| Chrome Nitrate Solution, 8.5% Chrome | McGean-Rohco, Inc. | Chrome Nitrate Solution, 8.5% Chrome is used in catalysts, pigments, metal finishing, and catalyst applications. | |
| DABCO® NE 300 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 300 is a highly efficient low emissive blow catalyst suitable for replacement of BDMAEE catalysts. | |
| Chicure® TPP | Double Bond Chemical Ind., Co., Ltd. | Chicure® TPP is a widely used metal complex and phase transfer catalysts for organic and polymerization reactions. | |
| Mixed Chromium Phosphate | McGean-Rohco, Inc. | Mixed Chromium Phosphate is a clear, green solution. Uses include conversion coatings, corrosion inhibitors, catalysts and synthesis. | |
| Basic Chromic Sulfate Solution | McGean-Rohco, Inc. | Basic Chromic Sulfate Solution is a dark green solution. Uses include metal finishing, pigments, textile mordants, leather tanning, and catalysts. | |
| Chromic Acetate Solution | McGean-Rohco, Inc. | Chromic Acetate Solution is used in pigments, drilling muds, textile mordants, leather tanning, and as catalysts for oxidation, polymerization, and emulsion hardening. | |
| Chromium Tartrate Solution | McGean-Rohco, Inc. | Chromium Tartrate Solution is used as mordants in textile dyeing, chrome conversion coatings, hydrogenation catalysts and anti-foulants for oil field applications. | |
| DABCO® NE 1070 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1070 is a low emission gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. | |
| Basic Chromic Acetate Powder | McGean-Rohco, Inc. | Basic Chromic Acetate Powder is used in pigments, drilling muds, textile mordants, leather tanning, and as catalysts for oxidation, polymerization, and emulsion hardening. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| SNOWTEX® ST-ZL | Nissan Chemical America Corporation | SNOWTEX® ST-ZL is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The particle size of this product is at 90 µm. | Request Sample |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| DABCO® NE 1091 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1091 is a highly efficient low emissive gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. It can be used to improve humid aging properties. | |
| KRONOS® 6020 | Kronos International, Inc. | KRONOS® 6020 is a solution of titanium oxychloride in hydrochloric acid (25%). It is used for the production of pearlescent and other inorganic pigments. This product is also suitable for manufacturing catalysts. | |
| Chromium Acetylacetonate | McGean-Rohco, Inc. | Chromium Acetylacetonate is used in the preparation of organic chromium compounds, especially for use as catalysts. This compound is very soluble in most organic solvents including Isopropyl Alcohol, Toluene, Methanol, but this compound is not readily sol...view more Chromium Acetylacetonate is used in the preparation of organic chromium compounds, especially for use as catalysts. This compound is very soluble in most organic solvents including Isopropyl Alcohol, Toluene, Methanol, but this compound is not readily soluble in water. view less | |
| Strodex™ P-100 | Ashland | Strodex™ P-100 is recommended for use in water-reducible aklyd high-gloss enamel formulations to help stabilize the cobalt and zirconium drier-catalysts against hydrolysis and loss-of-dry activity at elevated pH levels. | |
| TIB KAT® 233S | TIB Chemicals | TIB KAT® 233S is applicable for catalysts in the manufacturing of polyurethanes, transesterification reactions, condensation reactions of RTV-silicone resins and silanes, and transesterification of polyacrylates. This product is supplied as a liquid and i...view more TIB KAT® 233S is applicable for catalysts in the manufacturing of polyurethanes, transesterification reactions, condensation reactions of RTV-silicone resins and silanes, and transesterification of polyacrylates. This product is supplied as a liquid and is slightly sensitive to moisture. view less | |
| DABCO® DC 1 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 1 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. | |
| BLS® 3035 | Mayzo, Inc. | BLS® 3035 is a solid cyanoacrylate-type UV absorber (UVA) and light stabilizer. It is inherently non-discoloring and is also chemically non-interacting with reactive monomers and polymerization catalysts. BLS® 3035 is used in adhesives and coatings. | |
| BLS® 3039 | Mayzo, Inc. | BLS® 3039 is a solid cyanoacrylate-type UV absorber (UVA) and light stabilizer. It is inherently non-discoloring and is also chemically non-interacting with reactive monomers and polymerization catalysts. BLS® 3039 is used in adhesives and coatings. | |
| K-KAT® XK-640 | King Industries, Inc. | K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the env...view more K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the environmental drawbacks. K-KAT® XK-640 is a designed to provide improved hydrolytic stability compared to other bismuth carboxylate catalysts. This product is soluble in glycol ethers, aliphatics, and aromatics, has partial solubility in alcohols and esters, and is insoluble in water. It appears as a clear, amber liquid, is 18% metal, and can be applied in ambient, force dry and bake systems, 2K and blocked isocyanate coatings, and in the production of urethane coatings. view less | |
| Cerium Octoate 12% | Patcham USA | Cerium Octoate 12% is a clear yellowish liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is very weak as an initiator at ambient temperatures and provides some through drying. | Request Sample |
| Dicyclohexylamine | Henan Harvest Chem Co., LTD. | Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insecticides, catalysts...view more Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insecticides, catalysts etc. view less | |
| Cobalt Neodecanoate 10% | Patcham USA | Cobalt Neodecanoate 10% is a clear blue violet liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is most powerful at ambient temperatures. Can lead to discoloration due to its purple color. | Request Sample |
| Cobalt Neodecanoate 12% | Patcham USA | Cobalt Neodecanoate 12% is a clear blue violet liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is most powerful at ambient temperatures. Can lead to discoloration due to its purple color. | Request Sample |
| Cobalt Octoate 8% | Patcham USA | Cobalt Octoate 8% is a clear blue-violet liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is most powerful at ambient temperatures. Can lead to discoloration due to its purple color. | Request Sample |
| Cobalt Octoate 10% | Patcham USA | Cobalt Octoate 10% is a clear blue-violet liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is most powerful at ambient temperatures. Can lead to discoloration due to its purple color. | Request Sample |
| Cobalt Octoate 12% | Patcham USA | Cobalt Octoate 12% is a clear blue-violet liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is most powerful at ambient temperatures. Can lead to discoloration due to its purple color. | Request Sample |
| TIB KAT® 620 | TIB Chemicals | TIB KAT® 620 is an effective catalyst for numerous applications. It is especially useful in polyurethane systems. This product shows a lower reactivity and longer potlife in 2p systems when compared to organotin catalysts. This zinc content of this produc...view more TIB KAT® 620 is an effective catalyst for numerous applications. It is especially useful in polyurethane systems. This product shows a lower reactivity and longer potlife in 2p systems when compared to organotin catalysts. This zinc content of this product is greater than or equal to 19.0%. view less | |
| AP-Cat 0043 | FTC Korea Co.,Ltd | AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and ...view more AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and PVC and general industrial coatings. view less | Request Sample |
| AP-Cat 0043L | FTC Korea Co.,Ltd | AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and ...view more AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and PVC and general industrial coatings. view less | Request Sample |
| Cobalt Neo 10% (In BD) | Patcham USA | Cobalt Neo 10% (In BD) is a clear violet liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is most powerful at ambient temperatures. Can lead to discoloration due to its purple color. | Request Sample |
| Cobalt Octoate 6% (In D80) | Patcham USA | Cobalt Octoate 6% (In D80) is a clear blue-violet liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is most powerful at ambient temperatures. Can lead to discoloration due to its purple color. | Request Sample |
| Cobalt Octoate 10% (In D80) | Patcham USA | Cobalt Octoate 10% (In D80) is a clear blue-violet liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is most powerful at ambient temperatures. Can lead to discoloration due to its purple color. | Request Sample |
| SNOWTEX® ST-50 | Nissan Chemical America Corporation | SNOWTEX® ST-50 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has viscosity of <50 mPa•s. It has applications as catalyst binders, textile treatments, polishing, binder for coasting, painting/coatings, refractory,...view more SNOWTEX® ST-50 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has viscosity of <50 mPa•s. It has applications as catalyst binders, textile treatments, polishing, binder for coasting, painting/coatings, refractory, anti-corrosion, and metal surface treatments. view less | Request Sample |
| SNOWTEX® ST-N | Nissan Chemical America Corporation | SNOWTEX® ST-N is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity <6 mPa•s. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic f...view more SNOWTEX® ST-N is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity <6 mPa•s. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatment. view less | Request Sample |
| DABCO® DC 2 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reac...view more DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reactive than DABCO® DC 1. view less | |
| SiSiB® PC5931 | SiSiB SILICONES | SiSiB® PC5931 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyolefin production with Zeigler-Natta catalysts...view more SiSiB® PC5931 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyolefin production with Zeigler-Natta catalysts. view less | |
| SiSiB® PC5932 | SiSiB SILICONES | SiSiB® PC5932 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyolefin production with Zeigler-Natta catalysts...view more SiSiB® PC5932 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyolefin production with Zeigler-Natta catalysts. view less | |
| TIB KAT® 616 | TIB Chemicals | TIB KAT® 616 is suitable for various applications in the catalysis of polyurethane systems. Compared to organotin catalysts, this product shows a lower activity offering longer pot life in 2p systems. It is especially useful in curing reactions at elevate...view more TIB KAT® 616 is suitable for various applications in the catalysis of polyurethane systems. Compared to organotin catalysts, this product shows a lower activity offering longer pot life in 2p systems. It is especially useful in curing reactions at elevated temperatures and in curing systems based on aromatic isocyanates. view less | |
| Cobalt Octoate 12% (In D 80) | Patcham USA | Cobalt Octoate 12% (In D 80) is a clear blue-violet liquid that acts as primary oxidation catalysts and works mainly on the surface of the wet film. It is most powerful at ambient temperatures. Can lead to discoloration due to its purple color. | Request Sample |
| KRONOS® 6091 | Kronos International, Inc. | KRONOS® 6091 is a solution of purified titanyl sulfate in sulfuric acid. It is well suited for the production of catalysts, pearlescent pigments, titanium metals and powders, paints and coatings, and pigments. This product can also has applications in the...view more KRONOS® 6091 is a solution of purified titanyl sulfate in sulfuric acid. It is well suited for the production of catalysts, pearlescent pigments, titanium metals and powders, paints and coatings, and pigments. This product can also has applications in the water treatment and petroleum industries. view less | |
| KRONOS® 6060 | Kronos International, Inc. | KRONOS® 6060 is a suspension of purified titanium dioxide (titanium hydrate white slurry) in sulfuric acid. Its TiO2 content ranges from 27-32% at a sulfuric acid concentration of 5%. This product can be used for applications such as catalysts or mixed me...view more KRONOS® 6060 is a suspension of purified titanium dioxide (titanium hydrate white slurry) in sulfuric acid. Its TiO2 content ranges from 27-32% at a sulfuric acid concentration of 5%. This product can be used for applications such as catalysts or mixed metal oxides. view less | |
| SNOWTEX® ST-40 | Nissan Chemical America Corporation | SNOWTEX® ST-40 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <25 mPa•s. It has applications as a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings,...view more SNOWTEX® ST-40 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <25 mPa•s. It has applications as a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings, refractory, anti-corrosion, and metal surface treatments. view less | Request Sample |
| SNOWTEX® ST-C | Nissan Chemical America Corporation | SNOWTEX® ST-C is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has as viscosity o <10 mPa•s. It has a applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorg...view more SNOWTEX® ST-C is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has as viscosity o <10 mPa•s. It has a applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatment. view less | Request Sample |
| High Purity Dispersible Nano Alumina-B8014 | Tianjin Boyuan New Materials Co., Ltd. | B8014 is a kind of high purity, highly dispersible, synthetic boehmite alumina powder. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet media, catalysts...view more B8014 is a kind of high purity, highly dispersible, synthetic boehmite alumina powder. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet media, catalysts support, ceramic additives and paint fillers. view less | |
| NEa-20 | Kowa American Corporation | NEa-20 is the newest offering low MW liquid functional acrylate polymers. The NEa-20 is a trimethoxysilane functionalized polymer that moisture cures without tin catalysts, with excellent weathering properties, and can be used as a reactive plasticizer i...view more NEa-20 is the newest offering low MW liquid functional acrylate polymers. The NEa-20 is a trimethoxysilane functionalized polymer that moisture cures without tin catalysts, with excellent weathering properties, and can be used as a reactive plasticizer in sealant and coatings or the main resin component. view less | Request Sample |
| KRONOS® 6095 | Kronos International, Inc. | KRONOS® 6095 is a solution of raw titanyl sulfate in sulfuric acid, in the form of a black liquor. It is well suited for the production of catalysts, pearlescent pigments, titanium metals and powders, paints and coatings, and pigments. This product also h...view more KRONOS® 6095 is a solution of raw titanyl sulfate in sulfuric acid, in the form of a black liquor. It is well suited for the production of catalysts, pearlescent pigments, titanium metals and powders, paints and coatings, and pigments. This product also has applications in the water treatment and petroleum industries. view less | |
| TIB KAT® 223 | TIB Chemicals | TIB KAT® 223 is a liquid Dioctyltin based catalyst, which has been developed especially for 1K MS silyl systems. It is also suitable for polycondensation reactions of RTV silicone resins and silane terminated polymers as well as for the synthesis of Polyurethane-systems. TIB KAT® 223 shows a lower toxic potential compared to Dibutyltin catalysts...view more TIB KAT® 223 is a liquid Dioctyltin based catalyst, which has been developed especially for 1K MS silyl systems. It is also suitable for polycondensation reactions of RTV silicone resins and silane terminated polymers as well as for the synthesis of Polyurethane-systems. TIB KAT® 223 shows a lower toxic potential compared to Dibutyltin catalysts and can replace these. view less | |
| Manganese Octoate 4% | Patcham USA | Manganese Octoate 4% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and...view more Manganese Octoate 4% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and also gives some through drying. view less | Request Sample |
| Manganese Octoate 6% | Patcham USA | Manganese Octoate 6% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and...view more Manganese Octoate 6% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and also gives some through drying. view less | Request Sample |
| Manganese Octoate 9% | Patcham USA | Manganese Octoate 9% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and...view more Manganese Octoate 9% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and also gives some through drying. view less | Request Sample |
| Manganese Octoate 10% | Patcham USA | Manganese Octoate 10% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints an...view more Manganese Octoate 10% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and also gives some through drying. view less | Request Sample |
| Manganese Octoate 12% | Patcham USA | Manganese Octoate 12% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints an...view more Manganese Octoate 12% is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and also gives some through drying. view less | Request Sample |
| SNOWTEX® ST-O | Nissan Chemical America Corporation | SNOWTEX® ST-O is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s with a particle size of 2-4 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints...view more SNOWTEX® ST-O is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s with a particle size of 2-4 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatments. view less | Request Sample |
| SNOWTEX® ST-OL | Nissan Chemical America Corporation | SNOWTEX® ST-OL is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <3 mPa•s with a particle size of 10-20 µm. It has applications as a catalyst binder, textile treatment, metal surface tre...view more SNOWTEX® ST-OL is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <3 mPa•s with a particle size of 10-20 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatments. view less | Request Sample |
| Manganese Octoate 6% (In D80) | Patcham USA | Manganese Octoate 6% (In D80) is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white p...view more Manganese Octoate 6% (In D80) is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and also gives some through drying. view less | Request Sample |
| Manganese Octoate 10% (In D80) | Patcham USA | Manganese Octoate 10% (In D80) is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white ...view more Manganese Octoate 10% (In D80) is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and also gives some through drying. view less | Request Sample |
| Manganese Octoate 12% (In D80) | Patcham USA | Manganese Octoate 12% (In D80) is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white ...view more Manganese Octoate 12% (In D80) is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and also gives some through drying. view less | Request Sample |
| Manganese Neo 8% (IN BD) | Patcham USA | Manganese Neo 8% (IN BD) is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints...view more Manganese Neo 8% (IN BD) is a clear reddish brown liquid that acts as primary oxidation catalysts and work mainly on the surface of the wet film. It is weaker than cobalt but its efficacy can be enhanced with chelation agents. It can discolor white paints and also gives some through drying. view less | Request Sample |
| TIB KAT® 160 | TIB Chemicals | TIB KAT® 160 is a catalyst that is used in the production of organic esters and plasticizers. It possesses a high level of catalytic activity which leads to almost complete conversions with short reaction times at higher reaction temperatures (> 160°C). This product also enables the production of light-coloured esters. Secondary reactions do hardly occur in comparison to acidic catalysts...view more TIB KAT® 160 is a catalyst that is used in the production of organic esters and plasticizers. It possesses a high level of catalytic activity which leads to almost complete conversions with short reaction times at higher reaction temperatures (> 160°C). This product also enables the production of light-coloured esters. Secondary reactions do hardly occur in comparison to acidic catalysts. view less | |
| SNOWTEX® ST-PS-SO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-SO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 80-150 µm. It has applications as a surface treatment for plastics/metals, binder f...view more SNOWTEX® ST-PS-SO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 80-150 µm. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| REAXIS® C634 | Reaxis Inc. | REAXIS® C634 is a non-corrosive, white solid zinc based catalyst, used for esterification reactions. This product is typically used at concentrations ranging from 0.01 - 0.5 wt% at 160 - 260°C. Reaxis® C634 is well suited for complete conversions with short reaction times due to high catalytic activity as well as minimal secondary reactions and colored by-products compared to acid catalysts...view more REAXIS® C634 is a non-corrosive, white solid zinc based catalyst, used for esterification reactions. This product is typically used at concentrations ranging from 0.01 - 0.5 wt% at 160 - 260°C. Reaxis® C634 is well suited for complete conversions with short reaction times due to high catalytic activity as well as minimal secondary reactions and colored by-products compared to acid catalysts. view less | |
| SNOWTEX® ST-O-UP | Nissan Chemical America Corporation | SNOWTEX® ST-O-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <20 mPa•s with a particle size of 40-100 µm. It has applications as a catalyst binder, textile treatment, metal surface...view more SNOWTEX® ST-O-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <20 mPa•s with a particle size of 40-100 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatments. view less | Request Sample |
| SNOWTEX® ST-PS-S | Nissan Chemical America Corporation | SNOWTEX® ST-PS-S is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 10-15/80-150 µm. It has applications as a surface treatment for plastics/metals, bi...view more SNOWTEX® ST-PS-S is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 10-15/80-150 µm. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| ALUMINASOL™ AS-200 | Nissan Chemical America Corporation | ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistan...view more ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistance, bonding strength, film forming capacity and adhesion to the products it is applied to. view less | Request Sample |
| SNOWTEX® ST-UP | Nissan Chemical America Corporation | SNOWTEX® ST-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 9-15/40-100 µm. It has applications as a coating agent for paper, plastics and metals,...view more SNOWTEX® ST-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 9-15/40-100 µm. It has applications as a coating agent for paper, plastics and metals, a binder for refractory, ceramic and glass fiber, and in textile treatments. view less | Request Sample |
| ISONATE 181 | Univar Solutions | ISONATE 181 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with sufficient glycol to allow easy handling down to 80°F (27°C). This medium-viscosity, supercooled liquid provides more rapid compatibility between isocyanates and polyols, which increases the effectiveness of catalysts...view more ISONATE 181 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with sufficient glycol to allow easy handling down to 80°F (27°C). This medium-viscosity, supercooled liquid provides more rapid compatibility between isocyanates and polyols, which increases the effectiveness of catalysts present and usually results in a more easily controlled polymer reaction. view less | Request Sample |
| REAXIS® C216 | Reaxis Inc. | REAXIS® C216 is a liquid organotin catalyst that contains dioctyltin functionality. This provides improved toxicological properties compared with dibutyltin based catalysts. This product is used at concentrations ranging from 0.01 - 1.0 wt% at 80 - 240°C....view more REAXIS® C216 is a liquid organotin catalyst that contains dioctyltin functionality. This provides improved toxicological properties compared with dibutyltin based catalysts. This product is used at concentrations ranging from 0.01 - 1.0 wt% at 80 - 240°C. Additional features and applications of REAXIS® C216 can be used as a catalysis for polyurethane reactions, curing of silicone resins, esterification and transesterification reactions and the production of silicone-modified polyethylenes. view less | |
| SNOWTEX® ST-PS-M | Nissan Chemical America Corporation | SNOWTEX® ST-PS-M is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The ST-PS has a viscosity of <100 mPa•s, and is called the "String of Pearls" because of the particle shape. It has applications as a surface treatment ...view more SNOWTEX® ST-PS-M is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The ST-PS has a viscosity of <100 mPa•s, and is called the "String of Pearls" because of the particle shape. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| SNOWTEX® ST-PS-MO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-MO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The features of this product include being pearl shaped, good coating, good fluidity, good bonding, large pososity, and high viscosity. It has applicat...view more SNOWTEX® ST-PS-MO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The features of this product include being pearl shaped, good coating, good fluidity, good bonding, large pososity, and high viscosity. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| N,N-Dimethylbenzyl-amine Lupragen® N 103 | BASF Corporation, Chemical Intermediates | N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modifie...view more N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modified epoxy resins are used for cationic electro deposition coatings. N,N-Dimethylbenzyl-amine is used as catalyst for the production of polyurethanes (e.g. for plastic parts). view less | |
| Bulab® 600 | Buckman Laboratories, Inc. | Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amines or tin catalysts...view more Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amines or tin catalysts. view less | |
| Hanos ASA-100F | Hanwha Chemical Corporation | Hanos ASA-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechan...view more Hanos ASA-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechanical strength. This product is well suited for use in conductive transparent electrodes, conductive heating films, nano device, nano-bio material and chemical sensors. view less | |
| Hycat™ 2000S | Dimension Technology Chemical Systems, Inc. | Hycat™ 2000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts...view more Hycat™ 2000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. view less | |
| SNOWTEX® ST-20L | Nissan Chemical America Corporation | SNOWTEX® ST-20L is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s. Most recently, it has been used by the semiconductor industry as a polishing agent for silicon wafers. Other application...view more SNOWTEX® ST-20L is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s. Most recently, it has been used by the semiconductor industry as a polishing agent for silicon wafers. Other applications for SNOWTEX® ST-20L include a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings, refractory, anti-corrosion, and metal surface treatment. view less | Request Sample |
| REAXIS® C160 | Reaxis Inc. | REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activity with minimal secondary reactions and colored by-products when compared to acid catalysts...view more REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activity with minimal secondary reactions and colored by-products when compared to acid catalysts. REAXIS® C160 is non-corrosive and can be used at concentrations ranging from 0.01 - 0.2 wt% at 160 - 260°C. view less | |
| Hanos AST-100F | Hanwha Chemical Corporation | Hanos AST-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechan...view more Hanos AST-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechanical strength. This product is well suited for use in conductive transparent electrodes, conductive nano ink, conductive heating films, nano device, nano-bio material and chemical sensors. view less | |
| Hanos ASP-100F | Hanwha Chemical Corporation | Hanos ASP-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechan...view more Hanos ASP-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechanical strength. This product is well suited for use in conductive transparent electrodes, conductive nano ink, conductive heating films, nano device, nano-bio material and chemical sensors. view less | |
| Borchi® Kat 320 | Borchers, A Company of OMG | Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 320 is an ecologically safe replacement for other polyurethane catalysts...view more Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 320 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® Kat 315 | Borchers, A Company of OMG | Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 315 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 315 is an ecologically safe replacement for other polyurethane catalysts...view more Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 315 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 315 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® Kat 0245 | Borchers, A Company of OMG | Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts...view more Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. This product is suitable for automotive refinishing and industrial coating. In these formulations, Borchi® Kat 0245 is characterized by its very good and consistent activity and stability, even after prolonged storage. view less | |
| SOLYFAST™ 0010 | BASF Dispersions & Resins | SOLYFAST 0010 is designed for use into 2K PUR systems both clear and pigmented, such as coatings used for the protection of plastics, wood and metal substrates. Furthermore, thanks to its broad absorption spectra, it can be used into pigmented coatings. It is particularly recommended when fast catalysis is required and – at the same time – a longer pot-life of the formulation than with non- latent catalysts...view more SOLYFAST 0010 is designed for use into 2K PUR systems both clear and pigmented, such as coatings used for the protection of plastics, wood and metal substrates. Furthermore, thanks to its broad absorption spectra, it can be used into pigmented coatings. It is particularly recommended when fast catalysis is required and – at the same time – a longer pot-life of the formulation than with non- latent catalysts is desired view less | |
| SILRES® MSE 100 | Wacker Chemical Corporation | SILRES® MSE 100 is the methyl ester of a mixture of different oligomeric methylsilicates and is a methoxyfunctional methyl polysiloxane. It is recommended as an ambient temperature moisture-curing binder for heat resistant paints. In combination with suitable catalysts...view more SILRES® MSE 100 is the methyl ester of a mixture of different oligomeric methylsilicates and is a methoxyfunctional methyl polysiloxane. It is recommended as an ambient temperature moisture-curing binder for heat resistant paints. In combination with suitable catalysts and temperature stable pigments and fillers, SILRES® MSE 100 is the optimum binder for ambient curing, heat resistant paints. It may be applied in heat-resistant coatings and metal coatings. view less | Request Sample |
| LUDOX® TMA | Univar Solutions | LUDOX® TMA Colloidal Silica contains synthetic amorphous silica of nominal 22 nanometer particle size. The aqueous colloidal dispersion contains 34% silica and is slightly acidic. LUDOX® TMA Colloidal Silica is used in the preparation of “hybrid” colloidal silica – ethyl silicate binders for precision investment casting. It may also be used in applications in which sodium or alkaline components are undesirable, such as catalysts...view more LUDOX® TMA Colloidal Silica contains synthetic amorphous silica of nominal 22 nanometer particle size. The aqueous colloidal dispersion contains 34% silica and is slightly acidic. LUDOX® TMA Colloidal Silica is used in the preparation of “hybrid” colloidal silica – ethyl silicate binders for precision investment casting. It may also be used in applications in which sodium or alkaline components are undesirable, such as catalysts or in formulations containing polar organic solvents. view less | Request Sample |
| CYCAT® 600A | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| Bulab® 685 | Buckman Laboratories, Inc. | Bulab® 685 is an 85% active grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) for use as a catalyst in water-blown polyurethane foam. TMEDA is a difunctional tertiary amine with little steric hindrance. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 685 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amine or tin catalysts...view more Bulab® 685 is an 85% active grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) for use as a catalyst in water-blown polyurethane foam. TMEDA is a difunctional tertiary amine with little steric hindrance. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 685 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amine or tin catalysts. view less | |
| CYCAT® 600 | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| K-KAT® 348 | King Industries, Inc. | K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...view more K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. view less | |
| Borchi® Kat 24 | Borchers, A Company of OMG | Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts...view more Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. view less | |
| Nano Alumina (Catalyst Support, Ceramic Filler) | Tianjin Boyuan New Materials Co., Ltd. | Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in au...view more Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in automotive exhaust purification, industrial emissions processing and in the refinery industry. It can be also used as ceramic filler. It is a practical and effective product for improving the thermal stability and mechanical strength of materials. view less |
