LoVOCoat Stable 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Stable 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in water. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
LoVOCoat Form 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Form 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in Exxsol D80. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
Maxemul™ 7000 Series | Croda Coatings & Polymers | Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory dir...view more Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory directives will dramatically change the coatings market in the coming years and solvent-borne resins could disappear. One use of these polymeric non-migratory or reactive emulsifiers is to produce zero VOC resin emulsions to overcome these regulatory issues. view less | |
Solplus™ D610 | Lubrizol Advanced Materials, Inc. | Solplus™ D610 is a 100% active polymeric dispersant which will improve dispersion and stability. | |
BURGESS NO. 50® | Burgess Pigment Company | BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...view more BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. view less | |
Alcure® 4470 | Polynt Composites | Alcure® 4470 is a polymeric aliphatic isocyanate hardener based on IPDI and blocked with triazole. | |
DISPEX® AA 4030 | BASF Formulation Additives | DISPEX® AA 4030 is an effective polymeric dispersing agent based on acrylic acid ammonium salt. | |
DISPEX® AA 4135 NA | BASF Formulation Additives | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
SETALUX® 10-1387 | Allnex | SETALUX® 10-1387 is a non-aqueous dispersion of highly cross-linked acrylic polymeric particles. | Request Sample |
Alcure® 4400 | Polynt Composites | Alcure® 4400 is a polymeric aliphatic isocyanate hardener based on IPDI and blocked with e-caprolactam. | |
Alcure® 4402 | Polynt Composites | Alcure® 4402 is a polymeric aliphatic isocyanate hardener based on IPDI and blocked with e-caprolactam. | |
Alcure® 4430 | Polynt Composites | Alcure® 4430 is a polymeric aliphatic isocyanate hardener based on H12MDI and blocked with e-caprolactam. | |
Alcure® 4431 | Polynt Composites | Alcure® 4431 is a polymeric aliphatic isocyanate hardener based on H12MDI and blocked with e-caprolactam. | |
Alcure® 4450 | Polynt Composites | Alcure® 4450 is a polymeric aliphatic isocyanate hardener based on TDI and blocked with e-caprolactam. | |
Solplus™ DP310 | Lubrizol Advanced Materials, Inc. | Solplus™ DP310 is a 100% active polymeric dispersant which will improve pigment dispersion and stability in thermoplastics. | |
JEFFSPERSE® X3503 Dispersant | Huntsman Performance Products | JEFFSPERSE® X3503 Dispersant is a nonionic polymeric dispersant for water-based coatings, inkjet inks and pigment concentrates. | |
JEFFSPERSE® 4105 DISPERSANT | Huntsman Performance Products | JEFFSPERSE® 4105 dispersant is a nonionic, polymeric dispersant for water-based coatings, inks and general pigment concentrates. | |
DISPEX® AA 4935 | BASF Formulation Additives | DISPEX® AA 4935 is a polymeric dispersing agent based on acrylic acid sodium salt in powder form. | |
Speedcure 7010-L | Sartomer Americas | SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when use...view more SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-10 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
Zephrym™ PD 7000 | Croda Coatings & Polymers | Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dis...view more Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dispersion of carbon black, inorganic pigments and fillers, and for use in electronics and adhesives applications. view less | |
BYK®-C 8000 | BYK | Polymeric coupling agent to improve mechanical strength in filled radical curing sytems. Solution of a copolymer with functional groups. | Request Sample |
SLIP-AYD® SL 425 | Elementis | SLIP-AYD® SL 425 is a fine particle size waterborne/solventborne dispersion of hard polymeric wax in xylene solvent and polymeric plastisizer. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in wide ra...view more SLIP-AYD® SL 425 is a fine particle size waterborne/solventborne dispersion of hard polymeric wax in xylene solvent and polymeric plastisizer. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in wide range solvent based applications. It may be used in high gloss systems with very little effect on gloss. view less | Request Sample |
SILCOLEASE XL 325 | Elkem Silicones | SILCOLEASE XL 325 is a methyl hydrogen silicone polymeric based product used as a crosslinker for solventless polyaddition SILCOLEASE systems. | |
SILCOLEASE XL 327 | Elkem Silicones | SILCOLEASE XL 327 is a methyl hydrogen silicone polymeric based product used as a crosslinker for solventless polyaddition SILCOLEASE systems. | |
EMULTROL DFM PG-100 FR | Concentrol, S.A., Productos | EMULTROL DFM PG-100 FR is a silicone-free polymeric antifoam formulated to control the foam creation in aqueous systems. | |
SONGSORB® CS 944 | SONGWON Industrial Group | SONGSORB® CS 944 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications. | |
Solsperse™ 76700 | Lubrizol Advanced Materials, Inc. | Solsperse™ 76700 is a 50% active polymeric dispersant in ethyl acetate which will improve pigment dispersion and stability in liquid organic media. | |
Solplus™ D560 | Lubrizol Advanced Materials, Inc. | Solplus™ D560 is a 100% active polymeric dispersant used for the dispersion of inorganic pigments and fillers into Unsaturated Polyester and Epoxy systems. | |
Solsperse™ W100 | Lubrizol Advanced Materials, Inc. | Solsperse™ W100 is a 40% active APE-free polymeric dispersant in water, which will improve dispersion and stability in aqueous coatings and colorants. | |
Solsperse™ WV400 | Lubrizol Advanced Materials, Inc. | Solsperse™ WV400 is a 40% active APE-free polymeric dispersant in water, which will improve dispersion and stability in aqueous coatings and colorants. | |
Solsperse™ 75500 | Lubrizol Advanced Materials, Inc. | Solsperse™ 75500 is a 40% active polymeric dispersant in n-butyl acetate which will improve pigment dispersion and stability in liquid organic media. | |
Solsperse™ 84500 | Lubrizol Advanced Materials, Inc. | Solsperse™ 84500 is a 50% active polymeric dispersant in methoxy propyl acetate which will improve pigment dispersion and stability in liquid organic media. | |
Hypermer A70 | Croda Coatings & Polymers | Hypermer A70 is a polymeric O/W emulsifier and dispersant in non polar liquids for superior colloidal stability and minimum impact on coating properties. | |
TEGO® Powder Aid D01 | Evonik Operations GmbH, BL Coating Additives | TEGO® Powder Aid D01 is a solid multifunctional polymeric additive for powder coatings. It provides pigment wetting, reduced melt viscosity, improved gloss, and leveling. | Request Sample |
Sunoxy CPL | Yantai Suny Chem International Co., Ltd. | Sunoxy CPL is a highly effective, polymeric, non-discoloring phenolic antioxidant. It is similar to Lowinox CPL, and very suitable for ABS and latex applications. | |
PLACCEL H1P | Daicel (U.S.A.), Inc. | PLACCEL H1P is polycaprolactone diol and its molecular weight is 10000. PLACCEL H1P is thermoplastic resin and easy to transform into any shape under more than 60℃, because the melting point of this product is lower than other plastics. In addition, PLACCEL H1P is ecological plastic because of its biodegradability. PLACCEL H1P can be processed by extrusion or injection molding machines into polymeric films, polymeric...view more PLACCEL H1P is polycaprolactone diol and its molecular weight is 10000. PLACCEL H1P is thermoplastic resin and easy to transform into any shape under more than 60℃, because the melting point of this product is lower than other plastics. In addition, PLACCEL H1P is ecological plastic because of its biodegradability. PLACCEL H1P can be processed by extrusion or injection molding machines into polymeric films, polymeric sheets, fibers and so on. view less | |
BASONAT® HW 1000 | BASF Dispersions & Resins | BASONAT HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1000 is recommended for app...view more BASONAT HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1000 is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | |
Drobond™ 551 | D.R. Coats Ink & Resins Pvt. Ltd. | Drobond™ 551 is a Reddish yellow mobile liquid readily decomposed by water to form polymeric titanium compounds. It is supplied as a solution in isopropyl alcohol. | |
Solplus™ D565 | Lubrizol Advanced Materials, Inc. | Solplus™ D565 is a 50% active polymeric dispersant supplied in Methoxy Propyl Acetate used for the dispersion of inorganic pigments and fillers into Unsaturated Polyester systems. | |
NUOSPERSE® FX 504 | Elementis | NUOSPERSE® FX 504 is a low-foaming, polymeric waterborne pigment dispersing agent that works effectively for many hydrophilic pigments and extenders that are used in aqueous coatings. | Request Sample |
INFILM 939 | Imerys Performance Additives | INFILM 939 has been designed and manufactured to a specific particle size distribution for use in a variety of polymeric thin film applications and contributes significantly to antiblocking. | |
FB 200 | Eagle Specialty Products | FB 200 is an organic, VOC-free, silicone-free, polymeric defoamer in a translucent liquid form. This product is most commonly used in aqueous coating system manufacturing applications. | |
INDRACOL-PC80 | SCHÜTZEN Chemical Group | INDRACOL-PC80 is an effective rheological additive for water-based paints. It is a high molecular weight polysaccharide, with a branched chain polymeric group based on xylose & galacto xylose. | |
Luna-sperse 516 | DKSH | Luna-sperse 516 is a 100% active polymeric material which offers improved pigment dispersion and stability in powder coatings. This product is available in Europe, Asia and North America. | Request Sample |
Lansperse SL1538 | P.A.T. Products | Lansperse SL1538 is a novel high molecular weight polymeric dispersing agent for solvent-based systmes. Lansperse SL1538 is highly recommended for use in Red, Blue, and White pigmented systems. | Request Sample |
ZOLDINE XL-29SE CROSSLINKER | Univar Solutions | ZOLDINE XL-29SE CROSSLINKER is a polymeric carbodiimide crosslinking agent for two- component waterborne carboxyfunctional leather finishes. These coatings are typically based upon polyurethane dispersions (PUDs) and/or polyacrylics. | Request Sample |
Ymer™ N120 | Perstorp | Ymer™ N120 is a polymeric, nonionic dispersing monomer chemical intermediate. This product is a white amorphous material used in waterborne resins systems, polyurethane dispersions, hydrophilic PU-systems, and surfactants. | |
Solsperse™ W320 | Lubrizol Advanced Materials, Inc. | Solsperse™ W320 is a 40% active APE-free polymeric dispersant in water, which will improve dispersion and stability of transparent inorganic pigments and titanium dioxides in aqueous coatings and colorants. | |
NUOSPERSE® FX 365 | Elementis | NUOSPERSE® FX 365 is a nonionic polymeric wetting and dispersing agent for use in waterborne coating and ink formulations and pigment pastes. This product shows outstanding pigment wetting and stabilizing properties. | Request Sample |
TEGO® Dispers 691 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 691 is a highly efficient polymeric wetting and dispersing additive for solventborne formulations. It gives outstanding wetting and stabilization to both organic and inorganic pigments in solventborne printing inks. | Request Sample |
BASONAT® HW 1180 PC | BASF Dispersions & Resins | BASONAT HW 1180 PC is a water-emulsificable, solvent-free, aliphatic polyisocyanate for crosslinking polymeric dispersions. It is an approximately 80% solids solution in propylene carbonate. BASONAT HW 1180 PC is used as a crosslinker for polymeric disper...view more BASONAT HW 1180 PC is a water-emulsificable, solvent-free, aliphatic polyisocyanate for crosslinking polymeric dispersions. It is an approximately 80% solids solution in propylene carbonate. BASONAT HW 1180 PC is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1180 PC is recommended for applications such as interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications and interior/exterior automotive OEM or refinish applications. view less | |
Solsperse™ 74000 | Lubrizol Advanced Materials, Inc. | Solsperse™ 74000 is a 100% active polymeric dispersant which will improve pigment dispersion and stability in UV cured flexographic and offset inks. The product is also suitable for UV cured digital inks | |
NUOSPERSE® FX 505 | Elementis | NUOSPERSE® FX 505 is a low foaming polymeric pigment dispersing agent that work effectively for various hydrophilic pigments and extenders, used in aqueous coatings. This product contains 50 % active matter in water. | Request Sample |
UNILENE B-120 | Univar Solutions | UNILENE B-120 is low molecular weight, thermoplastic aromatic C9 hydrocarbon resin, pastillated in a pearl-like shape and presented in soft yellow colored scale. Compatible with most solvents and polymeric materials. | Request Sample |
Zephrym™ PD 4974 Iron Oxide Pigment Dispersant | Croda Coatings & Polymers | Zephrym™ PD 4974 Iron Oxide Pigment Dispersant is a low VOC polymeric dispersant specifically designed for iron oxide pigments. It dramatically improves stability, enhances color development and reduces the need for thickeners. | |
Marzon™ X-55 | Laurel Products, LLC | Marzon™ X-55 is a fluoropolymer with high particle density that is created through a thermal particle polishing process. This product is designed for polymeric compound additives, coatings, and friction/wear reducing additives. | |
Marzon™ X-56 | Laurel Products, LLC | Marzon™ X-56 is a fluoropolymer with high particle density that is created through a thermal particle polishing process. This product is designed for polymeric compound additives, coatings, and friction/wear reducing additives. | |
PAT-ADD AF 75 | Patcham USA | PAT-ADD AF 75 is a silicone-free, polymeric de-aerator and defoamer for composite systems and gelcoats. It demonstrates highest efficiency in de-airing and excellent compatibility with a wide variety of polymers. | Request Sample |
TEGO® Dispers 671 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 671 is a polymeric wetting and dispersing additive for solventborne formulations. Provides high color strength, especially with organic pigments. Dispersions of carbon black pigments show a low viscosity and a blueish undertone. | Request Sample |
Dispersogen® PL 30 | Clariant - Coatings & Construction Chemicals | Dispersogen® PL 30 is an extremely efficient polymeric dispersing agent for waterborne in-plant tinters based on organic pigments. It is able to disperse very high pigment loads while still forming stable low viscous pigments pastes. | |
EFKA® PU 4020 | BASF Formulation Additives | EFKA® PU 4020 is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in reduced grinding time, improved gloss, prevention of flooding and floating p...view more EFKA® PU 4020 is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in reduced grinding time, improved gloss, prevention of flooding and floating problems, and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4020 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4020 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. view less | |
PAT-ADD DA 3204 | Patcham USA | PAT-ADD DA 3204 is a polymeric dispersing agent for industrial solvent-borne paints, inks and pigment concentrates. A special feature is the exceptionally long term storage stability of pigment dispersions made with PAT-ADD DA 3204. Additionally, its comp...view more PAT-ADD DA 3204 is a polymeric dispersing agent for industrial solvent-borne paints, inks and pigment concentrates. A special feature is the exceptionally long term storage stability of pigment dispersions made with PAT-ADD DA 3204. Additionally, its compatibility in a wide range of binder systems typically used for industrial and coil coating formulations increases its versatility. Main benefits are: excellent resistance to pigment flocculation, applicable for co-grinding milling as well as for single pigment concentrates, excellent high temperature stability; high cure temperatures, i.e. coil coatings, and polymeric dispersing agent. view less | Request Sample |
PICCOLASTIC D-125 | Univar Solutions | PICCOLASTIC D-125 is a high molecular weight, light colored, polar, thermoplastic hydrocarbon resin derived from pure styrene monomer. It exhibits to a limited degree, properties normally associated with higher polymeric resins - i.e., toughness and resil...view more PICCOLASTIC D-125 is a high molecular weight, light colored, polar, thermoplastic hydrocarbon resin derived from pure styrene monomer. It exhibits to a limited degree, properties normally associated with higher polymeric resins - i.e., toughness and resiliency. view less | Request Sample |
Lansperse SL1527 | P.A.T. Products | Lansperse SL1527 is a high molecular weight polymeric dispersing agent that finds application in a wide variety of solvent-based pigmented systems. Lansperse SL1527 is particularly effective as a dispersing agent for use in black pigmented systems. | Request Sample |
B-Cat 0067 | FTC Korea Co.,Ltd | B-Cat 0067 has excellent solubility characteristics and is useful with polymeric melamines and phenolic resins. It has good water resistance. It is suitable for use in coil and can coatings, paper coatings, and general industrial coatings. | Request Sample |
DOWSIL™ 71 Additive | Univar Solutions | DOWSIL™ 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. | Request Sample |
DOWSIL™ 71 Additive | Dow Performance Silicones | DOWSIL™ 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. | |
UNILENE® A80 | Braskem S.A. | UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric...view more UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. view less | |
UNILENE® A90 | Braskem S.A. | UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric...view more UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. view less | |
UNILENE® A100 | Braskem S.A. | UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric...view more UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. view less | |
UNILENE® B100 | Braskem S.A. | UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric...view more UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. view less | |
UNILENE® B110 | Braskem S.A. | UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric...view more UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. view less | |
UNILENE® B120 | Braskem S.A. | UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric...view more UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. view less | |
UNILENE® BS130 | Braskem S.A. | UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric...view more UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. view less | |
UNILENE® BS140 | Braskem S.A. | UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric...view more UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. view less | |
ADDITOL® E 04707 | Allnex | ADDITOL® E 04707 is a semi-crystalline polyester resin to be used as additive acting as polymeric flexibilizer for formulations based on superdurable polyurethanes. ADDITOL® E 04707 provides a higher degree of flexibility and mechanical resistance of coat...view more ADDITOL® E 04707 is a semi-crystalline polyester resin to be used as additive acting as polymeric flexibilizer for formulations based on superdurable polyurethanes. ADDITOL® E 04707 provides a higher degree of flexibility and mechanical resistance of coatings. view less | Request Sample |
SYNTEVEN 454 | DKSH | SYNTEVEN 454 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 454 is used as full binder for highly filled knifing fillers for metal, wood and mineral substra...view more SYNTEVEN 454 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 454 is used as full binder for highly filled knifing fillers for metal, wood and mineral substrates. view less | Request Sample |
SYNTEVEN 474 | DKSH | SYNTEVEN 474 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 474 is used as full binder for highly filled knifing fillers for metal, wood and mineral substra...view more SYNTEVEN 474 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 474 is used as full binder for highly filled knifing fillers for metal, wood and mineral substrates. view less | Request Sample |
ADDAPT® BioWet™ PC | ADDAPT Chemicals BV | ADDAPT® BioWet™ PC is a proprietary polymeric coalescent emulsified in water. It is used as a processing aid to improve the film forming properties in waterborne coatings. This product is non-VOC, improves wet scrub resistance, and lowers MFFT. | |
EFKA® PU 4010 | BASF Formulation Additives | EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, impr...view more EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, improved gloss, prevention of flooding and floating problems and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4010 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4010 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. view less | |
AFCONA - 4200 | AFCONA Additives Sdn Bhd | AFCONA – 4200 is a modified polyurethane polymer functioning as a high molecular weight polymeric dispersant for the deflocculation of pigments. This is compatible in solvent-based systems, and finds application in high solid coatings such as polyurethane...view more AFCONA – 4200 is a modified polyurethane polymer functioning as a high molecular weight polymeric dispersant for the deflocculation of pigments. This is compatible in solvent-based systems, and finds application in high solid coatings such as polyurethane and ultraviolet coatings. view less | |
VISIOMER® C18 PEG 1105 MA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® C18 PEG 1105 MA W is a polar methacrylate monomer in water and GMAA. It consist of a hydrophylic backbone with side chains that end in a hydrophobic group . Ideal for use as associative polymeric thickener in emulsion polymers. | |
PAT-ADD AF 76 | Patcham USA | PAT-ADD AF 76 is a silicone-free, polymeric de-aerator and defoamer for composite systems and gelcoats. It demonstrates fast de-airing and excellent compatibility with a wide variety of polymers. This product is especially recommended for clear, transpare...view more PAT-ADD AF 76 is a silicone-free, polymeric de-aerator and defoamer for composite systems and gelcoats. It demonstrates fast de-airing and excellent compatibility with a wide variety of polymers. This product is especially recommended for clear, transparent systems. view less | Request Sample |
BASONAT® HW 2000 | BASF Dispersions & Resins | BASONAT HW 2000 is a solvent-free, water-emulsifiable, polyfunctional isocyanate used as a hardener for polymeric dispersions containing reactive OH groups. It has excellent weather and chemical resistance, is non-yellowing and offers excellent hardness/f...view more BASONAT HW 2000 is a solvent-free, water-emulsifiable, polyfunctional isocyanate used as a hardener for polymeric dispersions containing reactive OH groups. It has excellent weather and chemical resistance, is non-yellowing and offers excellent hardness/flexibility for demanding applications. view less | |
TEGO® Dispers 672 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 672 is a polymeric wetting and dispersing additive for solvent-borne formulations. Provides high color strength, especially with organic pigments. Dispersions of carbon black pigments with show a low viscosity and a blueish undertone. Free o...view more TEGO® Dispers 672 is a polymeric wetting and dispersing additive for solvent-borne formulations. Provides high color strength, especially with organic pigments. Dispersions of carbon black pigments with show a low viscosity and a blueish undertone. Free of aromatic solvents. view less | Request Sample |
BYK®-399 | BYK | BYK®-399 is a polymeric leveling additive that is silicone-free. This is suitable for all gloss levels with no negative impact on gloss or haze. This product has excellent flow and leveling properties and a slight reduction of liquid surface tension. | Request Sample |
TAFIGEL® AP 20 | Munzing Chemie | TAFIGEL® AP 20 is a liquid white, turbid polymeric thickener that is an acrylic copolymer, emulsified in white oil and is anionic. It is a thickener for anionic and nonionic systems and is commonly used in construction adhesives, paints and silicate facad...view more TAFIGEL® AP 20 is a liquid white, turbid polymeric thickener that is an acrylic copolymer, emulsified in white oil and is anionic. It is a thickener for anionic and nonionic systems and is commonly used in construction adhesives, paints and silicate facade paints. view less | |
EFKA® PL 5381 | BASF Formulation Additives | EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of polymeric...view more EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of polymeric plasticizers. view less | |
AFCONA - 4202 | AFCONA Additives Sdn Bhd | AFCONA – 4202 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. AFCONA – 4202 provides viscosity reduction and pigment stability, finding application in high solid coating...view more AFCONA – 4202 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. AFCONA – 4202 provides viscosity reduction and pigment stability, finding application in high solid coatings such as polyurethane, epoxy, and ultraviolet coatings. view less | |
PAT-ADD DA 2250 | Patcham USA | PAT-ADD DA 2250 is a polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2250 contributes to optimization of the fillers, the dispersion process and product s...view more PAT-ADD DA 2250 is a polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2250 contributes to optimization of the fillers, the dispersion process and product stability. view less | Request Sample |
PAT-ADD DA 2257 | Patcham USA | PAT-ADD DA 2257 is a solution of polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2257 contributes to optimization of the filler dispersion process and sta...view more PAT-ADD DA 2257 is a solution of polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2257 contributes to optimization of the filler dispersion process and stability. view less | Request Sample |
Zephrym™ PD 3315 | Croda Coatings & Polymers | Zephrym™ PD 3315 is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It is capable of wi...view more Zephrym™ PD 3315 is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It is capable of withstanding high ion concentrations. view less | |
Marzon™ #5 | Laurel Products, LLC | Marzon™ #5 is a granular-based PTFE powder additive that exhibits a very narrow spread about the mean. This product possesses an average particle size of 5 microns and is often used in polymeric compound additives, friction/wear reducing additive, and coa...view more Marzon™ #5 is a granular-based PTFE powder additive that exhibits a very narrow spread about the mean. This product possesses an average particle size of 5 microns and is often used in polymeric compound additives, friction/wear reducing additive, and coatings. view less | |
AFCONA - 4017 | AFCONA Additives Sdn Bhd | AFCONA – 4017 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, alkylbenzene, sec-butanol, and diisobutylketone solution. AFCONA – 4017 is a high molecular weight polymeric dispersant for co-grinding coil and can coatings, and ...view more AFCONA – 4017 is a modified polyurethane polymer in a butylacetate, methoxy propyl acetate, alkylbenzene, sec-butanol, and diisobutylketone solution. AFCONA – 4017 is a high molecular weight polymeric dispersant for co-grinding coil and can coatings, and in baking polyesters, acrylics, epoxies, and polyurethanes. view less | |
Ultraflon™ MP-10 | Laurel Products, LLC | Ultraflon™ MP-10 is a thermally treated, granular-based PTFE powder additive that exhibits thermal stability. This product has an average particle size of 10 microns and is typically applied in products such as friction/wear reducing additives, coatings, and polymeric...view more Ultraflon™ MP-10 is a thermally treated, granular-based PTFE powder additive that exhibits thermal stability. This product has an average particle size of 10 microns and is typically applied in products such as friction/wear reducing additives, coatings, and polymeric compound additives. view less | |
Speedcure 7040 | Sartomer Americas | SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable f...view more SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations. view less | |
PAPI 23 | Univar Solutions | PAPI 23 is a light brown, low viscosity polymeric Methylene Diphenyl Diisocyanate (MDI) containing high quantities of Monomeric Methylene Diphenyl Diisocyanate (MMDI) isomers with an average functionality of 2.2-2.3. It may be used to produce viscoelastic...view more PAPI 23 is a light brown, low viscosity polymeric Methylene Diphenyl Diisocyanate (MDI) containing high quantities of Monomeric Methylene Diphenyl Diisocyanate (MMDI) isomers with an average functionality of 2.2-2.3. It may be used to produce viscoelastic (VE) and high resiliency (HR) foams. view less | Request Sample |
Lansperse UV20Y | P.A.T. Products | Lansperse UV20Y is a high molecular weight polymeric dispersing agent for UV and LED cured coating formulations. This product is particularly effective in yellows and must also be used in combination with our synergist Lansperse SYN1. Lansperse UV20Y is a...view more Lansperse UV20Y is a high molecular weight polymeric dispersing agent for UV and LED cured coating formulations. This product is particularly effective in yellows and must also be used in combination with our synergist Lansperse SYN1. Lansperse UV20Y is a solid 100% active version. view less | Request Sample |
TEGO® Dispers 675 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 675 is a wetting and dispersing additive for solventborne coatings. It is a polymeric additive especially for coil coating formulations. It combines outstanding image of clarity (doi) and gloss with good color stregnth, flocculation stabilit...view more TEGO® Dispers 675 is a wetting and dispersing additive for solventborne coatings. It is a polymeric additive especially for coil coating formulations. It combines outstanding image of clarity (doi) and gloss with good color stregnth, flocculation stability and good effectivity against flooding and floating. view less | Request Sample |
Ultraflon™ MP-30 | Laurel Products, LLC | Ultraflon™ MP-30 is a granular-based PTFE powder additive with an average particle size of 5 microns, providing a narrow spread, consistency and uniformity in performance. This product is typically applied in products such as polymeric compound additives,...view more Ultraflon™ MP-30 is a granular-based PTFE powder additive with an average particle size of 5 microns, providing a narrow spread, consistency and uniformity in performance. This product is typically applied in products such as polymeric compound additives, friction/wear reducing additives, and coatings. view less | |
Ultramoll® III | Rhein Chemie Rheinau GmbH | Ultramoll® III is an adipic acid polyester appearing as a clear, highly viscous liquid. This polymeric plasticizer provides short drying time and flexibility to hot-melt adhesives, and is used in oil-resistant protective clothing for industrial use such a...view more Ultramoll® III is an adipic acid polyester appearing as a clear, highly viscous liquid. This polymeric plasticizer provides short drying time and flexibility to hot-melt adhesives, and is used in oil-resistant protective clothing for industrial use such as oil and petrol-resistant tarpaulins. view less |