ACTIV-8® | Vanderbilt Minerals, LLC | ACTIV-8® is a drier accelerator used to improve dry times and catalyst stability in systems using cobalt or manganese driers. ACTIV-8 works as a drier accelerator in coatings that dry through an oxidative process, such as alkyd coatings. | Request Sample |
ACTIV-8® HGL | Vanderbilt Minerals, LLC | ACTIV-8® HGL is a drier accelerator used to improve dry times and catalyst stability in systems using cobalt or manganese driers. ACTIV-8 HGL works as a drier accelerator in coatings that dry through an oxidative process, such as alkyd coatings. ACTIV-8...view more ACTIV-8® HGL is a drier accelerator used to improve dry times and catalyst stability in systems using cobalt or manganese driers. ACTIV-8 HGL works as a drier accelerator in coatings that dry through an oxidative process, such as alkyd coatings. ACTIV-8 HGL is particularly suited for waterborne coatings and can reduce loss-of-dry. view less | Request Sample |
BILT-PLATES® 156 | Vanderbilt Minerals, LLC | BILT-PLATES® 156 is an air floated kaolin clay (hydrated aluminum silicate). It is used in coatings such as primers, alkyd flats, and latex paints. This product is good for titanium dioxide extension in coatings that do not require a high brightness exten...view more BILT-PLATES® 156 is an air floated kaolin clay (hydrated aluminum silicate). It is used in coatings such as primers, alkyd flats, and latex paints. This product is good for titanium dioxide extension in coatings that do not require a high brightness extender. view less | Request Sample |
DARVAN® 1 Spray Dried | Vanderbilt Minerals, LLC | DARVAN® 1 Spray Dried is an anionic dispersing agent. It is highly effective for a wide variety of pigments in aqueous sytems, including carbon black, mineral colorants, organic dyestuffs, fillers, extenders and clays. This product is also used in agricul...view more DARVAN® 1 Spray Dried is an anionic dispersing agent. It is highly effective for a wide variety of pigments in aqueous sytems, including carbon black, mineral colorants, organic dyestuffs, fillers, extenders and clays. This product is also used in agricultural sprays, pitch control, and rubber latexes. view less | Request Sample |
DARVAN® 2 | Vanderbilt Minerals, LLC | DARVAN® 2 is a highly effective emulsifying and dispersing agent for prevention of agglomeration or coalescence of suspended solids, liquids or gases in aqueous systems. It is used to prevent settling, to lower the viscosity of pigment slurries, and to im...view more DARVAN® 2 is a highly effective emulsifying and dispersing agent for prevention of agglomeration or coalescence of suspended solids, liquids or gases in aqueous systems. It is used to prevent settling, to lower the viscosity of pigment slurries, and to improve stability of emulsions. This product is particularly effective with zinc oxide, suflur and clays. view less | Request Sample |
DARVAN® 670 | Vanderbilt Minerals, LLC | DARVAN® 670 is a highly effective dispersing agent for the prevention of agglomeration or coalescence of suspended solids, liquids or gases in aqueous systems. This product is used to prevent settling, to lower the viscosity of pigment slurries, and to im...view more DARVAN® 670 is a highly effective dispersing agent for the prevention of agglomeration or coalescence of suspended solids, liquids or gases in aqueous systems. This product is used to prevent settling, to lower the viscosity of pigment slurries, and to improve stability of emulsions. view less | Request Sample |
DARVAN® 670L | Vanderbilt Minerals, LLC | DARVAN® 670L is a liquid anionic dispersing agent for the preparation of aqueous dispersions of colored pigments, dyes, extender pigments, etc. that are used in the manufacture of water-borne paints and coatings. This product is effective for viscosity re...view more DARVAN® 670L is a liquid anionic dispersing agent for the preparation of aqueous dispersions of colored pigments, dyes, extender pigments, etc. that are used in the manufacture of water-borne paints and coatings. This product is effective for viscosity reduction of high solids dispersions of red iron oxide and similar pigments. view less | Request Sample |
DARVAN® 7-N | Vanderbilt Minerals, LLC | DARVAN 7-N is a low foaming sodium polymethacrylate dispersing agent that is highly effective in dispersing minerals in water based systems. | Request Sample |
DARVAN® 7-NS | Vanderbilt Minerals, LLC | DARVAN 7-NS is the powder form of DARVAN 7-N, a low-foaming sodium polymethacrylate dispersing agent. This product is a very effective dispersant for pigments in aqueous systems. | Request Sample |
DARVAN® 811 | Vanderbilt Minerals, LLC | DARVAN® 811 is an anionic polyelectrolyte dispersant used in dispersing minerals and pigments in all types of water-based coatings. It has been found to be an effective dispersing agent for natural ground calcium carbonate (GCC), precipitated calcium carb...view more DARVAN® 811 is an anionic polyelectrolyte dispersant used in dispersing minerals and pigments in all types of water-based coatings. It has been found to be an effective dispersing agent for natural ground calcium carbonate (GCC), precipitated calcium carbonate (PCC), kaolin clay, talc, wollastonite and titanium dioxide. view less | Request Sample |
DARVAN® C-N | Vanderbilt Minerals, LLC | DARVAN® C-N is a highly effective dispersing agent used to lower the viscosity of particulate slurries and to inhibit the settling of particulate solids. | Request Sample |
DIXIE CLAY® | Vanderbilt Minerals, LLC | DIXIE CLAY® is an air floated kaolin clay (hydrated aluminum silicate). It is used as an extender pigment in coatings and as a filler for primers, alkyd flats and latex paints. This product is a good titanium dioxide spacer in coatings that do not requir...view more DIXIE CLAY® is an air floated kaolin clay (hydrated aluminum silicate). It is used as an extender pigment in coatings and as a filler for primers, alkyd flats and latex paints. This product is a good titanium dioxide spacer in coatings that do not require a high brightness extender. view less | Request Sample |
DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...view more DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® 100M | AlzChem AG | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...view more DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...view more DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...view more DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...view more DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...view more DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. view less | |
DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...view more DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. view less | |
DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...view more DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. view less | |
DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...view more DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...view more DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. view less | |
DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
McNAMEE® CLAY | Vanderbilt Minerals, LLC | McNAMEE® CLAY is an air floated kaolin clay (hydrated aluminum silicate). This product can be used as an extender pigment in coatings and as a filler for primers, alkyd flats and latex paints. It is compatible with water and solvent systems. | Request Sample |
PEERLESS® | Vanderbilt Minerals, LLC | PEERLESS® Clay is an air floated kaolin clay (hydrated aluminum silicate). It is used as an extender pigment in coatings and as a filler for primers, alkyd flats and latex paints. | Request Sample |
PYRAX® ABB | Vanderbilt Minerals, LLC | PYRAX® ABB is a pyrophyllite (hydrated aluminum silicate) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functiona...view more PYRAX® ABB is a pyrophyllite (hydrated aluminum silicate) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functional alternate for specialty mica products, including mineralite micas. PYRAX® ABB also imparts mud crack resistance to high build coatings such as texture paints and block fillers. view less | Request Sample |
PYRAX® B | Vanderbilt Minerals, LLC | PYRAX® B is a hydrated aluminum silicate (pyrophyllite) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functional ...view more PYRAX® B is a hydrated aluminum silicate (pyrophyllite) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functional alternate for specialty mica products, including mineralite micas. view less | Request Sample |
SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...view more SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. view less | |
Silzot® HQ plus (Powder) | AlzChem AG | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
Silzot® HQ (Powder) | AlzChem AG | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
SILZOT® RTP | AlzChem AG | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
Silzot® SQ | AlzChem AG | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
Silzot® TQ (Powder) | AlzChem AG | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
VAN GEL® B | Vanderbilt Minerals, LLC | VAN GEL® B is derived from a naturally-occurring colloidal magnesium aluminum silicate. It is used in latex paint for the development of smooth thixotropic consistency. VAN GEL® B provides dripless application and eliminates or minimizes need to stir pai...view more VAN GEL® B is derived from a naturally-occurring colloidal magnesium aluminum silicate. It is used in latex paint for the development of smooth thixotropic consistency. VAN GEL® B provides dripless application and eliminates or minimizes need to stir paint prior to its use. view less | Request Sample |
VAN GEL® ES | Vanderbilt Minerals, LLC | VAN GEL® ES is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessiv...view more VAN GEL® ES is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessive viscosity. It prevents syneresis and settling, provides dripless application, controlled sag and improved leveling. view less | Request Sample |
VAN GEL SX | Vanderbilt Minerals, LLC | VAN GEL SX is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessive...view more VAN GEL SX is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessive viscosity. It prevents syneresis and settling, provides dripless application, controlled sag and improved leveling. view less | Request Sample |
VANCIDE® MZ-98 | Vanderbilt Minerals, LLC | VANCIDE® MZ-98 is an industrial fungicide and preservative used in formulation of following non-preservative applications: adhesives, dried films, industrial yarns and fabrics, latex paint, paper and paperboard, paper coatings, water reduced industrial m...view more VANCIDE® MZ-98 is an industrial fungicide and preservative used in formulation of following non-preservative applications: adhesives, dried films, industrial yarns and fabrics, latex paint, paper and paperboard, paper coatings, water reduced industrial materials. view less | Request Sample |
VANSIL® CK-20 | Vanderbilt Minerals, LLC | VANSIL® CK-20 is a grade of wollastonite (calcium metasilicate) which disperses to 0 to 1 Hegman fineness. This product is useful as an extender in high-build coatings such as block fillers and texture paints. | Request Sample |
VANSIL® HR-1500 | Vanderbilt Minerals, LLC | VANSIL® HR-1500 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance...view more VANSIL® HR-1500 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. view less | Request Sample |
VANSIL® HR-2000 | Vanderbilt Minerals, LLC | VANSIL® HR-2000 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance ...view more VANSIL® HR-2000 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. view less | Request Sample |
VANSIL® W-10 | Vanderbilt Minerals, LLC | VANSIL® W-10 is a coarse grade of wollastonite (calcium metasilicate) with 20% retained on a 325 mesh sieve. This product is useful as an extender in high-build coatings such as block fillers and texture paints. | Request Sample |
VANSIL® W-20 | Vanderbilt Minerals, LLC | VANSIL® W-20 is a grade of wollastonite (calcium metasilicate) which disperses to 0 to 1 Hegman fineness. This product is useful as an extender in high-build coatings such as block fillers and texture paints. | Request Sample |
VANSIL® W-30 | Vanderbilt Minerals, LLC | VANSIL® W-30 is a grade of wollastonite (calcium metasilicate) that disperses to 4 Hegman fineness. This grade provides smooth paint films and is used as a general purpose extender in interior and exterior architectural coatings. | Request Sample |
VANSIL® W-40 | Vanderbilt Minerals, LLC | VANSIL® W-40 is a grade of wollastonite (calcium metasilicate) which disperses to 5 Hegman fineness. This grade provides smooth paint films and is used as a general purpose extender in interior and exterior architectural coatings. | Request Sample |
VANSIL® W-50 | Vanderbilt Minerals, LLC | VANSIL® W-50 is a fine grind of wollastonite (calcium metaxilicate) which disperses to a 6-7 Hegman at three pounds per gallon. This product is a suitable filler for liquid industrial and corrosion resistant coatings, powder coatings, and semi-gloss archi...view more VANSIL® W-50 is a fine grind of wollastonite (calcium metaxilicate) which disperses to a 6-7 Hegman at three pounds per gallon. This product is a suitable filler for liquid industrial and corrosion resistant coatings, powder coatings, and semi-gloss architectural coatings. view less | Request Sample |
VANSIL® WG | Vanderbilt Minerals, LLC | VANSIL® WG is a high aspect ratio, long needle (acicular) grade of wollastonite (calcium metasilicate) principally used as a reinforcing agent to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coa...view more VANSIL® WG is a high aspect ratio, long needle (acicular) grade of wollastonite (calcium metasilicate) principally used as a reinforcing agent to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. view less | Request Sample |
VANZAN® | Vanderbilt Minerals, LLC | VANZAN® is a standard grade xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as ...view more VANZAN® is a standard grade xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH and temperature ranges. view less | Request Sample |
VANZAN® D | Vanderbilt Minerals, LLC | VANZAN® D is a xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extre...view more VANZAN® D is a xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH and temperature ranges. VANZAN® D is an easily dispersible grade that is activated when the pH of the system is elevated. view less | Request Sample |
VEEGUM® R | Vanderbilt Minerals, LLC | VEEGUM® R is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessive ...view more VEEGUM® R is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessive viscosity. It prevents syneresis and settling, provides dripless application, controlled sag and improved leveling. view less | Request Sample |
VEEGUM® T | Vanderbilt Minerals, LLC | VEEGUM® T magnesium aluminum silicate is a water-washed natural smectite clay. Aqueous dispersions of VEEGUM® T are high viscosity thixotropic gels at low solids. The thixotropy developed in latex paints by VEEGUM® T imparts desirable properties such as...view more VEEGUM® T magnesium aluminum silicate is a water-washed natural smectite clay. Aqueous dispersions of VEEGUM® T are high viscosity thixotropic gels at low solids. The thixotropy developed in latex paints by VEEGUM® T imparts desirable properties such as no separation, dripless application, and leveling with sag resistance. view less | Request Sample |
Alkyd Modified Acrylic Latex DTM Primer (Formulation #121813) | Vanderbilt Minerals, LLC | A formulation for an alkyd modified acrylic latex DTM primer which utilizes VAN GEL® SX, DARVAN® CN, BILT-PLATES® 156, and ACTIV-8®. | |
Alkyd Modified Acrylic Latex Maintenance Primer (Formulation #120313) | Vanderbilt Minerals, LLC | A formulation for an alkyd modified acrylic latex maintenance primer which utilizes VAN GEL® ES, DARVAN® 7N, and ACTIV-8®. | |
Ceiling Paint (Formulation #051414) | Vanderbilt Minerals, LLC | A ceiling paint which utilizes the products DARVAN® 7-N Dispersant, PYRAX® ABB Pyrophyllite, and VANSIL® W-20 Wollastonite. | |
Clear Alkyd Varnish (Formulation #032100) | Vanderbilt Minerals, LLC | A clear alkyd varnish utilizing ACTIV-8® drier accelerator. | |
Exterior Latex Deep Toned House Paint (Formulation #040212) | Vanderbilt Minerals, LLC | This formulation is for an exterior latex house paint which utilizes DARVAN® CN Dispersant, VANCIDE® MZ-98 Fungicide, and BILT-PLATES® 156 Clay. | |
General Purpose Primer for Stain Blocking and Tannin Blocking (Formulation #070809) | Vanderbilt Minerals, LLC | A general purpose primer formulation for stain and tannin blocking. | |
Gray Acrylic Latex Rust Inhibitive Primer (Formulation #012414) | Vanderbilt Minerals, LLC | A formulation for a gray acrylic latex rust inhibitive primer. | |
High Solids Alkyd Flat Paint (Formulation #032300) | Vanderbilt Minerals, LLC | A high solids alkyd flat paint formulation using ACTIV-8® a drier, stabilizer and accelerator. | |
Interior Latex Egg Shell Paint (Formulation #041111) | Vanderbilt Minerals, LLC | A formulation for an interior latex egg shell paint using VANSIL® W-30 and DARVAN® 7-N. | |
Interior Latex Semi-Gloss Paint (Formulation #021711) | Vanderbilt Minerals, LLC | A formulation for an interior latex semi-gloss paint. | |
Interior Semi-Gloss Paint (Formulation #062512) | Vanderbilt Minerals, LLC | An interior semi-gloss paint formulation using DARVAN® 7-N, VANSIL® W-30 and VAN GEL® O. | |
Interior Semi-Gloss Wall Paint (Formulation #082012) | Vanderbilt Minerals, LLC | A formulation for an interior semi-gloss wall paint. | |
Interior Semi-Gloss Wall Paint (Formulation #082112) | Vanderbilt Minerals, LLC | An interior semi-gloss wall paint formulation using DARVAN® 561 and VANSIL® W-30. | |
Interior Texture Paint (Formulation #010303) | Vanderbilt Minerals, LLC | An interior texture paint formulation using, DARVAN® 7N, PYRAX® ABB, VANZAN® and VANSIL® WG. | |
Interior Texture Paint (Formulation #042099) | Vanderbilt Minerals, LLC | A formulation for an interior texture paint. | |
Interior Texture Paint (Formulation #061406) | Vanderbilt Minerals, LLC | An interior texture paint formulation using DARVAN® 811, PYRAX® B, VANZAN® and VANSIL® WG. | |
Interior/Exterior Block Filler (Formulation #041409) | Vanderbilt Minerals, LLC | A formulation for an interior/exterior block filler. | |
Low Cost Ceiling Paint (Formulation #042809) | Vanderbilt Minerals, LLC | A low cost ceiling paint formulation using PYRAX® ABB and DARVAN® 7-N. | |
Low VOC High Gloss Enamel Trim Paint (Formulation #031710) | Vanderbilt Minerals, LLC | A low VOC, high gloss, enamel, trim paint formulation using ACTIV-8®. | |
Low VOC Interior Flat Latex Wall Paint with Good Scrub Resistance (Formulation #062414) | Vanderbilt Minerals, LLC | A formulation for a low-VOC interior flat latex wall paint. This scrub-resistant formula features the products VANSIL® CK-20 Wollastonite and DARVAN® 7-N Dispersant. | |
Low VOC Interior Latex Satin Wall Paint (Formulation #071510) | Vanderbilt Minerals, LLC | A low VOC interior latex satin wall paint formulation using VANSIL® W-30 AND DARVAN® 7-N. | |
Ready Mix Joint Compound (Formulation #032806) | Vanderbilt Minerals, LLC | A ready mix joint compound formulation using DAVAN® 811 and PYRAX® B. | |
Water-borne Alkyd Emulsion Red Iron Oxide Primer (Formulation #111413) | Vanderbilt Minerals, LLC | A formulation for a water-borne alkyd emulsion red iron oxide primer which utilizes VAN GEL® SX, DARVAN® CN, VANSIL® W-30, and ACTIV-8®. | |
Water-Reducible Alkyd Black Gloss Corrosion Inhibitive Dip Enamel (Formulation #103013) | Vanderbilt Minerals, LLC | A water-reducible alkyd black gloss corrosion inhibitive dip enamel formulation which utilizes VEEGUM® R and ACTIV-8® HGL. | |
Yellow TX-DOT Traffic Marking Paint (Formulation #010814) | Vanderbilt Minerals, LLC | A formula for a yellow TX-DOT traffic marking paint. | |
Zero VOC High Quality Interior Flat Wall Paint (Formulation #071808) | Vanderbilt Minerals, LLC | A formulation for a zero VOC high quality interior flat wall paint using VANSIL® W-40. | |
Zero VOC Quality Interior Latex Flat Paint | Vanderbilt Minerals, LLC | A formulation for a zero VOC quality interior, latex, flat paint. |