UL Prospector
Prospector

Success!

Successfully saved your search
58 Results
ADDAPT® Ester 20DA ADDAPT Chemicals BV ADDAPT® Ester 20DA is a synthetic ester used as a solvent-free pigment dispersing agent for solvent based systems. It is recommended for dispersing carbon black in milling paste and alkyd paint.
ADDITOL® XL 6514/80 Allnex Additol® XL 6514/80 is a wetting and dispersing agent for solvent born and solvent free paint systems. Request Sample
ADDITOL® XL 6521 Allnex Additol® XL 6521 is a high molecular wetting and dispersing agent with cationic character for carbon black and organic pigments. Request Sample
Busperse® 2180 Buckman Laboratories, Inc. Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The...view more Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The product is generally nonionic at neutral to alkaline pH and slightly cationic at acidic pH. Busperse® 2180 disperses in aqueous systems with good agitation. It is not soluble in petroleum distillates, such as mineral spirits, toluene, xylene, aromatic 150, or VM&P naptha. The product is soluble in solvent systems that contain oxygenated solvents, such as glycols, glycol ethers, ketones, and acetates. view less
Busperse® 229 Buckman Laboratories, Inc. Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better we...view more Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better wetting of the substrate by the binder, reducing moisture permeability of the paint film. This product should be added with water prior to the addition of wetting agents and pigments. The pigment slurry should be dispersed at high speed, cooled and let down with the water-reducible alkyd binder. view less
Busperse® 275 Buckman Laboratories, Inc. Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 17...view more Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 173.310 of the U.S. Food and Drug Administration regulations. This product is a yellow-orange liquid, and it may be used in coatings at levels between 0.3% and 1.0%, based on total weight of the formulation. view less
Busperse® 282 Buckman Laboratories, Inc. Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...view more Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. view less
Busperse® 284 Buckman Laboratories, Inc. Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...view more Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. view less
Busperse® 47 Buckman Laboratories, Inc. Busperse® 47 is a 100% solids, zero VOC, nonionic dispersing aid, wetting aid and viscosity depressant that is compatible with a wide range of vehicles. Busperse® 47 has shown the ability to aid in dispersing difficult-to-grind pigments, such as organic r...view more Busperse® 47 is a 100% solids, zero VOC, nonionic dispersing aid, wetting aid and viscosity depressant that is compatible with a wide range of vehicles. Busperse® 47 has shown the ability to aid in dispersing difficult-to-grind pigments, such as organic reds, yellows, and oranges as well as various black pigments. The nonionic nature of Busperse® 47 makes it compatible in a wide range of coatings vehicles allowing for ease of formulation. This product can be dispersed directly into a variety of solvent-based polymers, such as conventional- and high-solids alkyds, polyesters, two-component epoxies, and urethanes. Busperse® 47 is soluble in many organic solvents, both polar and non polar. It should be added directly to the grind prior to the addition of the most difficult to grind pigment. view less
BYK®-9077 BYK BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mil...view more BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mill-base. BYK-9077 is especially suited for stabilizing basic carbon black pigments. The product does not contain plasticizers. view less Request Sample
BYK®-SYNERGIST 2100 BYK BYK®-SYNERGIST 2100 is an insoluble pigment complex. This product is an additive in powder form. It produces in combination with polymeric wetting and dispersing additives small particle sizes by deflocculation of pigments and thus: increase gloss, improv...view more BYK®-SYNERGIST 2100 is an insoluble pigment complex. This product is an additive in powder form. It produces in combination with polymeric wetting and dispersing additives small particle sizes by deflocculation of pigments and thus: increase gloss, improve color strength, reduce viscosity of the pigment concentrate, depending on pigment type and treatment of the pigment surface. This way, higher pigment content in the pigment concentrate is possible. view less Request Sample
Carbowet® GA-211 Surfactant Evonik Operations GmbH, BL Coating Additives Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...view more Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. view less Request Sample
Carbowet® GA-221 Surfactant Evonik Operations GmbH, BL Coating Additives Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment w...view more Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions. view less Request Sample
DISPERBYK®-2163 BYK DISPERBYK®-2163 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product can replace DISP...view more DISPERBYK®-2163 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product can replace DISPERBYK® 163. view less Request Sample
DISPERBYK®-2164 BYK DISPERBYK®-2164 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product should preferabl...view more DISPERBYK®-2164 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product should preferably be used in new formulations due to its high solids content and to its aromatic-free solvents. The additive can replace DISPERBYK®-164 and DISPERBYK® 167. view less Request Sample
Dispersogen® FA Clariant - Coatings & Construction Chemicals Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment pr...view more Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment preparations and point of sale colorants. view less
DISPEX® Ultra FA 4416 BASF Formulation Additives DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...view more DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. view less
DISPEX® Ultra PX 4275 BASF Formulation Additives DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...view more DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. view less
E-SPERSE 100 Ethox Chemicals E-SPERSE 100 is an excellent dispersant that will lower the viscosity of many water-based pigment dispersions produced from dry pigment or presscake.
E-SPERSE 130 Ethox Chemicals E-SPERSE 130 is a dispersant that stabilizes and compatibilizes pigment/polymer/plasticizer non-aqueous systems.
E-SPERSE 131 Ethox Chemicals E-Sperse 131 significantly improves the distribution of additives, inorganic, and organic pigment into polyester and polyolefins.
E-SPERSE 132 Ethox Chemicals E-SPERSE 132 is a dispersant for aqueous systems.
E-SPERSE 315 Ethox Chemicals E-SPERSE 315 is a dispersant for aqueous systems.
E-SPERSE 321 Ethox Chemicals E-SPERSE 321 is a dispersant for aqueous systems.
E-SPERSE 322 Ethox Chemicals E-SPERSE 322 is a dispersant for aqueous systems.
E-SPERSE 323 Ethox Chemicals E-Sperse 323 enhances and maintains lower viscosity in purely aqueous pigment dispersions.
E-SPERSE 325 Ethox Chemicals E-SPERSE 325 is a dispersant for aqueous systems.
E-SPERSE 326 Ethox Chemicals E-SPERSE 326 is a dispersant for aqueous systems.
E-SPERSE 327 Ethox Chemicals E-SPERSE 327 is a dispersant for aqueous systems.
E-SPERSE 328 Ethox Chemicals E-SPERSE 328 is an excellent dispersant that will lower the viscosity of many water-based pigment dispersions produced from dry pigments or presscake.
E-SPERSE 330 Ethox Chemicals E-SPERSE 330 is a dispersant for aqueous systems.
E-SPERSE 337 Ethox Chemicals E-SPERSE 337 is a dispersant that is used for aqueous systems.
E-SPERSE 344 Ethox Chemicals E-SPERSE 344 is a dispersant for aqueous systems.
E-SPERSE 345 Ethox Chemicals E-SPERSE 345 is a dispersant for aqueous systems.
E-SPERSE 346 Ethox Chemicals E-SPERSE 346 is a dispersant for aqueous systems.
E-SPERSE 506 Ethox Chemicals E-SPERSE 506 is a novel dispersant that shows dramatic viscosity improvement characteristics in water-based systems. This allows for higher pigment loadings and increased dispersion stability. Marked reduction of pseudoplastic behavior andminimization of ...view more E-SPERSE 506 is a novel dispersant that shows dramatic viscosity improvement characteristics in water-based systems. This allows for higher pigment loadings and increased dispersion stability. Marked reduction of pseudoplastic behavior andminimization of viscosity increases upon aging are not able features of E-SPERSE 506. view less
FLO-THENE UF1.5N Sumitomo Seika America, Inc. FLO-THENE UF1.5N is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF1.5N retains the excellent properties of polyethylene as it contains no add...view more FLO-THENE UF1.5N is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF1.5N retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. view less Request Sample
FLO-THENE UF20S Sumitomo Seika America, Inc. FLO-THENE UF20S is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF20S retains the excellent properties of polyethylene as it contains no addit...view more FLO-THENE UF20S is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF20S retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. view less Request Sample
FLO-THENE UF4 Sumitomo Seika America, Inc. FLO-THENE UF4 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF4 retains the excellent properties of polyethylene as it contains no additives...view more FLO-THENE UF4 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF4 retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. view less Request Sample
FLO-THENE UF80 Sumitomo Seika America, Inc. FLO-THENE UF80 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF80 retains the excellent properties of polyethylene as it contains no additiv...view more FLO-THENE UF80 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF80 retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. view less Request Sample
Graph'Up W3 CARBON WATERS Graph'Up W3 is a ready-to-use additive boosting anti-corrosion, UV resistance, anti-scratch, and anti-clogging performance of waterbased formulations.
LOPON® DA 200 ICL Phosphate Specialty LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mi...view more LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 200 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less Request Sample
LOPON® DA 201 ICL Phosphate Specialty LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will ...view more LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 201 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less Request Sample
LOPON® DA 400 ICL Phosphate Specialty LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and...view more LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 400 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less Request Sample
LOPON® DA 401 ICL Phosphate Specialty LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence wi...view more LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 401 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less Request Sample
LOPON® DA 402 ICL Phosphate Specialty LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, a...view more LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 402 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less Request Sample
LOPON® P ICL Phosphate Specialty LOPON® P is a dispersing agent for facade coatings and pigment slurries. The clear yellowish liquid is composed of phosphonates and amino derivative in aqueous solution. LOPON® P offers following advantages: excellent water softening properties, excellent...view more LOPON® P is a dispersing agent for facade coatings and pigment slurries. The clear yellowish liquid is composed of phosphonates and amino derivative in aqueous solution. LOPON® P offers following advantages: excellent water softening properties, excellent lime binding efficiency, excellent pigment wetting charateristics for inorganic pigments, and excellent colour stabilisation for shaded paints systems. view less Request Sample
LOPON® PL ICL Phosphate Specialty LOPON® PL is a dispersing agent for color systems. It has high pigment-wetting properties, stable color intensity, equal pigment distribution, and enables storage stability. Request Sample
OMBRELUB 533 Munzing Chemie OMBRELUB 533 is a white, turbid nonionic liquid, very finely dispersed and stable dispersion of calcium stearate in water. It is easily miscible with water at all ratios. The calcium stearate is an excellent water-repellent agent. In waterborne printing i...view more OMBRELUB 533 is a white, turbid nonionic liquid, very finely dispersed and stable dispersion of calcium stearate in water. It is easily miscible with water at all ratios. The calcium stearate is an excellent water-repellent agent. In waterborne printing inks and external wood coatings OMBRELUB 533 is applied to increase waterproofing properties. OMBRELUB 533 is also recommended for the manufacture of concrete building components. view less
PanSPERSE 900 Pan Technology Inc. PanSPERSE 900 is an environmentally friendly aqueous dispersing agent effective with most organic and inorganic pigments. It is solvent free and contains no alkylphenolethoxylates. Colorants made with PanSPERSE 900 are compatible with most waterborne coat...view more PanSPERSE 900 is an environmentally friendly aqueous dispersing agent effective with most organic and inorganic pigments. It is solvent free and contains no alkylphenolethoxylates. Colorants made with PanSPERSE 900 are compatible with most waterborne coatings and inks. PanSPERSE 900 is intended for use in making highly concentrated pigment dispersions for coloring conventional, low and zero VOC aqueous coatings and inks. Dispersions made with PanSPERSE 900 have exceptionally wide compatibility and can be used in both ambient cured and baking finishes. It can also be used to correct problems of floating and flocculation in finished coatings and inks. view less
TEGO® Dispers 690 Evonik Operations GmbH, BL Coating Additives TEGO® Dispers 690 is a high molecular weight polymer used as a pigment wetting and dispersing additive. It is designed specifically for solventborne printing inks used in food packaging. By using this product in solventborne, PU-containing or binder-free ...view more TEGO® Dispers 690 is a high molecular weight polymer used as a pigment wetting and dispersing additive. It is designed specifically for solventborne printing inks used in food packaging. By using this product in solventborne, PU-containing or binder-free pigment dispersions, high pigment loadings can be achieved due to strong viscosity reduction. TEGO® Dispers 690 is highly compatible with various PU and NC binder types and works well with organic pigments, carbon blacks and titanium dioxide. It is also especially effective in gravure and flexo inks for lamination applications. view less Request Sample
TEGO® Dispers 691 Evonik Operations GmbH, BL Coating Additives TEGO® Dispers 691 is a highly efficient polymeric wetting and dispersing additive for solventborne formulations. It gives outstanding wetting and stabilization to both organic and inorganic pigments in solventborne printing inks. Request Sample
Troysperse™ 90W Arxada – Troy Corporation Troysperse™ 90W is a liquid dispersing and wetting additive for the dispersion of carbon black and organic pigments in aqueous Industrial Coatings and Prinking Ink applications. Troysperse™ 90W is recommended for applications where waste effluent is contr...view more Troysperse™ 90W is a liquid dispersing and wetting additive for the dispersion of carbon black and organic pigments in aqueous Industrial Coatings and Prinking Ink applications. Troysperse™ 90W is recommended for applications where waste effluent is controlled to insure no product release to water. view less Request Sample
Troysperse™ W Arxada – Troy Corporation Troysperse™ W is a pigment dispersant and wetting agent for aqueous systems. Troysperse™ W promotes liquid amphoteric wetting and dispersing aid for dispersion of all types of pigments in waterborne coatings, color concentrates and printing inks. Request Sample
ZetaSperse® 2500 Pigment Dispersing Additive Evonik Operations GmbH, BL Coating Additives ZetaSperse® 2500 is designed to wet, disperse, and stabilize a variety of organic pigment chemistries, with exceptional performance on metal salt red types. ZetaSperse® 2500 offers an optimized combination of wetting and stabilization mechanisms for aqueo...view more ZetaSperse® 2500 is designed to wet, disperse, and stabilize a variety of organic pigment chemistries, with exceptional performance on metal salt red types. ZetaSperse® 2500 offers an optimized combination of wetting and stabilization mechanisms for aqueous systems. ZetaSperse® 2500 advantages include stable viscosities over long-term/heat aging, increased color development, robust color, and dispersion stability in letdown with shock resistance. ZetaSperse® 2500 is free from APEs, solvents glycols, and HAPS. view less Request Sample
ZetaSperse® 3100 Pigment Dispersing Additive Evonik Operations GmbH, BL Coating Additives ZetaSperse® 3100 is designed to wet, disperse, and stabilize a range of pigment and filler chemistries, with exceptional performance for carbon black dispersions. It is suitable for aqueous pigment dispersions. ZetaSperse® 3100 is based on polymeric dispe...view more ZetaSperse® 3100 is designed to wet, disperse, and stabilize a range of pigment and filler chemistries, with exceptional performance for carbon black dispersions. It is suitable for aqueous pigment dispersions. ZetaSperse® 3100 is based on polymeric dispersant technology with characteristics that enable strong interactions with a variety of pigment surface chemistries. ZetaSperse® 3100 advantages include robust color and dispersion stability in letdown, improved dispersion rheology and increased color development. ZetaSperse® 3100 is free from APEs, solvents, glycols and HAPS. view less Request Sample
ZetaSperse® 3700 Pigment Dispersing Additive Evonik Operations GmbH, BL Coating Additives ZetaSperse® 3700 is designed to wet, disperse, and stabilize high-performance and problematic organic pigments. ZetaSperse® 3700 is based on a new polymeric dispersant tailored to maximize affinity to specific pigment surface chemistries. ZetaSperse® 3700...view more ZetaSperse® 3700 is designed to wet, disperse, and stabilize high-performance and problematic organic pigments. ZetaSperse® 3700 is based on a new polymeric dispersant tailored to maximize affinity to specific pigment surface chemistries. ZetaSperse® 3700 advantages include improved dispersion rheology, increased color development, robust color and dispersion stability in letdown. It is free from APEs, solvents, glycols, and HAPS. ZetaSperse® 3700 additive is suitable for aqueous pigment dispersions. view less Request Sample
ZetaSperse® 3800 Dispersant Evonik Operations GmbH, BL Coating Additives ZetaSperse® 3800 dispersant is formulated to provide strong stabilization of pigments, fillers, and other solids in aqueous dispersion. Based on a moderate molecular weight comb polymer, ZetaSperse® 3800 dispersant offers robust steric stabilization suit...view more ZetaSperse® 3800 dispersant is formulated to provide strong stabilization of pigments, fillers, and other solids in aqueous dispersion. Based on a moderate molecular weight comb polymer, ZetaSperse® 3800 dispersant offers robust steric stabilization suitable for a wide range of formulation characteristics. view less Request Sample