| SETALUX® 10-1387 | Allnex | SETALUX® 10-1387 is a non-aqueous dispersion of highly cross-linked acrylic polymeric particles. | Request Sample |
| Solsperse™ 85000 | Lubrizol Advanced Materials, Inc. | Solsperse™ 85000 is a 100% active polymeric dispersant primarily recommended for the dispersion and stability of TiO2 and other inorganic particles in UV curable inks & coatings. It is also suitable for TiO2/inorganic pigment dispersions across a wide ran...view more Solsperse™ 85000 is a 100% active polymeric dispersant primarily recommended for the dispersion and stability of TiO2 and other inorganic particles in UV curable inks & coatings. It is also suitable for TiO2/inorganic pigment dispersions across a wide range of medium-high polarity solvents. view less | |
| Suga®Sperse 60P | Colonial Chemical, Inc. | Suga®Sperse 60P is a naturally-based nonionic polymeric pigment dispersant that aids in wetting and dispersion of pigments in aqueous coatings or pigment concentrates. It is derived from alkyl glucoside chemistries and offers formulators more sustainable ...view more Suga®Sperse 60P is a naturally-based nonionic polymeric pigment dispersant that aids in wetting and dispersion of pigments in aqueous coatings or pigment concentrates. It is derived from alkyl glucoside chemistries and offers formulators more sustainable advantages than typical surfactants. Suga®Sperse 60P stabilizes pigment particles and offers good wetting for lower surface tension than that of the pigment. view less | Request Sample |
| Suga®Sperse 90P | Colonial Chemical, Inc. | Suga®Sperse 90P is a naturally-based nonionic polymeric pigment dispersant that aids in wetting and dispersion of pigments in aqueous coatings or pigment concentrates. It is derived from alkyl glucoside chemistries and offers formulators more sustainable ...view more Suga®Sperse 90P is a naturally-based nonionic polymeric pigment dispersant that aids in wetting and dispersion of pigments in aqueous coatings or pigment concentrates. It is derived from alkyl glucoside chemistries and offers formulators more sustainable advantages than typical surfactants. Suga®Sperse 60P stabilizes pigment particles and offers good wetting for lower surface tension than that of the pigment. view less | Request Sample |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...view more H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. view less | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...view more H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. view less | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...view more H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. view less | |
| Zephrym™ PD 2246 | Croda Coatings & Polymers | Zephrym™ PD 2246 is a solid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improve...view more Zephrym™ PD 2246 is a solid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improved dispersion of particles in low polarity non-aqueous systems. It is well suited for both organic and inorganic pigments and fillers, as well as carbon black. This product has very good high temperature and high shear stability. view less | |
| Zephrym™ PD 2206 | Croda Coatings & Polymers | Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced di...view more Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced dispersion of particles in low polarity solvent and resin systems. This product is well suited for both organic and inorganic pigments and fillers, as well as carbon black. It is FDA indirect food contact approved and provides excellent performance in liquid color for plastics. view less | |
| ZetaSperse® 182 Dispersant | Evonik Operations GmbH, BL Coating Additives | ZetaSperse® 182 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 182 dispersant provides performance benefits in the aqueous dispersion of organic, c...view more ZetaSperse® 182 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 182 dispersant provides performance benefits in the aqueous dispersion of organic, carbon black, and inorganic pigments as well as fillers and functional solid chemicals. Most effective when used as a secondary dispersant in conjunction with anionic polymeric dispersants and grind resins, ZetaSperse® 182 dispersant can provide significant wetting, milling, and steric stabilization benefits, often improving milling efficiency, color development, and dispersion stability, allowing formulators to achieve higher performance. view less | Request Sample |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...view more H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. view less | |
| Emulsogen® EPA 1954 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled p...view more Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled particle size and low coagulation during the polymerization process. view less | |
| TROYTHIX™ 21BA | Arxada – Troy Corporation | TROYTHIX™ 21BA is a chemically-treated polymerized oil. It works on the particle/vehicle interface where a structure based on electrical charge is set up between particles, resulting in controlled flocculation. | Request Sample |
| Marzon™ X-55 | Laurel Products, LLC | Marzon™ X-55 is a fluoropolymer with high particle density that is created through a thermal particle polishing process. This product is designed for polymeric compound additives, coatings, and friction/wear reducing additives. | |
| Marzon™ X-56 | Laurel Products, LLC | Marzon™ X-56 is a fluoropolymer with high particle density that is created through a thermal particle polishing process. This product is designed for polymeric compound additives, coatings, and friction/wear reducing additives. | |
| BURGESS NO. 50® | Burgess Pigment Company | BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...view more BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. view less | |
| INFILM 939 | Imerys Performance Additives | INFILM 939 has been designed and manufactured to a specific particle size distribution for use in a variety of polymeric thin film applications and contributes significantly to antiblocking. | |
| SLIP-AYD® SL 425 | Elementis | SLIP-AYD® SL 425 is a fine particle size waterborne/solventborne dispersion of hard polymeric wax in xylene solvent and polymeric plastisizer. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in wide ra...view more SLIP-AYD® SL 425 is a fine particle size waterborne/solventborne dispersion of hard polymeric wax in xylene solvent and polymeric plastisizer. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in wide range solvent based applications. It may be used in high gloss systems with very little effect on gloss. view less | Request Sample |
| Marzon™ 110 | Laurel Products, LLC | Marzon™ 110 is a premium, loosely agglomerated PTFE additive offering a uniquely spherical primary particle morphology. This product is designed to be friable, which means it can break down to its primary particle size under low shear. It is commonly applied in coatings, polymeric...view more Marzon™ 110 is a premium, loosely agglomerated PTFE additive offering a uniquely spherical primary particle morphology. This product is designed to be friable, which means it can break down to its primary particle size under low shear. It is commonly applied in coatings, polymeric compound additives, and friction/wear reducing additives. view less | |
| DAIPLACOAT RHC-731 CLEAR | GSI Exim America, Inc. | DAIPLACOAT RHC-731 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 5～8µm. It has excellent heat-resistance, solvent-resista...view more DAIPLACOAT RHC-731 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 5～8µm. It has excellent heat-resistance, solvent-resistance, and scratch resistance. It is possible to be dispersed by mixers and agitators because of its easy dispersibility. Furthermore, this product has narrow width of particle size distribution and sharp design. view less | |
| DAIPLACOAT RHC-530 CLEAR | GSI Exim America, Inc. | DAIPLACOAT RHC-530 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 12～17µm. It has excellent heat-resistance, solvent-resis...view more DAIPLACOAT RHC-530 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 12～17µm. It has excellent heat-resistance, solvent-resistance, and scratch resistance. It is possible to be dispersed by mixers and agitators because of its easy dispersibility. Furthermore, this product has narrow width of particle size distribution and sharp design. view less | |
| Marzon™ #5 | Laurel Products, LLC | Marzon™ #5 is a granular-based PTFE powder additive that exhibits a very narrow spread about the mean. This product possesses an average particle size of 5 microns and is often used in polymeric compound additives, friction/wear reducing additive, and coa...view more Marzon™ #5 is a granular-based PTFE powder additive that exhibits a very narrow spread about the mean. This product possesses an average particle size of 5 microns and is often used in polymeric compound additives, friction/wear reducing additive, and coatings. view less | |
| Ultraflon™ MP-10 | Laurel Products, LLC | Ultraflon™ MP-10 is a thermally treated, granular-based PTFE powder additive that exhibits thermal stability. This product has an average particle size of 10 microns and is typically applied in products such as friction/wear reducing additives, coatings, and polymeric...view more Ultraflon™ MP-10 is a thermally treated, granular-based PTFE powder additive that exhibits thermal stability. This product has an average particle size of 10 microns and is typically applied in products such as friction/wear reducing additives, coatings, and polymeric compound additives. view less | |
| Ultraflon™ MP-30 | Laurel Products, LLC | Ultraflon™ MP-30 is a granular-based PTFE powder additive with an average particle size of 5 microns, providing a narrow spread, consistency and uniformity in performance. This product is typically applied in products such as polymeric compound additives,...view more Ultraflon™ MP-30 is a granular-based PTFE powder additive with an average particle size of 5 microns, providing a narrow spread, consistency and uniformity in performance. This product is typically applied in products such as polymeric compound additives, friction/wear reducing additives, and coatings. view less | |
| E-SPERSE® 701 | Ethox Chemicals | E-SPERSE® 701 is a anionic surfactant for emulsion polymerization. Ethox E-Sperse® 701 and 702 anionic polymerization surfactants in combination with nonionic emulsifiers produce low particle size dispersions with low coagulum levels and excellent mechani...view more E-SPERSE® 701 is a anionic surfactant for emulsion polymerization. Ethox E-Sperse® 701 and 702 anionic polymerization surfactants in combination with nonionic emulsifiers produce low particle size dispersions with low coagulum levels and excellent mechanical and electrolyte st ability. The use of anionic E-Sperse® 702 along with the nonionic E-Sperse® 700 produced the best combination of properties, better than non-DSP-based emulsifiers in the latex formulations below. view less | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric...view more Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. view less | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric...view more Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. view less | |
| Thixo-Carb® 500 | Specialty Minerals | Thixo-Carb® 500 is a surface coated, ultra-fine precipitated calcium carbonate which has a uniform particle size. This product has a surface area of 9.8 m2/grams and specific gravity 2.7. Thixo-Carb® 500 is used in epoxy and butyl polymeric sealant system...view more Thixo-Carb® 500 is a surface coated, ultra-fine precipitated calcium carbonate which has a uniform particle size. This product has a surface area of 9.8 m2/grams and specific gravity 2.7. Thixo-Carb® 500 is used in epoxy and butyl polymeric sealant systems. view less | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric...view more Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. view less | |
| E-SPERSE® 700 | Ethox Chemicals | E-SPERSE® 700 is a yellow liquid for emulsion polymerization. The nonionic surfactants, E-Sperse® 700 and 703, vary in their ethoxylation level and thus their hydrophile-lipophile balance or HLB. Matching the HLB of the emulsifier to the monomers and to t...view more E-SPERSE® 700 is a yellow liquid for emulsion polymerization. The nonionic surfactants, E-Sperse® 700 and 703, vary in their ethoxylation level and thus their hydrophile-lipophile balance or HLB. Matching the HLB of the emulsifier to the monomers and to the polymer is critical for optimal emulsion properties. The choice of the proper one for your emulsion polymer system can best be determined by experimentation. E-Sperse® 700 and 703 nonionic polymerization surfactants may also be used in conjunction with other commonly utilized nonionic or anionic surfactants to produce smaller particle size emulsions. The E-Sperse® series emulsifiers are much lower foaming than traditional alkylphenol ethoxylates so lower levels of defoamers are necessary in the polymerization process. view less | |
| SLIP-AYD® SL 404 | Elementis | SLIP-AYD® SL 404 is a fine particle size solventborne dispersion of hard polymeric wax in 2-Butoxyethanol solvent. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent...view more SLIP-AYD® SL 404 is a fine particle size solventborne dispersion of hard polymeric wax in 2-Butoxyethanol solvent. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent based applications. It may be used in high gloss systems with very little effect on gloss. view less | Request Sample |
| Maxemul™ 8201 | Croda Coatings & Polymers | Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has impro...view more Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. view less | |
| BYK®-SYNERGIST 2100 | BYK | BYK®-SYNERGIST 2100 is an insoluble pigment complex. This product is an additive in powder form. It produces in combination with polymeric wetting and dispersing additives small particle sizes by deflocculation of pigments and thus: increase gloss, improv...view more BYK®-SYNERGIST 2100 is an insoluble pigment complex. This product is an additive in powder form. It produces in combination with polymeric wetting and dispersing additives small particle sizes by deflocculation of pigments and thus: increase gloss, improve color strength, reduce viscosity of the pigment concentrate, depending on pigment type and treatment of the pigment surface. This way, higher pigment content in the pigment concentrate is possible. view less | Request Sample |
| Microsil 325 | Tolsa SA | Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be used in synthetic marble and polymeric...view more Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. view less | |
| SLIP-AYD® SL 523 | Elementis | SLIP-AYD® SL 523 is a fine particle size dispersion of hard polymeric wax in isoproponal solvent. SLIP-AYD® SL 523 provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent ba...view more SLIP-AYD® SL 523 is a fine particle size dispersion of hard polymeric wax in isoproponal solvent. SLIP-AYD® SL 523 provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent based applications. It may be used in high gloss systems with very little effect on gloss. view less | Request Sample |
| T-Mulz® A 136 PE-KS | Harcros Chemicals, Inc. | T-Mulz® A 136 PE-KS is a 50% active, potassium neutralized, APE free, anionic surfactant primarily used for acrylic, styrene/acrylic and vinyl/acrylic latexes in emulsion polymerization. It can be used as a primary surfactant, or post-added to improve glo...view more T-Mulz® A 136 PE-KS is a 50% active, potassium neutralized, APE free, anionic surfactant primarily used for acrylic, styrene/acrylic and vinyl/acrylic latexes in emulsion polymerization. It can be used as a primary surfactant, or post-added to improve gloss retention. T-Mulz® A 136PE KS also provides particle size control, corrosion inhibition and improved adhesion. view less | |
| E-SPERSE® 703 | Ethox Chemicals | E-SPERSE® 703 is a nonionic surfactant with excellent chemical stability. The nonionic surfactants, E-Sperse® 700 and 703, vary in their ethoxylation level and thus their hydrophile-lipophile balance or HLB. Matching the HLB of the emulsifier to the monom...view more E-SPERSE® 703 is a nonionic surfactant with excellent chemical stability. The nonionic surfactants, E-Sperse® 700 and 703, vary in their ethoxylation level and thus their hydrophile-lipophile balance or HLB. Matching the HLB of the emulsifier to the monomers and to the polymer is critical for optimal emulsion properties. The choice of the proper one for your emulsion polymer system can best be determined by experimentation. E-Sperse® 700 and 703 nonionic polymerization surfactants may also be used in conjunction with other commonly utilized nonionic or anionic surfactants to produce smaller particle size emulsions. The E-Sperse® series emulsifiers are much lower foaming than traditional alkylphenol ethoxylates so lower levels of defoamers are necessary in the polymerization process. view less | |
| Microsil 325S | Tolsa SA | Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in applications where a lower viscosity or smaller absorption is required. It can be used in synthetic marble and polymeric...view more Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in applications where a lower viscosity or smaller absorption is required. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. view less | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...view more Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. view less | |
| Dynoadd® D-960 | Dynoadd by Dynea | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...view more Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. view less | Request Sample |
| E-SPERSE® 702 | Ethox Chemicals | E-SPERSE® 702 is a anionic surfactant with excellent mechanical stability and low coagulum in all arylic and styrene/acrylic formulations. Ethox E-Sperse® 701 and 702 anionic polymerization surfactants in combination with nonionic emulsifiers produce low ...view more E-SPERSE® 702 is a anionic surfactant with excellent mechanical stability and low coagulum in all arylic and styrene/acrylic formulations. Ethox E-Sperse® 701 and 702 anionic polymerization surfactants in combination with nonionic emulsifiers produce low particle size dispersions with low coagulum levels and excellent mechanical and electrolyte st ability. The use of anionic E-Sperse® 702 along with the nonionic E-Sperse® 700 produced the best combination of properties, better than non-DSP-based emulsifiers in the latex formulations below. view less | |
| Pluriol® A 700 VP | BASF Formulation Technologies | Pluriol® A 700 VP provides plasticizing functionality within the field of emulsion polymerization. Compatible with ethynically-unsaturated monomers, this readily-biodegradable comonomer efficiently reduces MFFT (minimum film formation temperatures) in for...view more Pluriol® A 700 VP provides plasticizing functionality within the field of emulsion polymerization. Compatible with ethynically-unsaturated monomers, this readily-biodegradable comonomer efficiently reduces MFFT (minimum film formation temperatures) in formulations, decreasing the need for coalescing agents without contributing to VOC content. The low Tg monomer (-70 C) is also capable of reducing viscosity of high-solids latex formulations while maintaining expected particle sizes. These distinctive performance factors make Pluriol A 700 VP a multifaceted tool for use in your next generation of EP formulating. view less | |
| Lupasol® | BASF Formulation Technologies | Lupasol® Polyethylenimine (PEI) polymers have a branched cationic structure with high charge density that enables improved adhesion of dissimilar materials. Lupasol® can be used as a formulation additive or primer coat for: adhesion promotion, pigment sta...view more Lupasol® Polyethylenimine (PEI) polymers have a branched cationic structure with high charge density that enables improved adhesion of dissimilar materials. Lupasol® can be used as a formulation additive or primer coat for: adhesion promotion, pigment stabilization, and increased particle cohesion. Obtained from the polymerization of ethylenimine, this line of polymers is available in a wide range of molecular weights (from 800 -106 g/mol). Lupasol® products are water soluble and also exhibit good solubility in polar solvents with the added benefit of having a strong eco-toxicological profile including several food contact compliances. view less | |
| Dynoadd® D-963 | Dynoadd by Dynea | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...view more Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. view less | Request Sample |
| ECOPOLTEXT-D | Ecopol Tech | ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high concentration of polymer, and very low viscosity. This gives a very good performance for digital printing. The product is free of NMP, NEP, and VOCs and organo-TIN free. Due to its unique polymeric...view more ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high concentration of polymer, and very low viscosity. This gives a very good performance for digital printing. The product is free of NMP, NEP, and VOCs and organo-TIN free. Due to its unique polymeric structure, ECOPOLTEXT-D is particularly suitable for applications involving different substrates. As with any product, ECOPOLTEXT-D should be tested or formulated for a specific use before an extensive application. Resin dispersions, emulsifiers, and thickening agents, among others, can be added. view less |
