| 3M™ Ceramic Microspheres W-210 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M c...view more 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-210 are typically chosen over other 3M ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-410 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler load...view more 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-410 are typically chosen over other 3M ceramic microspheres for their overall balance in properties. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-610 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic m...view more 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-610 are typically chosen over other 3M ceramic microspheres for increased durability. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Fluorosurfactant FC-4430 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4430 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product can provide stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4432 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4432 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4434 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4434 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Glass Bubbles iM16K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles iM30K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K1 | 3M Advanced Materials Division | 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K15 | 3M Advanced Materials Division | 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K20 | 3M Advanced Materials Division | 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K25 | 3M Advanced Materials Division | 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K37 | 3M Advanced Materials Division | 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K42HS | 3M Advanced Materials Division | 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K46 | 3M Advanced Materials Division | 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S15 | 3M Advanced Materials Division | 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S22 | 3M Advanced Materials Division | 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S28HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S32 | 3M Advanced Materials Division | 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S35 | 3M Advanced Materials Division | 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38 | 3M Advanced Materials Division | 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush streng...view more 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S42XHS | 3M Advanced Materials Division | 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60 | 3M Advanced Materials Division | 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles XLD3000 | 3M Advanced Materials Division | 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...view more 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-250 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product pe...view more 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-250 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-250 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-270 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The ...view more 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-270 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-270 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-450 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the...view more 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-450 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-450 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-451 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates th...view more 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-451 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-451 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive SRC-220 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product...view more 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRC-220 offers durability, long-lasting performance and UV resistance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRC-220 is easy to incorporate into existing water and some solvent-based products and can be added to existing formulations or diluted with water or water miscible solvents and used as a stand-alone sealer. view less | |
| BARAGEL® 3000 | Elementis | BARAGEL® 3000 rheological additive is a self activating organoclay grease gellant for thickening medium- to high-viscosity-index mineral oils, synthetic oils and other organic fluids. It is easy to disperse and suitable for lubricating greases based on me...view more BARAGEL® 3000 rheological additive is a self activating organoclay grease gellant for thickening medium- to high-viscosity-index mineral oils, synthetic oils and other organic fluids. It is easy to disperse and suitable for lubricating greases based on medium- to high- VI paraffinic oils, synthetic oils and other organic fluids. Many of these greases are used in mining, farming, metal refining and military applications. view less | Request Sample |
| BENAQUA® 4000 | Elementis | BENAQUA® 4000 is an easily dispersible powder designed for lower-gloss and matt latex paints, textured and high-build coatings and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use. | Request Sample |
| BENGEL® 958 | Elementis | BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufactu...view more BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufacturing procedures. view less | Request Sample |
| BENTONE® 1000 | Elementis | BENTONE® 1000 is an organic solventborne derivative of bentonite clay. This highly efficient and cost- effective rheological additive is designed for low- to intermediate polarity organic systems. | Request Sample |
| BENTONE® 27 | Elementis | BENTONE® 27 is an organic solventborne derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | Request Sample |
| BENTONE® 34 | Elementis | BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems. | Request Sample |
| BENTONE® 38 | Elementis | BENTONE® 38 is an organic solventborne derivative of a hectorite clay. This highly efficient rheological additive is designed for low to intermediate polarity organic systems. | Request Sample |
| BENTONE® 52 | Elementis | BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coa...view more BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coatings systems. view less | Request Sample |
| BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...view more BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. view less | Request Sample |
| BENTONE® 57 | Elementis | BENTONE® 57 is an organic solventborne derivative of bentonite clay. This highly efficient and cost-effective rheological additive is designed for high-polarity organic systems. | Request Sample |
| BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...view more BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. view less | Request Sample |
| BENTONE® DE | Elementis | BENTONE® DE is a highly beneficiated, waterborne hyperdispersible powdered hectorite clay. | Request Sample |
| BENTONE® DH | Elementis | BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrifici...view more BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrificing performance . It is also crystalline silica-free; therefore, there are no Prop 65 reporting requirements. It is also compatible with a wide variety of rheological modifiers. Starting point formulations are available upon request. view less | Request Sample |
| BENTONE® DY | Elementis | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| BENTONE® DY CE | Elementis | BENTONE® DY CE is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| BENTONE® EW NA | Elementis | BENTONE® EW NA is a highly beneficiated, easily dispersible waterborne powdered smectite clay. | Request Sample |
| BENTONE® GS | Elementis | BENTONE® GS is a beneficiated, waterborne powdered smectite clay specifically developed for construction applications. | Request Sample |
| BENTONE® HC | Elementis | BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions ...view more BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions of refined hectorite that develop their full viscosity in the final filled system. view less | Request Sample |
| BENTONE® HD | Elementis | BENTONE® HD is a highly beneficiated hyperdispersible powdered waterborne hectorite clay. | Request Sample |
| BENTONE® LT | Elementis | BENTONE® LT is an organically modified powdered clay additive designed for water-borne systems, primarily latex paints. | Request Sample |
| BENTONE® MA | Elementis | BENTONE® MA is a rheological additive based on a purified hectorite clay that imparts thixotropy and good anti-settling properties to water-borne systems. | Request Sample |
| BENTONE® NP-10 | Elementis | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | Request Sample |
| BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | Request Sample |
| BENTONE® P270 CO | Elementis | BENTONE® P270 CO is a pre-activated hectorite based organoclay in castor oil. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products. | Request Sample |
| BENTONE® P380 MS | Elementis | BENTONE® P380 MS is a pre-activated hectorite based organoclay in odourless mineral spirits. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products. | Request Sample |
| BENTONE SD® 1 | Elementis | BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the pa...view more BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the paint manufacturing process and can be used for post-correction. It provides viscosity increase, reduces sagging of coatings on vertical surfaces and prevents settling of pigments and fillers. view less | Request Sample |
| BENTONE SD® 2 | Elementis | BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvent...view more BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. BENTONE SD® 2 is easy to incorporate and can be added dry to the pigment grinding process without requiring the use of a chemical activator or the preparation of a pregel. It may be used for post correction. view less | Request Sample |
| BENTONE SD® 3 | Elementis | BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not requi...view more BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not require pre-gelling or a chemical activator. Post correction with BENTONE SD® 3 is not recommended. It also has rheological additive provides stable viscosity, controls sag and suspends pigments. view less | Request Sample |
| BENTONE® WBS | Elementis | BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, im...view more BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, improves workability, and is compatible with other thickeners. This product is recommended for waterborne decorative latex paints and similar systems, gypsum plasters, and buiding materials such as mortars and renderings based on lime, cement, and gypsum. view less | Request Sample |
| DAPRO® AP 7010 | Elementis | DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsio...view more DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsions and emulsion paints. view less | Request Sample |
| DAPRO® AP 7010S | Elementis | DAPRO® AP 7010S is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. | Request Sample |
| DAPRO® DF 109 | Elementis | DAPRO® DF 109 imparts good foam control in paints and coatings. DAPRO® DF 109 provides rapid bubble break at low concentrations. | Request Sample |
| DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should...view more DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should be used whenever an immediate short-term effect is needed. All non-volatile components of DAPRO® DF 1492 Foam Suppressor are FDA compliant under CFR Title 21 175.300. view less | Request Sample |
| DAPRO® DF 1760 | Elementis | DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA com...view more DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA compliant under CFR Title 21 175.105; 175.300; 176.170 and 176.180. view less | Request Sample |
| DAPRO® DF 40 | Elementis | DAPRO® DF 40 has excellent defoaming properties providing rapid bubble break and excellent persistence. It shows excellent compatibility and is suitable to use in the let down stage of sensitive coatings systems where optical properties are very important...view more DAPRO® DF 40 has excellent defoaming properties providing rapid bubble break and excellent persistence. It shows excellent compatibility and is suitable to use in the let down stage of sensitive coatings systems where optical properties are very important (e.g. gloss, transparency). view less | Request Sample |
| DAPRO® DF 404 | Elementis | DAPRO® DF 404 can be used for many types of applications including roller coating, spraying, dipping and flow coating. DAPRO® DF 404 is particularly effective in pigmented acrylate / polyurethane / alkyd combinations, water reducible baking enamels and hy...view more DAPRO® DF 404 can be used for many types of applications including roller coating, spraying, dipping and flow coating. DAPRO® DF 404 is particularly effective in pigmented acrylate / polyurethane / alkyd combinations, water reducible baking enamels and hybrid systems. view less | Request Sample |
| DAPRO® DF 451 | Elementis | DAPRO® DF 451 is especially efficient in destabilizing both macro and micro foam in water- based coatings and inks. The defoamer exhibits very good persistence and has minimal impact on gloss development and color acceptance and thus is an excellent defoa...view more DAPRO® DF 451 is especially efficient in destabilizing both macro and micro foam in water- based coatings and inks. The defoamer exhibits very good persistence and has minimal impact on gloss development and color acceptance and thus is an excellent defoamer for eliminating application foam. view less | Request Sample |
| DAPRO® DF 47 | Elementis | DAPRO® DF 47 is a general purpose let down defoamer for decorative coatings. It can be used in all water based paints and decorative coatings and is suitable for a broad range of latex systems. | Request Sample |
| DAPRO® DF 51 | Elementis | DAPRO® DF 51 is mineral oil free and has excellent defoaming properties, particularly in flexo-inks and paper coatings. DAPRO® DF 51 is particularly suitable in systems where mineral oils are unacceptable in the chemical waste water. | Request Sample |
| DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 is a bubble releasing, anti-foaming agent for variety of solvent-borne coatings. Applications include alkyd enamels, PUR, epoxies, and acrylics. | Request Sample |
| DAPRO® DF 537 | Elementis | DAPRO® DF 537 is effective across a broad range of water based formulations and latex systems. The product has an excellent combination of foam control and compatibility. This allows for easy incorporation while maintaining persistent defoaming of the sys...view more DAPRO® DF 537 is effective across a broad range of water based formulations and latex systems. The product has an excellent combination of foam control and compatibility. This allows for easy incorporation while maintaining persistent defoaming of the system over the long term. DAPRO® DF 537 is used to prevent and minimize foam in architectural paints, water based printing inks, and latex adhesive and construction systems. view less | Request Sample |
| Dapro® DF 615 | Elementis | Dapro® DF 615 is a stable and effective silicone emulsion foam control agent. Easily diluted in water, Dapro® DF 615 is for use in all aqueous media. It is certified kosher and pareve. | Request Sample |
| DAPRO® DF 661 | Elementis | DAPRO® DF 661 is especially useful in water-based industrial coatings particularly amino baking paint systems and has little to no impact on gloss characteristics. DAPRO® DF 661 also exhibits excellent phase stability in drums. | Request Sample |
| DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | Request Sample |
| DAPRO® DF 696 | Elementis | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...view more DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. view less | Request Sample |
| DAPRO® DF 7005 | Elementis | DAPRO® DF 7005 is a silicone free liquid defoamer, economical in use, for universal waterborne applications. The product shows very good long-term efficiency. | Request Sample |
| DAPRO® DF 7007 | Elementis | DAPRO® DF 7007 is a chelating catalyst to replace cobalt based dryers in waterborne coatings. | Request Sample |
| DAPRO® DF 7010 | Elementis | DAPRO® DF 7010 is a liquid defoamer, economical in use, for universal waterborne applications The product shows very good long-term efficiency. | Request Sample |
| DAPRO® DF 7015 | Elementis | DAPRO® DF 7010 is a defoamer for waterborne systems with very good emulsifying properties. It is specially recommended for use in grinding pastes, emulsion paints and inks. | Request Sample |
| DAPRO® DF 7540 | Elementis | DAPRO® DF 7540 is a silicone free liquid defoamer for use in waterborne systems. This product has outstanding emulsifying properties in water. | Request Sample |
| DAPRO® DF 7580 | Elementis | DAPRO® DF 7580 is a silicone free defoamer for waterborne systems. This product is very easily emulsifiable in water. | Request Sample |
| DAPRO® DF 80 | Elementis | DAPRO® DF 80 is a non-ionic emulsifiable defoamer that imparts excellent foam control properties in aqueous foaming media. It is particularly effective in adhesives, water reducible industrial coatings and acrylic, vinyl acrylic, and polyvinyl acetate emu...view more DAPRO® DF 80 is a non-ionic emulsifiable defoamer that imparts excellent foam control properties in aqueous foaming media. It is particularly effective in adhesives, water reducible industrial coatings and acrylic, vinyl acrylic, and polyvinyl acetate emulsion systems. DAPRO® DF 80 exhibits excellent clean-up properties. view less | Request Sample |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing step...view more DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. view less | Request Sample |
| DAPRO® DF 975 | Elementis | DAPRO® DF 975 is a silicone-free waterborne defoamer based on a dispersion of olefinic solids. This product imparts excellent foam control properties in architectural, industrial paints and coatings and inks. | Request Sample |
| DAPRO® DF 99 | Elementis | DAPRO DF 99 is water dispersible defoamer which is excellent in aqueous media. DAPRO® DF 99 is particularly effective in flexo, gravure and screen printing inks, adhesives and water based industrial coatings as it exhibits®fast knockdown even at low use l...view more DAPRO DF 99 is water dispersible defoamer which is excellent in aqueous media. DAPRO® DF 99 is particularly effective in flexo, gravure and screen printing inks, adhesives and water based industrial coatings as it exhibits®fast knockdown even at low use levels. DAPRO® DF 99 is excellent in suppressing foam in effluent systems. view less | Request Sample |
| DAPRO® FA-NCO-6 | Elementis | DAPRO® FA-NCO-6 is a solventborne dispersion of flatting agents in mineral sprits. It provides simple stir-in incorporation, uniform and efficient gloss reduction and consistency. | Request Sample |
| DAPRO® FK 321 | Elementis | DAPRO® FK 321 is an effective solventborne auxiliary for reducing the resistance of paints that are sprayed electrostatically. | Request Sample |
| DAPRO® FX 511 | Elementis | DAPRO® FX 511 is a low odour waterborne coalescing agent that has been designed for dispersions, dispersion paints and plasters. | Request Sample |
| DAPRO® FX 513 | Elementis | DAPRO® FX 513 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC paint systems. This product shows excellent film formation, scrub resistance, improved gloss and open-time. | Request Sample |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514...view more DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514 shows excellent film formation, scrub resistance, improved gloss and open-time. view less | Request Sample |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. DAPRO® NA 1622 is easy to incorporate in solventborne coatings and inks. | Request Sample |
| DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...view more DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. view less | Request Sample |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | Request Sample |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...view more DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. view less | Request Sample |
| DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. | Request Sample |
| Easy Clean Coatings 1000 | 3M Advanced Materials Division | 3M™ Easy Clean Coating ECC-1000 is a fluoropolymer solution used for coating ceramic, glass and other non-porous surfaces. Once applied, the result is an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time...view more 3M™ Easy Clean Coating ECC-1000 is a fluoropolymer solution used for coating ceramic, glass and other non-porous surfaces. Once applied, the result is an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time between cleanings. view less | |
| Easy Clean Coatings 4000 | 3M Advanced Materials Division | 3M™ Easy Clean Coating ECC-4000 is a fluoropolymer used for coating ceramic and glass surfaces. Once it air-dries, it provides an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time between cleanings. | |
| Easy Clean Coatings 6000 | 3M Advanced Materials Division | 3M™ Easy Clean Coating ECC-6000 is a fluoropolymer solution used for coating non-porous ceramic, glass or metal oxide surfaces. Once it bonds with a substrate, it provides an “easy-to-clean” surface that resists staining, hard water deposits and soils, he...view more 3M™ Easy Clean Coating ECC-6000 is a fluoropolymer solution used for coating non-porous ceramic, glass or metal oxide surfaces. Once it bonds with a substrate, it provides an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time between cleanings. view less | |
| FINNTALC M30 | Elementis | FINNTALC M30 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product s...view more FINNTALC M30 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. view less | Request Sample |
