| B-TOUGH A1, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A1 is recommended for use in liquid type epoxy systems (lowest polarity grade). | |
| B-TOUGH A2, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A2 is recommended for use in liquid and/or solid type epoxy systems (low polarity grade). | |
| B-TOUGH A3, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A3 is recommended for use in solid type epoxy formulations (medium polarity grade). | |
| Brij™ C2 | Croda Coatings & Polymers | Brij™ C2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ C2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ C20 | Croda Coatings & Polymers | Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ L23 | Croda Coatings & Polymers | Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ L4 | Croda Coatings & Polymers | Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ O10 | Croda Coatings & Polymers | Brij™ O10 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ O10 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ O2 | Croda Coatings & Polymers | Brij™ O2 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ O2 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ O20 | Croda Coatings & Polymers | Brij™ O20 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ O20 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S10 | Croda Coatings & Polymers | Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S100 | Croda Coatings & Polymers | Brij™ S100 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ S100 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S2 | Croda Coatings & Polymers | Brij™ S2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ S2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S20 | Croda Coatings & Polymers | Brij™ S20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ S20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S721 | Croda Coatings & Polymers | Brij™ S721 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ S721 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| CRODACOR BE | Croda Coatings & Polymers | Water-soluble corrosion inhibitor compatible in a wide range of formulations, particularly aqueous based formulations contained within tin plated steel aerosol cans. | |
| Crodafos™ T6A | Croda Coatings & Polymers | Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also ...view more Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also functions as a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. view less | |
| Crodamide S | Croda Coatings & Polymers | Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pre...view more Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures. This product is used to prevent adhesive granulates from sticking together during storage at moderate and low temperatures. Crodamide S also prevents adhesive film layers to attract dirt or stick together before application by reactivation or melting. It can be incorporated directly into polymers to prevent any unwanted adhesion. The amide migrates fast to the surface of the material on cooling to form a non-sticking ‘release’ layer. It may be used in conjunction with organic additives such as talc to enhance performance. view less | |
| Hypermer A70 | Croda Coatings & Polymers | Hypermer A70 is a polymeric O/W emulsifier and dispersant in non polar liquids for superior colloidal stability and minimum impact on coating properties. | |
| LoVOCoat Form 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Form 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in Exxsol D80. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
| LoVOCoat Stable 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Stable 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in water. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
| Maxemul 5010 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Maxemul 5010 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and e...view more Maxemul 5010 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 5011 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Maxemul 5011 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and e...view more Maxemul 5011 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 6106 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and el...view more Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 6112 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Maxemul 6112 - Copolymerizable Anionic Surfactant is a non-migratory, anionic surfactant for superior emulsion stability in latex systems and excellent moisture resistance or adhesive properties in coatings or psa's. | |
| Maxemul™ 7000 Series | Croda Coatings & Polymers | Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory dir...view more Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory directives will dramatically change the coatings market in the coming years and solvent-borne resins could disappear. One use of these polymeric non-migratory or reactive emulsifiers is to produce zero VOC resin emulsions to overcome these regulatory issues. view less | |
| Maxemul™ 7201 | Croda Coatings & Polymers | Maxemul™ 7201 is an anionic surfactant, oil soluble, resin compatible, pigment wetter and dispersant for aqueous and non-aqueous dispersions, resin emulsifier, and compatibiliser. It has improved cycle time and excellent stability, covering a wide range o...view more Maxemul™ 7201 is an anionic surfactant, oil soluble, resin compatible, pigment wetter and dispersant for aqueous and non-aqueous dispersions, resin emulsifier, and compatibiliser. It has improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. This product is used for industrial coatings and decorative coatings and paints. view less | |
| Maxemul™ 8201 | Croda Coatings & Polymers | Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has impro...view more Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. view less | |
| Maxemul™ 9107 – A Versatile Emulsifier for VOC Free Epoxy Emulsions | Croda Coatings & Polymers | Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film ...view more Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film properties. Its versatility makes it suitable for floor coatings, wall paints and direct-to-metal applications. view less | |
| Multiwet™ BD - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ BD - Multifunctional wetting agent is a non-silicone and non-fluorinated multifunctional surfactant. Multiwet BD offers excellent wetting of clean, unprepared or low energy substrates and is best in class for biodegradability. | |
| Multiwet™ EF - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ EF - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet EF offers excellent wetting with a very low critical micelle concentration and is the best in class for efficiency. | |
| Multiwet™ Multifunctional Wetting Agents Sample Kit | Croda Coatings & Polymers | Multiwet™ Multifunctional Wetting Agents Sample Kit offers a range of functionalities to suit any aqueous formulation. The kit contains 5 Multiwet products. | |
| Multiwet™ SO - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SO - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SO offers excellent wetting with a low VOC content and is best in class at solids wetting. | |
| Multiwet™ SU - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SU - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SU offers excellent wetting especially of clean and low energy substrates and is best in class for substrate wetting. | |
| Multiwet™ VE - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ VE - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet VE offers excellent wetting of clean, unprepared and low energy surfaces and is best in class for versatility. | |
| Myrj™ S100 | Croda Coatings & Polymers | Myrj™ S100 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applica...view more Myrj™ S100 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. view less | |
| Myrj™ S40 | Croda Coatings & Polymers | Myrj™ S40 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applicat...view more Myrj™ S40 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. view less | |
| Myrj™ S8 | Croda Coatings & Polymers | Myrj™ S8 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applicati...view more Myrj™ S8 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. view less | |
| Priamine™ 1073 | Croda Coatings & Polymers | Priamine™ 1073 is for high end polyamide applications, for which it offers the highest purity and di-functionality. | |
| Priamine™ 1074 | Croda Coatings & Polymers | Priamine™ 1074 is for high end polyamide applications, for which it offers the highest purity and di-functionality. | |
| Priamine™ 1075 | Croda Coatings & Polymers | Priamine™ 1075 is for high molecular weight polyamides for high-end applications. This dimer diamine grade has a high purity, high difunctionality and low color. | |
| Priplast™ 1838 Polyester Diol | Croda Coatings & Polymers | Priplast™ 1838 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substra...view more Priplast™ 1838 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substrates, like plastics. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 1839 Polyester Diol | Croda Coatings & Polymers | Priplast™ 1839 Polyester Diol is a polyester diol with an acid value of 1. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, an...view more Priplast™ 1839 Polyester Diol is a polyester diol with an acid value of 1. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 2101 | Croda Coatings & Polymers | Priplast™ 2101 is an epoxy toughened resin that brings flexibility. It's a dimer acid traditionally used in epoxy resins. | |
| Priplast™ 2102 | Croda Coatings & Polymers | Priplast™ 2102 is an epoxy toughened resin that enhances hydrophobicity, weatherability and compatibility with organic matrices (tar etc.). It's a dimer acid traditionally used in epoxy resins. | |
| Priplast™ 2103 | Croda Coatings & Polymers | Priplast™ 2103 is an epoxy toughened resin and adhesive. It's a dimer acid traditionally used in epoxy resins. | |
| Priplast™ 2104 | Croda Coatings & Polymers | Priplast™ 2104 is an epoxy toughened resin made from natural raw materials. It's a dimer acid traditionally used in epoxy resins. | |
| Priplast™ 3162 Polyester Diol | Croda Coatings & Polymers | Priplast™ 3162 Polyester Diol provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. | |
| Priplast™ 3172 Polyester Diol | Croda Coatings & Polymers | Priplast™ 3172 Polyester Diol is a polyester diol with a hydroxyl value range of 35 to 41. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins...view more Priplast™ 3172 Polyester Diol is a polyester diol with a hydroxyl value range of 35 to 41. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3186 Polyester Polyol | Croda Coatings & Polymers | Priplast™ 3186 Polyester Polyol is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. It provides resistance to hydrolytic attack, alkal...view more Priplast™ 3186 Polyester Polyol is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3187 | Croda Coatings & Polymers | Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent w...view more Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent water resistance, hydrolytic stability, and good flow and wetting properties. This product is used for adhesives & sealants and elastomers applications. view less | |
| Priplast™ 3190 | Croda Coatings & Polymers | Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali ...view more Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3192 | Croda Coatings & Polymers | Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidati...view more Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3196 Polyester Diol | Croda Coatings & Polymers | Priplast™ 3196 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatability for polymer blends. It has possible use in s...view more Priplast™ 3196 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatability for polymer blends. It has possible use in soft touch applications. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3198 Polyester Polyol | Croda Coatings & Polymers | Priplast™ 3198 Polyester Polyol is a low MW, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols and excellent hydrophobicity. It provides resistance t...view more Priplast™ 3198 Polyester Polyol is a low MW, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols and excellent hydrophobicity. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3286 | Croda Coatings & Polymers | Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow an...view more Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow and wetting properties. This product is used for adhesives & sealants, foams, and industrial coating applications. view less | |
| Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) | Croda Coatings & Polymers | Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative ...view more Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Pripol 1006 Dimer Acid Hydrogenated | Croda Coatings & Polymers | Pripol 1006 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and exc...view more Pripol 1006 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. view less | |
| Pripol™ 1006 F | Croda Coatings & Polymers | Pripol™ 1006 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester, and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wettin...view more Pripol™ 1006 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester, and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, industrial coatings, and composite applications. Pripol™ 1006 F also is approved for food contact applications. view less | |
| Pripol 1009 Dimer Acid Hydrogenated | Croda Coatings & Polymers | Pripol 1009 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. It provides water repellency,...view more Pripol 1009 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. It provides water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. view less | |
| Pripol™ 1010 | Croda Coatings & Polymers | Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, im...view more Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, advanced ceramics, and industrial coating applications. view less | |
| Pripol™ 1010 F | Croda Coatings & Polymers | Pripol™ 1010 F is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, ...view more Pripol™ 1010 F is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, industrial coatings, and composite applications. Pripol™ 1010 F also is approved for food contact applications. view less | |
| Pripol™ 1013 | Croda Coatings & Polymers | Pripol™ 1013 is a high purity dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysi...view more Pripol™ 1013 is a high purity dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Pripol™ 1017 | Croda Coatings & Polymers | Pripol™ 1017 is a dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysis and chemic...view more Pripol™ 1017 is a dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Pripol™ 1025 | Croda Coatings & Polymers | Pripol™ 1025 is a hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. As a resin modifier, it provides good color, water repellency, improved flexibility, thermo-oxidative stability, good flow an...view more Pripol™ 1025 is a hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. As a resin modifier, it provides good color, water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Pripol™ 1025 F | Croda Coatings & Polymers | Pripol™ 1025 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides water repellency, flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chem...view more Pripol™ 1025 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides water repellency, flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chemical resistance. This product also features good flow and wetting properties and is approved for food contact applications. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Pripol™ 1027 | Croda Coatings & Polymers | Pripol™ 1027 is a low color grade, dimer acid building block for epoxy, polyurethane, as well as polyester and polyamide coatings and adhesives. It is used for resin modification that brings extreme water repellency, improved flexibility, excellent hydrol...view more Pripol™ 1027 is a low color grade, dimer acid building block for epoxy, polyurethane, as well as polyester and polyamide coatings and adhesives. It is used for resin modification that brings extreme water repellency, improved flexibility, excellent hydrolysis and chemical resistance, hydrolytic stability, as well as good flow and wetting properties. view less | |
| Pripol 2033 Dimerdiol | Croda Coatings & Polymers | Pripol 2033 Dimerdiol is a dimer diol building block with high difunctionality for polyurethane and polyester coatings, adhesives and elastomers. It provides good colour, water repellency, flexibility, thermo-oxidative stability and outstanding hydrolysis...view more Pripol 2033 Dimerdiol is a dimer diol building block with high difunctionality for polyurethane and polyester coatings, adhesives and elastomers. It provides good colour, water repellency, flexibility, thermo-oxidative stability and outstanding hydrolysis / chemical resistance. view less | |
| Pycal® 94 | Croda Coatings & Polymers | Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thi...view more Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thickening agents. view less | |
| Span™ 20 | Croda Coatings & Polymers | Span™ 20 is a W/O emulsifier, O/W co-emulsifier, pigment dispersant, and carrier liquid. It has particle morphology control in S-PVC. As a highly efficient emulsifier, it has improved cycle time and excellent stability, covering a wide range of HLB values...view more Span™ 20 is a W/O emulsifier, O/W co-emulsifier, pigment dispersant, and carrier liquid. It has particle morphology control in S-PVC. As a highly efficient emulsifier, it has improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It also is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. view less | |
| Span™ 40 | Croda Coatings & Polymers | Span™ 40 is a W/O emulsifier and O/W co-emulsifier, pigment dispersant and carrier liquid. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Span™ 60 | Croda Coatings & Polymers | Span™ 60 is a W/O emulsifier and O/W co-emulsifier, pigment dispersant in non-polar liquids. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Span™ 85 | Croda Coatings & Polymers | Span™ 85 is an easy to handle W/O emulsifier and dispersing agent for a-polar liquids. It is a primary emulsifier for inverse emulsion polymerisation with improved cycle time and excellent stability, covering a wide range of HLB values to match your formu...view more Span™ 85 is an easy to handle W/O emulsifier and dispersing agent for a-polar liquids. It is a primary emulsifier for inverse emulsion polymerisation with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. view less | |
| Synperonic™ 13/12 | Croda Coatings & Polymers | Synperonic™ 13/12 is a nonionic surfactant with good pigment wetting and emulsifying properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Synperonic™ 13/6 | Croda Coatings & Polymers | Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional...view more Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. view less | |
| Synperonic™ T/1301 | Croda Coatings & Polymers | Synperonic™ T/1301 is an effective defoamer as well as a polyether polyol building block with enhanced reactivity. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle t...view more Synperonic™ T/1301 is an effective defoamer as well as a polyether polyol building block with enhanced reactivity. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. view less | |
| Synperonic™ T/908 | Croda Coatings & Polymers | Synperonic™ T/908 is an excellent cross-linker for hydrophilic PU systems. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a ...view more Synperonic™ T/908 is an excellent cross-linker for hydrophilic PU systems. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. view less | |
| Tween™ 21 | Croda Coatings & Polymers | Tween™ 21 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent sta...view more Tween™ 21 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. view less | |
| Tween™ 40 | Croda Coatings & Polymers | Tween™ 40 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent sta...view more Tween™ 40 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. view less | |
| Zephrym™ 3300-B | Croda Coatings & Polymers | Zephrym™ 3300-B is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. This product is well...view more Zephrym™ 3300-B is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. This product is well suited for both organic and inorganic pigments and fillers. view less | |
| Zephrym™ ColorFX Carbon Black Pigment Dispersant | Croda Coatings & Polymers | Zephrym™ ColorFX Carbon Black Pigment Dispersant is a novel amine functional dispersant for high performance pigments, such as carbon black, in solvent borne formulations. Zephrym™ ColorFX offers enhanced color development - no synergist needed -, signifi...view more Zephrym™ ColorFX Carbon Black Pigment Dispersant is a novel amine functional dispersant for high performance pigments, such as carbon black, in solvent borne formulations. Zephrym™ ColorFX offers enhanced color development - no synergist needed -, significantly lowers usage levels, lower viscosity and improved stability. view less | |
| Zephrym™ PD 2206 | Croda Coatings & Polymers | Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced di...view more Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced dispersion of particles in low polarity solvent and resin systems. This product is well suited for both organic and inorganic pigments and fillers, as well as carbon black. It is FDA indirect food contact approved and provides excellent performance in liquid color for plastics. view less | |
| Zephrym™ PD 2234 | Croda Coatings & Polymers | Zephrym™ PD 2234 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improv...view more Zephrym™ PD 2234 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improved dispersion viscosity, longer storage capability, and superior color development in low polarity non-aqueous systems. It is particularly well suited for both organic and inorganic pigments. view less | |
| Zephrym™ PD 2246 | Croda Coatings & Polymers | Zephrym™ PD 2246 is a solid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improve...view more Zephrym™ PD 2246 is a solid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improved dispersion of particles in low polarity non-aqueous systems. It is well suited for both organic and inorganic pigments and fillers, as well as carbon black. This product has very good high temperature and high shear stability. view less | |
| Zephrym™ PD 3315 | Croda Coatings & Polymers | Zephrym™ PD 3315 is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It is capable of wi...view more Zephrym™ PD 3315 is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It is capable of withstanding high ion concentrations. view less | |
| Zephrym™ PD 4913 | Croda Coatings & Polymers | Zephrym™ PD 4913 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has superior di...view more Zephrym™ PD 4913 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has superior dispersion capabilities for organic pigments, as well as inorganic pigments and fillers in aqueous environments. It produces high quality dispersions using untreated pigments. view less | |
| Zephrym™ PD 4974 Iron Oxide Pigment Dispersant | Croda Coatings & Polymers | Zephrym™ PD 4974 Iron Oxide Pigment Dispersant is a low VOC polymeric dispersant specifically designed for iron oxide pigments. It dramatically improves stability, enhances color development and reduces the need for thickeners. | |
| Zephrym™ PD 7000 | Croda Coatings & Polymers | Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dis...view more Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dispersion of carbon black, inorganic pigments and fillers, and for use in electronics and adhesives applications. view less |
