkyd resins, minimal risks of undesirable side effects, and minimal effect on heat stability in plasticized PVC systems. view less | Request Sample |
| PAT-ADD DA 831 | Patcham USA | PAT-ADD DA 831 is a blend of anionic and nonionic surface active compounds to provide anti-settling and anti-sag properties. The use of PAT-ADD DA 831 is particularly suited for heavy pigments such as red lead, barites, iron oxides, etc. as these pigments...view more PAT-ADD DA 831 is a blend of anionic and nonionic surface active compounds to provide anti-settling and anti-sag properties. The use of PAT-ADD DA 831 is particularly suited for heavy pigments such as red lead, barites, iron oxides, etc. as these pigments quickly form a hard deposit which often cannot be brought back into suspension. Because of its high surface activity, PAT-ADD DA 831 keeps these pigments in suspension. If slight sedimentation takes place, the soft settling can be easily stirred back into suspension. view less | Request Sample |
| TEGO® Dispers 650 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 650 is a wetting and dispersing additive. It is a yellowish to brownish liquid modified polyether with groups of high pigment affinity. TEGO® Dispers 650 is used for the manufacture of universal colorants and for organic pigments and carbon ...view more TEGO® Dispers 650 is a wetting and dispersing additive. It is a yellowish to brownish liquid modified polyether with groups of high pigment affinity. TEGO® Dispers 650 is used for the manufacture of universal colorants and for organic pigments and carbon blacks. It has a very good development of color strength and is solvent- and APE-free. This product can also be used for even lower viscosity but slightly weaker color strength. view less | Request Sample |
| TEGO® Dispers 651 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 651 is a pigment-wetting and dispersing additive. It is a yellowish to brownish liquid modified polyether with groups of high pigment affinity. TEGO® Dispers 651 has very good reduction of viscosity and is solvent- and APE-free. It is used f...view more TEGO® Dispers 651 is a pigment-wetting and dispersing additive. It is a yellowish to brownish liquid modified polyether with groups of high pigment affinity. TEGO® Dispers 651 has very good reduction of viscosity and is solvent- and APE-free. It is used for the manufacture of universal colorants, for inorganic and organic pigments and also for architectural paints. view less | Request Sample |
| TEGO® Dispers 671 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 671 is a polymeric wetting and dispersing additive for solventborne formulations. Provides high color strength, especially with organic pigments. Dispersions of carbon black pigments show a low viscosity and a blueish undertone. | Request Sample |
| TEGO® Dispers 740 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 740 W is a pigment-wetting and dispersing additive. It is a non-ionic, modified fatty acid derivative; aromatic-, amine- and alkylphenolethoxylate-free, yellowish, clear to slightly hazy liquid. Based on sustainable raw materials, TEGO® Disp...view more TEGO® Dispers 740 W is a pigment-wetting and dispersing additive. It is a non-ionic, modified fatty acid derivative; aromatic-, amine- and alkylphenolethoxylate-free, yellowish, clear to slightly hazy liquid. Based on sustainable raw materials, TEGO® Dispers 740 W wets and stabilizes organic and carbon black pigments in pigment concentrates. It also improves colorant acceptance when used in the millbase of emulsion paints. For inorganic pigment concentrates, the addition of rheology modifiers such as fumed silica has proven to be beneficial when formulating this product. view less | Request Sample |
| TEGO® Dispers 760 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 760 W is a wetting and dispersing additive with outstanding pigment wetting properties and viscosity reduction of the grind. It is solvent-free, clear to slightly hazy liquid waterborne solution of surface active substances and polymers with...view more TEGO® Dispers 760 W is a wetting and dispersing additive with outstanding pigment wetting properties and viscosity reduction of the grind. It is solvent-free, clear to slightly hazy liquid waterborne solution of surface active substances and polymers with groups of high pigment affinity. TEGO® Dispers 760 W offers optimum wetting of organic and carbon black pigments in binder-containing dispersions. It reduces viscosity and increases color strength. view less | Request Sample |
| TEGO® Dispers 761 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 761 W is a pigment-wetting and dispersing additive that offers optimum wetting of organic and carbon black pigments in binder-containing dispersions. It also reduces viscosity and increases color strength. | Request Sample |
| TEGO® Dispers 765 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 765 W is a wetting and dispersing additive for waterborne printing inks. In binder-free millbases, it shows good wetting and stabilization properties with organic pigments. | Request Sample |
| TEGO® Dispers 780 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 780 W is a polymeric, slightly anionic wetting and dispersing additive for high-quality waterborne ink formulations. It is an excellent choice for resin-containing, resin-reduced as well as resin-free grinds. TEGO® Dispers 780 W provides exc...view more TEGO® Dispers 780 W is a polymeric, slightly anionic wetting and dispersing additive for high-quality waterborne ink formulations. It is an excellent choice for resin-containing, resin-reduced as well as resin-free grinds. TEGO® Dispers 780 W provides excellent pigment stabilization for organic and inorganic pigments. view less | Request Sample |
| ULTRAWET® 230 | Indorama Ventures | ULTRAWET® 230 is comprised of a mixture of Alkylphenol Polyglycol Ether and Polyethylene glycol in a water solution. This product acts as a dispersant in paints and pigments, moisturizer, emulsifier and stabilizer, avoiding the occurrence of flotation and...view more ULTRAWET® 230 is comprised of a mixture of Alkylphenol Polyglycol Ether and Polyethylene glycol in a water solution. This product acts as a dispersant in paints and pigments, moisturizer, emulsifier and stabilizer, avoiding the occurrence of flotation and bleeding of pigments in water-based systems, and as an emulsifier for emulsion polymerization in a PVA system. Its main advantage is chemical stability in a broad pH range, temperature and compatibility with anionic and cationic surfactant agents. view less |
