| UVECOAT® 9146 | Allnex | UVECOAT® 9146 is an aliphatic unsaturated acrylic urethane polymer for use as a crosslinker with UVECOAT® resins in UV curable powder coatings. Use of UVECOAT® 9146 in a UV curable powder coating will enhance reactivity and improve surface hardness. | Request Sample |
| BYK®-3900 P | BYK | BYK®-3900 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product is a very effective leveling and anti-crater additive for especially critica...view more BYK®-3900 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product is a very effective leveling and anti-crater additive for especially critical powder coating systems. It improves the tolerance of the powder coating system towards contamination which might occur during production or application of powder coatings ("post-wetting effect“). As a result BYK-3900P prevents craters, pinholes and other surface defects in powder coatings. BYK-3900P is also suitable for UV-curing powder coating systems. view less | Request Sample |
| SORPALU® Nano Alumina Powder for RC Photo Paper Coating SPL110 | Human Chemicals Co., Ltd. | SORPALU® Nano Alumina Powder for RC Photo Paper Coating SPL110 is an alumina hydrate appearing as white free flowing powder. It can be readily dispersed in diluted mono valent acids like nitric acid, acetic acid etc. Stable dispersions are obtained to 25w...view more SORPALU® Nano Alumina Powder for RC Photo Paper Coating SPL110 is an alumina hydrate appearing as white free flowing powder. It can be readily dispersed in diluted mono valent acids like nitric acid, acetic acid etc. Stable dispersions are obtained to 25wt% solid concentration. view less | |
| Benzoin | Estron Chemical, Inc. | Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the ...view more Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the coating film. view less | |
| D.E.H.™ 90 | Univar Solutions | D.E.H.™ 90 is a solid reaction product of liquid epoxy resin and polyphenols containing polyacrylate flow modifier and 2% curing accelerator. Designed for powder coating applications that require fast cure capability and low curing temperature, combined w...view more D.E.H.™ 90 is a solid reaction product of liquid epoxy resin and polyphenols containing polyacrylate flow modifier and 2% curing accelerator. Designed for powder coating applications that require fast cure capability and low curing temperature, combined with superior adhesion property to metal substrates. Fully compatible with other D.E.H.™ 80 series epoxy curing agents. view less | Request Sample |
| Luna-mer DDA | DKSH | Luna-mer DDA is a dibasic acid that can be used as a powder coating curing agent with GMA-functional acrylic resins. Luna-mer DDA is the hardener of choice for GMA resins due to the combination of favorable melting point, cure rate and viscosity reduction...view more Luna-mer DDA is a dibasic acid that can be used as a powder coating curing agent with GMA-functional acrylic resins. Luna-mer DDA is the hardener of choice for GMA resins due to the combination of favorable melting point, cure rate and viscosity reduction. Luna-mer DDA offers cured coatings with outstanding clarity, non-yellowing properties, chemical resistance and exterior durability. This product is available in Europe, Asia and North America. view less | Request Sample |
| DOUBLEMER® 4500 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 4500 is a high molecular weight polymer epoxy, which has a backbone of acrylate with glycidyl epoxide. It is designed for increasing the curing speed and viscosity. This white to off-white powder is odorless and is characterized by its light co...view more DOUBLEMER® 4500 is a high molecular weight polymer epoxy, which has a backbone of acrylate with glycidyl epoxide. It is designed for increasing the curing speed and viscosity. This white to off-white powder is odorless and is characterized by its light color and low skin and eye irritation potential. UV cured coatings formulated with DOUBLEMER® 4500 can be used for: metal coatings, overprint varnishes, plastic coatings, PET coatings, keypad coating, wood coating and glass coating. view less | |
| DOUBLEMER® 6MX75 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 6MX75 is an acrylate oligomer. It shows excellent adhesion, fast curing, low shrinkage, good aluminum powder orientation, good anti-yellowing and excellent leveling. DOUBLEMER® 6MX75 can also be used as an adhesion promoter, to decrease coating...view more DOUBLEMER® 6MX75 is an acrylate oligomer. It shows excellent adhesion, fast curing, low shrinkage, good aluminum powder orientation, good anti-yellowing and excellent leveling. DOUBLEMER® 6MX75 can also be used as an adhesion promoter, to decrease coating shrinkage, and to improve matting efficiency. view less | |
| Escat™ 60 | Estron Chemical, Inc. | Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 6...view more Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 60 include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, polyesters cured by GMA-functional acrylics, polyester-TGIC and polyester-PT-910. Escat™ 60 reduces the cure temperature of a particular system and shortens the required bake time at a given cure temperature when compared to non-catalyzed systems. view less | |
| Chisorb® 5228 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 5228 is a hydroxyphenyl benzotriazole UV absorber specially designed for high performance coating applications. It provides efficiency to coating and light sensitive substrates due to its characteristic broad band absorption. With excellent solub...view more Chisorb® 5228 is a hydroxyphenyl benzotriazole UV absorber specially designed for high performance coating applications. It provides efficiency to coating and light sensitive substrates due to its characteristic broad band absorption. With excellent solubility and high thermal and environmental performance, Chisorb® 5228 is particularly suitable for coatings exposed to high temperature curing processes, such as powder and coil coatings, or high environmental stress. This off-white or light yellowish crystalline powder is also suitable for automotive coatings. view less | |
| GR-FMT | Hubei Gurun Technology Co., Ltd. | GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV c...view more GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV coating, printing ink and adhesive. view less | |
| Oxymelt® A-2 | Estron Chemical, Inc. | Oxymelt® A-2 is an additive capable of both reducing the melt viscosity of powder coating formulations and eliminating pinholes without affecting the applied film color. Oxymelt® A-2 is noted primarily for its degassing capability in powder coatings cured...view more Oxymelt® A-2 is an additive capable of both reducing the melt viscosity of powder coating formulations and eliminating pinholes without affecting the applied film color. Oxymelt® A-2 is noted primarily for its degassing capability in powder coatings cured in gas ovens. This degassing agent is well suited for polyester-HAA and polyurethane systems that emit volatiles during cure, and Oxymelt® A-2 is also appropriate for other traditional powder coating systems such as polyester-TGIC, hybrids, acrylics and epoxies. view less | |
| Luna-mer 2165D | DKSH | Luna-mer 2165D is a synthetic resin-based matting agent for hybrid powder coatings, which is designed for wide ranges of curing requirements, having universal applicability to any polyester resins, whether fast-curing or not. The use of this product can p...view more Luna-mer 2165D is a synthetic resin-based matting agent for hybrid powder coatings, which is designed for wide ranges of curing requirements, having universal applicability to any polyester resins, whether fast-curing or not. The use of this product can provide ranges from 8–60% (60°) of low gloss, excellent flow and outstanding anti-yellowing. This product is available in Europe, Asia and North America. view less | Request Sample |
| Reflex™ Passion Red RC-6640K | CQV Co., Ltd. | Reflex™ Passion Red RC-6640K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It cons...view more Reflex™ Passion Red RC-6640K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Gray Pearl RC-9011S | CQV Co., Ltd. | Reflex™ Gray Pearl RC-9011S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It cons...view more Reflex™ Gray Pearl RC-9011S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Green Pearl RC-9091S | CQV Co., Ltd. | Reflex™ Green Pearl RC-9091S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a green, free-flowing powder. It co...view more Reflex™ Green Pearl RC-9091S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a green, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Real White RC-1000S | CQV Co., Ltd. | Reflex™ Real White RC-1000S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a white, free-flowing powder. It con...view more Reflex™ Real White RC-1000S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a white, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Orange Pearl RC-7021S | CQV Co., Ltd. | Reflex™ Orange Pearl RC-7021S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a orange, free-flowing powder. It ...view more Reflex™ Orange Pearl RC-7021S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a orange, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Red Pearl RC-7441S | CQV Co., Ltd. | Reflex™ Red Pearl RC-7441S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conser...view more Reflex™ Red Pearl RC-7441S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Evergreen Pearl RC-7991S | CQV Co., Ltd. | Reflex™ Evergreen Pearl RC-7991S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a green, free-flowing powder. I...view more Reflex™ Evergreen Pearl RC-7991S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a green, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| CDH | Kowa American Corporation | CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...view more CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| SUDH | Kowa American Corporation | SUDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agen...view more SUDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| ADH | Kowa American Corporation | ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...view more ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| SDH | Kowa American Corporation | SDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...view more SDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| IDH | Kowa American Corporation | IDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...view more IDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| N-12 | Kowa American Corporation | N-12 is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agen...view more N-12 is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| B616 | Tianyi Chemical Engineering Material Co., Ltd. | B616, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aque...view more B616, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aqueous solution. This product is compatible with a number of different resins. view less | |
| B618 | Tianyi Chemical Engineering Material Co., Ltd. | B618, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aque...view more B618, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aqueous solution. This product is compatible with a number of different resins. view less | |
| B520 | Tianyi Chemical Engineering Material Co., Ltd. | B520, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aque...view more B520, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aqueous solution. This product is compatible with a number of different resins. view less | |
| UV708 | Tianyi Chemical Engineering Material Co., Ltd. | UV708, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 3.5 and 6.0 in a 5% aqu...view more UV708, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 3.5 and 6.0 in a 5% aqueous solution. This product is compatible with a number of different resins. view less | |
| GMA-500 | Estron Chemical, Inc. | GMA-500 is a solid, glycidyl-functional acrylic crosslinker for exterior durable powder coatings. It is highly branched and can cure with carboxyl and amine-functional compounds. For example, GMA-500 can be used as the sole crosslinking agent with a linea...view more GMA-500 is a solid, glycidyl-functional acrylic crosslinker for exterior durable powder coatings. It is highly branched and can cure with carboxyl and amine-functional compounds. For example, GMA-500 can be used as the sole crosslinking agent with a linear carboxyl polyester resin to create an 75/25 polyester/acrylic hybrid powder coating for protective purposes or cured with dodecanedioic acid to make smooth, high gloss, clear top coats. view less | |
| Reflex™ Fine Gray Pearl RC-9011D | CQV Co., Ltd. | Reflex™ Fine Gray Pearl RC-9011D, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It...view more Reflex™ Fine Gray Pearl RC-9011D, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Fine Blue Pearl RC-7881D | CQV Co., Ltd. | Reflex™ Fine Blue Pearl RC-7881D, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It...view more Reflex™ Fine Blue Pearl RC-7881D, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Splendor Orange Pearl RC-7021K | CQV Co., Ltd. | Reflex™ Splendor Orange Pearl RC-7021K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a orange, free-flowing powder. It conserves the feel of the interference pigment by coating...view more Reflex™ Splendor Orange Pearl RC-7021K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a orange, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Splendor Red Pearl RC-7441K | CQV Co., Ltd. | Reflex™ Splendor Red Pearl RC-7441K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. ...view more Reflex™ Splendor Red Pearl RC-7441K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Goldenbell Color Pearl RC-7001S | CQV Co., Ltd. | Reflex™ Goldenbell Color Pearl RC-7001S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a yellowish, free-flowing powder. It conserves the feel of the interference pigment by coating...view more Reflex™ Goldenbell Color Pearl RC-7001S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a yellowish, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Gray Gold Pearl RC-7011S | CQV Co., Ltd. | Reflex™ Gray Gold Pearl RC-7011S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It...view more Reflex™ Gray Gold Pearl RC-7011S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Deep Blue Pearl RC-7883S | CQV Co., Ltd. | Reflex™ Deep Blue Pearl RC-7883S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It...view more Reflex™ Deep Blue Pearl RC-7883S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Sky Blue Pearl RC-7885S | CQV Co., Ltd. | Reflex™ Sky Blue Pearl RC-7885S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It ...view more Reflex™ Sky Blue Pearl RC-7885S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| Reflex™ Super Onyx Black RC-1010S | CQV Co., Ltd. | Reflex™ Super Onyx Black RC-1010S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a brilliant black, free-flowing powder. It conserves the feel of the interference pigment by coating...view more Reflex™ Super Onyx Black RC-1010S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a brilliant black, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| D.E.H.™ 87 | Univar Solutions | D.E.H.™ 87 is a higher molecular weight curing agent based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A. Designed primarily for functional powder coating applications requiring a high degree of flexibility and a good stora...view more D.E.H.™ 87 is a higher molecular weight curing agent based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A. Designed primarily for functional powder coating applications requiring a high degree of flexibility and a good storage stability. view less | Request Sample |
| BYK®-368 P | BYK | BYK®-368 P is a standard anti-crater and leveling additive for powder coatings to avoid fish eyes and other surface defects. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, p...view more BYK®-368 P is a standard anti-crater and leveling additive for powder coatings to avoid fish eyes and other surface defects. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product acts as an anti-cratering and leveling additive for especially critical systems. It reduces orange peel by improving the leveling of the powder coating film. Pinholes, fish eyes and other surface defect are efficient avoided. BYK-368 P is also suitable for UV curing systems. view less | Request Sample |
| UVECOAT® 9010 | Allnex | UVECOAT® 9010 is a semi-crystalline unsaturated polyester resin for use in UV curable powder coatings. Used with amorphous resins from the UVECOAT® 2000 or 3000 range, UVECOAT® 9010 improves the smoothness and flexibility of the coating. | Request Sample |
| Doublecure® ITX | Double Bond Chemical Ind., Co., Ltd. | Doublecure® ITX is a photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This pale yellow powder is used to enhance curing proper...view more Doublecure® ITX is a photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This pale yellow powder is used to enhance curing properties. The usage rates vary according to the composition of the system, source of light, line speed, and film thickness but usually lie between 0.25 % to 3 % w/w together with photoactivators at 2 - 5 % w/w. Applications include printing ink, decorative coating for metal cans, solder mask, and pressure sensitive sheet. view less | |
| Epomatt™ G-151 | Estron Chemical, Inc. | Epomatt™ G-151 is a special type of gloss modifier for epoxy-based powder coatings. Using 8-10 phr of Epomatt™ G-151 with an epoxy resin cured with 3-6 phr of an epoxy curing agent such as Estron’s Epoxy Hardener G-91, most accelerated dicyandiamides, or ...view more Epomatt™ G-151 is a special type of gloss modifier for epoxy-based powder coatings. Using 8-10 phr of Epomatt™ G-151 with an epoxy resin cured with 3-6 phr of an epoxy curing agent such as Estron’s Epoxy Hardener G-91, most accelerated dicyandiamides, or o-tolyl biguanide (OTB) can produce an exceptionally smooth, matte coating with good mechanical and chemical resistance properties. view less | |
| CRAYVALLAC® PC | Arkema Rheology & Specialty Additives | CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusi...view more CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. view less | Request Sample |
| Reflex™ Splendor Sky Blue Pearl RC-7885K | CQV Co., Ltd. | Reflex™ Splendor Sky Blue Pearl RC-7885K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating...view more Reflex™ Splendor Sky Blue Pearl RC-7885K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. view less | |
| TINUVIN® 928 | BASF Dispersions & Resins | TINUVIN 928 is UV absorber of the hydroxyphenyl benzotriazole class developed specially for high performance coating applications. Its characteristic broadband absorption provides efficient protection to coatings and light sensitive substrates. Its excell...view more TINUVIN 928 is UV absorber of the hydroxyphenyl benzotriazole class developed specially for high performance coating applications. Its characteristic broadband absorption provides efficient protection to coatings and light sensitive substrates. Its excellent solubility and high thermal and environmental permanence makes it particularly suitable for coatings exposed to high temperature curing processes, such as powder and coil coatings, or high environmental stress. It may be used in combination with a light stabilizer of the sterically hindered amine or aminoether class (HALS) such as recommended below. These combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination, and color change. The light stabilizers may be added in two-coat automotive finishes to the base and clear coat. view less | |
| PChem® BM164 | Pioneer Chemicals Co., Ltd. | PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, ...view more PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, marine coating, plastic coating, concrete cure, and is suitable for dear coating of exterior and interior concrete floors and road surface. PChem® BM164 has a molecular weight of 92,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.40. view less | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| CurveX-2 USB Oven Logger Standard Kit | TQC | Profiling an industrial powder coating oven starts right here with the CurveX-2 Oven Logger standard KIT. The heart of the KIT is the CurveX-2 USB Oven Logger that offers easy-to-use, high quality temperature logging for industrial paint and powdercoat c...view more Profiling an industrial powder coating oven starts right here with the CurveX-2 Oven Logger standard KIT. The heart of the KIT is the CurveX-2 USB Oven Logger that offers easy-to-use, high quality temperature logging for industrial paint and powdercoat cure ovens. The temperature logger is fitted with a large display for easy menu-driven operation and quick display of measurement results. view less |  |
| PChem® BM64A | Pioneer Chemicals Co., Ltd. | PChem® BM64A, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is very compatible with numerous nitrocellulose and solvents and is commonly used in applications of ...view more PChem® BM64A, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is very compatible with numerous nitrocellulose and solvents and is commonly used in applications of container coatings, marine coating, tile paint, plastic coating, color concentrates, concrete cure and sealer. PChem® BM64A has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 4.5 mgKOH/g, and an inherent viscosity of 0.18. view less | |
| Luna-matt 70 | DKSH | Luna-matt 70 is a new version matting hardener for hybrid powder coatings. It can produce gloss level less than 3% by selecting proper polyester resins. Compa-red with the typical type of matt hardener, Luna-matt 70 can provide excellent anti-yellowing, c...view more Luna-matt 70 is a new version matting hardener for hybrid powder coatings. It can produce gloss level less than 3% by selecting proper polyester resins. Compa-red with the typical type of matt hardener, Luna-matt 70 can provide excellent anti-yellowing, color stability and gloss stability at over baking condition, special application in light color powder coating. It can also provide good surface properties such as excellent flow, smooth surface and excellent finger print resistance. This product is available in Europe, Asia and North America. view less | Request Sample |
| XOANONS® WE-D9542N | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D9542N is a silicone modified polyacrylate with hydroxy group. It is an anti-graffiti and easy-cleaning additive for hydroxyl acrylic powder coating. This product can be used as a curing agent for blocked isocyanate or amino resins. It impart...view more XOANONS® WE-D9542N is a silicone modified polyacrylate with hydroxy group. It is an anti-graffiti and easy-cleaning additive for hydroxyl acrylic powder coating. This product can be used as a curing agent for blocked isocyanate or amino resins. It imparts excellent performance of resistance of oil-pen wipe, blocking resistance, hydrophobicity and oleophobicity. It also prolongs bake time to improve anti-graffiti property. view less | |
| Powdermate® 520PWS | Arxada – Troy Corporation | Powdermate® 520PWS reduces the molten viscosity of a powder coating thereby improving its flow and substrate wetting performance. This makes Powdermate® 520PWS suitable for primers and direct-to-metal applications. In particular, Powdermate® 520PWS should...view more Powdermate® 520PWS reduces the molten viscosity of a powder coating thereby improving its flow and substrate wetting performance. This makes Powdermate® 520PWS suitable for primers and direct-to-metal applications. In particular, Powdermate® 520PWS should be tested in coatings requiring improved filiform corrosion resistance. Powdermate® 520PWS also increases the pigment wetting ability of a resin, which results in improved color development and color consistency. This additive can be used in both UV and thermal cure systems and is compatible with acrylic, epoxy, and polyester resins. view less | Request Sample |
| Isocryl® EP-550 | Estron Chemical, Inc. | Isocryl® EP-550 is the original matting hardener of the Isocryl® line that now includes EP-550, EP-560 and EP-570. Isocryl® EP-550 can be formulated with low viscosity, linear, carboxyl-functional polyesters, having acid values 30-35, to generate low-gloss, weatherable, TGIC-free powder coating...view more Isocryl® EP-550 is the original matting hardener of the Isocryl® line that now includes EP-550, EP-560 and EP-570. Isocryl® EP-550 can be formulated with low viscosity, linear, carboxyl-functional polyesters, having acid values 30-35, to generate low-gloss, weatherable, TGIC-free powder coating systems. A typical binder consists of 75 parts polyester and 25 parts Isocryl® EP-550. view less | |
| Isocryl® EP-550G | Estron Chemical, Inc. | Isocryl® EP-550G is the ground version of Isocryl® EP-550 resin flakes. This GMA acrylic resin is the original matting hardener of the Isocryl® line that now includes EP-550/550G, EP-560 and EP-570. Isocryl® EP-550G can be formulated with low viscosity, linear, carboxyl-functional polyesters having acid values 30-35 to generate low-gloss, weatherable, TGIC-free powder coating...view more Isocryl® EP-550G is the ground version of Isocryl® EP-550 resin flakes. This GMA acrylic resin is the original matting hardener of the Isocryl® line that now includes EP-550/550G, EP-560 and EP-570. Isocryl® EP-550G can be formulated with low viscosity, linear, carboxyl-functional polyesters having acid values 30-35 to generate low-gloss, weatherable, TGIC-free powder coating systems. view less | |
| Epoxy Hardener G-91 | Estron Chemical, Inc. | Epoxy Hardener G-91 is an imidazole type of curing agent for epoxy-based powder coatings. Coatings cured with Epoxy Hardener G-91 show excellent chemical resistance, mechanical properties, and the capability for low temperature cure. | |
| SYLOSIV® A 3 | GRACE | SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may crea...view more SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less | |
| SYLOSIV® A 3 | Univar Solutions | SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may crea...view more SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less | Request Sample |
| SYLOSIV® K 300 | GRACE | SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water ...view more SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® K 300 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less | |
| Epoxy Hardener G-92 | Estron Chemical, Inc. | Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings a...view more Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings are noted. view less | |
| Epokukdo KDF-407 | Kukdo Chemical Co., Ltd. | Epokukdo KD-407 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-448H | Kukdo Chemical Co., Ltd. | Epokukdo KD-448H is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-448J | Kukdo Chemical Co., Ltd. | Epokukdo KD-448J is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-448 | Kukdo Chemical Co., Ltd. | Epokukdo KD-448 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-438 | Kukdo Chemical Co., Ltd. | Epokukdo KD-438 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-407 | Kukdo Chemical Co., Ltd. | Epokukdo KD-407 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-426 | Kukdo Chemical Co., Ltd. | Epokukdo KD-426 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-420 | Kukdo Chemical Co., Ltd. | Epokukdo KD-420 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-410J | Kukdo Chemical Co., Ltd. | Epokukdo KD-410J is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-410 | Kukdo Chemical Co., Ltd. | Epokukdo KD-410 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KD-405 | Kukdo Chemical Co., Ltd. | Epokukdo KD-405 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| Epokukdo KBPN-120 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-120 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-120 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for Powder Coating...view more Epokukdo KBPN-120 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-120 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for Powder Coating or Laminates. It also has high reactivity so that it is curable at ambient temperature. view less | |
| Epokukdo KBPN-115 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-115 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-110 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for Powder Coating...view more Epokukdo KBPN-115 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-110 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for Powder Coating or Laminates. It also has high reactivity so that it is curable at ambient temperature. view less | |
| Epokukdo KBPN-110 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-110 (BPA - Novolac Epoxy) has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional epoxy resin. KBPN-110 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for powder coating...view more Epokukdo KBPN-110 (BPA - Novolac Epoxy) has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional epoxy resin. KBPN-110 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for powder coating or laminates. It also has high reactivity so that it is curable at ambient temperature. view less | |
| NT-552 | Changzhou Niutang Chemical Plant | NT-552 is a white powdered curing agent. It is widely used for its stabilizing, adhesive and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. | |
| Epokukdo KD-404 | Kukdo Chemical Co., Ltd. | Epokukdo KD-404 is a phenol excess type curing agent designed to improve good mechanical properties and chemical resistance required functional powder coatings application with low temperature fast curing. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| Luna-mer 552 | DKSH | Luna-mer 552 is a curing agent for TGIC-free, exterior durable powder coatings based on carboxyl functional polyesters. Cured film performance is comparable to those of polyester/TGIC systems. Luna-mer 552 has an exceptionally clean toxicological profile ...view more Luna-mer 552 is a curing agent for TGIC-free, exterior durable powder coatings based on carboxyl functional polyesters. Cured film performance is comparable to those of polyester/TGIC systems. Luna-mer 552 has an exceptionally clean toxicological profile resulting in powder coatings that are safe to work with. This product is available in Europe, Asia and North America. view less | Request Sample |
| CERAFLOUR® 950 | BYK | CERAFLOUR® 950 is a micronized wax for improving surface properties of solvent-free UV-curing lacquers and powder coatings. It is composed of a micronized modified HD polyethylene wax. This product is used in solvent free UV-curing furniture and parquet l...view more CERAFLOUR® 950 is a micronized wax for improving surface properties of solvent-free UV-curing lacquers and powder coatings. It is composed of a micronized modified HD polyethylene wax. This product is used in solvent free UV-curing furniture and parquet lacquer and powder coatings. view less | Request Sample |
| Ancamine® 2337S | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...view more Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. view less | Request Sample |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...view more CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...view more CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...view more CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...view more CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...view more CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...view more CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...view more CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| Luna-cat 7318 | DKSH | Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe,...view more Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe, Asia and North America. view less | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| Epotec® TH 982 | Aditya Birla | Epotec® TH 982 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator. This product is ideal for use in both decorative and functional powder coatings. | |
| TGIC-P | Changzhou Niutang Chemical Plant | TGIC-P is a white powder with high heat and chemical resistance. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant in...view more TGIC-P is a white powder with high heat and chemical resistance. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. view less | |
| Epotec® TH 983 | Aditya Birla | Epotec® TH 983 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator and flow modifier. This product is ideal for use in both decorative and protective powder coatings. | |
| Isocryl® EP-455 | Estron Chemical, Inc. | Isocryl® EP-455 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® ...view more Isocryl® EP-455 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® EP-455, with a Tg of 59°C, demonstrates a balance of properties between Isocryl® EP-450 and EP-555 for finished powder coating stability and cured film smoothness. view less | |
| TGIC-D | Changzhou Niutang Chemical Plant | TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB s...view more TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. view less | |
| CRYLCOAT® 1690-0 | Allnex | CRYLCOAT® 1690-0 is a carboxylated polyester resin designed for 60/40 hybrid powder coatings to be cured at 180°C. Coatings based on CRYLCOAT® 1690-0 show an outstanding flow out with excellent mechanical and detergent resistance. | Request Sample |
| CRYLCOAT® 2494-6 | Allnex | CRYLCOAT® 2494-6 is a highly reactive carboxylated polyester resin for use with TGIC in the production of powder coatings. Coatings based on CRYLCOAT® 2494-6 exhibit good outdoor durability and do not exhibit blooming when cured at lower temperatures. | Request Sample |
| Escat™ 22 | Estron Chemical, Inc. | Escat™ 22 is a powder coating additive capable of improving the mechanical and solvent resistance properties. Escat™ 22 can be used in matte polyester powder coatings cured with the Isocryl matting hardeners EP-550, EP-560 and EP-570. | |
| Oxymelt® A-4 | Estron Chemical, Inc. | Oxymelt® A-4 is capable of both reducing the melt viscosity of powder coating formulations and eliminating surface defects, especially pinholes, without affecting the applied film color. The additive is noted primarily for its degassing capability in powd...view more Oxymelt® A-4 is capable of both reducing the melt viscosity of powder coating formulations and eliminating surface defects, especially pinholes, without affecting the applied film color. The additive is noted primarily for its degassing capability in powder coatings cured in electric ovens. Oxymelt® A-4 can replace part or all of the benzoin in a powder coating formulation, and is non-yellowing, non-fuming and imparts superior anti-gassing properties. view less |
