| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...weiterlesen Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. verkürzen | |
| Flytac 197-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...weiterlesen Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made especially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. verkürzen | |
| Flytac 197-105 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...weiterlesen Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. verkürzen | |
| Flytac 197-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...weiterlesen Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. verkürzen | |
| Flytac 197-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceed...weiterlesen Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product also has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. verkürzen | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...weiterlesen Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. verkürzen | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...weiterlesen Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. verkürzen | |
| Glycerol Ester of Gum Rosin | Qingdao Sun Chemical Corporation Limited | Glycerol Ester of Gum Roson is an organic compound made by high-quality pinus massoniana rosin and glycerol. It’s a natural tackily resin which has excellent performance and, after the intensive processing (esterification, decolorization,stabilization tre...weiterlesen Glycerol Ester of Gum Roson is an organic compound made by high-quality pinus massoniana rosin and glycerol. It’s a natural tackily resin which has excellent performance and, after the intensive processing (esterification, decolorization,stabilization treatment,etc.), has merits such as light color and low odor. It is ideal for paint, hot melt, as well as pressure sensitive adhesives and coatings. This product has a softening point of 85 ± 2°C, an acid value of 7mg KOH/g, and an ash content of < 0.01%. verkürzen | |
| GLYCEROL ESTER OF GUM ROSIN 85 (PM-003) | PT. NASCO | GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture variou...weiterlesen GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color. verkürzen | |
| Gum Rosin | LUKEM D.O.O. | Gum Rosin is a light yellow, transparent solid with a softening point of 76ºC. This product is used as a raw material in coatings and synthetic resins. | |
| GUM ROSIN INDONESIAN (PM-002) | PT. NASCO | GUM ROSIN INDONESIAN is made up of various resin acids such as Abietic, Palustric, Isopimaric, Mercusic Acids. | |
| Gum Rosin WG | SWISLOYD LIMITED | Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents...weiterlesen Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. verkürzen | |
| Gum Rosin WW | SWISLOYD LIMITED | Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic so...weiterlesen Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. verkürzen | |
| Gum Rosin, WW-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, WW-Grade, in the form of a pale yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. | |
| Gum Rosin [WW/WG Grade] | Industrial Oleochemical Products | Gum Rosin [WW/WG Grade] is a standard grade gum rosin in a nugget-sized particle form. This product is most commonly used in hot-melt and pressure-sensitive adhesive applications. | |
| Gum Rosin X | SWISLOYD LIMITED | Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many ...weiterlesen Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. verkürzen | |
| Gum Rosin, X-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents...weiterlesen Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. verkürzen | |
| HR100 | Tianyi Chemical Engineering Material Co., Ltd. | HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...weiterlesen HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. verkürzen | |
| HR100A | Tianyi Chemical Engineering Material Co., Ltd. | HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...weiterlesen HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. verkürzen | |
| HR100B | Tianyi Chemical Engineering Material Co., Ltd. | HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...weiterlesen HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. verkürzen | |
| HR105 | Tianyi Chemical Engineering Material Co., Ltd. | HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...weiterlesen HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. verkürzen | |
| HR110 | Tianyi Chemical Engineering Material Co., Ltd. | HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...weiterlesen HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging verkürzen | |
| HR95 | Tianyi Chemical Engineering Material Co., Ltd. | HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing ...weiterlesen HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. verkürzen | |
| MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 (PM-004) | PT. NASCO | MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity i...weiterlesen MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity in solutions used in formulating Nitrocellulose based formulations. It exhibits good hardness, high gloss and vest fest drying speed. verkürzen | |
| ML100 | Guangxi Zhongchang Resin Co., Ltd. | ML100 is a light yellow flaky solid and a specialty road making resin derived from natural gum rosin. This product has characteristics such as light color, high softening point , ultraviolet absorption, free radical capture, peroxide decompose and active ...weiterlesen ML100 is a light yellow flaky solid and a specialty road making resin derived from natural gum rosin. This product has characteristics such as light color, high softening point , ultraviolet absorption, free radical capture, peroxide decompose and active oxygen diminish. It does not pollute the air and contains strong wear and leveling that enables anti-yellowing and anti-aging advantages. verkürzen | |
| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...weiterlesen PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. verkürzen | |
| Polimelt P102 | Respol Resinas | Polimelt P102 is a tail oil rosin ester that can be used in road marking inks. This product has a softening point between 100-106 degrees Celsius and is designed for formulations with good resistance to thermal degradation and good oxidation stability. ...weiterlesen Polimelt P102 is a tail oil rosin ester that can be used in road marking inks. This product has a softening point between 100-106 degrees Celsius and is designed for formulations with good resistance to thermal degradation and good oxidation stability. Its acid value is less than 15 mg of potassium hydroxide per gram. verkürzen | |
| Polimelt P88 | Respol Resinas | Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg...weiterlesen Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg of potassium hydroxide per gram. verkürzen | |
| Resin for Hot Melt Road Marking R-100 | Ecopower Chemical Co., Ltd. | Resin for Hot Melt Road Marking R-100 is a gum rosin that can be used as a link for traffic marking paints and all kinds of bitumen and cement road surfaces. | |
| Resin for Hot Melt Road Marking R-105 | Ecopower Chemical Co., Ltd. | Resin for Hot Melt Road Marking R-105 is a gum rosin that can be used as a link for traffic marking paints and all kinds of bitumen and cement road surfaces. | |
| Resin for Hot Melt Road Marking R-95 | Ecopower Chemical Co., Ltd. | Resin for Hot Melt Road Marking R-95 is a gum rosin that can be used as a link for traffic marking paints and all kinds of bitumen and cement road surfaces. | |
| Tergum T100 | Respol Resinas | Tergum T100 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better c...weiterlesen Tergum T100 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better colour and higher stability. Its softening point ranges between 92-98 degrees Celsius and its acid value is less than 20 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T103 | Respol Resinas | Tergum T103 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better c...weiterlesen Tergum T103 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better colour and higher stability. Its softening point ranges between 98-105 degrees Celsius and its acid value is less than 20 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T120 | Respol Resinas | Tergum T120 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability...weiterlesen Tergum T120 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability and resistance to oxidative degradation. Its softening point ranges between 114-120 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T122 | Respol Resinas | Tergum T122 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability...weiterlesen Tergum T122 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability and resistance to oxidative degradation. Its softening point ranges between 118-124 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T19 | Respol Resinas | Tergum T19 is a gum rosin that does not crystallize. This product can be used as a tackifier for natural or synthetic adhesives. Its softening point ranges between 85-95 degrees Celsius and its acid value ranges between 135-155 mg of potassium hydroxide...weiterlesen Tergum T19 is a gum rosin that does not crystallize. This product can be used as a tackifier for natural or synthetic adhesives. Its softening point ranges between 85-95 degrees Celsius and its acid value ranges between 135-155 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T385 | Respol Resinas | Tergum T385 is a gum rosin that has been esterified with glycerol. This product can be used in adhesive formulations that require increased tack. Its softening point ranges between 80-86 degrees Celsius and its acid value is less than 12 mg of potassium...weiterlesen Tergum T385 is a gum rosin that has been esterified with glycerol. This product can be used in adhesive formulations that require increased tack. Its softening point ranges between 80-86 degrees Celsius and its acid value is less than 12 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T39 | Respol Resinas | Tergum T39 is a liquid gum rosin ester that can be used as a viscosity regulator and a tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 20 degrees Celsius ranges between 300-500 and its acid value is...weiterlesen Tergum T39 is a liquid gum rosin ester that can be used as a viscosity regulator and a tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 20 degrees Celsius ranges between 300-500 and its acid value is less than 20 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T390 | Respol Resinas | Tergum T390 is a gum rosin that has been esterified with glycerol. This product can be used in hot-melt adhesive formulations. It increases tack while maintaining thermal stability and resistance to oxidative degradation. Its softening point ranges bet...weiterlesen Tergum T390 is a gum rosin that has been esterified with glycerol. This product can be used in hot-melt adhesive formulations. It increases tack while maintaining thermal stability and resistance to oxidative degradation. Its softening point ranges between 85-91 degrees Celsius and its acid value is less than 10 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T45 | Respol Resinas | Tergum T45 is a viscous liquid rosin ester that can be used as a tack promoter for acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 35 degrees Celsius ranges between 400-500 and its acid value is less than 15 mg of p...weiterlesen Tergum T45 is a viscous liquid rosin ester that can be used as a tack promoter for acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 35 degrees Celsius ranges between 400-500 and its acid value is less than 15 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T459 | Respol Resinas | Tergum T459 is a gum rosin ester. This product is soluble in aliphatic solvents and allows for the production of higher-solid content adhesives. Its softening point ranges between 97-103 degrees Celsius and its acid value is less than 10 mg of potassium...weiterlesen Tergum T459 is a gum rosin ester. This product is soluble in aliphatic solvents and allows for the production of higher-solid content adhesives. Its softening point ranges between 97-103 degrees Celsius and its acid value is less than 10 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T47 | Respol Resinas | Tergum T47 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 50 degrees Celsius ranges between 230-280 degrees Celsius and i...weiterlesen Tergum T47 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 50 degrees Celsius ranges between 230-280 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. verkürzen | |
| Tergum T49 | Respol Resinas | Tergum T49 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter for acrylic dispersion adhesives and natural rubber-based adhesives. This product's poise viscosity at 50 degrees Celsius ranges between 380-420 and its ...weiterlesen Tergum T49 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter for acrylic dispersion adhesives and natural rubber-based adhesives. This product's poise viscosity at 50 degrees Celsius ranges between 380-420 and its acid value is less than 15 mg of potassium hydroxide per gram. verkürzen | |
| TURPENTINE OIL INDONESIA (PM-001) | PT. NASCO | TURPENTINE OIL INDONESIA is a colorless to pale yellow, liquid of Pinus merkusii (Sumatran Pine). |
