| SAFIC-CHEM A18 | Safic-Alcan | SAFIC-CHEM A18 is particularly suitable as grinding resin for the manufacture of tinting pastes or pigment preparations. This aldehyde resin is very heat stable and has very wide compatibility with other resins, good light fastness, good pigment-wetting properties, and aliphatic hydrocarbon resistance. SAFIC-CHEM A18 is also used as a co-binder with nitrocellulose...view more SAFIC-CHEM A18 is particularly suitable as grinding resin for the manufacture of tinting pastes or pigment preparations. This aldehyde resin is very heat stable and has very wide compatibility with other resins, good light fastness, good pigment-wetting properties, and aliphatic hydrocarbon resistance. SAFIC-CHEM A18 is also used as a co-binder with nitrocellulose, alkyd, or polyurethane resins in order to improve the hardness, gloss, flexibility, and yellowing resistance of the paint film. It exhibits excellent solubility in alcohols, ketones, esters, and aromatic hydrocarbons. view less | Request Sample |
| Resiflow® L | Estron Chemical, Inc. | Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose...view more Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| AFCONA - 3758 | AFCONA Additives Sdn Bhd | AFCONA – 3758 is a polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling and flow control agent with anti-crater properties. It reduces surface tension, has minimal foam stabilization effects, and improves substrate wetting pro...view more AFCONA – 3758 is a polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling and flow control agent with anti-crater properties. It reduces surface tension, has minimal foam stabilization effects, and improves substrate wetting properties, and replaces fluorocarbon in systems. AFCONA – 3758 finds application in solvent-based coatings, organic coating systems, stoving enamels based on alkyd, acrylic, and polyester resins, polyurethane coatings, two-pack epoxy compounds, thermoplastic systems such as NC, TPA, and CAB, and in ultraviolet coatings. view less | |
| TEGO® Glide A 116 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide A 116 is a highly effective glide additive with superior scratch resistance. It is a clear liquid organo-modified polysiloxane that is excellent in combination with waxes and/or matting agents. TEGO® Glide A 116 has excellent slip properties i...view more TEGO® Glide A 116 is a highly effective glide additive with superior scratch resistance. It is a clear liquid organo-modified polysiloxane that is excellent in combination with waxes and/or matting agents. TEGO® Glide A 116 has excellent slip properties in pigmented, solventborne, and NC systems. It is used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. view less | Request Sample |
| PChem® MB-304-A | Pioneer Chemicals Co., Ltd. | PChem® MB-304-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers admirable salt resistances and weathering. It is compatible with numerous nitrocellulose and solvents and is commonly used in applications o...view more PChem® MB-304-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers admirable salt resistances and weathering. It is compatible with numerous nitrocellulose and solvents and is commonly used in applications of adhesives, aerosol paints, ceramic transfer lacquers, and cigarette packaging. PChem® MB-304-A has a molecular weight of 155,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.42. view less | |
| PChem® MB-6-C | Pioneer Chemicals Co., Ltd. | PChem® MB-6-C, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. Since it has a high molecular weight (60,000 g/mol), its chemical resistance is greater. MB-6-C is very well-suited with various nitrocellulose...view more PChem® MB-6-C, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. Since it has a high molecular weight (60,000 g/mol), its chemical resistance is greater. MB-6-C is very well-suited with various nitrocellulose and solvents and commonly used in applications of aerosol paints and adhesives. It has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.23. view less | |
| PChem® MB-605 | Pioneer Chemicals Co., Ltd. | PChem® MB-605, in the form of clear solid beads, is an acrylic resin that provides good pigment dispersion characteristics and wetting and is soluble in glycol ether acetates, esters, glycol ethers, ketones, and aromatic. It is compatible with a wide variety of other resins, such as nitrocellulose...view more PChem® MB-605, in the form of clear solid beads, is an acrylic resin that provides good pigment dispersion characteristics and wetting and is soluble in glycol ether acetates, esters, glycol ethers, ketones, and aromatic. It is compatible with a wide variety of other resins, such as nitrocellulose, acrylics, vinyl, and is for use in solvent-based inks. PChem® MB-605 has a molecular weight of 8,200 g/mol, moisture content of equal to or less than 1.0%, acid value of 53 mgKOH/g, and an inherent viscosity of 0.06. view less | |
| PChem® BM64A | Pioneer Chemicals Co., Ltd. | PChem® BM64A, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is very compatible with numerous nitrocellulose and solvents and is commonly used in applications of ...view more PChem® BM64A, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is very compatible with numerous nitrocellulose and solvents and is commonly used in applications of container coatings, marine coating, tile paint, plastic coating, color concentrates, concrete cure and sealer. PChem® BM64A has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 4.5 mgKOH/g, and an inherent viscosity of 0.18. view less | |
| DISPERBYK®-2055 | BYK | DISPERBYK®-2055 is a high molecular-weight wetting and dispersing additive with a solids content of 100%. This liquid additive has a good processing viscosity and can be used in systems of varying polarity, from low-polarity solvent-borne systems, including air-drying alkyds, alkyd/melamine resins, nitrocellulose...view more DISPERBYK®-2055 is a high molecular-weight wetting and dispersing additive with a solids content of 100%. This liquid additive has a good processing viscosity and can be used in systems of varying polarity, from low-polarity solvent-borne systems, including air-drying alkyds, alkyd/melamine resins, nitrocellulose, 2-pack polyurethanes, acrylic/melamine resins, and UV-curable coatings, through to aqueous systems. In solvent-borne systems it can be used with or without grinding resin, whereas in aqueous formulations the best results are achieved with binder-free grinds. view less | Request Sample |
| PChem® MB-6-1 | Pioneer Chemicals Co., Ltd. | PChem® MB-6-1, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. Since it has a high molecular weight (160,000 g/mol), its chemical resistance is greater. MB-6-1 is very well-suited with various nitrocellulose...view more PChem® MB-6-1, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. Since it has a high molecular weight (160,000 g/mol), its chemical resistance is greater. MB-6-1 is very well-suited with various nitrocellulose and solvents and commonly used in applications of aerosol paints, adhesives, casting, and embedment. It has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.70. view less | |
| PLASTOPAL® H 85 EB LF | BASF Dispersions & Resins | PLASTOPAL H 85 EB LF is a urea-formaldehyde resin solution. Because it contains little free formaldehyde and low amounts of solvent, it is especially suitable for use in low odor, acid-curable coatings. Films based on PLASTOPAL H 85 EB LF will have high gloss even in white-pigmented acid curable coatings. In addition, it can also be used to formulate nitrocellulose...view more PLASTOPAL H 85 EB LF is a urea-formaldehyde resin solution. Because it contains little free formaldehyde and low amounts of solvent, it is especially suitable for use in low odor, acid-curable coatings. Films based on PLASTOPAL H 85 EB LF will have high gloss even in white-pigmented acid curable coatings. In addition, it can also be used to formulate nitrocellulose coatings where it suppresses yellowing and imparts gloss. PLASTOPAL H 85 EB LF is recommended for applications such as interior/exterior wood coatings for floor, furniture, or millwork applications. view less | |
| AFCONA - 2024 | AFCONA Additives Sdn Bhd | AFCONA – 2024 is a silicone-free polymer in a SBP spirit and PMA solvent. This slightly yellow, transparent liquid functions as a strong defoamer with levelling performance for all solvent-based coatings. This product is suitable for use in solvent-based coatings, printing inks, and thermosetting resin systems where it eliminates foam and blistering. AFCONA – 2024 finds application in nitrocellulose...view more AFCONA – 2024 is a silicone-free polymer in a SBP spirit and PMA solvent. This slightly yellow, transparent liquid functions as a strong defoamer with levelling performance for all solvent-based coatings. This product is suitable for use in solvent-based coatings, printing inks, and thermosetting resin systems where it eliminates foam and blistering. AFCONA – 2024 finds application in nitrocellulose lacquers and acid-cured wood finishes, two-component polyurethane lacquers, cold cured epoxy resin systems, unsaturated polyester systems, baking paint applied by curtain coater and dipping, and in colored and matted systems. view less | |
| Chroma-Chem® 824-0082 | Chromaflo Technologies | Chroma-Chem® 824-0082 is a pigment dispersion for solvent-based coatings. It is Titanium White with the Color Index Name: PW6, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arch...view more Chroma-Chem® 824-0082 is a pigment dispersion for solvent-based coatings. It is Titanium White with the Color Index Name: PW6, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-0705 | Chromaflo Technologies | Chroma-Chem® 824-0705 is a pigment dispersion for solvent-based coatings. It is Toluidine Red with the Color Index Name: PR 3, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arch...view more Chroma-Chem® 824-0705 is a pigment dispersion for solvent-based coatings. It is Toluidine Red with the Color Index Name: PR 3, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-0924 | Chromaflo Technologies | Chroma-Chem® 824-0924 is a pigment dispersion for solvent-based coatings. It is Dinitro Orange with the Color Index Name: PO 5, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arc...view more Chroma-Chem® 824-0924 is a pigment dispersion for solvent-based coatings. It is Dinitro Orange with the Color Index Name: PO 5, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1013 | Chromaflo Technologies | Chroma-Chem® 824-1013 is a pigment dispersion for solvent-based coatings. It is Venetian Red with the Color Index Name: PR 101, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arc...view more Chroma-Chem® 824-1013 is a pigment dispersion for solvent-based coatings. It is Venetian Red with the Color Index Name: PR 101, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1106 | Chromaflo Technologies | Chroma-Chem® 824-1106 is a pigment dispersion for solvent-based coatings. It is Burnt Sienna with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arch...view more Chroma-Chem® 824-1106 is a pigment dispersion for solvent-based coatings. It is Burnt Sienna with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1315 | Chromaflo Technologies | Chroma-Chem® 824-1315 is a pigment dispersion for solvent-based coatings. It is Burnt Umber with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and archi...view more Chroma-Chem® 824-1315 is a pigment dispersion for solvent-based coatings. It is Burnt Umber with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1803 | Chromaflo Technologies | Chroma-Chem® 824-1803 is a pigment dispersion for solvent-based coatings. It is Raw Sienna with the Color Index Name: PY 43, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and archit...view more Chroma-Chem® 824-1803 is a pigment dispersion for solvent-based coatings. It is Raw Sienna with the Color Index Name: PY 43, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-2003 | Chromaflo Technologies | Chroma-Chem® 824-2003 is a pigment dispersion for solvent-based coatings. It is Raw Umber with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and archite...view more Chroma-Chem® 824-2003 is a pigment dispersion for solvent-based coatings. It is Raw Umber with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-5503 | Chromaflo Technologies | Chroma-Chem® 824-5503 is a pigment dispersion for solvent-based coatings. It is Phthalo Green with the Color Index Name: PG 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arch...view more Chroma-Chem® 824-5503 is a pigment dispersion for solvent-based coatings. It is Phthalo Green with the Color Index Name: PG 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-7209 | Chromaflo Technologies | Chroma-Chem® 824-7209 is a pigment dispersion for solvent-based coatings. It is Phthalo Blue with the Color Index Name: PB 15, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arch...view more Chroma-Chem® 824-7209 is a pigment dispersion for solvent-based coatings. It is Phthalo Blue with the Color Index Name: PB 15, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-7211 | Chromaflo Technologies | Chroma-Chem® 824-7211 is a pigment dispersion for solvent-based coatings. It is Phthalo Blue with the Color Index Name: PB 15, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arch...view more Chroma-Chem® 824-7211 is a pigment dispersion for solvent-based coatings. It is Phthalo Blue with the Color Index Name: PB 15, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-9923 | Chromaflo Technologies | Chroma-Chem® 824-9923 is a pigment dispersion for solvent-based coatings. It is Carbon Black with the Color Index Name: PBk 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arch...view more Chroma-Chem® 824-9923 is a pigment dispersion for solvent-based coatings. It is Carbon Black with the Color Index Name: PBk 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-9946 | Chromaflo Technologies | Chroma-Chem® 824-9946 is a pigment dispersion for solvent-based coatings. It is Lamp Black with the Color Index Name: PBk 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and archit...view more Chroma-Chem® 824-9946 is a pigment dispersion for solvent-based coatings. It is Lamp Black with the Color Index Name: PBk 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-9969 | Chromaflo Technologies | Chroma-Chem® 824-9969 is a pigment dispersion for solvent-based coatings. It is Raven Black with the Color Index Name: PBk 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and archi...view more Chroma-Chem® 824-9969 is a pigment dispersion for solvent-based coatings. It is Raven Black with the Color Index Name: PBk 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-9976 | Chromaflo Technologies | Chroma-Chem® 824-9976 is a pigment dispersion for solvent-based coatings. It is Carbon Black with the Color Index Name: PBk 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and arch...view more Chroma-Chem® 824-9976 is a pigment dispersion for solvent-based coatings. It is Carbon Black with the Color Index Name: PBk 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1302 | Chromaflo Technologies | Chroma-Chem® 824-1302 is a pigment dispersion for solvent-based coatings. It is Burnt Umber with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and archi...view more Chroma-Chem® 824-1302 is a pigment dispersion for solvent-based coatings. It is Burnt Umber with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-0419 | Chromaflo Technologies | Chroma-Chem® 824-0419 is a pigment dispersion for solvent-based coatings. It is Lithol Rubine with the Color Index Name: PR 57:1, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and a...view more Chroma-Chem® 824-0419 is a pigment dispersion for solvent-based coatings. It is Lithol Rubine with the Color Index Name: PR 57:1, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-0440 | Chromaflo Technologies | Chroma-Chem® 824-0440 is a pigment dispersion for solvent-based coatings. It is Barium Lithol Rubine with the Color Index Name: PR 57:1, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industria...view more Chroma-Chem® 824-0440 is a pigment dispersion for solvent-based coatings. It is Barium Lithol Rubine with the Color Index Name: PR 57:1, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1006 | Chromaflo Technologies | Chroma-Chem® 824-1006 is a pigment dispersion for solvent-based coatings. It is a Light Red Oxide with the Color Index Name: PR 101, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial an...view more Chroma-Chem® 824-1006 is a pigment dispersion for solvent-based coatings. It is a Light Red Oxide with the Color Index Name: PR 101, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1012 | Chromaflo Technologies | Chroma-Chem® 824-1012 is a pigment dispersion for solvent-based coatings. It is a Medium Red Oxide with the Color Index Name: PR 101, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial a...view more Chroma-Chem® 824-1012 is a pigment dispersion for solvent-based coatings. It is a Medium Red Oxide with the Color Index Name: PR 101, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1018 | Chromaflo Technologies | Chroma-Chem® 824-1018 is a pigment dispersion for solvent-based coatings. It is a Transparent Red Oxide with the Color Index Name: PR 101, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industr...view more Chroma-Chem® 824-1018 is a pigment dispersion for solvent-based coatings. It is a Transparent Red Oxide with the Color Index Name: PR 101, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1615 | Chromaflo Technologies | Chroma-Chem® 824-1615 is a pigment dispersion for solvent-based coatings. It is Van Dyke Brown - Synthetic with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous indus...view more Chroma-Chem® 824-1615 is a pigment dispersion for solvent-based coatings. It is Van Dyke Brown - Synthetic with the Color Index Name: PBr 7, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1801 | Chromaflo Technologies | Chroma-Chem® 824-1801 is a pigment dispersion for solvent-based coatings. It is a Yellow Oxide with the Color Index Name: PY 42, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and ar...view more Chroma-Chem® 824-1801 is a pigment dispersion for solvent-based coatings. It is a Yellow Oxide with the Color Index Name: PY 42, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1804 | Chromaflo Technologies | Chroma-Chem® 824-1804 is a pigment dispersion for solvent-based coatings. It is a Yellow Oxide LT with the Color Index Name: PY 42, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and...view more Chroma-Chem® 824-1804 is a pigment dispersion for solvent-based coatings. It is a Yellow Oxide LT with the Color Index Name: PY 42, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-1818 | Chromaflo Technologies | Chroma-Chem® 824-1818 is a pigment dispersion for solvent-based coatings. It is a Transparent Yellow Oxide with the Color Index Name: PY 42, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous indus...view more Chroma-Chem® 824-1818 is a pigment dispersion for solvent-based coatings. It is a Transparent Yellow Oxide with the Color Index Name: PY 42, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-2007 | Chromaflo Technologies | Chroma-Chem® 824-2007 is a pigment dispersion for solvent-based coatings. It is LF Medium Yellow with the Color Index Name: PY 74/PY 65, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industria...view more Chroma-Chem® 824-2007 is a pigment dispersion for solvent-based coatings. It is LF Medium Yellow with the Color Index Name: PY 74/PY 65, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| Chroma-Chem® 824-2511 | Chromaflo Technologies | Chroma-Chem® 824-2511 is a pigment dispersion for solvent-based coatings. It is a LF Light Yellow Oxide with the Color Index Name: PY 74, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industri...view more Chroma-Chem® 824-2511 is a pigment dispersion for solvent-based coatings. It is a LF Light Yellow Oxide with the Color Index Name: PY 74, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| Chroma-Chem® 824-0709 | Chromaflo Technologies | Chroma-Chem® 824-0709 is a pigment dispersion for solvent-based coatings. It is Toluidine Red LT with the Color Index Name: PR 3, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and a...view more Chroma-Chem® 824-0709 is a pigment dispersion for solvent-based coatings. It is Toluidine Red LT with the Color Index Name: PR 3, and is part of the Chroma-Chem® 824 Series. These colorants are designed specifically for use in non-aqueous industrial and architectural coatings, including alkyds, wood stains, and NC lacquers. The unique, long-oil alkyd vehicle provides excellent wetting properties. Each colorant contains a carefully selected blend of vehicle, solvent, pigment and surfactants to provide acceptance in a wide range of solvent based applications. view less | Request Sample |
| TEGO® Dispers 690 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 690 is a high molecular weight polymer used as a pigment wetting and dispersing additive. It is designed specifically for solventborne printing inks used in food packaging. By using this product in solventborne, PU-containing or binder-free ...view more TEGO® Dispers 690 is a high molecular weight polymer used as a pigment wetting and dispersing additive. It is designed specifically for solventborne printing inks used in food packaging. By using this product in solventborne, PU-containing or binder-free pigment dispersions, high pigment loadings can be achieved due to strong viscosity reduction. TEGO® Dispers 690 is highly compatible with various PU and NC binder types and works well with organic pigments, carbon blacks and titanium dioxide. It is also especially effective in gravure and flexo inks for lamination applications. view less | Request Sample |
| AFCONA - 2040 | AFCONA Additives Sdn Bhd | AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side ...view more AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side effects. AFCONA – 2040 finds application in low to high polar paint systems, physical drying systems based on acrylic, vinyl, or chlorinated polymers, in polyurethane wood, plastic, and car refinishes, in airless spraying coats, in NC lacquers and acid curing wood and general industrial coatings, in stoving paints, in solvent-based epoxy systems, and in printing inks. view less | |
| AFCONA - 2045 | AFCONA Additives Sdn Bhd | AFCONA – 2045 is a silicone-based defoamer in a xylene and butyl acetate solvent. This clear to slightly yellow liquid prevents the formation of foam and blisters during the manufacture of difficult applications including airless spray, and brush and roll...view more AFCONA – 2045 is a silicone-based defoamer in a xylene and butyl acetate solvent. This clear to slightly yellow liquid prevents the formation of foam and blisters during the manufacture of difficult applications including airless spray, and brush and roller. AFONCA – 2045 has a transparent appearance and finds application in polyurethane clear coatings, in polyurethane systems for wood, plastic and car refinishes, in airless spray coatings, in NC lacquer and acid curing for wood and general industrial coatings, in stoving paints for general industrial purposes, and in solvent-based epoxy systems. view less | |
| AFCONA - 2018 | AFCONA Additives Sdn Bhd | AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing a...view more AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing and is widely compatible, making it suitable for use in clear and high gloss coatings, and can be used in resin manufacturing as a pre-added defoamer. AFCONA – 2018 finds application in polyurethane coatings for wood, acid-curing coatings for wood and etching/wash primers, and in NC lacquers for wood. view less | |
| PChem® MB-247 | Pioneer Chemicals Co., Ltd. | PChem® MB-247, in the form of a bead, is a resin that offers properties of high durability, high heat resistance, and high hardness because of its high molecular weight of 450,000 g/mol and composition design. It is compatible with numerous nitrocellulose...view more PChem® MB-247, in the form of a bead, is a resin that offers properties of high durability, high heat resistance, and high hardness because of its high molecular weight of 450,000 g/mol and composition design. It is compatible with numerous nitrocellulose and solvents, and is commonly used in applications of spacers, casting, and for coatings where chemical resistance especially for alcohol and petroleum are required. PChem® MB-247 has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 1.25. view less | |
| PChem® MB-250 | Pioneer Chemicals Co., Ltd. | PChem® MB-250, in the form of a bead, is a resin that offers properties of high durability, high heat resistance, and high hardness because of its high molecular weight of 301,000 g/mol and composition design. It is compatible with numerous nitrocellulose...view more PChem® MB-250, in the form of a bead, is a resin that offers properties of high durability, high heat resistance, and high hardness because of its high molecular weight of 301,000 g/mol and composition design. It is compatible with numerous nitrocellulose and solvents, and is commonly used in applications of spacers, casting, and for coatings where chemical resistance especially for alcohol and petroleum are required. PChem® MB-250 has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 1.01. view less | |
| PChem® BM164 | Pioneer Chemicals Co., Ltd. | PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, ...view more PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, marine coating, plastic coating, concrete cure, and is suitable for dear coating of exterior and interior concrete floors and road surface. PChem® BM164 has a molecular weight of 92,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.40. view less | |
| Colortrend® Unipearl® 835-1234 | Chromaflo Technologies | Colortrend® 835-1234 is a Pearlescent Gold pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and water-based coatings. They can be used either by themselves in a glaze or neutral base over a colored substrate or in combination with Colortrend® colorants. Unipearl® colorants are designed for use in faux finishes, decorative coatings, wall coverings and specialty finishes. They are compatible with nitrocellulose...view more Colortrend® 835-1234 is a Pearlescent Gold pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and water-based coatings. They can be used either by themselves in a glaze or neutral base over a colored substrate or in combination with Colortrend® colorants. Unipearl® colorants are designed for use in faux finishes, decorative coatings, wall coverings and specialty finishes. They are compatible with nitrocellulose lacquers, epoxy alkyd, acrylic latex, catalyzed and water reducible urethane coatings. view less | Request Sample |
| EFKA® SL 3210 | BASF Formulation Additives | EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA® SL 3210 is relatively insensitive to pinholing - even at high concentrations of the additive. This clear, colorless liquid may be used in water-based, solvent-based and UV-curable printing inks and over-print varnishes. EFKA® SL 3210 is especially effective in nitrocellulose...view more EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA® SL 3210 is relatively insensitive to pinholing - even at high concentrations of the additive. This clear, colorless liquid may be used in water-based, solvent-based and UV-curable printing inks and over-print varnishes. EFKA® SL 3210 is especially effective in nitrocellulose-based systems for flexographic and gravure printing. It is also effective in UV flexographic printing. view less | |
| Colortrend® Unipearl® 835-0134 | Chromaflo Technologies | Colortrend® Unipearl® 835-0134 is a Pearlescent Silver pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and water-based coatings. They can be used either by themselves in a glaze or neutral base over a colored substrate or in combination with Colortrend® colorants. Unipearl® colorants are designed for use in faux finishes, decorative coatings, wall coverings and specialty finishes. They are compatible with nitrocellulose...view more Colortrend® Unipearl® 835-0134 is a Pearlescent Silver pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and water-based coatings. They can be used either by themselves in a glaze or neutral base over a colored substrate or in combination with Colortrend® colorants. Unipearl® colorants are designed for use in faux finishes, decorative coatings, wall coverings and specialty finishes. They are compatible with nitrocellulose lacquers, epoxy alkyd, acrylic latex, catalyzed and water reducible urethane coatings. view less | Request Sample |
| Colortrend® Unipearl® 835-1734 | Chromaflo Technologies | Colortrend® Unipearl® 835-1734 is a Pearlescent Copper Penny pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and water-based coatings. They can be used either by themselves in a glaze or neutral base over a colored substrate or in combination with Colortrend® colorants. Unipearl® colorants are designed for use in faux finishes, decorative coatings, wall coverings and specialty finishes. They are compatible with nitrocellulose...view more Colortrend® Unipearl® 835-1734 is a Pearlescent Copper Penny pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and water-based coatings. They can be used either by themselves in a glaze or neutral base over a colored substrate or in combination with Colortrend® colorants. Unipearl® colorants are designed for use in faux finishes, decorative coatings, wall coverings and specialty finishes. They are compatible with nitrocellulose lacquers, epoxy alkyd, acrylic latex, catalyzed and water reducible urethane coatings. view less | Request Sample |
| EFKA® PA 4401 | BASF Formulation Additives | EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from low- to high-polarity systems, including nitrocellulose...view more EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from low- to high-polarity systems, including nitrocellulose. Care should be taken with EFKA® PA 4401 because of its tendency to yellowing and gelling when combined with chlorinated polymers. It also has a tendency to yellowing when combined with solvent-free epoxies. EFKA® PA 4401 is used for all kinds of high-quality solvent-based industrial coatings including automotive topcoats as well as pigment concentrates. view less | |
| AFCONA - 2023 | AFCONA Additives Sdn Bhd | AFCONA – 2023 is a silicone-based defoaming polymer in a methoxy propyl acetate and alkylbenzene solvent. This clear to slightly yellow liquid functions as a moderate defoamer with minimum side effects while preventing the formation of foam and blisters d...view more AFCONA – 2023 is a silicone-based defoaming polymer in a methoxy propyl acetate and alkylbenzene solvent. This clear to slightly yellow liquid functions as a moderate defoamer with minimum side effects while preventing the formation of foam and blisters during the manufacture and application of solvent-based coatings. AFCONA – 2023 is suitable for low to high polar systems, and finds application in two-pack polyurethane systems for wood and general industrial finishes, NC and acid curing wood systems, industrial coatings such as baking enamels, acrylic thermosetting, and oil-free polyester systems, and in air drying long and medium oil alkyds. view less | |
| AFCONA - 5209 | AFCONA Additives Sdn Bhd | AFCONA – 5209 is a fatty acid polyamide appearing as a transparent yellow to brown liquid. This product functions as an anionic and catatonic wetting and dispersing additive to improve the wetting of pigment surfaces by preventing interfacial tension betw...view more AFCONA – 5209 is a fatty acid polyamide appearing as a transparent yellow to brown liquid. This product functions as an anionic and catatonic wetting and dispersing additive to improve the wetting of pigment surfaces by preventing interfacial tension between the hydrophilic pigments, extenders, and the binder, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5209 provides anti-settling and anti-sagging properties in bentonite gelling, and finds application in primers, decorative paints, marine paints, and heavy-duty paints, and in long, medium, and short oils, NC, TPA, acid curing, polyurethane, and epoxy systems. view less | |
| LAROPAL® A 101 | BASF Dispersions & Resins | LAROPAL A 101 is an aldehyde resin for pigment dispersions. Because of its excellent solubility and compatibility, LAROPAL A 101 can be used in many types of coating formulations. Depending on the application, it improves gloss, hardness, body, adhesion, and resistance to yellowing. Because of its good pigment wetting and very low solution viscosity, LAROPAL A 101 can be used for the manufacture of pigment pastes with high pigment content. This product is not soluble in aliphatic hydrocarbons and therefore, is suitable for coatings resistant to mineral oils. Because of its relatively low solvent retention, it only leads to a slight increase of the drying time of lacquer finishes (e.g. nitrocellulose...view more LAROPAL A 101 is an aldehyde resin for pigment dispersions. Because of its excellent solubility and compatibility, LAROPAL A 101 can be used in many types of coating formulations. Depending on the application, it improves gloss, hardness, body, adhesion, and resistance to yellowing. Because of its good pigment wetting and very low solution viscosity, LAROPAL A 101 can be used for the manufacture of pigment pastes with high pigment content. This product is not soluble in aliphatic hydrocarbons and therefore, is suitable for coatings resistant to mineral oils. Because of its relatively low solvent retention, it only leads to a slight increase of the drying time of lacquer finishes (e.g. nitrocellulose). view less | |
| PChem® MB-313 | Pioneer Chemicals Co., Ltd. | PChem® MB-313, in the form of a bead, is an acrylic resin that is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is very compatible with wide variety of other resins including nitrocellulose, acrylics, and vinyl. It provid...view more PChem® MB-313, in the form of a bead, is an acrylic resin that is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is very compatible with wide variety of other resins including nitrocellulose, acrylics, and vinyl. It provides admirable fast drying characteristics and solvent release ability and it has good pigment wetting properties when used in coating and ink formulations. PChem® MB-313 is for universal applications of exterior paints and metal coatings. It has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 9 mgKOH/g, and an inherent viscosity of 0.23. view less | |
| PChem® BM11 | Pioneer Chemicals Co., Ltd. | PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM11 is compatible with many nitrocellulose...view more PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM11 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, printing inks for soft PVC, and leather finishes. It has a molecular weight of 85,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.36. view less | |
| PChem® BM17 | Pioneer Chemicals Co., Ltd. | PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM17 is compatible with many nitrocellulose...view more PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM17 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, and inks for smoking materials. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. view less | |
| PChem® BM82 | Pioneer Chemicals Co., Ltd. | PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a b...view more PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive layer). PChem® BM82 has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.37. view less | |
| PChem® BM131 | Pioneer Chemicals Co., Ltd. | PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM131 is compatible with many nitrocellulose...view more PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM131 is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks. marine coating, plastic coating, gravure inks, and good for flexographic inks. It has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. view less | |
| PChem® MB-38 | Pioneer Chemicals Co., Ltd. | PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including chlorinated rubber resins, nitrocellulose...view more PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including chlorinated rubber resins, nitrocellulose, acrylics, vinyl, and is a good binder for manufacturer of alkyd resins additive, printing inks, heat sealing lacquers for adhesives and aluminum foils, ceramic transfer lacquers, and primers. PChem® MB-38 has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.31. view less | |
| PChem® BM60 | Pioneer Chemicals Co., Ltd. | PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose...view more PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 10.0 mgKOH/g, and an inherent viscosity of 0.18. view less | |
| PChem® BM60E | Pioneer Chemicals Co., Ltd. | PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose...view more PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 35,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 8.5 mgKOH/g, and an inherent viscosity of 0.17. view less | |
| PChem® BM81 | Pioneer Chemicals Co., Ltd. | PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose...view more PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of silk screen printing inks, marine coating, inks, gravure inks, and plastic coating. PChem® BM81 has a molecular weight of 30,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.12. view less | |
| PChem® BM66 | Pioneer Chemicals Co., Ltd. | PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose...view more PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, concrete coatings, marine coating, plastic coating, gravure inks, silk screen printing inks. PChem® BM66 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.27. view less | |
| Chisorb® 336 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 336 is an ultraviolet light absorber for plastics and coatings. Due to its vivid absorption in the UV range (λmax.= 303 nm), Chisorb® 336 will protect many polymers. It is particularly effectively against the high-energy/short wave UV radiation. At higher concentrations, Chisorb® 336 will broaden its absorption wavelengths up to about 380 nm without causing any adverse effects on the initial natural color of the substrates being stabilized. This clear, yellowish, viscous liquid is suggested to be used in plasticized PVC, PVC plastisols, unsaturated polyesters, silicone emulsions, nitrocellulose...view more Chisorb® 336 is an ultraviolet light absorber for plastics and coatings. Due to its vivid absorption in the UV range (λmax.= 303 nm), Chisorb® 336 will protect many polymers. It is particularly effectively against the high-energy/short wave UV radiation. At higher concentrations, Chisorb® 336 will broaden its absorption wavelengths up to about 380 nm without causing any adverse effects on the initial natural color of the substrates being stabilized. This clear, yellowish, viscous liquid is suggested to be used in plasticized PVC, PVC plastisols, unsaturated polyesters, silicone emulsions, nitrocellulose lacquer, liquid inks, acrylic, vinyl and other adhesives, acrylic resin, urea formaldehyde resins, alkyd paint, PUR systems, etc. view less | |
| PChem® MB-4 | Pioneer Chemicals Co., Ltd. | PChem® MB-4, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-4 is very compatible with various nitrocellulose...view more PChem® MB-4, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-4 is very compatible with various nitrocellulose and solvents, and is generally used in applications of metal coatings, marine coating, silk screen printing inks, plastic coating, and gravure inks. It has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.18. view less | |
| PChem® MB-6-A | Pioneer Chemicals Co., Ltd. | PChem® MB-6-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-6-A is very compatible with various nitrocellulose...view more PChem® MB-6-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-6-A is very compatible with various nitrocellulose and solvents, and is generally used in applications of metal coatings, marine coating, silk screen printing inks, plastic coating, and gravure inks. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.24. view less | |
| PChem® MB-17 | Pioneer Chemicals Co., Ltd. | PChem® MB-17, in the form of a bead, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® MB-17 is very compatible with many nitrocellulose...view more PChem® MB-17, in the form of a bead, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® MB-17 is very compatible with many nitrocellulose and solvents, and commonly used in applications of silk screen printing inks, marine coating, gravure inks, plastic coating, multi-usage ink, and tobacco packaging ink. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.41. view less | |
| PChem® BM111 | Pioneer Chemicals Co., Ltd. | PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be dissolved into methyl methacrylate monomer and other ingredients to form a prepolymer syrup for casting applications and is compatible with many nitrocellulose...view more PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be dissolved into methyl methacrylate monomer and other ingredients to form a prepolymer syrup for casting applications and is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks, plastic coating, marine coating. PChem® BM111 has a molecular weight of 110,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.48. view less | |
| PChem® MB-10-B | Pioneer Chemicals Co., Ltd. | PChem® MB-10-B, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It has good compatibility with numerous nitrocellulose and solvents and good adhesion to aluminum substr...view more PChem® MB-10-B, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It has good compatibility with numerous nitrocellulose and solvents and good adhesion to aluminum substrates. PChem® MB-10-B is commonly used in applications of inks for lithographic heat transfers, inks for PET coated films and papers, ceramic transfer printing inks, containers and packaging, aerosol paints, adhesives, coatings on aluminum foils, and packaging inks. It has a molecular weight of 160,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.45. view less | |
| Pchem® BM24G | Pioneer Chemicals Co., Ltd. | Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging variety of other resins including maleinate resins, acrylics, nitrocellulose...view more Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging variety of other resins including maleinate resins, acrylics, nitrocellulose, vinyl, and chlorinated rubber. Pchem® BM24G is a binder for manufacturer of printing inks, primers, ceramic transfer lacquers, heat sealing lacquers for aluminum foils and adhesives, and ceramic and glass transfer printing lacquers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.46. view less | |
| PChem® BM66D | Pioneer Chemicals Co., Ltd. | PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose...view more PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of road marking, marine coating, plastic coating, PVC printing inks, gravure inks, paints for wall, and silk screen printing inks. PChem® BM66D has a molecular weight of 45,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.25. view less | |
| PChem® BM72 | Pioneer Chemicals Co., Ltd. | PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose...view more PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM72 has a molecular weight of 32,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.15. view less | |
| PChem® BM76 | Pioneer Chemicals Co., Ltd. | PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose...view more PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of marine coating, concrete sealer, wood coating, plastic coating, seamless flooring, protective coatings, gravure inks, and silk screen printing inks. PChem® BM76 has a molecular weight of 105,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 8.0 mgKOH/g, and an inherent viscosity of 0.37. view less | |
| PChem® BM71 | Pioneer Chemicals Co., Ltd. | PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose...view more PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, PVC replacement in automotive plastisol, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM71 has a molecular weight of 100,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.54. view less | |
| EFKA® FA 4654 | BASF Formulation Additives | EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin combinations and epoxies. EFKA® FA 4654 can cause discoloration in nitrocellulose...view more EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin combinations and epoxies. EFKA® FA 4654 can cause discoloration in nitrocellulose varnishes. view less | |
| AFCONA - 2025 | AFCONA Additives Sdn Bhd | AFCONA – 2025 is a silicone-containing defoaming polymer with fluorocarbon in a cyclohexanone solvent. This clear to slightly yellow liquid functions as a moderate defoamer with minimum side effects which prevents the formation of foam and blistering duri...view more AFCONA – 2025 is a silicone-containing defoaming polymer with fluorocarbon in a cyclohexanone solvent. This clear to slightly yellow liquid functions as a moderate defoamer with minimum side effects which prevents the formation of foam and blistering during manufacturing and application. AFCONA – 2025 is widely compatible, can be used in systems ranging from low to high polarity, and finds application in air drying alkyd systems and physical drying systems based on acrylic, vinyl or chlorinated polymers, in polyurethane systems for wood, plastic and car refinishes, in NC lacquers and acid curing applications for wood and general industrial coatings, in two-pack solvent-based epoxies, and in baking paints based on alkyd, acrylic and saturated polyesters. view less | |
| MB-8 | Pioneer Chemicals Co., Ltd. | MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several org...view more MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several organic solvents including ketones, aromatic hydrocarbons, esters, and has good compatibility with plasticizers, NC, CAB, and vinyl resin. MB-8 is broadly applied in leather treating agent, gilding material coatings, plastic coatings, printing inks, and PVC printing inks and coatings. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.37 to 0.43. view less | |
| PChem® MB-18 | Pioneer Chemicals Co., Ltd. | PChem® MB-18, in the form of a bead, is a copolymer of methacrylates that is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, and esters. It also has admirable compatibility and good solvent release ability with other fi...view more PChem® MB-18, in the form of a bead, is a copolymer of methacrylates that is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, and esters. It also has admirable compatibility and good solvent release ability with other film forming resins, such as plasticizer, NC, and CAB. PChem® MB-18 offers admirable performance on plasticizer migration resistance, alcohol resistance, weather-ability, and durability and is commonly used in plastic coatings where alcohol resistance is firmly required. It has a molecular weight of 93,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.41. view less | |
| MB-18-A | Pioneer Chemicals Co., Ltd. | MB-18-A, in the form of a bead, is a copolymer of methacrylates that offers admirable performance on plasticizer migration resistance, weather-ability, alcohol resistance, durability. It is easily soluble in numerous organic solvents such as aromatic hydr...view more MB-18-A, in the form of a bead, is a copolymer of methacrylates that offers admirable performance on plasticizer migration resistance, weather-ability, alcohol resistance, durability. It is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, esters, and it has admirable compatibility and good solvent release ability with other film forming resins, such as plasticizer, NC, and CAB. MB-18-A is commonly used in PVC inks, toy coatings, and plastic coatings where alcohol resistance is strictly required. It has a molecular weight of 120,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.46 to 0.53. view less | |
| MB-45 | Pioneer Chemicals Co., Ltd. | MB-45, in the form of a bead, is a copolymer of methyl methacrylate that offers outstanding performance of chemical resistance, flexibility, and cold resistance. It is easily soluble in numerous organic solvents such as chlorinated solvent, ketones, aroma...view more MB-45, in the form of a bead, is a copolymer of methyl methacrylate that offers outstanding performance of chemical resistance, flexibility, and cold resistance. It is easily soluble in numerous organic solvents such as chlorinated solvent, ketones, aromatic hydrocarbons, esters, and it has good compatibility with other film forming resins such as plasticizer, NC, vinyl resin, and chlorinated rubber. MB-45 is mainly used in color string, adhesives, aerosol spray, and more. It has a molecular weight of 160,000 to 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.77 to 0.85. view less | |
| BM61A | Pioneer Chemicals Co., Ltd. | BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...view more BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. view less | |
| PChem® BM-97 | Pioneer Chemicals Co., Ltd. | PChem® BM-97, in the form of a powder, is a copolymer of methacrylates that offers good performance on weather-ability, alcohol resistance, and durability and is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, and ester...view more PChem® BM-97, in the form of a powder, is a copolymer of methacrylates that offers good performance on weather-ability, alcohol resistance, and durability and is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, and esters. It has decent solvent release ability and good compatibility with other film forming resins, such as plasticizer, NC, CAB, and is generally used in structure adhesives, PVC pipe adhesive, plastic coatings where alcohol resistance is firmly required. PChem® BM-97 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 14 mgKOH/g, and an inherent viscosity of 0.20. view less | |
| PIGMENT RED 22 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 22 is a yellowish-red pigment with C.I. No. PR22. Its main market is in textile printing, but it is also used throughout the graphics field, such as in offset and gravure printing, especially in NC-based inks. PIGMENT RED 22 is advantageous wh...view more PIGMENT RED 22 is a yellowish-red pigment with C.I. No. PR22. Its main market is in textile printing, but it is also used throughout the graphics field, such as in offset and gravure printing, especially in NC-based inks. PIGMENT RED 22 is advantageous where soap and alkali resistance are required. This product has high tinctorial strength, and is somewhat lighter than C.I.NO.:PR9, PIGMENT RED 9 in high pigment area concentrations; while at lower pigment area concentrations it is yellower. The paint industry employs PIGMENT RED 22 in air drying systems, in emulsion paints, and occasionally in industrial finishes. Areas of application include paper mass and surface coloration, colored pencils, artists’ colors, and other purposes. view less | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose...view more KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. view less | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose...view more KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. view less | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose...view more KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. view less | |
| AFCONA - 2035 | AFCONA Additives Sdn Bhd | AFCONA – 2035 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid functions as a moderate defoamer with minimal side effects which prevents the formation of foam and blistering during manufacturing and app...view more AFCONA – 2035 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid functions as a moderate defoamer with minimal side effects which prevents the formation of foam and blistering during manufacturing and application. This product is widely compatible, and is recommended for use in medium viscosity systems, and in systems ranging from low to high polarity. AFCONA - 2035 finds application in air drying alkyd systems and physical drying systems based on acrylic, vinyl or chlorinated polymers, in polyurethane systems for wood, plastic and car refinishes, in NC lacquers and acid curing applications for wood and general industrial coatings, in two-pack solvent-based epoxies, and in baking paints based on alkyd, acrylic and saturated polyesters. view less | |
| MB-10 | Pioneer Chemicals Co., Ltd. | MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility wit...view more MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility with other film forming resins such as vinyl resin, NC, and chlorinated rubber. MB-10 is mainly used in containers and packaging, functional coatings and inks, inks for PET coated films and papers, especially suitable for aluminum substrate coatings and inks for lithographic heat transfers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 9.0 mgKOH/g, and an inherent viscosity of 0.47 to 0.56. view less | |
| MB-2 | Pioneer Chemicals Co., Ltd. | MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in sever...view more MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in several organic solvents including esters, chlorinated solvents ketones, aromatic hydrocarbons, and it has good compatibility with other film forming resins such as plasticizers, vinyl resin and NC. MB-2 is broadly used in PVC printing inks, masonry coatings, PVC processing, upholstery, floor coatings, gravure inks, PVC top coatings, and road marking. It has a molecular weight of 140,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.62 to 0.68. view less | |
| BM61 | Pioneer Chemicals Co., Ltd. | BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...view more BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. view less | |
| ACRONAL® 700 L | BASF Dispersions & Resins | ACRONAL 700 L is a soft acrylic resin solution, resistant to light and aging, for plasticizing cellulose nitrate and chlorine-containing binders for coatings with good flexibility and excellent adhesion. Coatings based on it are well resistant to boiling water. It is dissolved in 50% ethyl acetate that is used as a plasticizer for industrial coating applications. ACRONAL 700 L approx. 50% in ethyl acetate is used, particularly in combination with nitrocellulose...view more ACRONAL 700 L is a soft acrylic resin solution, resistant to light and aging, for plasticizing cellulose nitrate and chlorine-containing binders for coatings with good flexibility and excellent adhesion. Coatings based on it are well resistant to boiling water. It is dissolved in 50% ethyl acetate that is used as a plasticizer for industrial coating applications. ACRONAL 700 L approx. 50% in ethyl acetate is used, particularly in combination with nitrocellulose, for formulating paper and film coatings, sealing wax, coatings for light metals and plastics and cellulose lacquers. Combined with chlorinated binders such as the LAROFLEX® MP grades, it yields coatings that are very resistant to hydrolysis for various substrates such as metals, concrete, or fiber cement. ACRONAL 700 L approx. 50% in ethyl acetate may also be used as a permanent plasticizer in urethane sealants or coatings. In many coating systems, it will improve the adhesion of primers. view less | |
| EFKA® PB 2001 | BASF Formulation Additives | EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001 is used in nitrocellulose...view more EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001 is used in nitrocellulose lacquers, particularly those applied on curtain coaters, 1- or 2-component acid curing wood coatings, particularly fast drying types applied on curtain coaters, acrylic resin finishes, air drying epoxy resin paints and unsaturated polyester. The paint industry uses defoamers to ensure that air bubbles occurring during application of lacquers and paints can escape from the film while still wet. The formation of craters is thus substantially eliminated. One must differentiate between: bubbles which originate from the substrate (wood and paper are typical examples), and bubbles which may be generated in the paint by pumping, rolling, airless spraying or curtain coating. view less | |
| Temacolor™ HP 1004 | Chromaflo Technologies | Temacolor™ HP 1004 is a white colorant with the color index number PW 6 and a 60% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose...view more Temacolor™ HP 1004 is a white colorant with the color index number PW 6 and a 60% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose, polyurethane, CAB, short oil alkyd and acid curing systems. Most Temacolor™ HP colorants are formulated without the use of aromatic solvents. Pigment selection is based on the high requirements of industrial coating systems. Even the use of high amounts of Temacolor™ HP (up to 30 percent) will only have minimal impact on the system properties such as gloss, pot life, hardness, viscosity, sagging and drying time. All Temacolor™ HP colorants are calibrated by volume and weight. This makes them suitable for use in In-Plant and POS tinting systems. view less | Request Sample |
| Temacolor™ HP 1010 | Chromaflo Technologies | Temacolor™ HP 1010 is a black colorant with the color index number PBk 7 and a 27% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose...view more Temacolor™ HP 1010 is a black colorant with the color index number PBk 7 and a 27% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose, polyurethane, CAB, short oil alkyd and acid curing systems. Most Temacolor™ HP colorants are formulated without the use of aromatic solvents. Pigment selection is based on the high requirements of industrial coating systems. Even the use of high amounts of Temacolor™ HP (up to 30 percent) will only have minimal impact on the system properties such as gloss, pot life, hardness, viscosity, sagging and drying time. All Temacolor™ HP colorants are calibrated by volume and weight. This makes them suitable for use in In-Plant and POS tinting systems. view less | Request Sample |
| Temacolor™ HP 1012 | Chromaflo Technologies | Temacolor™ HP 1012 is a black colorant with the color index number PBk 7 and a 14% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose...view more Temacolor™ HP 1012 is a black colorant with the color index number PBk 7 and a 14% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose, polyurethane, CAB, short oil alkyd and acid curing systems. Most Temacolor™ HP colorants are formulated without the use of aromatic solvents. Pigment selection is based on the high requirements of industrial coating systems. Even the use of high amounts of Temacolor™ HP (up to 30 percent) will only have minimal impact on the system properties such as gloss, pot life, hardness, viscosity, sagging and drying time. All Temacolor™ HP colorants are calibrated by volume and weight. This makes them suitable for use in In-Plant and POS tinting systems. view less | Request Sample |
| Temacolor™ HP 1022 | Chromaflo Technologies | Temacolor™ HP 1022 is a yellow oxide colorant with the color index number PY 42 and a 57% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose...view more Temacolor™ HP 1022 is a yellow oxide colorant with the color index number PY 42 and a 57% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose, polyurethane, CAB, short oil alkyd and acid curing systems. Most Temacolor™ HP colorants are formulated without the use of aromatic solvents. Pigment selection is based on the high requirements of industrial coating systems. Even the use of high amounts of Temacolor™ HP (up to 30 percent) will only have minimal impact on the system properties such as gloss, pot life, hardness, viscosity, sagging and drying time. All Temacolor™ HP colorants are calibrated by volume and weight. This makes them suitable for use in In-Plant and POS tinting systems. view less | Request Sample |
| Temacolor™ HP 1024 | Chromaflo Technologies | Temacolor™ HP 1024 is a yellow oxide colorant with the color index number PY 42 and a 50% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose...view more Temacolor™ HP 1024 is a yellow oxide colorant with the color index number PY 42 and a 50% pigment content. It is part of Chromaflo's Temacolor™ HP Series, which are based on acrylic resins and provide a broad compatibility profile. They are specially designed for all solvent-based one- and two-component coatings, as well as industrial wood finishes. Temacolor™ HP is compatible with coatings based on nitrocellulose, polyurethane, CAB, short oil alkyd and acid curing systems. Most Temacolor™ HP colorants are formulated without the use of aromatic solvents. Pigment selection is based on the high requirements of industrial coating systems. Even the use of high amounts of Temacolor™ HP (up to 30 percent) will only have minimal impact on the system properties such as gloss, pot life, hardness, viscosity, sagging and drying time. All Temacolor™ HP colorants are calibrated by volume and weight. This makes them suitable for use in In-Plant and POS tinting systems. view less | Request Sample |
