| CN2207 | Sartomer Americas | CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and ver...view more CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and very fast cure speed. Suggested applications are coatings, metal and wood coatings, litho, offset and screen inks. view less | |
| CN2261LV | Sartomer Americas | CN2261LV is a polyester acrylate oligomer. CN2261LV was developed for UV curable wood and floor coating applications, where hardness and abrasion resistance are required. CN2261LV demonstrates excellent cure rates and impact strength. | |
| CN2262 | Sartomer Americas | CN2262 is a polyester acrylate oligomer with a Primary Irritation Index (PII) of zero. CN2262 was developed for sprayable UV curable wood coatings applications where hardness and abrasion resistance are required. CN2262 demonstrates excellent cure rates a...view more CN2262 is a polyester acrylate oligomer with a Primary Irritation Index (PII) of zero. CN2262 was developed for sprayable UV curable wood coatings applications where hardness and abrasion resistance are required. CN2262 demonstrates excellent cure rates and intra-coat adhesion. view less | |
| CN2270 | Sartomer Americas | CN2270 provides good pigment wetting, low viscosity and adhesion to polyolefins and vinyl substrates. When used in UV curable inks and clear coatings, CN2270 should be accompanied by a higher viscosity resin, such as CN119 or CN293, to improve three-roll ...view more CN2270 provides good pigment wetting, low viscosity and adhesion to polyolefins and vinyl substrates. When used in UV curable inks and clear coatings, CN2270 should be accompanied by a higher viscosity resin, such as CN119 or CN293, to improve three-roll mill pigment dispersing. view less | |
| CN2271E | Sartomer Americas | CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oli...view more CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oligomer is perfect for diluting epoxy acrylates, improving adhesion, and increasing the cure rate. Recommended uses are coatings, flexo, gravure and offset inks. view less | |
| CN2273 | Sartomer Americas | CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithograp...view more CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithographic inks. Its flexibility, low viscosity, and fast surface cure speed make CN2273 suitable for overprint varnishes and coatings requiring low odor. view less | |
| CN2279 | Sartomer Americas | CN2279 is a clear liquid, polyester acrylate grinding vehicle which has low viscosity and good pigment wetting. Dispersions and inks made with this product, exhibit low viscosity, excellent flow, excellent stability, and good color strength. It also shows...view more CN2279 is a clear liquid, polyester acrylate grinding vehicle which has low viscosity and good pigment wetting. Dispersions and inks made with this product, exhibit low viscosity, excellent flow, excellent stability, and good color strength. It also shows good adhesion, low shrinkage, and high flexibilty. CN2279 is designed for UV ink jet and UV flexographic markets. view less | |
| CN2302 | Sartomer Americas | CN2302 is a hyperbranched polyester acrylate oligomer designed with low viscosity and high functionality. Suggested applications include metal, water-based and plastic coatings, electronics, and flexo and Inkjet inks. | |
| CN2303 | Sartomer Americas | CN2303 is a hyperbranched polyester acrylate oligomer designed with low viscosity and high functionality. CN2303 possesses Low viscosity and fast surface cure. CN2303 is suited to UV/EB cured inks, hardcoats, plastic and water-based coatings. | |
| CN2304 | Sartomer Americas | CN2304 is a hyperbranched polyester acrylate oligomer designed with low viscosity and high functionality. CN2304 possesses low viscosity and fast surface cure. CN2304 is suited to UV/EB-cured inks, hardcoats, plastic and water-based coatings. | |
| CN292 | Sartomer Americas | CN292 is a multifunctional, low viscosity polyester acrylate designed as a general purpose fast reacting oligomer. Its excellent wetting properties make CN292 suitable for inks, particularly flexographic inks. | |
| CN294E | Sartomer Americas | CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment...view more CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment wetting. CN294E is used in UV curable coatings and inks including metal, paper, and plastic coatings and flexographic, screen, and lithographic inks. view less | |
| CN296 | Sartomer Americas | CN296 is a hexafunctional polyester acrylate oligomer that demonstrates good pigment wetting and fast cure in lithographic and flexographic inks and abrasion resistant coatings. | |
| CN299 | Sartomer Americas | CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including me...view more CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including metal, plastic, and paper coatings as well as flexographic, screen, and lithographic inks. This product also has good chemical resistance, good heat resistance, high abrasion resistance and good adhesion. view less | |
| EBECRYL® 1859 | Allnex | EBECRYL® 1859 is a high molecular weight polyester acrylate especially developed for high speed UV, HUV, UV LED, and EB cured offset lithographic inks. EBECRYL® 1859 exhibits excellent lithographic behavior, very good pigment wetting and high reactivity. | Request Sample |
| EBECRYL® 1871 | Allnex | EBECRYL® 1871 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® 1871 display excellent rheological properties ensuri...view more EBECRYL® 1871 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® 1871 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. view less | Request Sample |
| GENOMER* 4302 | Rahn USA Corp. | GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen an...view more GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen and decor varnishes; paper and board coatings premiums; and industrial coatings. The product provides outstanding weatherability and mechanical properties. The product is used as the sole oligomer or in association with other urethane acrylates and acrylate monomers. view less | Request Sample |
| HS9701 | Tianyi Chemical Engineering Material Co., Ltd. | HS9701, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in coil coatings, inks, and vacuum plating primers. This product wets pigments well and is resistant to boiling water. | |
| HS9705 | Tianyi Chemical Engineering Material Co., Ltd. | HS9705, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing inks, screen printing inks, and adhesives. This product is resistant to boiling water and exhibits low shrinkage properties. | |
| HS9706 | Tianyi Chemical Engineering Material Co., Ltd. | HS9706, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in gravure inks, inkjet printing applications, oil inks, and gravure varnishes. This product has low viscosity and is highly reactive. | |
| HS9713 | Tianyi Chemical Engineering Material Co., Ltd. | HS9713, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, silk-screen printing, flexographic printing applications, and in wooden coatings. This product wets pigments well and is flexible u...view more HS9713, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, silk-screen printing, flexographic printing applications, and in wooden coatings. This product wets pigments well and is flexible under most conditions. view less | |
| HS9714 | Tianyi Chemical Engineering Material Co., Ltd. | HS9714, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, vacuum plating primers, wooden coatings, and grinding color slurries. This product is resistant to boiling water and exhibits good ...view more HS9714, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, vacuum plating primers, wooden coatings, and grinding color slurries. This product is resistant to boiling water and exhibits good plating properties with high reactivity. view less | |
| POLYESTER ACRYLATE 03-849 | Rahn USA Corp. | POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in print...view more POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in printing inks and varnishes, overprint varnishes, plastic coatings and wood and industrial coatings. view less | Request Sample |
| Polyester Actylate SP 224 | Soltech Ltd | Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives...view more Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives, and screen inks. Polyester Actylate SP 224 is 70% polymer solid by weight with a viscosity of 50,000-100,000 at 25℃. view less | |
| Polyester Actylate SP 236 | Soltech Ltd | Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesi...view more Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236 is 60% polymer solid by weight with a viscosity of 2,400-2,800 at 25℃. view less | |
| Polyester Actylate SP 236L | Soltech Ltd | Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhes...view more Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236L is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. view less | |
| Polyester Actylate SP 238 | Soltech Ltd | Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesio...view more Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 238 is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. view less | |
| Polyester Actylate SP 260 | Soltech Ltd | Polyester Actylate SP 260 is a multifunctional polyester acrylate oligomer with 5% TMPTA that is designed to provide compatibility and heat resistance. Common applications of this product include wet lithographic inks, wet lithographic coatings, and top c...view more Polyester Actylate SP 260 is a multifunctional polyester acrylate oligomer with 5% TMPTA that is designed to provide compatibility and heat resistance. Common applications of this product include wet lithographic inks, wet lithographic coatings, and top coatings for vacuum metalizing. Polyester Actylate SP 260 is 95% polymer solid by weight with a viscosity of 6,000-14,000 at 25℃. view less | |
| Polyester Actylate SP 280 | Soltech Ltd | Polyester Actylate SP 280 is a low viscosity multi-functional polyester acrylate oligomer designed to provide light color, high gloss, fast curing, pigment wetting, and low odor. Common applications of this product include high gloss coatings, Polyester A...view more Polyester Actylate SP 280 is a low viscosity multi-functional polyester acrylate oligomer designed to provide light color, high gloss, fast curing, pigment wetting, and low odor. Common applications of this product include high gloss coatings, Polyester Actylate SP 280 is 100% polymer solid by weight with a viscosity of 2,500-3,500 at 25℃. view less | |
| Polyester Actylate SP 281 | Soltech Ltd | Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss co...view more Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 281 is 100% polymer solid by weight with a viscosity of 80-120 at 25℃. view less | |
| Polyester Actylate SP 283 | Soltech Ltd | Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, hig...view more Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 283 is 100% polymer solid by weight with a viscosity of 1,000-2,000 at 25℃. view less |
