| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 225 is a PTFE and low molecular weight micronized polyethylene wax blend. FluoroSLIP® 225 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 511 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 605 is a spherical polyethylene wax and PTFE blend. FluoroSLIP® 605 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| JONCRYL® WAX 120 | BASF Dispersions & Resins | JONCRYL WAX 120 is a small particle size, very low VOC paraffin/polyethylene wax emulsion designed for water shedding, heat release, and low COF with FDA acceptability. | |
| Miraglaze™ 2540 A | Lawter | Miraglaze™ 2540 A is a sheet-fed overprint varnish that has good "stay open" and press stability properties on the press, essential during interrupted press runs. It has driers and waxes that are either dry trapped or wet. The benefits of Miraglaze™ 2540 ...view more Miraglaze™ 2540 A is a sheet-fed overprint varnish that has good "stay open" and press stability properties on the press, essential during interrupted press runs. It has driers and waxes that are either dry trapped or wet. The benefits of Miraglaze™ 2540 A are its tack stability, "stay open" properties and free-flow ability. Applications include overprints, specifically wet and dry traps and non-imprintable systems. view less | |
| S-232-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-232-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommended for use in water based inks. |
