| HydriCryl 410 | Hydrite Chemical Co. | HydriCryl 410 is an emulsion polymer optimized for high pigment load dispersion applications. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 460 | Hydrite Chemical Co. | HydriCryl 460 is a emulsion polymer that displays maximum pigment wetting and high pigment loads at stable low viscosity. This product is well suited for use in water-based inks and coatings. | |
| RayRez® 252 | Specialty Polymers | RayRez® 252 is a hydrophobic, styrene acrylic emulsion polymer designed for flexographic ink applications. It exhibits outstanding adhesion, water resistance and provides excellent pigment dispersion. RayRez 252 provides high gloss with very good block r...view more RayRez® 252 is a hydrophobic, styrene acrylic emulsion polymer designed for flexographic ink applications. It exhibits outstanding adhesion, water resistance and provides excellent pigment dispersion. RayRez 252 provides high gloss with very good block resistance. view less | |
| RHOPLEX™ AC-261 LF | Univar Solutions | RHOPLEX™ AC-261 LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints. | Request Sample |
| StanChem SC 6257 | StanChem Polymers | StanChem SC 6257 is emulsion polymer that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6257 exhibit good clarity, water resistance, abrasion resistance and excellent adhesion properties. | Request Sample |
| RayCryl® 1809 | Specialty Polymers | RayCryl® 1809 is a flexible 100% acrylic self crosslinking emulsion polymer designed for use in domestic fabric coatings and gesso base coatings. In addition, RayCryl® 1809 is receptive to solvent based and UV inks, and non-yellowing. | |
| Ottopol 300 | Gellner Industrial, LLC | Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acry...view more Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acrylic polymers. view less | |
| RayFlex® 2044L | Specialty Polymers | RayFlex® 2044L is a very soft acrylic emulsion polymer designed for dust capture and holding through proper dry-tack performance in high loft air filtration media. RayFlex® 2044L improves fiber-to-fiber bonding and adjustable tack levels through blending. | |
| RayFlex® 439A | Specialty Polymers | RayFlex® 439A is a soft styrene acrylic emulsion polymer with excellent tensile strength and elongation for roof and mastic applications. It is designed to provide compatibility with bentonite stabilized asphaltic emulsions for increased durability and fl...view more RayFlex® 439A is a soft styrene acrylic emulsion polymer with excellent tensile strength and elongation for roof and mastic applications. It is designed to provide compatibility with bentonite stabilized asphaltic emulsions for increased durability and flexibility, while offering good adhesion. view less | |
| StanChem SC 6744 | StanChem Polymers | StanChem SC 6744 is emulsion polymer that can be used as a binder for a variety of primers and coatings for different substrates - cold rolled steel, wood, and plastic. Coatings formulated with SC 6744 exhibit good clarity, water resistance and excellent ...view more StanChem SC 6744 is emulsion polymer that can be used as a binder for a variety of primers and coatings for different substrates - cold rolled steel, wood, and plastic. Coatings formulated with SC 6744 exhibit good clarity, water resistance and excellent adhesion properties. view less | Request Sample |
| RAYKOTE® 1446G | Specialty Polymers, Inc. | RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for pr...view more RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for primer applications. view less | |
| RayVace® 1724 | Specialty Polymers | RayVace® 1724 is a hard vinyl acetate acrylic emulsion polymer designed for use as a fabric stiffener. Suggested for use in pleated blinds, as a fabric stiffener, and a fabric stabilizer. Key features include self crosslinking, hard free film, and imparts...view more RayVace® 1724 is a hard vinyl acetate acrylic emulsion polymer designed for use as a fabric stiffener. Suggested for use in pleated blinds, as a fabric stiffener, and a fabric stabilizer. Key features include self crosslinking, hard free film, and imparts dimensional stability. view less | |
| Luna-nol C-12 | DKSH | Luna-nol C-12 is the ideal water based coalescent agent for emulsion polymer systems like all types of latex paints or methacrylate adhesive systems. It has preferable film forming properties and yields e.g. to a reduction of the minimum film forming temp...view more Luna-nol C-12 is the ideal water based coalescent agent for emulsion polymer systems like all types of latex paints or methacrylate adhesive systems. It has preferable film forming properties and yields e.g. to a reduction of the minimum film forming temperature. view less | Request Sample |
| SYNTHEMUL® 40-412 | Polynt Composites | SYNTHEMUL® 40-412, in the form of a white liquid, is a multi-purpose, carboxylated acrylate emulsion polymer that can be used in interior or exterior trade sales coatings. This product has high gloss, good tint retention, enhanced stability, with low foam...view more SYNTHEMUL® 40-412, in the form of a white liquid, is a multi-purpose, carboxylated acrylate emulsion polymer that can be used in interior or exterior trade sales coatings. This product has high gloss, good tint retention, enhanced stability, with low foaming properties. view less | |
| RayKote® 1431 | Specialty Polymers | RayKote® 1431 is a styrene acrylic emulsion polymer designed specifically as a cost-effective and user friendly vehicle for industrial wood primer applications. It is used for factory applied interior and exterior wood primers. Features excellent block re...view more RayKote® 1431 is a styrene acrylic emulsion polymer designed specifically as a cost-effective and user friendly vehicle for industrial wood primer applications. It is used for factory applied interior and exterior wood primers. Features excellent block resistance, water resistance, and outstanding sandability. view less | |
| RayFlex® 118 | Specialty Polymers | RayFlex® 118 is a high solids, high performance, all acrylic emulsion polymer specifically designed for wall mastic, caulks, and sealants, and roof coating applications. Coatings formulated with RayFlex® 118 have outstanding elongation and flexibility. Ra...view more RayFlex® 118 is a high solids, high performance, all acrylic emulsion polymer specifically designed for wall mastic, caulks, and sealants, and roof coating applications. Coatings formulated with RayFlex® 118 have outstanding elongation and flexibility. RayFlex® 118 also provides excellent adhesion and water resistance. view less | |
| RAYKOTE® 1431 | Specialty Polymers, Inc. | RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufa...view more RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufactured interiors and exterior wood primers. view less | |
| TROYSOL™ ZLAC | Arxada – Troy Corporation | TROYSOL™ ZLAC is a multipurpose, silicone-free wetting additive that improves substrate wetting, system flow and leveling, adhesion, gloss and color uniformity in aqueous coating, emulsion polymer, ink and adhesive applications. Provides all the benefits ...view more TROYSOL™ ZLAC is a multipurpose, silicone-free wetting additive that improves substrate wetting, system flow and leveling, adhesion, gloss and color uniformity in aqueous coating, emulsion polymer, ink and adhesive applications. Provides all the benefits of this product with no contribution to VOC in aqueous systems. view less | Request Sample |
| EPS® 2580 | EPS Materials | EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 pr...view more EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 provides the capability to formulate coatings at <50g/L VOC. view less | Request Sample |
| RAYPLUS™ 1098 | Specialty Polymers, Inc. | RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resis...view more RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resistant to water, UV rays and chemical abrasion. view less | |
| StanChem SC 6933 | StanChem Polymers | StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit goo...view more StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit good clarity, water resistance and excellent adhesion properties. view less | Request Sample |
| RayCryl® 4102 | Specialty Polymers | RayCryl® 4102 is a self crosslinking acrylic emulsion polymer designed to provide outstanding performance properties for industrial wood application. Coatings made with RayCryl® 4102 will provide excellent clarity, superior mar and scratch resistance and ...view more RayCryl® 4102 is a self crosslinking acrylic emulsion polymer designed to provide outstanding performance properties for industrial wood application. Coatings made with RayCryl® 4102 will provide excellent clarity, superior mar and scratch resistance and minimal grain raise. Also features excellent stain and chemical resistance, and is compatible with PUD’s. view less | |
| RayFlex® 484 | Specialty Polymers | RayFlex® 484 is a styrene acrylic emulsion polymer designed for wall mastic and roof coatings applications. Coatings formulated with RayFlex® 484 have excellent balance of tensile strength and elongation. It offers excellent water resistance while forming...view more RayFlex® 484 is a styrene acrylic emulsion polymer designed for wall mastic and roof coatings applications. Coatings formulated with RayFlex® 484 have excellent balance of tensile strength and elongation. It offers excellent water resistance while forming a breathable membrane for a fast-drying, durable exterior coating with good adhesion. view less | |
| RHOPLEX™ 2500 | Univar Solutions | RHOPLEX™ 2500 is an all-Acrylic Emulsion Polymer that is designed for tough, water-resistant masonry paints and primers. It possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), the ...view more RHOPLEX™ 2500 is an all-Acrylic Emulsion Polymer that is designed for tough, water-resistant masonry paints and primers. It possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), the ability to retard efflorescence in cured cementitious products and high pigment-binding capacity. view less | Request Sample |
| RayCryl® 458 | Specialty Polymers | RayCryl® 458 is a 100% acrylic emulsion polymer designed to provide outstanding exterior durability and UV resistance. Is APEO free. Coatings formulated with RayCryl® 458 exhibit compatibility with cement and sand mixtures for repairs, EIFS, grouts, and d...view more RayCryl® 458 is a 100% acrylic emulsion polymer designed to provide outstanding exterior durability and UV resistance. Is APEO free. Coatings formulated with RayCryl® 458 exhibit compatibility with cement and sand mixtures for repairs, EIFS, grouts, and decorative overlays. Suggested for use in exterior architectural coatings, textured coatings, and polymer admix. view less | |
| RayFlex® 2024 | Specialty Polymers | RayFlex® 2024 is a 100% acrylic elastomeric emulsion polymer designed for wall mastic and roof coatings. Coatings formulated with RayFlex® 2024 have outstanding exterior durability and UV resistance. The chemistry of RayFlex® 2024 offers high elongation a...view more RayFlex® 2024 is a 100% acrylic elastomeric emulsion polymer designed for wall mastic and roof coatings. Coatings formulated with RayFlex® 2024 have outstanding exterior durability and UV resistance. The chemistry of RayFlex® 2024 offers high elongation and tensile strength properties. Also features low temperature flexibility and excellent dirt pick up resistance. view less | |
| RayVace® 686 | Specialty Polymers | RayVace 686 is an all-purpose vinyl acrylic emulsion polymer designed for interior architectural applications. Coatings formulated with RayVace 686 exhibit excellent color acceptance and good compatibility with rheology modifiers. It provides outstanding ...view more RayVace 686 is an all-purpose vinyl acrylic emulsion polymer designed for interior architectural applications. Coatings formulated with RayVace 686 exhibit excellent color acceptance and good compatibility with rheology modifiers. It provides outstanding scrub and stain resistance. Suggested for use in interior architectural primers, interior architectural flats, and interior architectural semi gloss. view less | |
| RayCryl® 1526 | Specialty Polymers | RayCryl® 1526 is an APEO free, 100% acrylic emulsion polymer designed for both interior and exterior trim enamel applications. It exhibits high gloss, good color acceptance and excellent rheology response. RayCryl® 1526 provides excellent adhesion to wood...view more RayCryl® 1526 is an APEO free, 100% acrylic emulsion polymer designed for both interior and exterior trim enamel applications. It exhibits high gloss, good color acceptance and excellent rheology response. RayCryl® 1526 provides excellent adhesion to wood, aged alkyd, and cementaceous substrates. It imparts very good water resistance for low VOC concrete sealers. view less | |
| RayFlex® 303 | Specialty Polymers | RayFlex® 303 is a high-solids, acrylic elastomeric emulsion polymer for high performance wall mastics and roof coatings. RayFlex® 303 is specifically designed to provide outstanding adhesion to a wide range of construction substrates. Coatings formulated ...view more RayFlex® 303 is a high-solids, acrylic elastomeric emulsion polymer for high performance wall mastics and roof coatings. RayFlex® 303 is specifically designed to provide outstanding adhesion to a wide range of construction substrates. Coatings formulated with RayFlex® 303 have excellent exterior durability, UV resistance, tensile properties and dirt pick-up resistance. view less | |
| RayCryl® 1853 | Specialty Polymers | RayCryl® 1853 is a high solids 100% acrylic emulsion polymer. Is self crosslinking, an excellent foamer, APEO free, and can be filled with clay, corn starch or calcium carbonate. It develops a soft and flexible film that can be used for domestic or indust...view more RayCryl® 1853 is a high solids 100% acrylic emulsion polymer. Is self crosslinking, an excellent foamer, APEO free, and can be filled with clay, corn starch or calcium carbonate. It develops a soft and flexible film that can be used for domestic or industrial textile fabric coatings. Has outstanding UV resistance and film clarity. view less | |
| RayCryl® 604A | Specialty Polymers | RayCryl® 604A is a high performance, all acrylic emulsion polymer for industrial wood and concrete applications. Coatings formulated with RayCryl® 604A are durable, and have excellent adhesion. RayCryl® 604A was specifically designed to crosslink with zin...view more RayCryl® 604A is a high performance, all acrylic emulsion polymer for industrial wood and concrete applications. Coatings formulated with RayCryl® 604A are durable, and have excellent adhesion. RayCryl® 604A was specifically designed to crosslink with zinc, and is compatible with polyurethane dispersions. This capability further enhances the coating’s overall performance properties, including its chemical resistance. view less | |
| RayCryl® 718I | Specialty Polymers | RayCryl® 718i is a self-crosslinking acrylic emulsion polymer with excellent adhesion to wood and concrete substrates. Specifically designed to have a low level of surfactant, RayCryl® 718i exhibits low foaming characteristics. This feature makes it an id...view more RayCryl® 718i is a self-crosslinking acrylic emulsion polymer with excellent adhesion to wood and concrete substrates. Specifically designed to have a low level of surfactant, RayCryl® 718i exhibits low foaming characteristics. This feature makes it an ideal product for flat line industrial applications. Coatings formulated with RayCryl® 718i have excellent block and water resistance. view less | |
| RayTech® 365 | Specialty Polymers | RayTech® 365 is a styrene acrylic emulsion polymer modifier designed to improve water and block resistance of a coating. Block resistance is enhanced with RayTech® 365 without increasing VOCs. RayTech® 365 is an alkali solution that needs to be maintained...view more RayTech® 365 is a styrene acrylic emulsion polymer modifier designed to improve water and block resistance of a coating. Block resistance is enhanced with RayTech® 365 without increasing VOCs. RayTech® 365 is an alkali solution that needs to be maintained at a minimum pH of 9.0. Suggested for use as a modifier, and in waterproofing solution. view less | |
| AROLON® 5900 | Polynt Composites | AROLON® 5900, in the form of a translucent to milky white liquid, is an acrylic polyol emulsion polymer that should be reacted with polyisocyanate. It can be used in industrial maintenance topcoats, light industrial topcoats, rail car topcoats, and DOT to...view more AROLON® 5900, in the form of a translucent to milky white liquid, is an acrylic polyol emulsion polymer that should be reacted with polyisocyanate. It can be used in industrial maintenance topcoats, light industrial topcoats, rail car topcoats, and DOT topcoats. This product has high gloss, good chemical, water, and humidity resistance, with UV stability and UV inhibitors. view less | |
| RayCryl® 459 | Specialty Polymers | RayCryl® 459 is a 100% acrylic emulsion polymer designed to provide outstanding exterior durability and UV resistance. Has a low odor, and is APEO free. Coatings formulated with RayCryl® 459 exhibit compatibility with cement and sand mixtures for repairs,...view more RayCryl® 459 is a 100% acrylic emulsion polymer designed to provide outstanding exterior durability and UV resistance. Has a low odor, and is APEO free. Coatings formulated with RayCryl® 459 exhibit compatibility with cement and sand mixtures for repairs, EIFS, grouts, and decorative overlays. Suggested for use in exterior architectural coatings, textured coatings, and polymer admix. view less | |
| ACRONAL® PRO 770 NA | BASF Dispersions & Resins | ACRONAL PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONAL PRO 770 shows outstanding anti-corrosiv...view more ACRONAL PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONAL PRO 770 shows outstanding anti-corrosive properties both in glossy DTM and matte monocoat/ primer applications without or with only limited addition of phosphate anticorrosive pigments. view less | |
| RayKote® 2000 | Specialty Polymers | RayKote® 2000 is a styrene acrylic emulsion polymer designed to provide excellent tannin stain blocking resistance. Coatings formulated with RayKote® 2000 exhibit outstanding wet and dry adhesion to galvanized, aluminum, wood, and aged alkyd enamel substr...view more RayKote® 2000 is a styrene acrylic emulsion polymer designed to provide excellent tannin stain blocking resistance. Coatings formulated with RayKote® 2000 exhibit outstanding wet and dry adhesion to galvanized, aluminum, wood, and aged alkyd enamel substrates. RayKote® 2000 was developed to have a low film forming temperature, and can easily be formulated into VOC interior and exterior primers. view less | |
| RayFlex® 777 | Specialty Polymers | RayFlex® 777 is an APEO and formaldehyde free, self-crosslinking 100% acrylic emulsion polymer designed for flexible roof coatings. Coatings formulated with RayFlex 777 have excellent water and efflorescence resistance, low temperature flexibility and out...view more RayFlex® 777 is an APEO and formaldehyde free, self-crosslinking 100% acrylic emulsion polymer designed for flexible roof coatings. Coatings formulated with RayFlex 777 have excellent water and efflorescence resistance, low temperature flexibility and outstanding tensile properties. RayFlex 777 provides superior adhesion to polyurethane foam and various construction substrates. Suggested for use in flexible roof coatings. view less | |
| RayCryl® 1856 | Specialty Polymers | RayCryl® 1856 is a high solids 100% acrylic emulsion polymer. It develops a hard film that can be used for domestic or industrial textile fabric and foam coatings. Features include self crosslinking and carboxyl group, hard free film, is an excellent foam...view more RayCryl® 1856 is a high solids 100% acrylic emulsion polymer. It develops a hard film that can be used for domestic or industrial textile fabric and foam coatings. Features include self crosslinking and carboxyl group, hard free film, is an excellent foamer, APEO free, can be filled with clay, starch or calcium carbonate, and has outstanding UV resistance and film clarity. view less | |
| RAYCRYL® 1526 | Specialty Polymers, Inc. | RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the woo...view more RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the wood, aged alkyd, and cement surfaces; and is primarily used to protect surfaces from water resistance and a sealer for concrete. view less | |
| Raycryl® 1001 | Specialty Polymers | RayCry® 1001 is a 100% self-crosslinking, ultra low VOC, acrylic emulsion polymer with excellent resistance to water blushing, chemical and hot tire stains. Features adhesion to a wide variety of substrates and good exterior durability. Designed for use i...view more RayCry® 1001 is a 100% self-crosslinking, ultra low VOC, acrylic emulsion polymer with excellent resistance to water blushing, chemical and hot tire stains. Features adhesion to a wide variety of substrates and good exterior durability. Designed for use in exterior and interior cement surfaces and industrial wood finishes, RayCryl® 1001 can be formulated into both pigmented and clear coatings. view less | |
| RayRez® 200 | Specialty Polymers | RayRez® 200 is a hard styrene acrylic emulsion polymer designed for concrete floor coatings applications. Coatings formulated with this polymer will exhibit excellent chemical, water and block resistance as well as excellent hot tire resistance. RayRez® 2...view more RayRez® 200 is a hard styrene acrylic emulsion polymer designed for concrete floor coatings applications. Coatings formulated with this polymer will exhibit excellent chemical, water and block resistance as well as excellent hot tire resistance. RayRez® 200 can be blended with a softer acrylic emulsion to lower VOC requirements. Suggested for use in residential floor coatings and light industrial floor coatings. view less | |
| RHOPLEX™ WL-91 | Univar Solutions | RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoidin...view more RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoiding surface preparation and raw materials associated with many solvent-borne systems. Furthermore, it exhibits superiority in chemical resistance, oil resistance, and film toughness. view less | Request Sample |
| RayVace® 678 | Specialty Polymers | RayVace® 678 is an APEO and formaldehyde free vinyl acrylic emulsion polymer, designed specifically for interior flat and semigloss coatings. This environmentally friendly, new generation binder provides superior scrub resistance and stain removal charact...view more RayVace® 678 is an APEO and formaldehyde free vinyl acrylic emulsion polymer, designed specifically for interior flat and semigloss coatings. This environmentally friendly, new generation binder provides superior scrub resistance and stain removal characteristics. It exhibits excellent color acceptance and good compatibility with rheology modifiers. Suggested for use in interior architectural primers, interior architectural flats, and interior architectural semi gloss. view less | |
| RayKote® 1610 | Specialty Polymers | RayKote® 1610 is a low surfactant, styrene acrylic emulsion polymer which provides outstanding water resistance. It is specifically designed for coatings requiring early water resistance and adhesion to various substrates. Due to its low surfactant nature...view more RayKote® 1610 is a low surfactant, styrene acrylic emulsion polymer which provides outstanding water resistance. It is specifically designed for coatings requiring early water resistance and adhesion to various substrates. Due to its low surfactant nature, it exhibits good corrosion resistance in general industrial metal applications. Suggested for use in industrial primer for engineered wood, general industrial metal coatings, and low VOC primer. view less | |
| JONCRYL® PRO 1537 | BASF Dispersions & Resins | JONCRYL PRO 1537 is an ultra-fine particle size acrylic emulsion polymer for general and specialty purpose industrial finishing and architectural paints. It provides a unique balance of expected acrylic benefits along with many “alkyd-like” features not f...view more JONCRYL PRO 1537 is an ultra-fine particle size acrylic emulsion polymer for general and specialty purpose industrial finishing and architectural paints. It provides a unique balance of expected acrylic benefits along with many “alkyd-like” features not found in other emulsion polymers. JONCRYL PRO 1537 is recommended for applications such as interior/exterior general metal industrial coating applications and interior/exterior architectural coatings. view less | |
| RAYKOTE® 2000 | Specialty Polymers, Inc. | RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. R...view more RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. RAYKOTE® 2000 is a formulated coating that is able to adhere wet and dry to galvanized, aluminum, wood and aged alkyd enamel materials. view less | |
| RayCryl® 1859 | Specialty Polymers | RayCryl® 1859 is a high solids 100% acrylic emulsion polymer that develops a medium flexible film that can be used for domestic or industrial textile fabric coatings. Is apart of a self crosslinking and carboxyl group. Features a medium flexible free film...view more RayCryl® 1859 is a high solids 100% acrylic emulsion polymer that develops a medium flexible film that can be used for domestic or industrial textile fabric coatings. Is apart of a self crosslinking and carboxyl group. Features a medium flexible free film, is an excellent foamer, APEO free, can be filled with clay, starch or calcium carbonate, and has outstanding UV resistance and film clarity. view less | |
| RAYFLEX® 2024 | Specialty Polymers, Inc. | RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has el...view more RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has elongated tensile strength and has low temperature flexibility. The primary use of this product is to be applied to outdoor roofing and provide durability and UV protection. view less | |
| RayCryl® 775 | Specialty Polymers | RayCryl® 775 is a high performance all acrylic emulsion polymer designed for industrial wood and concrete applications. Coatings formulated with RayCryl® 775 provide excellent adhesion and have outstanding durability. The chemistry in RayCryl® 775 allows ...view more RayCryl® 775 is a high performance all acrylic emulsion polymer designed for industrial wood and concrete applications. Coatings formulated with RayCryl® 775 provide excellent adhesion and have outstanding durability. The chemistry in RayCryl® 775 allows it to crosslink with zinc; in addition the polymer is compatible with polyurethane dispersions. These features can increase both the chemical resistance and performance properties of coatings formulated with RayCryl® 775. view less | |
| Hycar® FF 26916 | Lubrizol Advanced Materials, Inc. | Hycar® FF 26916 is a formaldehyde and APE-free acrylic emulsion polymer that provides outstanding dry and wet physical properties when used as a binder to saturate paper, glass and polyester substrates without formaldehyde emissions. It also provides good...view more Hycar® FF 26916 is a formaldehyde and APE-free acrylic emulsion polymer that provides outstanding dry and wet physical properties when used as a binder to saturate paper, glass and polyester substrates without formaldehyde emissions. It also provides good solvent resistance to saturated substrates. Hycar FF 26916 can also be used in coating applications requiring superior high solids formulation stability and excellent scrub resistance. view less | |
| Hycar® FF 26921 | Lubrizol Advanced Materials, Inc. | Hycar® FF 26921 is a formaldehyde free* acrylic emulsion polymer that provides outstanding hot-dry, hot-wet tensile properties and good solvent resistance without the formaldehyde emissions. Hycar® FF26921 has performance exceeding traditional formaldehy...view more Hycar® FF 26921 is a formaldehyde free* acrylic emulsion polymer that provides outstanding hot-dry, hot-wet tensile properties and good solvent resistance without the formaldehyde emissions. Hycar® FF26921 has performance exceeding traditional formaldehyde containing acrylic polymers used alone or with external cross-linkers. Hycar® FF 26921 emulsion is suggested for use as a saturant for glass and polyester fiber filter media and glass building mat products. view less | |
| Ottopol K-672 | Gellner Industrial, LLC | Ottopol K-672 is a hydroxyl functional cationic acrylic emulsion polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. The fastest and most resistant coating can be formulated with the combination of polyisocyana...view more Ottopol K-672 is a hydroxyl functional cationic acrylic emulsion polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. The fastest and most resistant coating can be formulated with the combination of polyisocyanate and an epoxy silane. We recommend a maximum of 11.5% epoxy silane based on solids. Detergents and cleaners will not remove this film. Water resistance is excellent. The dried film will also resist staining. view less | |
| RayTech® 360 | Specialty Polymers | RayTech® 360 is a surfactant free, styrene acrylic emulsion polymer designed to improve water and blush resistance of a coating. Other key features include outstanding block resistance, and low VOC formulations. Due to its small and narrow particle size d...view more RayTech® 360 is a surfactant free, styrene acrylic emulsion polymer designed to improve water and blush resistance of a coating. Other key features include outstanding block resistance, and low VOC formulations. Due to its small and narrow particle size distribution, it provides excellent penetration into porous substrates like wood and concrete. Suggested for use as a sealer for wood and concrete, and water proofer for decks and concrete. view less | |
| RayRez® 117 | Specialty Polymers | RayRez® 117 is a film forming acrylic emulsion polymer for graphic arts applications. It has high clarity, excellent gloss and ink transfer properties. RayRez® 117 can be used in high performance inks and overprint varnishes for plastic film and plastic b...view more RayRez® 117 is a film forming acrylic emulsion polymer for graphic arts applications. It has high clarity, excellent gloss and ink transfer properties. RayRez® 117 can be used in high performance inks and overprint varnishes for plastic film and plastic board. RayRez® 117 is suitable for formulation of inks in flexographic, gravure and roll coater applications. Also features outstanding water resistance, and excellent compatibility with different pigment color dispersions. view less | |
| RayRez® 254 | Specialty Polymers | RayRez® 254 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has excellent rub resistance and ink transfer properties. RayRez® 254 can be used in regular inks for paper and corrugated board...view more RayRez® 254 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has excellent rub resistance and ink transfer properties. RayRez® 254 can be used in regular inks for paper and corrugated board especially for kraft paper and kraft paper board. RayRez® 254 is suitable for formulation of ink in flexographic, gravure and roll coater applications. Also features fast drying times. view less | |
| RAYFLEX® 777 | Specialty Polymers, Inc. | RAYFLEX® 777 is an anionic APEO and formaldehyde free, self-crosslinking fully acrylic emulsion polymer. This product is intended for flexible roof coatings. The formulation of RAYFLEX® 777 exhibits water, efflorescence and UV resistance. It has low tempe...view more RAYFLEX® 777 is an anionic APEO and formaldehyde free, self-crosslinking fully acrylic emulsion polymer. This product is intended for flexible roof coatings. The formulation of RAYFLEX® 777 exhibits water, efflorescence and UV resistance. It has low temperature flexibility and tensile properties that adhere to polyurethane foam and different construction substrates. RAYFLEX® 777 primary uses are to coat construction roofs and provide UV protection, water resistance and temperature flexibility. view less | |
| RayRez® 169 | Specialty Polymers | RayRez® 169 is a soft film forming styrene acrylic emulsion polymer for graphic arts applications. It has outstanding resolubility, very good water resistance, excellent gloss, and ink transfer property. Features great adhesion to high and low density pol...view more RayRez® 169 is a soft film forming styrene acrylic emulsion polymer for graphic arts applications. It has outstanding resolubility, very good water resistance, excellent gloss, and ink transfer property. Features great adhesion to high and low density polyethylene. RayRez® 169 can be used in high performance inks and overprint varnishes for plastic film and plastic board. RayRez® 169 is suitable for formulation of inks in flexographic, gravure and roll coater formulations. view less | |
| RayRez® 168A | Specialty Polymers | RayRez® 168A is a soft film forming acrylic emulsion polymer for graphic arts applications. It has excellent resolubility, great water resistance, excellent gloss, and outstanding ink transfer properties. RayRez® 168A can be used in high performance inks ...view more RayRez® 168A is a soft film forming acrylic emulsion polymer for graphic arts applications. It has excellent resolubility, great water resistance, excellent gloss, and outstanding ink transfer properties. RayRez® 168A can be used in high performance inks and over printing varnish for plastic film and plastic board. RayRez® 168A is suitable for formulation of inks in flexographic, gravure and roll coater applications. Other key features include excellent adhesion, and high transparence. view less | |
| RayRez® 182D | Specialty Polymers | RayRez® 182D is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss, outstanding pH stability, and ink transfer properties. RayRez® 182D can be used in high performance inks and over print...view more RayRez® 182D is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss, outstanding pH stability, and ink transfer properties. RayRez® 182D can be used in high performance inks and over printing varnish for paper and corrugated board. RayRez® 182D is suitable for formulation of inks in flexographic, gravure and roll coater applications. Other key features include outstanding resolubility, while remaining cost effective. view less | |
| RayCryl® 1850 | Specialty Polymers | RayCryl® 1850 is a self crosslinking 100% acrylic emulsion polymer designed for textile applications such as foam, pad, spray, knife, and roller coatings. RayCry® 1850 exhibits medium flexible free film which produces medium hand with excellent strength. ...view more RayCryl® 1850 is a self crosslinking 100% acrylic emulsion polymer designed for textile applications such as foam, pad, spray, knife, and roller coatings. RayCry® 1850 exhibits medium flexible free film which produces medium hand with excellent strength. RayCryl® 1850 has good compatibility with melamine to enhance durability. RayCryl® 1850 provides outstanding pigment compatibility and pigment binding capacity which can be used in deep color applications. Has outstanding UV resistance. view less | |
| RayFlex® 613 | Specialty Polymers | RayFlex® 613 is a high solids, high performance, all acrylic emulsion polymer. Specifically designed for wall mastics, caulks, sealants, chinking compounds and roof coatings applications, RayFlex® 613 can be formulated at a higher volume solids, and with ...view more RayFlex® 613 is a high solids, high performance, all acrylic emulsion polymer. Specifically designed for wall mastics, caulks, sealants, chinking compounds and roof coatings applications, RayFlex® 613 can be formulated at a higher volume solids, and with high pigment loads. Coatings formulated with RayFlex® 613 have excellent flexibility and crack resistance, exhibit less shrinkage, and provide outstanding joint movement capability. Other key features include outstanding adhesion, and superior exterior durability. view less | |
| RayRez® 182A | Specialty Polymers | RayRez® 182A is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss and good ink transfer properties. RayRez® 182A can be used in high performance inks and over printing varnish for paper ...view more RayRez® 182A is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss and good ink transfer properties. RayRez® 182A can be used in high performance inks and over printing varnish for paper and corrugated board. RayRez® 182A is suitable for formulation of inks in flexographic, gravure and roll coater applications. Other key features include outstanding resolubility, and fast dry times while remaining cost effective. view less | |
| RayRez® 256 | Specialty Polymers | RayRez® 256 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has outstanding rub resistance, excellent pH stability and ink transfer properties. RayRez® 256 can be used in regular inks for ...view more RayRez® 256 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has outstanding rub resistance, excellent pH stability and ink transfer properties. RayRez® 256 can be used in regular inks for paper and corrugated board especially for kraft paper and kraft paper board. RayRez® 256 is suitable for formulation of ink in flexographic, gravure and roll coater applications. Other key features also include fast drying times, and good hiding power. view less | |
| Ottopol KX-99 | Gellner Industrial, LLC | Ottopol KX-99 is a translucent hydroxyl functional cationic acrylic emulsion polymer. It will cross-link at room temperature with polyisocyanates and epoxy silanes. This combination formulates the fastest and most resistant coating. The ambient curing hap...view more Ottopol KX-99 is a translucent hydroxyl functional cationic acrylic emulsion polymer. It will cross-link at room temperature with polyisocyanates and epoxy silanes. This combination formulates the fastest and most resistant coating. The ambient curing happens very quickly, in 15 minutes the film will have excellent water resistance. Allowing the film to cure for four hours will result in a film that has over 100 double rubs acetone resistance and also resists staining. Detergents and cleaners will not remove this film. view less | |
| Ottopol KX-101 | Gellner Industrial, LLC | Ottopol KX-101 is a translucent hydroxyl functional cationic acrylic emulsion polymer. It will cross-link at room temperature with polyisocyanates and epoxy silanes. This combination formulates the fastest and most resistant coating. The ambient curing ha...view more Ottopol KX-101 is a translucent hydroxyl functional cationic acrylic emulsion polymer. It will cross-link at room temperature with polyisocyanates and epoxy silanes. This combination formulates the fastest and most resistant coating. The ambient curing happens very quickly, in 15 minutes the film will have excellent water resistance. Allowing the film to cure for four hours will result in a film that has over 100 double rubs acetone resistance and also resists staining. Detergents and cleaners will not remove this film. Ottopol KX-101 is still in the experimental stage. view less | |
| RayCryl® 4108 | Specialty Polymers | RayCryl® 4108 is an APEO-free, self crosslinking acrylic emulsion polymer designed to provide outstanding performance properties for industrial and architectural finishes. Suggested uses include concrete stains and sealers, floor paint, and industrial woo...view more RayCryl® 4108 is an APEO-free, self crosslinking acrylic emulsion polymer designed to provide outstanding performance properties for industrial and architectural finishes. Suggested uses include concrete stains and sealers, floor paint, and industrial wood finishes. Coatings made with RayCryl® 4108 will provide high gloss, exceptional early water and blush resistance and clarity. Additionally, coatings made with RayCryl® 4108 have superior mar and scratch resistance and minimal grain raise. Other key features include excellent stain and hot tire pick up resistance, superior adhesion and UV properties, outstanding UV and exterior durability, high gloss, and is compatible with PUDs. view less | |
| E-SPERSE® 700 | Ethox Chemicals | E-SPERSE® 700 is a yellow liquid for emulsion polymerization. The nonionic surfactants, E-Sperse® 700 and 703, vary in their ethoxylation level and thus their hydrophile-lipophile balance or HLB. Matching the HLB of the emulsifier to the monomers and to t...view more E-SPERSE® 700 is a yellow liquid for emulsion polymerization. The nonionic surfactants, E-Sperse® 700 and 703, vary in their ethoxylation level and thus their hydrophile-lipophile balance or HLB. Matching the HLB of the emulsifier to the monomers and to the polymer is critical for optimal emulsion properties. The choice of the proper one for your emulsion polymer system can best be determined by experimentation. E-Sperse® 700 and 703 nonionic polymerization surfactants may also be used in conjunction with other commonly utilized nonionic or anionic surfactants to produce smaller particle size emulsions. The E-Sperse® series emulsifiers are much lower foaming than traditional alkylphenol ethoxylates so lower levels of defoamers are necessary in the polymerization process. view less | |
| E-SPERSE® 703 | Ethox Chemicals | E-SPERSE® 703 is a nonionic surfactant with excellent chemical stability. The nonionic surfactants, E-Sperse® 700 and 703, vary in their ethoxylation level and thus their hydrophile-lipophile balance or HLB. Matching the HLB of the emulsifier to the monomers and to the polymer is critical for optimal emulsion properties. The choice of the proper one for your emulsion polymer...view more E-SPERSE® 703 is a nonionic surfactant with excellent chemical stability. The nonionic surfactants, E-Sperse® 700 and 703, vary in their ethoxylation level and thus their hydrophile-lipophile balance or HLB. Matching the HLB of the emulsifier to the monomers and to the polymer is critical for optimal emulsion properties. The choice of the proper one for your emulsion polymer system can best be determined by experimentation. E-Sperse® 700 and 703 nonionic polymerization surfactants may also be used in conjunction with other commonly utilized nonionic or anionic surfactants to produce smaller particle size emulsions. The E-Sperse® series emulsifiers are much lower foaming than traditional alkylphenol ethoxylates so lower levels of defoamers are necessary in the polymerization process. view less | |
| VISIOMER® MEEU 50 W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 50 W is an ureido methacrylate 50% in water. It is designed to improve wet adhesion properties of emulsion polymers and wet scrub resistance of the final products. | |
| Cola®Tex 127 | Colonial Chemical, Inc. | Cola®Tex 127 is a predominately naturally-derived blend of functionalized alkyl poly glucosides (APG) and anionic surfactants. Cola®Tex 127 is used in the creation of emulsion polymers. | Request Sample |
| AGITAN® A202E | Munzing Chemie | AGITAN® A202E is a liquid opaque off-white blend of special wax and mineral oil. It is a defoamer that is designed for use in emulsion polymers and various different adhesives, such as laminating, packaging, envelope, and construction adhesives. | |
| Troysol™ LAC | Arxada – Troy Corporation | Troysol™ LAC is a multipurpose, silicone-free wetting additive that improves substrate wetting, system flow and leveling, adhesion, gloss and color uniformity in aqueous coatings, adhesive products, inks, construction products and emulsion polymers. | Request Sample |
| VISIOMER® C18 PEG 1105 MA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® C18 PEG 1105 MA W is a polar methacrylate monomer in water and GMAA. It consist of a hydrophylic backbone with side chains that end in a hydrophobic group . Ideal for use as associative polymeric thickener in emulsion polymers. | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...view more Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. view less | |
| CYMEL® 385 | Allnex | CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide...view more CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide functionality. It has a high tendency to self-condense and may be used to increase the hardness and resistance properties of thermoplastic waterborne polymers. view less | Request Sample |
| Emulsogen® SF 8 | Clariant - Coatings & Construction Chemicals | Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can al...view more Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can also be used as a cake dewatering aide and as a wetting agent for aqueous, VOC-free paints and coatings. view less | |
| WorléeAdd 604 N | Worlée-Chemie G.m.b.H. | WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with various emulsion polymer...view more WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with various emulsion polymers. The product can be directly dispersed into aqueous systems and can be used in basic as well as in acidic lacquers. Sufficient shear forces should be used. view less | |
| DEE FO® PI-40 | Munzing Chemie | DEE FO® PI-40 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is commonly used in combination with defoaming persistence and pinhole free substrate wetting. It is commonly used in printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. It is also used in OPV, emulsion polymer...view more DEE FO® PI-40 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is commonly used in combination with defoaming persistence and pinhole free substrate wetting. It is commonly used in printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. It is also used in OPV, emulsion polymers, industrial paints, wood coatings, and adhesives. view less | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...view more Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. view less | |
| Emulsogen® TS 600 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 600 improves the compatibility of pigments and minerals with polymers and binders. It prevents skinning of emulsion polymer...view more Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 600 improves the compatibility of pigments and minerals with polymers and binders. It prevents skinning of emulsion polymers in paints and improves the shelf life and stability of emulsion paints. view less | |
| OMBRELUB RA | Munzing Chemie | OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastif...view more OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. As OMBRELUB RA is nearly colourless it can be perfectly used in clear coats and white lacquers. Main applications include strippable coatings, transport protection coatings, hobby paints, and coatings for spray booths. view less | |
| Emulsogen® LCN 287 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen®...view more Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen® LCN 287 improves the shear, temperature and electrolyte stability of polymer dispersions. It is used as a dispersing agent for inorganic and organic pigments in aqueous pigment preparations. Emulsogen® LCN 287 is used for aqueous paints and coatings as a dispersing agent and stabilizer to improve the compatibility of pigments with polymers. It prevents skinning of aqueous coatings e.g. in textile coaitngs with emulsion polymers. This product is also used as an emulsifier for aqueous emulsions of alkyd resins. view less | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...view more Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. view less | |
| Bisomer® PEM63P HD | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PEM63P HD is an ethylene oxide / propylene oxide block co-polymer and its hydroxyl functional group is essentially secondary. It is non-toxic and has an EINECS “Polymer” classification. This product has an inhibitor (MEHQ) content of 500-800ppm, an acid number of 0.3mg KOH/g max., and a hydroxyl value of 100-120mgKOH/g. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticizing properties when incorporated into polymers. Due to the positioning of its hydrophilic and hydrophobic components, Bisomer® PEM63P HD is ideal in the preparation of emulsion polymer...view more Bisomer® PEM63P HD is an ethylene oxide / propylene oxide block co-polymer and its hydroxyl functional group is essentially secondary. It is non-toxic and has an EINECS “Polymer” classification. This product has an inhibitor (MEHQ) content of 500-800ppm, an acid number of 0.3mg KOH/g max., and a hydroxyl value of 100-120mgKOH/g. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticizing properties when incorporated into polymers. Due to the positioning of its hydrophilic and hydrophobic components, Bisomer® PEM63P HD is ideal in the preparation of emulsion polymers for use in pigment dispersing resins and polyurethane dispersions (PUDs). Bisomer® PEM63P HD is an ideal candidate as a polymerisable surfactant in associative thickeners. view less | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymer...view more Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. view less |
