| Waterbased UV-Curable Satin Topcoat (Formulation #SPF_CTG_017_2203) | Arkema Rheology & Specialty Additives | This waterbased top coat features Coapur™ 2025 and Coadis™ 790. | |
| BYD6008 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6008, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it attaches to layers well. It is non toxic and the end product will have a high gloss. | |
| BYD6009 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6009, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it attaches to layers well. It is non toxic and the end product will have a high gloss. | |
| BYD6010 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6010, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it wets underlying substrates well. It is non toxic and the end product will have a high gloss. | |
| Relca® UV-628 | Stahl Polymers | Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good...view more Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good scratch resistance properties, and is tack free before UV curing. This product is used in applications that need to be dried prior to EB/UV curing, and requires the addition of a photoinitiator to ensure proper curing. view less | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones | DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent i...view more DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. view less | |
| UCECOAT® 2803 | Allnex | UCECOAT® 2803 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionically stabilized in water without any external emulsifier. It is not stable under acidic conditions. This product contains no co-...view more UCECOAT® 2803 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionically stabilized in water without any external emulsifier. It is not stable under acidic conditions. This product contains no co-solvent and exhibits favorable ink jetting properties associated with its water resolubility before cure. UCECOAT® 2803 provides hard cured coating along with good stain and chemical resistance. view less | Request Sample |
| Hauthane L-3415 | Hauthaway | Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include auto...view more Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring. L-3415 may be applied by spray or gravure methods. Films must be dried completely before UV energy cure. view less | |
| SpeedCure KEM | Sartomer Americas | SpeedCure KEM is photoinitiator emulsion with absorption maxima at 260 nm, 290 nm and 370nm. SpeedCure KEM provides high reactivity when used at 2-10 wt% in waterbased UV and LED curable formulations. | |
| ADDITOL® XW 6591 | Allnex | ADDITOL® XW 6591 is a water dilutable, modified polyester-acrylate polymer. It can be used for colour- and shading pigment pastes. It is compatible with waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV- curing systems, PU- dispersio...view more ADDITOL® XW 6591 is a water dilutable, modified polyester-acrylate polymer. It can be used for colour- and shading pigment pastes. It is compatible with waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV- curing systems, PU- dispersions and plastic dispersions. view less | Request Sample |
| UROTUF® E300-W-40 | Polynt Composites | UROTUF® E300-W-40 is an UV-curable waterborne urethane resin. This product is solvent-free and offers a quick dry with high hardness, high gloss, chemical resistance and good durability. IT can be used in UV-curable coatings, wood coatings, and plastic co...view more UROTUF® E300-W-40 is an UV-curable waterborne urethane resin. This product is solvent-free and offers a quick dry with high hardness, high gloss, chemical resistance and good durability. IT can be used in UV-curable coatings, wood coatings, and plastic coatings. view less | |
| EFKA® PX 4701 | BASF Formulation Additives | EFKA® PX 4701 is a 100 % active dispersant of the acrylic block co-polymer family made by Controlled Free Radical Polymerization. It is well suitable for UV- curable, solvent- and water-based ink formulations. It is especially recommended for high-perform...view more EFKA® PX 4701 is a 100 % active dispersant of the acrylic block co-polymer family made by Controlled Free Radical Polymerization. It is well suitable for UV- curable, solvent- and water-based ink formulations. It is especially recommended for high-performance systems such as inkjet inks, UV- curable and water-based flexographic inks. view less | |
| ORDISOL SWT-33 | Concentrol, S.A., Productos | ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV ...view more ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV curing systems. In all the previous applications offers a strong decrease of the surface tension. view less | |
| SpeedCure TEM | Sartomer Americas | SpeedCure TEM is a stable photoinitiator emulsion with absorption maxima at 260 nm and 370nm. SpeedCure TEM provides high reactivity, improved cured film properties and enhanced formulation compatibility when used at 2-10 wt% in waterbased UV and LED cura...view more SpeedCure TEM is a stable photoinitiator emulsion with absorption maxima at 260 nm and 370nm. SpeedCure TEM provides high reactivity, improved cured film properties and enhanced formulation compatibility when used at 2-10 wt% in waterbased UV and LED curable formulations. view less | |
| Siltech®C-1910 | Siltech Corp. | Siltech®C-1910 is a liquid fluorinated silicone polyether. The fluoro pendant moiety gives slip and foam control in radiation curing, UV curing, and water-based inks and coatings. | |
| ADDITOL® XW 6528 | Allnex | Additol® XW 6528 is a water dilutable grinding medium which can be used for colour- and shading pigment pastes. It is compatible in waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV curing systems, anodic deposition dipping lacquers,...view more Additol® XW 6528 is a water dilutable grinding medium which can be used for colour- and shading pigment pastes. It is compatible in waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV curing systems, anodic deposition dipping lacquers, PU- dispersions and plastic dispersions. Additol® XW 6528 is co-crosslinking in melamine and isocyanate curing systems. view less | Request Sample |
| OMNISTAB® UV 1130 | Partners in Chemicals | OMNISTAB® UV 1130 is a liquid hydrophilic benzotriazole-based UV absorber designed to meet high performance and excellent durability requirements in coatings, printing & packaging and adhesives & sealants. Universally applicable in solvent- and water-base...view more OMNISTAB® UV 1130 is a liquid hydrophilic benzotriazole-based UV absorber designed to meet high performance and excellent durability requirements in coatings, printing & packaging and adhesives & sealants. Universally applicable in solvent- and water-based coatings including UV-curable systems. view less | |
| UCECOAT® 2802 | Allnex | UCECOAT® 2802 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is no...view more UCECOAT® 2802 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. This product contains no co-solvent. UCECOAT® 2802 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2802 provides hardness in the polymerized coating along with good stain and chemical resistance. view less | Request Sample |
| UCECOAT® 2801 | Allnex | UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is no...view more UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. This product contains no co-solvent. UCECOAT® 2801 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2801 provides hardness in the polymerized coating along with good stain and chemical resistance. view less | Request Sample |
| UCECOAT® 7674 | Allnex | UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, i...view more UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under acidic conditions. UCECOAT 7674 contains no co-solvent. UCECOAT 7674 exhibits outstanding wetting of wood surfaces, imparting warmth and richness to the appearance of the wood. UCECOAT 7674 provides hardness in the polymerized coating along with good stain and chemical resistance. view less | Request Sample |
| Doublecure® 73W | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 73W is a water soluble non-yellowing photoinitiator. Such proprieties make it ideal for making photoinitiator blends or water borne UV curing. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. ...view more Doublecure® 73W is a water soluble non-yellowing photoinitiator. Such proprieties make it ideal for making photoinitiator blends or water borne UV curing. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. It is the first water solute able initiator to be used for non-yellowing clear coating. And because it is in liquid type and has good solvency properties, it is easier to handle and formulate. This yellowish to brown clear liquid is used to initiate polymerization of systems based on unsaturated acrylic monomers as reactive diluents. view less | |
| Anquamine® 287 Waterborne Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based pr...view more Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. view less | Request Sample |
| BYK®-UV 3500 | BYK | BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to crosslinking by acryl functionality. In non-aqueous radiation curable...view more BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to crosslinking by acryl functionality. In non-aqueous radiation curable systems BYK-UV 3500 gives excellent surface slip and tape release with permanent effect due to crosslinking by acryl functionality, as well as improved leveling. view less | Request Sample |
| Waterborne Epoxy Curing Agent SM6080 | Jiangsu Sanmu Group Corporation | SM6080 is an environmentally friendly and low viscosity aliphatic amine modified water-based epoxy curing agent. It has good toughness, good adhesion, low construction smell, good fullness and good water resistance, widely used in epoxy floor fields. | |
| Urethane Acrylate Dispersion SW 5200 | Soltech Ltd | Urethane Acrylate Dispersion SW 5200 is a urethane acrylate dispersion used in the manufacturing of UV curable paints,, aqueous radiation-curing coatings, primers, and top coatings. This product is designed to provide low viscosity, flexibility, clarity, ...view more Urethane Acrylate Dispersion SW 5200 is a urethane acrylate dispersion used in the manufacturing of UV curable paints,, aqueous radiation-curing coatings, primers, and top coatings. This product is designed to provide low viscosity, flexibility, clarity, scratch resistance, wetting properties, and fast curing. Urethane Acrylate Dispersion SW 5200 has a slightly colloidal and milky appearance with a viscosity of <300 at 25℃. view less | |
| EBECRYL® 4587 | Allnex | EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance...view more EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation of UV/EB energy curable waterborne coatings free of reactive diluents, solvents and amines, as clear or pigments systems in glossy or matt finishes. view less | Request Sample |
| K-CURE® 1040W | King Industries, Inc. | K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water sys...view more K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water systems. It is soluble in water, alcohol, and also glycols. This product can be applied to water based wood coatings, paper coatings, and printing inks. view less | |
| BYK-3560 | BYK | BYK-3560 is a silicone-free and fluorine-free surface additive for increasing the surface energy in aqueous, solvent-borne, UV-curable, and high-solid systems. It increases the surface energy of cured coatings overall, especially the polarity. This enable...view more BYK-3560 is a silicone-free and fluorine-free surface additive for increasing the surface energy in aqueous, solvent-borne, UV-curable, and high-solid systems. It increases the surface energy of cured coatings overall, especially the polarity. This enables the improved adhesion of subsequent layers such as paint, laminating foils, adhesives, and printing inks. The cured coating is also wetted more effectively, producing an excellent leveling of the subsequent coating. In addition, BYK-3560 also improves the leveling of the system in which it is being used. view less | Request Sample |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...view more Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. view less | |
| FOAMSTAR® SI 2210 NC | BASF Formulation Additives | FOAMSTAR® SI 2210 NC is a defoamer for non-pigmented and low-pigmented aqueous coatings, printing inks, adhesives and UV-curable systems. It has a spontaneous defoaming effect in low- and nonpigmented aqueous coatings. It is highly compatible, does not se...view more FOAMSTAR® SI 2210 NC is a defoamer for non-pigmented and low-pigmented aqueous coatings, printing inks, adhesives and UV-curable systems. It has a spontaneous defoaming effect in low- and nonpigmented aqueous coatings. It is highly compatible, does not separate out from the paint and has a good long-term efficiency. Aqueous wood coatings and overprint varnishes based on acrylic polymers are the preferential fields of application, but the defoamer is also suitable for contact adhesives. view less | |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...view more ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. view less | Request Sample |
| UV Cure 7155 | Epoxies, Etc. | UV Cure 7155 is a rigid, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and ...view more UV Cure 7155 is a rigid, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and thermal shock. UV Cure 7155 may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc. view less | |
| UV Cure 7156 | Epoxies, Etc. | UV Cure 7156 is a Flexible, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals a...view more UV Cure 7156 is a Flexible, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and thermal shock. UV Cure 7156 may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc. view less | |
| Chisorb® 292 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 292 is a liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This light yellowish liquid is suitable for coating applications such as: automotive coatings, coil coatings, wood strains or DIY paints, UV/EB coatings, one and two component PU, thermoplastic acrylics, thermosetting acryslics, alkyds, and polyesters, waterborne acrylics, phenolics, vinylics and UV curable...view more Chisorb® 292 is a liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This light yellowish liquid is suitable for coating applications such as: automotive coatings, coil coatings, wood strains or DIY paints, UV/EB coatings, one and two component PU, thermoplastic acrylics, thermosetting acryslics, alkyds, and polyesters, waterborne acrylics, phenolics, vinylics and UV curable acrylic. view less | |
| Epilink™ 360 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC...view more Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC epoxy coatings with handling and performance properties typical of solventborne formulations. view less | Request Sample |
| UV Cure 60-7170 | Epoxies, Etc. | UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 i...view more UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. view less | |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...view more Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. view less | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays goo...view more UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. view less | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...view more UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. view less | |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...view more EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. view less | Request Sample |
| EFKA® SL 3210 | BASF Formulation Additives | EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA® SL 3210 is relatively insensitive to pinholing - even at high concentrations of the additive. This clear, colorless liquid may be used in water-based, solvent-based and UV-curable printing inks and over-print varnishes. EFKA® SL 3210 is especially effective in nitrocellulose-based systems for flexographic and gravure printing. It is also effective in UV ...view more EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA® SL 3210 is relatively insensitive to pinholing - even at high concentrations of the additive. This clear, colorless liquid may be used in water-based, solvent-based and UV-curable printing inks and over-print varnishes. EFKA® SL 3210 is especially effective in nitrocellulose-based systems for flexographic and gravure printing. It is also effective in UV flexographic printing. view less | |
| UV Cure 60-7180 | Epoxies, Etc. | UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating...view more UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating on a wide variety of substrates. It can also be used in small potting applications as well as decorative clear doming on labels, pins, key fobs, magnets, etc. view less | |
| UV Cure 60-7156 | Epoxies, Etc. | UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is wate...view more UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. view less | |
| Gasil® HP710 | PQ Corporation | Gasil® HP710 is a synthetic amorphous silica. It can be used as a matting agent suitable for high solids and waterborne coatings with excellent performances in 100% UV curable formulations. | |
| Chisorb® 582L | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 582L is a reactable liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This product is suitable for the following coating applications: automotive coatings, UV coatings, wood strains or DIY paints and UV/EB coatings. As it is builds the polymer bond, it provides long term stability for coatings based on an acrylic and rubber matrix such as thermoplastic acrylics, thermosetting acrylics, and unsaturated polyesters, water-borne acrylics, vinylics, UV curable...view more Chisorb® 582L is a reactable liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This product is suitable for the following coating applications: automotive coatings, UV coatings, wood strains or DIY paints and UV/EB coatings. As it is builds the polymer bond, it provides long term stability for coatings based on an acrylic and rubber matrix such as thermoplastic acrylics, thermosetting acrylics, and unsaturated polyesters, water-borne acrylics, vinylics, UV curable acrylic, and rubber. view less | |
| RC 86 | CINKARNA | RC 86 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, aqueous and solvent flat paints, paper and wallpa...view more RC 86 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, aqueous and solvent flat paints, paper and wallpaper coatings, and silicon paints. view less | |
| Doublecure® 1819DW | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a d...view more Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a dispersion of Bis-Acyl-Phosphine Oxide in water. This white to slightly yellow liquid can be used in combinations with other photoinitiators such as Doublecure® 173. It can be used in UV curable formulations for clear or pigmented coatings on wood, metal, plastic, paper as well as for printing inks. In addition, it allows curing of thick sections due to the outstanding absorption. view less | |
| HALOX® RC-980 | ICL Phosphate Specialty | HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne...view more HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It shows a stable freeze cycle. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid. The dosage level is 3-6% for water-based coatings and 7-10% for solvent-based coatings as supplied on total formula weight. The shelf life of HALOX® RC-980 is 1 year. view less | Request Sample |
| Anquamine® 401 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 401 waterborne curing agent is a modified aliphatic amine supplied at 70% solids in water. It is intended for use with Liquid Epoxy Resin (EEW=190) and waterborne epoxy dispersions in two component, ambient-cure, waterborne epoxy coatings. An...view more Anquamine® 401 waterborne curing agent is a modified aliphatic amine supplied at 70% solids in water. It is intended for use with Liquid Epoxy Resin (EEW=190) and waterborne epoxy dispersions in two component, ambient-cure, waterborne epoxy coatings. Anquamine® 401 curing agent can also be utilized with different types of epoxy resin depending upon the properties desired. view less | Request Sample |
| BYK®-UV 3530 | BYK | BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueou...view more BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueous radiation curable systems leveling is improved. The surface tension, foam behavior or transparency are scarcely influenced. view less | Request Sample |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...view more Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. view less | |
| Anquamine® 419 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 c...view more Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primers, white gloss enamels and clear coats. It can be used with different solid epoxy resin dispersions depending upon the properties desired. view less | Request Sample |
| EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne...view more EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. view less | Request Sample |
| Ancamine® 2759 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotti...view more Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotting. Ancamine® 2759 curing agent can be used to formulate solvent-free topcoats or self leveling and screed floorings where high chemical resistance is required. The product is free of nonyl phenol. view less | Request Sample |
| 2036W | GIMEL Technical Materials | 2036W is a hexa functional waterborne aliphatic urethane acrylate used in waterborne coatings. It shows fast curing response, good gloss and film build, and high hardness and abrasion resistance. | Request Sample |
| Docure KH-721 | Kukdo Chemical Co., Ltd. | Docure KH-721 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-721 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. | |
| Docure KH-700 | Kukdo Chemical Co., Ltd. | Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is wel...view more Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. view less | |
| BYK-UV 3535 | BYK | BYK-UV 3535 is a crosslinkable surface additive for radiation curable systems for improving leveling and recoatability. It improves the leveling of radiation curable systems. The product is very compatible and causes no haze in the coating system. In many...view more BYK-UV 3535 is a crosslinkable surface additive for radiation curable systems for improving leveling and recoatability. It improves the leveling of radiation curable systems. The product is very compatible and causes no haze in the coating system. In many cases it displays a deaerating effect. Even at a low dosage it leads to an increase in surface tension. Associated with this are increased surface energy, improved recoatability and intercoat adhesion, even of aqueous systems. In addition, BYK-UV 3535 produces an anti-slip effect. The additive is UV reactive and displays crosslinking with radiation curable systems. For this reason its effect is long lasting and it does not migrate. BYK-UV 3535 is suitable for solvent-free, solvent-borne, and aqueous, radiation curable systems. view less | Request Sample |
| Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...view more Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. view less | Request Sample |
| C-1315 Cure and Seal (Formulation #EPS 2272 CS1) | EPS Materials | This is a C-1315 Cure and Seal (Formulation #EPS 2272 CS1). | |
| Epotec® THW 4501 | Aditya Birla | Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveli...view more Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveling and trowelable flooring applications. view less | |
| EPOTUF® 37-143 | Polynt Composites | EPOTUF® 37-143 is an aqueous dispersion of a liquid Bisphenol-A epoxy resin which when combined with EPOTUF® water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings. | |
| Telalit 180 | Spolchemie | Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispers...view more Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispersion. view less | |
| DAOTAN® VTW 6463/36WA | Allnex | Daotan® VTW 6463/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It has very good wetting properties, and quick curing to give clear crack-free films. | Request Sample |
| A-Cat 0040 | FTC Korea Co.,Ltd | A-Cat 0040 has excellent stability in solvent soluble and water-based thermosetting system, low temperature cure, and a fast cure time. It is used in general industries coatings. | Request Sample |
| Anquamine® 735 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Fo...view more Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Formulations based on Anquamine® 735 curing agent provide highly decorative functional floors without the requirement for plasticisers or solvents. view less | Request Sample |
| Anquamine® 731 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. ...view more Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine® 731 curing agent easily emulsifies standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins. view less | Request Sample |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | Request Sample |
| Anquamine® 728 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Anc...view more Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Ancarez® AR 555, and standard liquid epoxy resin. view less | Request Sample |
| Doublecure® 3959 | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white p...view more Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white powder is especially suited to applications where a low odor is desired, and for use in water-borne systems based on acrylate or unsaturated polyester resins. It is mainly used in UV curable formulation on substrates of wood, metal, plastic and paper. view less | |
| PLEXTOL™ R 5512 | Synthomer | Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings. Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance. It contributes a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV ...view more Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings. Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance. It contributes a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system. view less | |
| Docure KH-748 | Kukdo Chemical Co., Ltd. | Docure KH-748 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-748 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of waterborne coatings, ...view more Docure KH-748 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-748 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. view less | |
| Anquamine® 100 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curi...view more Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curing agent provides 6-8 hours pot life with liquid epoxy resins and addresses the typically short pot life of 1-2 hours from current two component, water-based systems. view less | Request Sample |
| BECKOPOX™ EH 613w/80WA | Allnex | Beckopox® EH 613W/80WA is a waterborne acetic acid free aliphatic polyamine adduct. It's a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
| UCECOAT® 6570 | Allnex | UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance ...view more UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance after curing by ultraviolet light (UV) or electron beam (EB). view less | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Beckopox® VEH 2849W/80WA is a waterborne acetic acid free aliphatic polyamine adduct that is a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
| KRONOS® 2090 | Kronos International, Inc. | KRONOS® 2090 is a rutile pigment ideal for applications such as wood finishes, interior powder coatings, UV-curing coatings, interior architectural and industrial coatings, as well as waterborne and solvent-based printing inks. This product is a universal...view more KRONOS® 2090 is a rutile pigment ideal for applications such as wood finishes, interior powder coatings, UV-curing coatings, interior architectural and industrial coatings, as well as waterborne and solvent-based printing inks. This product is a universal pigment combining very good optical properties and dispersing performance both in waterborne and solvent based systems with good gloss. view less | |
| BYK®-UV 3510 | BYK | BYK®-UV 3510 is a surface additive for radiation curing systems. It is a polyether modified polydimethylsiloxane. In non-aqueous systems BYK-UV 3510 improves substrate wetting and tape release as well as leveling, and increases surface slip. | Request Sample |
| NACURE® 8924 | King Industries, Inc. | NACURE® 8924 is an amine blocked sulfonic acid stimulant that is diluted with water for easier incorporation into water based systems. It appears as a clear, straw liquid, and has good cure response along with solubility in water-based systems. It is solu...view more NACURE® 8924 is an amine blocked sulfonic acid stimulant that is diluted with water for easier incorporation into water based systems. It appears as a clear, straw liquid, and has good cure response along with solubility in water-based systems. It is soluble in alcohols, glycols, glycol ethers, water and is insoluble in ketones, esters, aromatic and aliphatic hydrocarbons. This is a product that is normally applied in water-based coatings, wood coatings, and general industrials. view less | |
| Anquamine® 721 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC....view more Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete. view less | Request Sample |
| Epokukdo KDU-653 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-653 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653 is ge...view more Epokukdo KDU-653 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-653 depend on diluents, photo initiators, and additives. view less | |
| Epokukdo KDU-651 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-651 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-651 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651 is ge...view more Epokukdo KDU-651 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-651 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651 depend on diluents, photo initiators and additives. view less | |
| GENOMER* 7311 | Rahn USA Corp. | GENOMER * 7311 is completely water-soluble prior to cure. Recommended applications are additive manufacturing, coatings for wood, paper, metal and plastics, water-based inks and varnishes. | Request Sample |
| UCECOAT® 7210 | Allnex | UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasi...view more UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasion and chemical resistances. UCECOAT® 7210 can be blended (with prior pH adjustment if required) with other waterborne UV resins to increase solid content and/or flexibility. view less | Request Sample |
| PLEXTOL™ D 977 | Synthomer | PLEXTOL™ D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls. It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV s...view more PLEXTOL™ D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls. It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system. view less | |
| Epokukdo KDU-651TP75 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-651TP75 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651TP75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance an...view more Epokukdo KDU-651TP75 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651TP75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651TP75 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651TP75 depend on diluents, photo initiators, and additives. view less | |
| Epokukdo KDU-653M90 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-653M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and ...view more Epokukdo KDU-653M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653M90 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-653M90 depend on diluents, photo initiators, and additives. view less | |
| Epokukdo KDU-651M90 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-651M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and ...view more Epokukdo KDU-651M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651M90 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651M90 depend on diluents, photo initiators, and additives. view less | |
| Epokukdo KDU-652S75 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-652S75 diluted with 25wt.% styrene monomer is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-652S75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water res...view more Epokukdo KDU-652S75 diluted with 25wt.% styrene monomer is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-652S75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-652S75 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-652S75 depend on diluents, photo initiators, and additives. view less | |
| Epokukdo KDU-651T70 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-651T70 diluted with 30wt.% TMPTA is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651T70 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance an...view more Epokukdo KDU-651T70 diluted with 30wt.% TMPTA is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651T70 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651T70 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651T70 depend on diluents, photo initiators, and additives. view less | |
| CYMEL® 373 | Allnex | CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations. | Request Sample |
| NACURE® 2547 | King Industries, Inc. | NACURE® 2547 appears as a clear, transparent liquid and is an amine blocked para -Toluenesulfonic acid (p-TSA) stimulant that is diluted with water for easier incorporation into water-based systems. It offers good cure response and viscosity stability and...view more NACURE® 2547 appears as a clear, transparent liquid and is an amine blocked para -Toluenesulfonic acid (p-TSA) stimulant that is diluted with water for easier incorporation into water-based systems. It offers good cure response and viscosity stability and is usually applied in water-based general industrials. This product is soluble in alcohols, glycols, water, glycol ethers and it is insoluble in ketones, esters, aromatic and aliphatic hydrocarbons. view less | |
| CARBODILITE™ SV-02 | GSI Exim America, Inc. | CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion,...view more CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. view less | |
| EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...view more EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). view less | Request Sample |
| CYCAT® 4040 | Allnex | CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to...view more CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems. view less | Request Sample |
| Borchers® AF 0871 | Borchers, A Company of OMG | Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable ...view more Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable with water and efficient in most polymer dispersions. It is particularly suitable for highly filled pigmented systems and pigment pastes grinding. The efficiency is independent of the curing mechanism. Borchers® AF 0871 increases density during manufacturing process and application. It provides homogenous film built after application. It has been designed for use in water based emulsions and water-thinnable systems. The efficiency is proven in chemically curing systems based on polyurethanes (including acrylate modification) and acrylates (also hydroxyl bearing polyacrylates). view less | |
| Siltech® C-468 | Siltech Corp. | Siltech® C-468 is a 100% active carbinol functional polyether siloxane copolymer that is primarily used to improve flow and slip as well as providing anti-cratering and anti-blocking benefits. Siltech®C-468 is used in solvent-based, water-based and energy...view more Siltech® C-468 is a 100% active carbinol functional polyether siloxane copolymer that is primarily used to improve flow and slip as well as providing anti-cratering and anti-blocking benefits. Siltech®C-468 is used in solvent-based, water-based and energy curing coatings and ink formulations. view less | |
| BRB Siloen® WA 265 | BRB International BV | BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint...view more BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint varnishes. view less | |
| RHEOBYK-T 1010 VF | BYK | RHEOBYK-T 1010 VF is a VOC-free associative thickener (HEUR) for aqueous systems to generate Newtonian flow behavior. It is preferably used in emulsion paints and coatings that are based on acrylics, styrene acrylics and vinyl acetate copolymer binders as...view more RHEOBYK-T 1010 VF is a VOC-free associative thickener (HEUR) for aqueous systems to generate Newtonian flow behavior. It is preferably used in emulsion paints and coatings that are based on acrylics, styrene acrylics and vinyl acetate copolymer binders as well as PU and alkyd emulsions. It is also well suited for aqueous wood and furniture coatings based on PU, acrylics and UV-curing systems. view less | Request Sample |
| CYMEL® 328 | Allnex | CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations, such a...view more CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations, such as can and coil coatings, OEM and foil coating applications. view less | Request Sample |
