| Bayhydur® XP 2487/1 | Covestro | Bayhydur® XP 2487/1 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. | |
| TIB KAT® 214 | TIB Chemicals | TIB KAT® 214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. It has higher hydrolytic stability than comparable organotin carboxylates. The catalytica...view more TIB KAT® 214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. It has higher hydrolytic stability than comparable organotin carboxylates. The catalytical reactivity of this product in polyurethane systems is in most cases higher than DBTL (TIB KAT® 218), resulting in shorter pot life and quicker curing times. The use in water-based systems is possible within certain limits. view less | |
| Desmophen® NH 1521 | Covestro | Desmophen® NH 1521 resin is an amine-functional reactive partner for polyisocyanates, supplied with 10% n-butyl acetate. Desmophen® NH 1521 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® NH 1521 resin may be used by itself or as a blend with hydroxyfunctional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane...view more Desmophen® NH 1521 resin is an amine-functional reactive partner for polyisocyanates, supplied with 10% n-butyl acetate. Desmophen® NH 1521 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® NH 1521 resin may be used by itself or as a blend with hydroxyfunctional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/ urea clearcoats. view less | |
| AFCONA - 3250 | AFCONA Additives Sdn Bhd | AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3250 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane...view more AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3250 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane, ultraviolet coatings, and printing inks. view less | |
| AFCONA - 3251 | AFCONA Additives Sdn Bhd | AFCONA – 3251 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, improves leveling performance, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3251 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane...view more AFCONA – 3251 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, improves leveling performance, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3251 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane, and ultraviolet coatings. view less | |
| JONCRYL® 922 | BASF Dispersions & Resins | JONCRYL 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coat...view more JONCRYL 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times and a practical pot life. High solids coatings for maintenance, transportation, and other applications can be formulated from 2.3 to 3.8 pounds per gallon of VOC. JONCRYL 922 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product is also available in MAK as JONCRYL 920. It should be considered as a candidate for high performance, maintenance, and transportation coatings as a replacement for conventional solids urethane finishes. view less | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| GENOMER* 4215/M22 | Rahn USA Corp. | GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic fo...view more GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC, PE etc.); PVC flooring; industrial coatings and adhesives; and plastic varnishes. view less | Request Sample |
| AB-70F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-70F is NMP free aliphatic urethane dispersion with good gloss, flow, water resistance, adhesion, tough, flexible, and is applicable in mold coatings. It is applicable for numerous different coatings such as, plastic, industrial, and more. | |
| AB-1211 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-1211, in the form of a milky liquid, is a unique blend of polyurethane acrylic resins embossable base coat for automotive leathers. It has good physical properties, good hydrolytic exposure flexibility resistance, abrasion resistance, cold crack resist...view more AB-1211, in the form of a milky liquid, is a unique blend of polyurethane acrylic resins embossable base coat for automotive leathers. It has good physical properties, good hydrolytic exposure flexibility resistance, abrasion resistance, cold crack resistance, and water resistance. view less | |
| Coapur™ 2740 | Arkema Rheology & Specialty Additives | Coapur™ 2740 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water based formulations. Coapur™ 2740 can be used sole or in combination either with other polyurethane thickeners or with any type of rheolo...view more Coapur™ 2740 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water based formulations. Coapur™ 2740 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2740 is a pure associative thickener. It is designed to interact strongly with the binder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2740 helps to match the highest coating quality possible for water-based formulations. view less | Request Sample |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...view more Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. view less | |
| ADDITOL® VXW 6360 | Allnex | ADDITOL® VXW 6360 is a polyurethane thickener for air-drying, aqueous coating systems. It has excellent rheologic properties, resulting in improved flow and leveling, film-build and brushability. | Request Sample |
| GENOMER* 4215 | Rahn USA Corp. | GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PV...view more GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PVC flooring; adhesives; and plastic varnishes. view less | Request Sample |
| Carbamac® 234-1168 | Polynt Composites | Carbamac® 234-1168 is recommended for general purpose urethane varnishes and enamels. Systems that offer good flexibility, adhesion and high gloss can be formulated using this resin. Manufactured in North America. All components of this product are listed...view more Carbamac® 234-1168 is recommended for general purpose urethane varnishes and enamels. Systems that offer good flexibility, adhesion and high gloss can be formulated using this resin. Manufactured in North America. All components of this product are listed on the DSL. view less | |
| RESYDROL® AZ 6608w/43WA | Allnex | Resydrol® AZ 6608W/43WA is a water born, urethane modified polyester. It has extraordinary good stone chip resistance, excellent thermal yellowing stability, and good gloss. It is recommended for extremely flexible stoving enamels. | Request Sample |
| CN2921 | Sartomer Americas | CN2921 is an aliphatic urethane acrylate oligomer developed for UV curable coating and ink applications where adhesion and excellent weathering resistance are required. CN2921 adheres to plastics and polycarbonates and has good flexibility. | |
| GENOMER* 4188/EHA | Rahn USA Corp. | GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industr...view more GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. view less | Request Sample |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| GENOMER* 4337 | Rahn USA Corp. | GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overpr...view more GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overprint varnishes. view less | Request Sample |
| RESYDROL® AZ 6627w/36WA | Allnex | RESYDROL® AZ 6627w/36WA is a waterborne, urethane modified alkyd resin used in combination with watersoluble melamine resins (perferably hexamethoxy-methylmelamine grades) is recommended for low bake (e. g. 20 min / 130 °C) waterborne stoving enamels prov...view more RESYDROL® AZ 6627w/36WA is a waterborne, urethane modified alkyd resin used in combination with watersoluble melamine resins (perferably hexamethoxy-methylmelamine grades) is recommended for low bake (e. g. 20 min / 130 °C) waterborne stoving enamels providing properties. view less | Request Sample |
| RayCore 9534 | Specialty Polymers | RayCore 9534 is a polyurethane-‐acrylic core shell hybrid, designed to provide outstanding chemical, scuff, scratch and UV resistance. Also features early water and chemical resistance. It has excellent adhesion to a variety of surfaces and can be formul...view more RayCore 9534 is a polyurethane-‐acrylic core shell hybrid, designed to provide outstanding chemical, scuff, scratch and UV resistance. Also features early water and chemical resistance. It has excellent adhesion to a variety of surfaces and can be formulated at low VOC. Can be used in concrete, metal and wood applications. view less | |
| ST-844 | Quaker Color (a Division of McAdoo & Allen, Inc.) | ST-844 is a solvent free, inherently dull, soft feel aliphatic urethane dispersion. ST-844 has a unique combination between soft feel, flexibility and toughness. It can be used in conjunction with isocyanate crosslinker or as is. | |
| DAOTAN® TW 6491/33WA | Allnex | Daotan® TW 6491/33WA is a waterborne, high molecular weight, polyether- based Polyurethane dispersion, free of solvents and emulsifiers. Coatings based on Daotan TW 6491 provide quick drying and yield transparent, crack free films without further addition...view more Daotan® TW 6491/33WA is a waterborne, high molecular weight, polyether- based Polyurethane dispersion, free of solvents and emulsifiers. Coatings based on Daotan TW 6491 provide quick drying and yield transparent, crack free films without further addition of co- solvents. Outstanding features are very high elasticity and elongation. view less | Request Sample |
| Viscoat #216 | Kowa American Corporation | Viscoat #216 our High purity (98% ) Urethane acrylate for high adhesion and SLA applications with Low viscosity (26 mPa*s). Low odor & Colorless liquid with minimal difunctional impurities to prevent premature gellation. | Request Sample |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...view more L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. view less | |
| GENOMER* 4188/M22 | Rahn USA Corp. | GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives a...view more GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. view less | Request Sample |
| Fluorcolor 2200 YLW | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2200 YLW is a yellow fluorescent powder. This product is most commonly used as a coating in polyurethane based paint and it has a high solvent resistance. | |
| Fluorcolor 2200 ORM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2200 ORM is an orange fluorescent powder. This product is most commonly used as a coating in polyurethane based paint and it has a high solvent resistance. | |
| Fluorcolor 2200 RED | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2200 RED is a red fluorescent powder. This product is most commonly used as a coating in polyurethane based paint and it has a high solvent resistance. | |
| Fluorcolor 2200 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2200 MGT is a pink fluorescent powder. This product is most commonly used as a coating in polyurethane based paint and it has a high solvent resistance. | |
| Fluorcolor 2200 MMG | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2200 MMG is a magenta fluorescent powder. This product is most commonly used as a coating in polyurethane based paint and it has a high solvent resistance. | |
| Fluorcolor 2200 GRM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2200 GRM is a green fluorescent powder. This product is most commonly used as a coating in polyurethane based paint and it has a high solvent resistance. | |
| Fluorcolor 2200 VLT | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2200 VLT is a violet fluorescent powder. This product is most commonly used as a coating in polyurethane based paint and it has a high solvent resistance. | |
| Hauthane L-2882 | Hauthaway | Hauthane L-2882 is a very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. It was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2...view more Hauthane L-2882 is a very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. It was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. L-2882 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for alternative application methods. view less | |
| Nippolan 3116 | Tosoh Corporation | Nippolan 3116 is a one-component polyurethane adhesive in methyl ethyl ketone, toluene, acetone, and dimethylformamide solvents. This product is ideal for use in leather applications, including shoes. | |
| Disvacryl-1016 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1016 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in chemically resistant high-performance polyurethane coatings. | |
| DISPERBYK-194 N | BYK | DISPERBYK-194 N is a wetting and dispersing additive for aqueous systems and pigment concentrates, especially for use in aqueous two-pack polyurethane and two-pack epoxy systems. | Request Sample |
| DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 is a bubble releasing, anti-foaming agent for variety of solvent-borne coatings. Applications include alkyd enamels, PUR, epoxies, and acrylics. | Request Sample |
| 2062W | GIMEL Technical Materials | 2062W is a difunctional waterborne aliphatic urethane acrylate used in waterborne coatings. It shows excellent toughness and good adhesion to metallization with no yellowing. | Request Sample |
| 2611H | GIMEL Technical Materials | 2611H is an aliphatic urethane acrylate used in UV pressure-sensitive adhesives. It has good toughness, low TG, and excellent adhesion with no yellowing. | Request Sample |
| UROTUF® F47-M-60 | Polynt Composites | UROTUF® F47-M-60 is a one-package ASTM Type I oil modified urethane which cures by oxidation at ambient temperatures in the presence of metallic driers. It provides improved interior color retention compared to UROTUF® F77-M-60. | |
| Bayhydur® HD 2018 | Covestro | Bayhydur® HD 2018 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free, water-dispersible crosslinking agent for two-component waterborne polyurethane coatings. | |
| DAOTAN® STW 6434/40WA | Allnex | DAOTAN® STW 6434/40WA is a waterborne, polyester based aliphatic polyurethane dispersion. It is the NMP/NEP- free alternative for DAOTAN® (V)TW 6434. Due to high toughness and excellent elasticity DAOTAN® STW 6434/40WA is recommended as modifier resin for...view more DAOTAN® STW 6434/40WA is a waterborne, polyester based aliphatic polyurethane dispersion. It is the NMP/NEP- free alternative for DAOTAN® (V)TW 6434. Due to high toughness and excellent elasticity DAOTAN® STW 6434/40WA is recommended as modifier resin for waterborne OEM primer-surfacers to improve stone chipping resistance. view less | Request Sample |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...view more Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. view less | |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...view more Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. view less | |
| ProHere® U 10002 | Michelman | ProHere® U 10002 is an anionic water-based polyurethane acrylic hybrid system used in the formulation of fast drying, fast hardening, abrasion resistant top coats for metal coatings. | |
| ECOPOLTEXT-S40 V | Ecopol Tech | ECOPOLTEXT-S40 V is an anionic aliphatic polyester-polyurethane dispersion with specific cross-linking in textile drying processes. This product is suitable in areas such as sports, technical articles, and general protective equipment, as it has fabric-re...view more ECOPOLTEXT-S40 V is an anionic aliphatic polyester-polyurethane dispersion with specific cross-linking in textile drying processes. This product is suitable in areas such as sports, technical articles, and general protective equipment, as it has fabric-reactive groups that provide better adhesion. view less | |
| DAOTAN® TW 6452/30WA | Allnex | DAOTAN® TW 6452/30WA is an aqueous aliphatic polyurethane dispersion, polycarbonate based. It is recommended for waterborne plastic primer and plastic basecoats as well as auto OEM basecoats with highest requirements on optical appearance ("Flop), water r...view more DAOTAN® TW 6452/30WA is an aqueous aliphatic polyurethane dispersion, polycarbonate based. It is recommended for waterborne plastic primer and plastic basecoats as well as auto OEM basecoats with highest requirements on optical appearance ("Flop), water resistance as well as mechanical properties. view less | Request Sample |
| JONCRYL® 934 | BASF Dispersions & Resins | JONCRYL 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JON...view more JONCRYL 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JONCRYL 934 displays good cure rate and pot life. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less | |
| HEUCOSIN® Special Tomato Red G 10138 | Heubach Ltd | HEUCOSIN® Special Tomato Red G 10138 is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmet...view more HEUCOSIN® Special Tomato Red G 10138 is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a red powder that has a specific gravity of 3.4 g/cm^3, a bulk volume of 2.8 I/kg, and an oil absorption of 22 g/100g. view less | Request Sample |
| HEUCOSIN® Special Dust Grey G 10140 | Heubach Ltd | HEUCOSIN® Special Dust Grey G 10140 is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmeth...view more HEUCOSIN® Special Dust Grey G 10140 is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a grey powder that has a specific gravity of 4.1 g/cm^3, a bulk volume of 1.7 I/kg, and an oil absorption of 16 g/100g. view less | Request Sample |
| SUO-1811N | DKSH | SUO-1811N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1811N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1811N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1811N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1811N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1831N | DKSH | SUO-1831N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1831N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1831N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1831N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1831N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1841N | DKSH | SUO-1841N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1841N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1841N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1841N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1841N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1881N | DKSH | SUO-1881N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1881N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1881N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1881N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1881N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| ECOPOLEDER-S-BASE | Ecopol Tech | ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong...view more ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong, robust, and more durable bond to the leather substrate. ECOPOLEDER-BASE imparts good elasticity to the material, significantly improving its flexibility. This translates into a superior handling experience, making it the ideal choice for applications that demand strength and ease of handling. ECOPOLEDER-BASE represents a solution that incorporates a synthesis of advanced polyurethane-polyester technology to offer increased performance and versatility in leather impregnation processes. view less | |
| HEUCOSIN® Special Sand Yellow G 6514 N | Heubach Ltd | HEUCOSIN® Special Sand Yellow G 6514 N is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylm...view more HEUCOSIN® Special Sand Yellow G 6514 N is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a yellow powder that has a specific gravity of 4.0 g/cm^3, a bulk volume of 1.6 I/kg, and an oil absorption of 22 g/100g. view less | Request Sample |
| HEUCOSIN® Special-Plus Tomato Red G 10503 | Heubach Ltd | HEUCOSIN® Special-Plus Tomato Red G 10503 is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymeth...view more HEUCOSIN® Special-Plus Tomato Red G 10503 is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a red powder that has a specific gravity of 2.8 g/cm^3, a bulk volume of 2.4 I/kg, and an oil absorption of 19 g/100g. view less | Request Sample |
| HEUCOSIN® Special Silver Grey G 6555 N | Heubach Ltd | HEUCOSIN® Special Silver Grey G 6555 N is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylm...view more HEUCOSIN® Special Silver Grey G 6555 N is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a grey powder that has a specific gravity of 4.1 g/cm^3, a bulk volume of 1.6 I/kg, and an oil absorption of 17 g/100g. view less | Request Sample |
| HEUCOSIN® Special Anthracite Grey G 10120 | Heubach Ltd | HEUCOSIN® Special Anthracite Grey G 10120 is a dry coloured pigment preparation mix of inorganic/organic pigments and extenders. It is specifically used for application in EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. ...view more HEUCOSIN® Special Anthracite Grey G 10120 is a dry coloured pigment preparation mix of inorganic/organic pigments and extenders. It is specifically used for application in EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a grey powder that has a moisture content of 1.0% max., a specific gravity of 4.3 g/cm^3, a bulk volume of 1.4 I/kg, and an oil absorption of 13 g/100g. view less | Request Sample |
| HEUCOSIN® Special Stone Grey G 6517 N | Heubach Ltd | HEUCOSIN® Special Stone Grey G 6517 N is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylme...view more HEUCOSIN® Special Stone Grey G 6517 N is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a grey powder that has a specific gravity of 4.1 g/cm^3, a bulk volume of 1.4 I/kg, and an oil absorption of 19 g/100g. view less | Request Sample |
| HEUCOSIN® Special-Plus Stone Grey G 10508 | Heubach Ltd | HEUCOSIN® Special-Plus Stone Grey G 10508 is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymeth...view more HEUCOSIN® Special-Plus Stone Grey G 10508 is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a grey powder that has a specific gravity of 4.1 g/cm^3, a bulk volume of 1.4 I/kg, and an oil absorption of 17 g/100g. view less | Request Sample |
| HEUCOSIN® Special Cement Grey G 6531 N | Heubach Ltd | HEUCOSIN® Special Cement Grey G 6531 N is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylm...view more HEUCOSIN® Special Cement Grey G 6531 N is a dry coloured pigment preparation mix of inorganic and/or organic pigments and extenders for polymer floor coatings. It is specifically applied to EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a grey powder that has a specific gravity of 4.2 g/cm^3, a bulk volume of 1.6 I/kg, and an oil absorption of 16 g/100g. view less | Request Sample |
| HEUCOSIN® Special Beige G 10121 | Heubach Ltd | HEUCOSIN® Special Beige G 10121 is a yellow coloured powder pigment preparation mix of organic / inorganic pigments and extenders for polymer floor coatings. It is specifically used for application in EP water-borne, EP solvent-free, polyurethane PU, and ...view more HEUCOSIN® Special Beige G 10121 is a yellow coloured powder pigment preparation mix of organic / inorganic pigments and extenders for polymer floor coatings. It is specifically used for application in EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a grey powder that has a specific gravity of 4.0 g/cm^3, a bulk volume of 2.0 I/kg, and an oil absorption of 31 g/100g. view less | Request Sample |
| UCECOAT® 7700 | Allnex | UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented,...view more UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. view less | Request Sample |
| HEUCOSIN® Special Agate Grey G 10135 | Heubach Ltd | HEUCOSIN® Special Agate Grey G 10135 is a coloured grey powder pigment preparation of organic/inorganic pigments with extenders that is recommended for polymer floor coatings. It is specifically used for application in EP water-borne, EP solvent-free, polyurethane...view more HEUCOSIN® Special Agate Grey G 10135 is a coloured grey powder pigment preparation of organic/inorganic pigments with extenders that is recommended for polymer floor coatings. It is specifically used for application in EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product has moisture content of 1.0% max., a specific gravity of 4.0 g/cm^3, a bulk volume of 1.8 I/kg, and an oil absorption of 18 g/100g. view less | Request Sample |
| N3D-I150 | Sartomer Americas | N3D-I150 is a polyester urethane resin that provides high strength performance when used as the primary component in 3D printing resins. The structure of this high impact resin leverages specific moieties to deliver high strength, without inducing shrinka...view more N3D-I150 is a polyester urethane resin that provides high strength performance when used as the primary component in 3D printing resins. The structure of this high impact resin leverages specific moieties to deliver high strength, without inducing shrinkage typically found with high strength materials. view less | |
| MH-245 | Quaker Color (a Division of McAdoo & Allen, Inc.) | MH-245 is a high performance, low VOC aliphatic polyurethane dispersion designed for concrete coatings. MH-245 has hot tire pick up resistance when formulated as a one component coating. It can also be crosslinked with carbodiimines or isocyanate. | |
| CN929 | Sartomer Americas | CN929 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, flexibility, low viscosity, and fast cure are among the key attributes of CN929. | |
| CN9893 | Sartomer Americas | CN9893 is a difunctional aliphatic urethane oligomer that produces tough, flexible, and abrasion resistant radiation-cured films. CN9893 is resistant to yellowing and is especially recommended for plastic, textile, leather, wood and metal coatings. | |
| UCECOAT® 7630 | Allnex | UCECOAT® 7630 is an energy curable polyurethane dispersion which is tack-free after water evaporation. It has been developed for wood coatings but can also be used for other applications, such as field applied UV curable coatings for wood, concrete, VCT (...view more UCECOAT® 7630 is an energy curable polyurethane dispersion which is tack-free after water evaporation. It has been developed for wood coatings but can also be used for other applications, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. Because of its non-irritant nature and low viscosity, it can be applied safely by spray coating and curtain coating. view less | Request Sample |
| Aptalon™ W8030 | Lubrizol Advanced Materials, Inc. | Aptalon™ W8030 has a naturally low gloss that allows for the reduction or elimination of matting additives that are typically required in low gloss coatings. This resin is a water-borne, self-crosslinking, self-matting polyurethane dispersion using patent...view more Aptalon™ W8030 has a naturally low gloss that allows for the reduction or elimination of matting additives that are typically required in low gloss coatings. This resin is a water-borne, self-crosslinking, self-matting polyurethane dispersion using patented polyamide polyol technology. Aptalon W8030 provides excellent hydrolysis resistance, hardness, and chemical resistance that outperforms other water-borne polyurethane chemistries. This product is a 1K dispersion designed for high performance applications, and will meet the performance properties of many 2K solvent-borne finishes without the need for external cross-linkers. Aptalon W8030 has no intentionally added NMP, NEP, and APEO which allows for global formulation compliance. view less | |
| GENOMER* 4514 | Rahn USA Corp. | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...view more GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less | Request Sample |
| UROTUF® M21-X-40 | Polynt Composites | UROTUF® M21-X-40 is an aromatic, one-package, urethane prepolymer which cures by reaction with ambient moisture in the air to a moderately hard clear film with outstanding abrasion resistance, toughness, and flexibility. It is recommended for interior fin...view more UROTUF® M21-X-40 is an aromatic, one-package, urethane prepolymer which cures by reaction with ambient moisture in the air to a moderately hard clear film with outstanding abrasion resistance, toughness, and flexibility. It is recommended for interior finishes where outstanding color retention is not required. view less | |
| PLACCEL 410 | Daicel (U.S.A.), Inc. | PLACCEL 410 is a polycaprolactone-tetraol which has four primary hydroxyl groups. It can be used as a urethane resin cross-linking agent and raw material for coatings. It can form advanced bridge structure, as well as maintain flexibility. | |
| Polydo GY-3000E | Kukdo Chemical Co., Ltd. | Polydo GY-3000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 3,000. It is generally used for the production of polyurethane foams and elastomers. | |
| Capromer™ PD1–10 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Fluorcolor 2200 ORG | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2200 ORG is a yellowish orange fluorescent powder. This product is most commonly used as a coating in polyurethane based paint and it has a high solvent resistance. | |
| Fluorcolor 2200 RDM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2200 RDM is an orange red fluorescent powder. This product is most commonly used as a coating in polyurethane based paint and it has a high solvent resistance. | |
| CN989 | Sartomer Americas | CN989 is a trifunctional aliphatic urethane acrylate oligomer that imparts toughness and abrasion resistance to UV/EB-cured coatings. It has high temperature resistance. Coatings and metal coatings are the recommended uses for this product. | |
| DOUBLEMER® 520 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 520 is a deca(10)-functional aliphatic urethane acrylate oligomer. It is cured via exposure to ultraviolet light and electron beam. This product is designed for lithographic, screen, gravure, roll and curtain coating applications. | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Nippolan 3114 | Tosoh Corporation | Nippolan 3114 is a two-component polyurethane adhesive in methyl ethyl ketone and toluene solvents. This product is ideal for use in plastic film (PVC, PET, PP, etc.) applications. | |
| Polurene LPI 103 | S.A.P.I.C.I. SpA | Polurene LPI 103 is an MDI-based 1K adhesive. This product has strong initial bond. It can be used in PVC applications, expanded polyurethane, and natural or synthetic fabrics. | |
| Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...view more Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. view less | |
| Borchi® Kat 0245 | Borchers, A Company of OMG | Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyuret...view more Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. This product is suitable for automotive refinishing and industrial coating. In these formulations, Borchi® Kat 0245 is characterized by its very good and consistent activity and stability, even after prolonged storage. view less | |
| GENOMER* 4335 | Rahn USA Corp. | GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be...view more GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be used for automotive coatings, industrial coatings, and outdoor applications. view less | Request Sample |
| Rexin DP 411 | S.A.P.I.C.I. SpA | Rexin DP 411 is a slightly branched solventless saturated polyester resin. This product has good chemical resistance, hardness, and flexibility. It can be used in 2K polyurethane parquet coatings. | |
| ZOLDINE XL-29SE CROSSLINKER | Univar Solutions | ZOLDINE XL-29SE CROSSLINKER is a polymeric carbodiimide crosslinking agent for two- component waterborne carboxyfunctional leather finishes. These coatings are typically based upon polyurethane dispersions (PUDs) and/or polyacrylics. | Request Sample |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for...view more TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has a viscosity (Brookfield @ 25°C) of 40-60P, a moisture content of 0.05% max., and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| Novares® LA 100 | Rain Carbon Germany GmbH | Novares® LA 100 is a liquid low viscous modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing a...view more Novares® LA 100 is a liquid low viscous modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications industrial paints and floor coatings based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Domopur 0215 35 Wa | HELIOS RESINS | Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scr...view more Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scratch resistance. view less | |
| SETATHANE® D E 2761 | Allnex | SETATHANE® D E 2761 is a Polyol emulsion used in combination with Desmodur® VL as a binder for thermal-shock resistant cementitious 3K-PUR- screed. | Request Sample |
| SETAQUA® 37-6517 | Allnex | SETAQUA® 37-6517 (formerly SETAQUA® 6517) is an acrylic polyol emulsion suitable for high durable, abrasion- and chemical resistant two-component waterborne PUR paint systems. | Request Sample |
| Chinox® 35 | Double Bond Chemical Ind., Co., Ltd. | Chinox® 35 is a hindered phenolic antioxidant designed for use in a variety of polymers. It is particularly suitable in PU systems like PU foams, coatings leathers, films, etc. Due to its specific chemical structure, low volatility, better solvent solubil...view more Chinox® 35 is a hindered phenolic antioxidant designed for use in a variety of polymers. It is particularly suitable in PU systems like PU foams, coatings leathers, films, etc. Due to its specific chemical structure, low volatility, better solvent solubility, and good resin compatibility, Chinox® 35 exhibits the excellent processing and long-term thermal stability for the protection of polymers. This product is a clear pale yellow liquid. view less | |
| VESTANAT® B 1370 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1370 is a blocked, cycloaliphatic polyisocyanate. It is supplied as a solution of 60% in n-butyl-acetate/xylene. This product is characterized by an excellent balance of reactivity and storage stability of the formulated paint. It is suitable ...view more VESTANAT® B 1370 is a blocked, cycloaliphatic polyisocyanate. It is supplied as a solution of 60% in n-butyl-acetate/xylene. This product is characterized by an excellent balance of reactivity and storage stability of the formulated paint. It is suitable for automotive OEM topcoats with improved acid etch resistance. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less | Request Sample |
| DAOTAN® TW 7000/40WA | Allnex | Daotan® TW 7000/40WA is a polyurethane dispersion with low viscosity, free of organic solvents and emulsifiers. It is specifically recommended for plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles,...view more Daotan® TW 7000/40WA is a polyurethane dispersion with low viscosity, free of organic solvents and emulsifiers. It is specifically recommended for plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles). view less | Request Sample |
