| ZOLDINE® MS-PLUS | ANGUS Chemical Company | ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials use...view more ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials used in most polyurethane and polyurea systems. This product will also alleviate the detrimental effects of humidity in the cast or spray application of two-component polyurethane and polyurea systems. view less | |
| ZOLDINE MS-PLUS | Univar Solutions | ZOLDINE MS-PLUS is a low viscosity oxazoldine moisture scavenger which reacts fast, alleviating detrimental effects caused by humidity in two-component polyurethane and polyurea systems. | Request Sample |
| Vinyltrimethoxysilane | Dalian Onichem Co., Ltd. | Vinyltrimethoxysilane is a cross-linking agent for PE. This product is used as a moisture scavenger as well as a coupling agent for unsaturated polyesters. | Request Sample |
| Gasil® GM2 | PQ Corporation | Gasil® GM2 is a silica gel specifically designed as a moisture scavenger / degassing agent for aluminum paints and as a free-flow agent in powder coatings. | |
| Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
| Tytan S2 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of sil...view more Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of silicone base ink. view less | |
| Tytan S22 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rat...view more Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rate of silicone base ink. view less | |
| Gasil® GM2F | PQ Corporation | Gasil® GM2F is a specialty silica gel utilized as a moisture scavenger and as a free-flow agent. This product of silicon dioxide complies with current FCC (Food Chemicals Codex) and USP (US Pharmacopeia) standards and is acceptable for use as a food addi...view more Gasil® GM2F is a specialty silica gel utilized as a moisture scavenger and as a free-flow agent. This product of silicon dioxide complies with current FCC (Food Chemicals Codex) and USP (US Pharmacopeia) standards and is acceptable for use as a food additive in accordance with 21CFR172.480. view less | |
| SYLOSIV® A 300 | Univar Solutions | SYLOSIV® A 300 is a highly effective moisture scavenger for such plastic and coating systems where small traces of water may create problems. Due to its small pore openings SYLOSIV® A 300 adsorbs practically only water. Typical areas of application are tw...view more SYLOSIV® A 300 is a highly effective moisture scavenger for such plastic and coating systems where small traces of water may create problems. Due to its small pore openings SYLOSIV® A 300 adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems. view less | Request Sample |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...view more Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). view less | |
| SYLOSIV® A 10 | Univar Solutions | SYLOSIV® A 10 is a highly effective moisture scavenger used in metallic pigment coatings (zinc-rich primers, aluminium paints). Due to its large pore openings SYLOSIV® A 10 can not only adsorb water, but also much larger molecules. As an example it is the...view more SYLOSIV® A 10 is a highly effective moisture scavenger used in metallic pigment coatings (zinc-rich primers, aluminium paints). Due to its large pore openings SYLOSIV® A 10 can not only adsorb water, but also much larger molecules. As an example it is therefore applied as a carrier for anti-foulings in marine paints. view less | Request Sample |
| SYLOSIV® A 4 | Univar Solutions | SYLOSIV® A 4 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve - with pore openings of approximately 4 Å. This product is a highly effective moisture scavenger for plastic and coating systems where even traces ...view more SYLOSIV® A 4 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve - with pore openings of approximately 4 Å. This product is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Typical areas of application are two-component polyurethane systems (coatings, adhesives, sealants) and metallic pigment coatings (zinc-rich primers, aluminium paints). view less | Request Sample |
| SYLOSIV® A 4 | GRACE | SYLOSIV® A 4 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve - with pore openings of approximately 4 Å. This product is a highly effective moisture scavenger for plastic and coating systems where even traces ...view more SYLOSIV® A 4 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve - with pore openings of approximately 4 Å. This product is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Typical areas of application are two-component polyurethane systems (coatings, adhesives, sealants) and metallic pigment coatings (zinc-rich primers, aluminium paints). view less | |
| Incozol 2 | Incorez Ltd. | Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and...view more Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content. view less | |
| SYLOSIV® A 3 | Univar Solutions | SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may crea...view more SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less | Request Sample |
| SYLOSIV® A 3 | GRACE | SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may crea...view more SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less | |
| SYLOSIV® K 300 | GRACE | SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water ...view more SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® K 300 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less | |
| Aldirez BH | Incorez Ltd. | Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where ...view more Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where it is used to prevent gassing in sealant and adhesive applications. view less | |
| Incozol 4 | Incorez Ltd. | Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it i...view more Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it is normally used with aliphatic prepolymers. In two component systems it can also be used with aromatic prepolymers or isocyanates. view less | |
| Luna PTSI P | DKSH | Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against det...view more Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against deterioration and discoloration. The use of Luna PTSI P in the formulation process prevents moisture-related problems. Luna PTSI P reacts rapidly with excess water to form the corresponding carbamic acid, which in turn, undergoes immediate decomposition to form carbon dioxide and non-reacting p-toluenesulfonamide. This product is available in Europe, Asia and North America. view less | Request Sample |
| Tytan S6 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increa...view more Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increase the curing rate of silicone base ink. view less | |
| Additive OF | Borchers, A Company of OMG | Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally co...view more Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally compatible with polyol and isocyanate products. However, storage stability is not assured in all combinations. Its suitability for individual applications must be tested carefully. It is suitable for solventborne polyurethane coatings and can be added both to the polyol component and to the isocyanate component. view less | |
| Additive TI | Borchers, A Company of OMG | Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI ...view more Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI is used for dehydration of solvents, fillers, pigments and bituminous tars. It rapidly reacts with water and generates carbon dioxide and toluenesulfonamide which is generally inert towards further reaction with alkyl and aryl isocyanates, and is usually soluble in common coating solvents. This product does not cause further film yellowing. Application of Additive TI in a polyurethane coating formulation, prevents moisture-related problems such as gloss reduction, haze, yellowing and reaction foam. It can also react with other active hydrogen compounds, such as alcohols, phenols, amines, amides and so on. This product eliminates moisture introduced with solvents, pigments, and fillers in 1-component as well as in classical 2-component PU systems. view less | |
| Silica Gel White | Qingdao Sun Chemical Corporation Limited | Silica Gel White is a transparent or translucent glass-like pellet or lump that is mainly used for drying and moisture proof, may also be used as catalyst carriers, adsorbents, separators and variable-pressure adsorbents, etc. | |
| Gasil® 200DF | PQ Corporation | Gasil® 200DF is a fine particle silica gel with exceptional moisture adsorption properties suitable for use in drafting film coatings or as a degassing agent in aluminum based coatings. | |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
