AACH-7172 | Elementis |
|
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and...view more
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and also contributes to reduced visible white residue. Normal application will provide a minimum of 24 hours wetness and odor protection. view less
Compliance Highlights Unavailable
|
|
AAZG-531 | Elementis |
|
AAZG-531 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, roll-ons and creams.
Compliance Highlights Available
|
|
AAZG-7167 | Elementis |
|
AAZG-7167 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, soft solids, roll-ons and creams.
Compliance Highlights Available
|
|
ACH-321 | Elementis |
|
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shi...view more
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shipping weight. view less
Compliance Highlights Unavailable
|
|
Actigum™ VSX 20 texturizer | Cargill Agricola S/A |
|
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional b...view more
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional benefits such as a high yield value resulting in good suspending properties, and a higher viscosity than what can be obtained with the individual ingredients at the same dosage. This product is recommended for skin care, sun care, toiletries, and hair care products. view less
Compliance Highlights Available
|
|
ALFOL 1618 | Sasol Chemicals |
|
ALFOL 1618 is a high purity ethylene-based cetearyl alcohol, equivalent to oleo-chemical alcohols. It is a white solid with a sweet pungent odor and is rapidly biodegradable. It can be used as is in personal care formulations or as feedstock for various c...view more
ALFOL 1618 is a high purity ethylene-based cetearyl alcohol, equivalent to oleo-chemical alcohols. It is a white solid with a sweet pungent odor and is rapidly biodegradable. It can be used as is in personal care formulations or as feedstock for various chemical reactions. view less
Compliance Highlights Unavailable
|
Request Sample |
AZG-364 | Elementis |
|
AZG-364 is specially prepared for dissolving in aqueous formulations, and results in a stable viscosity profile.
Compliance Highlights Available
|
|
AZG-368 | Elementis |
|
AZG-368 is an aqueous solution of standard aluminum zirconium tetrachlorohydrex glycine that out- performs Al-only actives. AZG-368 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as aqueous creams and clear gels.
Compliance Highlights Available
|
|
AZG-370 | Elementis |
|
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in ...view more
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in anhydrous suspension sticks, roll-ons and soft solids. view less
Compliance Highlights Available
|
|
AZG-442 | Elementis |
|
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqu...view more
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqueous creams. view less
Compliance Highlights Available
|
|
BENTONE GEL® 1002 V | Elementis |
|
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL...view more
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® 1002 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® 1002 V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® ABO V | Elementis |
|
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil ha...view more
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil has a unique molecular sructure with a high percentage of unsaturated C22 fatty acids. It is a non-greasy oil providing an elegant cushioning skin feel and a natural luster, lubricity and softeness to hair, as well as aiding pigment dispersion in decorative cosmetics. BENTONE GEL® ABO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ABO V is an excellent alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® CAO V | Elementis |
|
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® ...view more
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® CAO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® DM5 V | Elementis |
|
BENTONE GEL® DM5 V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in dimethicone.
Compliance Highlights Unavailable
|
|
BENTONE GEL® EUG V | Elementis |
|
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also pa...view more
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® EUG V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® GTCC V | Elementis |
|
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BE...view more
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® GTCC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® GTCC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® HS V | Elementis |
|
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control ...view more
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® IHD V | Elementis |
|
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is ...view more
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IHD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® IPM V | Elementis |
|
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based...view more
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IPM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IPM V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® ISD V | Elementis |
|
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is...view more
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ISD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® LC V | Elementis |
|
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological cont...view more
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the oil phase of cosmetics. It is an easily spreadable, volatile and non-oily emollient, which leaves a soft, non-tacky skin feel. view less
Compliance Highlights Available
|
|
BENTONE GEL® LIP V | Elementis |
|
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed...view more
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. BENTONE GEL® LIP V provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances aesthetics by masking greasy and tacky components and imparts a pleasant residual silkiness on the skin. BENTONE GEL® LIP V is especially designed to impart cushion and slip to lip products. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® MIO V | Elementis |
|
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is a...view more
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® MIO V HV | Elementis |
|
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particula...view more
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V HV is an alternative to traditional polymer or cellulose-based thickeners
for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® OLV V | Elementis |
|
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTON...view more
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTONE GEL® OLV V can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OLV V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® OMS V | Elementis |
|
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V i...view more
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OMS V is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® PTIS V | Elementis |
|
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to i...view more
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics, while providing cushion emollience, persisting and lubricious skin feel, high pigment wetting, and glossing films. BENTONE GEL® PTIS V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin, enhances UV protection in sunscreens. BENTONE GEL® PTIS V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® PTM V | Elementis |
|
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheologica...view more
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. It is an easily spreadable, non-oily emollient, which leaves a soft, non-tacky, skin feel and improves the gloss and softness of hair. BENTONE GEL® PTM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® PTM V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® SS71 V | Elementis |
|
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rholog...view more
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rhological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® SS71 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® SS71 V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® TN V | Elementis |
|
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also par...view more
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® TN V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® VS-5 PC V | Elementis |
|
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-...view more
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-5 PC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® VS-5 PC V HV | Elementis |
|
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also par...view more
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® VS-5 V | Elementis |
|
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V ...view more
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V is an alternative to traditional polymer or cellulose -based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® VS-5 V HV | Elementis |
|
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also partic...view more
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE GEL® VS1 V | Elementis |
|
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological contro...view more
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. BENTONE GEL® VS1 V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS1 V is an alternative to rheological additives containing Cyclopentasiloxane, traditional polymers and Cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE HYDROCLAY™ 1100 | Elementis |
|
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control witho...view more
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity.
BENTONE HYDROCLAY™ 1100 is an acid- stable clay and has the ability to absorb oils in skin treatments. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE HYDROCLAY™ 2000 | Elementis |
|
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirem...view more
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE HYDROCLAY™ 2001 | Elementis |
|
BENTONE HYDROCLAY™ 2001 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
BENTONE HYDROCLAY™ 2100 | Elementis |
|
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension con...view more
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity. view less
Compliance Highlights Unavailable
|
|
BENTONE HYDROCLAY™ 550 | Elementis |
|
BENTONE HYDROCLAY™ 550 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
BENTONE HYDROCLAY™ 900 | Elementis |
|
BENTONE HYDROCLAY™ 900 is an organically-modified hectorite clay additive designed for the water phase of cosmetics. It's a highly efficient thickener providing significantly higher viscosity than other clay-based additives.
Compliance Highlights Unavailable
|
|
BENTONE® LUXE WN | Elementis |
|
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE ...view more
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE WN apply easily without leaving a greasy film on the skin. This emulsifying gel can create water in oil systems containing extremely high water content, creating a hydrating sensation. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE® LUXE WO | Elementis |
|
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a...view more
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a greasy film on the skin. This light texture allows for high oil concentrations that can be used for dry, damaged skin, yet feels light and silky for even oily skin types. This unique ability to deliver high loads of oil with a dry elegant skin feel make BENTONE® LUXE WO ideal for all skin types. BENTONE® LUXE WO can be used in color cosmetics or sunscreens to disperse and suspend pigments and actives. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE® LUXE WS | Elementis |
|
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. I...view more
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. It improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This grade is designed to impart rheological control and suspension to silicone-based cosmetics and emulsion systems. It provides thermostable viscosity control of the emulsion's oil phase. It aids in dispersing pigments and sunscreen actives for even coverage. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
BENTONE® LUXE XO | Elementis |
|
BENTONE® LUXE XO provides emulsification and rheological properties for silicone free water in oil systems. It also creates extremely stable emulsions with the ability to create a variety of textures.
Compliance Highlights Available
|
|
BETAFAN™ M | Elementis |
|
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine sys...view more
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine systems (e.g. alpha olefin sulfonates) tend to irritate because they defat tissue. Therefore, formulators add unsaturated molecules such as oleyl amides and oleyl betaines to mitigate the irritation, but these materials tend to oxidize to aldehydes and do not smell good. As a result, high fragrance levels are required. BETAFAN-M systems reduce this effect. BETAFAN™ M can be used in surfactant and nonsurfactant systems for effective conditioning. view less
Compliance Highlights Unavailable
|
|
CARINEX SL A | Sasol Chemicals |
|
CARINEX SL A is a mild and higher foaming acidic sophorolipid specifically designed to maximize formulation design flexibility and efficiency.
Compliance Highlights Unavailable
|
Request Sample |
CARINEX SL L | Sasol Chemicals |
|
CARINEX SL L is a mild and low-foaming lactonic sophorolipid specifically designed to maximize formulation design flexibility and efficiency.
Compliance Highlights Unavailable
|
Request Sample |
CERALUTION CPE | Sasol Chemicals |
|
CERALUTION CPE is an emulsion concentrate for the preparation of low viscous O/W-emulsions. The preparation for cold-cold or hot-cold handling is easy without the use of special homogenisation equipment. It is tolerant to all oil polarities, electrolytes ...view more
CERALUTION CPE is an emulsion concentrate for the preparation of low viscous O/W-emulsions. The preparation for cold-cold or hot-cold handling is easy without the use of special homogenisation equipment. It is tolerant to all oil polarities, electrolytes and surfactants. This product can be used in formulations for creams, lotions, sprays, wet wipes, and foam skin care products as well as rinse-off products like shower gels. view less
Compliance Highlights Unavailable
|
Request Sample |
CERALUTION ES RSPO-MB | Sasol Chemicals |
|
CERALUTION ES (INCI: Ceteareth-25 (and) Disodium Ethylene Dicocamide PEG-15 Disulfate) is a very efficient and versatile emulsifier/dispersant for low viscous O/W emulsions with low viscosity for sprays and mousses. It is very stable with no phase separat...view more
CERALUTION ES (INCI: Ceteareth-25 (and) Disodium Ethylene Dicocamide PEG-15 Disulfate) is a very efficient and versatile emulsifier/dispersant for low viscous O/W emulsions with low viscosity for sprays and mousses. It is very stable with no phase separation and is applicable for a broad range of products. These include Sunscreen, After-sun, Self-tanning and Whitening products. view less
Compliance Highlights Available
|
Request Sample |
CERALUTION H RSPO-MB | Sasol Chemicals |
|
CERALUTION H RSPO-MB (INCI: Behenyl Alcohol (and) Glyceryl Stearate (and) Glyceryl Stearate Citrate (and) Disodium Ethylene Dicocamide PEG-15 Disulfate) is a multifunctional O/W emulsifier for creams and lotions, sunscreens and colour cosmetics as well as...view more
CERALUTION H RSPO-MB (INCI: Behenyl Alcohol (and) Glyceryl Stearate (and) Glyceryl Stearate Citrate (and) Disodium Ethylene Dicocamide PEG-15 Disulfate) is a multifunctional O/W emulsifier for creams and lotions, sunscreens and colour cosmetics as well as pump foams. It facilitates formulation ceramide products in lotions and creams, forms stable, dense and creamy pump foams, improves skin moisturization, reduces free radicals on skin and reduces wrinkles, and imparts an elegant skin-feel. In sunscreens and color cosmetics it improves the dispersion of Titanium Dioxide and Zinc Oxide, improves the stability of Zinc Dioxide, increases SPF due to the better dispersion of filters, and provides water resistance properties. view less
Compliance Highlights Unavailable
|
Request Sample |
CHLORHYDROL 50 | Elementis |
|
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and cle...view more
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and clear pump sprays. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
COSMACOL EBL | Sasol Chemicals |
|
COSMACOL EBL (INCI: C12-15 ALKYL BENZOATE) is a highly pure Benzoic ester of primary Fatty Alcohol having a hydrocarbon chain ranging between C12-C15. This multifunctional emollient acts as a wetting and dispersing agent, is highly spreadable and provides...view more
COSMACOL EBL (INCI: C12-15 ALKYL BENZOATE) is a highly pure Benzoic ester of primary Fatty Alcohol having a hydrocarbon chain ranging between C12-C15. This multifunctional emollient acts as a wetting and dispersing agent, is highly spreadable and provides a very light touch. It is particularly suitable for sunscreen and makeup products for its ability to disperse respectively UV filters and pigments. As well as being an excellent solvent for sunscreen filters, this product can be used in a wide range of cosmetic formulations. view less
Compliance Highlights Available
|
Request Sample |
COSMACOL ECI | Sasol Chemicals |
|
COSMACOL ECI (INCI: Tri C12-C13 ALKYL CITRATE) is the citric acid tri-ester of primary mono branched C12/13-alcohol isomers. This light, multifunctional emollient acts as a wetting and dispersing agent and a hair conditioner. This product exhibits a light...view more
COSMACOL ECI (INCI: Tri C12-C13 ALKYL CITRATE) is the citric acid tri-ester of primary mono branched C12/13-alcohol isomers. This light, multifunctional emollient acts as a wetting and dispersing agent and a hair conditioner. This product exhibits a light touch and is therefore suitable in skin care products for greasy skin where it also functions as a sebum regulator. This ester can also be used in antiperspirant/deodorant formulations to prevent stickiness of inorganic salts. Due to its hydrophilic groups, it is used as a dispersing agent for pigments in makeup products as well as for UV filters in sunscreens. view less
Compliance Highlights Available
|
Request Sample |
COSMACOL ECL | Sasol Chemicals |
|
COSMACOL ECL (INCI: Tri C14-C15 ALKYL CITRATE) is a soft, flaked waxy emollient that improves spreadability as well as the viscosity of O/W formulations and to reduce the stickiness of formulations. It also shows a mild keratolytic effect, making it a sui...view more
COSMACOL ECL (INCI: Tri C14-C15 ALKYL CITRATE) is a soft, flaked waxy emollient that improves spreadability as well as the viscosity of O/W formulations and to reduce the stickiness of formulations. It also shows a mild keratolytic effect, making it a suitable addition to products for atopic skin. This product can also be used in makeup products such as lipsticks and pencils to improve stability against blooming. A multifunctional emollient for application in Cosmetic fields. view less
Compliance Highlights Available
|
Request Sample |
COSMACOL ELI | Sasol Chemicals |
|
COSMACOL ELI (INCI: C12-13 ALKYL LACTATE) is a versatile, polar multifunctional emollient, which allows it to exhibit most of the peculiar characteristics of lactic acid derivatives, such as moisturizing and a mild keratolytic effect, making it suitable f...view more
COSMACOL ELI (INCI: C12-13 ALKYL LACTATE) is a versatile, polar multifunctional emollient, which allows it to exhibit most of the peculiar characteristics of lactic acid derivatives, such as moisturizing and a mild keratolytic effect, making it suitable for skin care products targeted for different types of skin, from dry to greasy. It is also used as a wetting and dispersing agent in makeup. It has a thickening effect on SLES/Betaine systems as well as anti-irritant properties and can be used in a wide range of personal care products including lines for delicate and atopic skin. This product is a mild body odor reducing agent which allows for decreased percentages of other common actives in antiperspirant/deodorants. In anti-dandruff formulations, it reduces irritation and itching, improves formulation stability and viscosity. Adding glycerin to an alcohol-based disinfectant gives back some moisture but makes the formulation sticky. Replacing a portion of the glycerin with COSMACOL ELI solves the problem. Adding glycerin to an alcohol-based disinfectant gives back some moisture but makes the formulation sticky. Replacing a portion of the glycerin with COSMACOL ELI solves the problem. view less
Compliance Highlights Available
|
Request Sample |
COSMACOL EMI | Sasol Chemicals |
|
COSMACOL EMI (INCI: Di-C12-13 ALKYL MALATE) is a non greasy lipid, very similar to the hydro-lipidic cutaneous layer. This multifunctional emollient can be easily used in emulsion or anhydrous, where is provides a particular spreadability. This product sh...view more
COSMACOL EMI (INCI: Di-C12-13 ALKYL MALATE) is a non greasy lipid, very similar to the hydro-lipidic cutaneous layer. This multifunctional emollient can be easily used in emulsion or anhydrous, where is provides a particular spreadability. This product shows outstanding moisturizing properties providing a benefit in treatment of aged skin as well as greasy skin as a sebum regulator. This ester provides a rich texture without leaving a greasy feeling on the skin, even when a high dosage of waxes are used. In hair care formulations, it improves silkiness and overall dry manageability of the hair. view less
Compliance Highlights Available
|
Request Sample |
COSMACOL N II-9 | Sasol Chemicals |
|
COSMACOL N II-9 (INCI: C12-13 PARETH-9) is a high performance emulsifier/solubilizer for fragrances and essential oils in water, aqueous-alcoholic mixtures and aqueous surfactant systems, showing no impact on viscosity and foaming properties.
Compliance Highlights Available
|
Request Sample |
COSMACOL OE | Sasol Chemicals |
|
COSMACOL OE (INCI: Dicaprylyl Ether) is a very light and fast spreading, low polar oil emollient. It is compatible with silicones, lipophilic cosmetic ingredients and UV filters. This emollient has wetting properties in color cosmetics, is highly stable a...view more
COSMACOL OE (INCI: Dicaprylyl Ether) is a very light and fast spreading, low polar oil emollient. It is compatible with silicones, lipophilic cosmetic ingredients and UV filters. This emollient has wetting properties in color cosmetics, is highly stable against oxidation, readily biodegradable, suitable for a wide pH range, and improves skin-feel, reduces tackiness and oil in W/O emulsions. view less
Compliance Highlights Available
|
Request Sample |
COSMACOL PE 50 | Sasol Chemicals |
COSMACOL PE 50 is a slurry of Sodium Laureth Sulphate, Glycol Distearate, Non-ionic surfactant and Lactic ester in water. It is manufactured in Terranova dei Passerini (LO) plant. Due to its composition COSMACOL PE 50 is a thickening and foam boosting age...view more
COSMACOL PE 50 is a slurry of Sodium Laureth Sulphate, Glycol Distearate, Non-ionic surfactant and Lactic ester in water. It is manufactured in Terranova dei Passerini (LO) plant. Due to its composition COSMACOL PE 50 is a thickening and foam boosting agent. view less
Compliance Highlights Unavailable
|
Request Sample | |
EA-3105 | Elementis |
|
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly use...view more
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly useful in emulsions and can be used in ""cold process"" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. EA-3105 is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
EMULDAC AS-25 | Sasol Chemicals |
|
EMULDAC AS-25 (INCI: CETEARETH-25) is widely used as dispersing agent in industrial applications, in particular in polyester dyeing processes and emulsion polymerizations. EMULDAC AS-25 is suitable for detergent applications in automatic dishwashing table...view more
EMULDAC AS-25 (INCI: CETEARETH-25) is widely used as dispersing agent in industrial applications, in particular in polyester dyeing processes and emulsion polymerizations. EMULDAC AS-25 is suitable for detergent applications in automatic dishwashing tablets and toilet rim blocks. EMULDAC AS-25 is also suitable for personal care applications as O/W emulsifier in a broad range of pH and as dispersant for “hair-dyeing” formulations. view less
Compliance Highlights Available
|
Request Sample |
FANCOL® CB | Elementis |
|
FANCOL® CB is a yellowish white solid obtained from the roasted seeds of Theobroma Cacao. FANCOL® CB is Cocoa Butter USP/NF grade. It is a skin conditioning occlusive agent and may be used as a skin protectant in OTC drug products. FANCOL® CB has the ab...view more
FANCOL® CB is a yellowish white solid obtained from the roasted seeds of Theobroma Cacao. FANCOL® CB is Cocoa Butter USP/NF grade. It is a skin conditioning occlusive agent and may be used as a skin protectant in OTC drug products. FANCOL® CB has the ability to maintain a molded shape, while also mixed with other products. This combined with it melting at body temperature, allowing it to release actives, makes it a good product for suppositories. FANCOL® CB has an excellent stability profile. view less
Compliance Highlights Available
|
|
FANCOL® HS3 US | Elementis |
|
FANCOL® HS3 US is a compound of non-polar triglycerides and polar phosphor- and glycol- lipids, sulfonated castor oil, propylene glycol and PEG-12 oleate. FANCOL® HS3 US is a highly effective wetting and dispersing agent and emulsifier for use in the cosm...view more
FANCOL® HS3 US is a compound of non-polar triglycerides and polar phosphor- and glycol- lipids, sulfonated castor oil, propylene glycol and PEG-12 oleate. FANCOL® HS3 US is a highly effective wetting and dispersing agent and emulsifier for use in the cosmetic industry. It has emollient, moisturizing and conditioning effects. It readily dissolves in water to produce a clear solution. It is valuable in shampoos and conditioners to impart softness and shine. view less
Compliance Highlights Unavailable
|
|
FANCOL® LA SUPERFINE-P | Elementis |
|
FANCOL® LA SUPERFINE-P is a complex mixture of pure natural fatty alcohols derived from lanolin. This mixture of organic alcohols is obtained through the hydrolysis of Lanolin. FANCOL® LA SUPERFINE-P is pastillated, making it significantly easier to work...view more
FANCOL® LA SUPERFINE-P is a complex mixture of pure natural fatty alcohols derived from lanolin. This mixture of organic alcohols is obtained through the hydrolysis of Lanolin. FANCOL® LA SUPERFINE-P is pastillated, making it significantly easier to work with. FANCOL® LA SUPERFINE-P acts as an emulsifying agent for both o/w and w/o emulsions and can be used over a wide pH range. FANCOL® LA SUPERFINE-P has a high surface activity so can reduce interfacial tension of mineral oil/water. It can also significantly increase the water absorbing capacity of hydrocarbon systems. view less
Compliance Highlights Available
|
|
FANCOL® LA-15 | Elementis |
|
FANCOL® LA-15 is the Polyethylene Glycol ether of Lanolin Alcohol. It is a primary O/W emulsifier and is 100% active. FANCOL® LA-15 is an emollient emulsifier, which provides excellent skin conditioning and effective moisturization. The powerful emulsify...view more
FANCOL® LA-15 is the Polyethylene Glycol ether of Lanolin Alcohol. It is a primary O/W emulsifier and is 100% active. FANCOL® LA-15 is an emollient emulsifier, which provides excellent skin conditioning and effective moisturization. The powerful emulsifying properties of Lanolin Alcohol are now available to create stable O/W emulsions or even microemulsions with fine emollient and spreading properties. It can couple Lanolin Oil into shampoo systems to provide emollience and conditioning to the hair after shampooing. As FANCOL® LA-15 is a nonionic material, it will show excellent stability coupled with powerful emulsifying properties under high acidic and highly alkaline conditions. view less
Compliance Highlights Available
|
|
FANCOL® POLYISO® 250-CG | Elementis |
|
FANCOL® POLYISO® 250-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 250-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 250-CG acts as a waterproofin...view more
FANCOL® POLYISO® 250-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 250-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 250-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 250-CG can be used as a substitute for Mineral Oil. FANCO®L POLYISO® 250-CG provides lubricity. FANCOL POLYISO 250-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
FANCOL® POLYISO® 275-CG | Elementis |
|
FANCOL® POLYISO® 275-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 275-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 275-CGacts as a waterproofing...view more
FANCOL® POLYISO® 275-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 275-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 275-CGacts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 275-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 275-CG provides lubricity. FANCOL® POLYISO® 275-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
FANCOL® POLYISO® 300-CG | Elementis |
|
FANCOL® POLYISO® 300-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 300-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 300-CG acts as a waterproofing...view more
FANCOL® POLYISO® 300-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 300-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 300-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 300-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 300-CG provides lubricity. FANCOL® POLYISO® 300-CGcan be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
FANCOL® POLYISO® 450-CG | Elementis |
|
FANCOL® POLYISO® 450-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 450-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 450-CG acts as a waterproofin...view more
FANCOL® POLYISO® 450-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 450-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 450-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 450-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 450-CG provides lubricity. FANCOL® POLYISO® 450-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
FANCOL® POLYISO® 800-CG | Elementis |
|
FANCOL® POLYISO® 800-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 800-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 800-CG acts as a waterproofin...view more
FANCOL® POLYISO® 800-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 800-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 800-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 800-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 800-CG provides lubricity. FANCOL® POLYISO® 800-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
FANCOL® SHEA BUTTER | Elementis |
|
FANCOL® SHEA BUTTER is a natural fat obtained from the fruit of the Shea tree. Shea Butter is an excellent ointment base. It has an unusually high content of oil unsaponifiable matter far exceeding that of Cocoa Butter. It is from this that FANCOL® SHEA B...view more
FANCOL® SHEA BUTTER is a natural fat obtained from the fruit of the Shea tree. Shea Butter is an excellent ointment base. It has an unusually high content of oil unsaponifiable matter far exceeding that of Cocoa Butter. It is from this that FANCOL® SHEA BUTTER shows its ability to protect the skin from sun and helps to ease superficial skin irritation. Its oily qualities improve skin softness. FANCOL® SHEA BUTTER is an excellent skin conditioning agent, which melts at body temperature, giving it good spreadibility. FANCOL® SHEA BUTTER enhances shine and has excellent superfatting qualities. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
FANCOL® VB | Elementis |
|
FANCOL® VB consists of vegetable derived lipids and sterol enriched shea butter extract. FANCOL® VB is extremely valuable as a moisturizer/humectant in creams, lotions, lip care and ointment based products. In color cosmetics FANCOL® VB exhibits good pig...view more
FANCOL® VB consists of vegetable derived lipids and sterol enriched shea butter extract. FANCOL® VB is extremely valuable as a moisturizer/humectant in creams, lotions, lip care and ointment based products. In color cosmetics FANCOL® VB exhibits good pigment wetting properties. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Available
|
|
FANCOR® ABYSSINIAN OIL | Elementis |
|
FANCOR® ABYSSINIAN OIL is a clear, yellow oil with a mild, pleasant odor. It is a natural oil, and is non-GMO derived. FANCOR® ABYSSINIAN OIL has a unique molecular structure not found in any other naturally occurring substance. It contains a high percen...view more
FANCOR® ABYSSINIAN OIL is a clear, yellow oil with a mild, pleasant odor. It is a natural oil, and is non-GMO derived. FANCOR® ABYSSINIAN OIL has a unique molecular structure not found in any other naturally occurring substance. It contains a high percentage of unsaturated C22 fatty acids. Furthermore, it is liquid at room temperature, even though it is of high molecular weight. FANCOR® ABYSSINIAN OIL is stable against heat breakdown and is highly resistant to oxidation.
FANCOR® ABYSSINIAN OIL has a high surface tension and gives good spreadability. It provides natural luster, lubricity and an emollient feeling to hair care products. FANCOR® ABYSSINIAN OIL provides excellent pigment wetting and is a very efficient pigment dispersant, which leaves behind an elegant cushioning skin feel. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
FANCOR® LANWAX | Elementis |
|
FANCOR® LANWAX is a high molecular weight wax ester fraction derived from natural Lanolin. It is a complex mixture of esters of straight chain, branched chain and hydroxyl fatty acids with aliphatic, steroid, triterpenoid alcohols. It also contains fatty ...view more
FANCOR® LANWAX is a high molecular weight wax ester fraction derived from natural Lanolin. It is a complex mixture of esters of straight chain, branched chain and hydroxyl fatty acids with aliphatic, steroid, triterpenoid alcohols. It also contains fatty esters of Cholesterol and other sterols. FANCOR® LANWAX is used in water in oil systems to provide firmness, emolliency, improved consistency and stability. As such, it finds wide use not only in creams and lotions, but also is most valuable in lip formulations. It will add acceptable tact to hair grooming preparations and will serve as a plasticizer in wax crayons. It is an excellent bodying agent.
FANCOR® LANWAX is valuable as a low cost replacer or extender for other natural waxes in all applications including the manufacturing of candles. Not only will it act as an emulsifier, but it also serves as a crystallization inhibitor for other waxes. In polishes it will help reduce slip without interfering with gloss. view less
Compliance Highlights Available
|
|
FANCOR® MEADOWFOAM SEED OIL | Elementis |
|
FANCOR® MEADOWFOAM SEED OIL is extracted from the seeds of the Limnanthes Alba (Meadowfoam) plant by a mechanic extrusion process and is refined afterward. It has a light yellow color and is practically odor free. FANCOR® MEADOWFOAM SEED OIL has a unique...view more
FANCOR® MEADOWFOAM SEED OIL is extracted from the seeds of the Limnanthes Alba (Meadowfoam) plant by a mechanic extrusion process and is refined afterward. It has a light yellow color and is practically odor free. FANCOR® MEADOWFOAM SEED OIL has a unique molecular structure not found in any other naturally occurring substance. FANCOR® MEADOWFOAM SEED OIL contains approximately 95% fatty acids having chain lengths of 20-22 Carbon atoms. The typical fatty acid profile is as follows: C20:1(61%), C22:1(16%) and C22:2(18%). Most importantly, the unsaturated double bonds are located at the Δ5 and Δ13 position. Combination of lack of conjugated double bonds and carrying its natural antioxidant brings this oil extraordinary oxidative stability. Furthermore, it is liquid at room temperature regardless its high molecular weight. It is effective against heat breakdown and is resistant to oxidation. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Available
|
|
FANCORSIL® LIM-1 | Elementis |
|
FANCORSIL® LIM-1 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-1 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and t...view more
FANCORSIL® LIM-1 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-1 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and the properties of silicone in a single molecule. FANCORSIL® LIM-1 is soluble in water. FANCORSIL® LIM-1 has excellent conditioning and moisturizing properties in both skin and haircare applications. FANCORSIL® LIM-1 can be absorbed into the hair cuticle and help repair damaged hair. FANCORSIL® LIM-1 can be used as a shine enhancer in decorative cosmetics and hair care products while also helping to build body to the formulation. FANCORSIL® LIM-1 does not depress foam, but adds density and more creaminess to the foam. view less
Compliance Highlights Available
|
|
FANCORSIL® LIM-2 | Elementis |
|
FANCORSIL® LIM-2 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-2 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and ...view more
FANCORSIL® LIM-2 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-2 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and the properties of silicone in a single molecule.
FANCORSIL® LIM-2 is not soluble in water and is easily emulsified with hair and skin care systems to contribute lubricity without greasiness. FANCORSIL® LIM-2 has excellent conditioning and moisturizing properties in both skin and hair care leave-on applications. FANCORSIL® LIM-2 can be absorbed into the hair cuticle and help repair damaged hair. FANCORSIL® LIM-2 can be used as a shine enhancer in hair care products while also helping to build body to the formulation. view less
Compliance Highlights Unavailable
|
|
Flocare™ C 106 MV | SNF SAS |
|
Flocare™ C 106 MV improves slip without snagging. Use in high pH or highly reactive formulations such as bleaches, hair color, or relaxers. This grade is self-preserved.
Compliance Highlights Unavailable
|
|
Flocare™ C107 LMPF | SNF SAS |
|
Flocare™ C107 LMPF is a highly charged cationic copplymer. It appears as a clear viscous liquid. It is particularly compatible in surfactant system. It is then recommended for all foaming formulations where it provides rich and creamy foam. In shampoos, i...view more
Flocare™ C107 LMPF is a highly charged cationic copplymer. It appears as a clear viscous liquid. It is particularly compatible in surfactant system. It is then recommended for all foaming formulations where it provides rich and creamy foam. In shampoos, it brings conditioning, anti-static and gloss properties to the hair. In body wash, it provides conditioning properties and soft after feel to the skin together with moisturizing effet. Flocare™ C-107 allows clear formulations. view less
Compliance Highlights Unavailable
|
|
Flocare™ C111 PF | SNF SAS |
|
Flocare™ C 111 PF appears as a clear viscous liquid. It is a film forming cationic polymer recommended for hair care applications. It is specially designed for mousses, creams and spray products where fixative, conditioning and moisturizing properties are...view more
Flocare™ C 111 PF appears as a clear viscous liquid. It is a film forming cationic polymer recommended for hair care applications. It is specially designed for mousses, creams and spray products where fixative, conditioning and moisturizing properties are requested. Flocare™ C 111 PF is soluble in water and alcohol and formulation and suitable for formulation at pH> 5. view less
Compliance Highlights Unavailable
|
|
Flocare™ C122 PF | SNF SAS |
|
Flocare™ C122 PF is an amphoteric copolymer in liquid form. It appears as a viscous liquid. It is used as a conditioning ingredient. It also exhibits good stiffness and humidity resistance properties . It is ideally suited for hair care products when form...view more
Flocare™ C122 PF is an amphoteric copolymer in liquid form. It appears as a viscous liquid. It is used as a conditioning ingredient. It also exhibits good stiffness and humidity resistance properties . It is ideally suited for hair care products when formulated in extreme pH as hair dye, hair bleach... view less
Compliance Highlights Unavailable
|
|
Flocare™ C139 PF | SNF SAS |
|
Flocare™ C139 PF is an amphoteric copolymer in liquid form. It is used as a conditioning ingredient. It is ideally suited for liquid cleansing products where it brings rich and stable foam. Flocare™ C139 provides excellent wet and dry combing properties i...view more
Flocare™ C139 PF is an amphoteric copolymer in liquid form. It is used as a conditioning ingredient. It is ideally suited for liquid cleansing products where it brings rich and stable foam. Flocare™ C139 provides excellent wet and dry combing properties in hair care application, specially for damaged hair. In Skin Care, it provides silky skin feel and moisturization. view less
Compliance Highlights Unavailable
|
|
Flocare™ DE 15A | SNF SAS |
|
Flocare™ DE 15A is a cross-linked acrylate copolymer with excellent clarity. It is an easy to use liquid rheology modifier designed to enhance viscosity, stabilize and added sensorial benefits to surfactant-based personal cleansing products and soap-based...view more
Flocare™ DE 15A is a cross-linked acrylate copolymer with excellent clarity. It is an easy to use liquid rheology modifier designed to enhance viscosity, stabilize and added sensorial benefits to surfactant-based personal cleansing products and soap-based cleansing systems. view less
Compliance Highlights Unavailable
|
|
Flocare™ DE 21 | SNF SAS |
Flocare™ DE 21 is a milky, liquid with a low charge density. It is suitable for use in many personal care applications.
Compliance Highlights Unavailable
|
||
Flocare™ ES 502 | SNF SAS |
|
Flocare™ ES 502 is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It brings viscosity and texture to your formulation. This product allows formulations containing high content of electrolytes. It brings rich texture with ...view more
Flocare™ ES 502 is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It brings viscosity and texture to your formulation. This product allows formulations containing high content of electrolytes. It brings rich texture with powdery effet, dedicated for sun cream, depilatory formula, cream color. view less
Compliance Highlights Unavailable
|
|
Flocare™ ET 100 | SNF SAS |
|
Flocare™ ET 100 is a milky, viscous anionic liquid. It is suitable for use in many personal care applications.
Compliance Highlights Unavailable
|
|
Flocare™ ET 1237 PP1 | SNF SAS |
|
Flocare™ ET 1237 PP1 is a ready and easy to use liquid dispersion polymer which instantaneously brings viscosity and texture together with conditioning performances. This combination of properties allows to minimize the number of ingredients in the formul...view more
Flocare™ ET 1237 PP1 is a ready and easy to use liquid dispersion polymer which instantaneously brings viscosity and texture together with conditioning performances. This combination of properties allows to minimize the number of ingredients in the formulation. It also allows formulators to optimize the number of ingredients. Flocare™ ET 1237 it can be used in skin or hair application. Designed for use in the presence of cationic systems, it is specially dedicated for hair or skin creams around a 2% use level. view less
Compliance Highlights Available
|
|
Flocare™ ET 1737 GPG | SNF SAS |
|
Flocare™ ET 1737 GPG can be used in low pH skin or hair application. Designed for use in the presence of nonionic and cationic ingredients, Flocare™ ET 1737 GPG provides high thickening and conditioning properties to the hair and skin. Provides an excell...view more
Flocare™ ET 1737 GPG can be used in low pH skin or hair application. Designed for use in the presence of nonionic and cationic ingredients, Flocare™ ET 1737 GPG provides high thickening and conditioning properties to the hair and skin. Provides an excellent sensorial profile to any skin or hair formulation. view less
Compliance Highlights Available
|
|
Flocare™ ET 30 | SNF SAS |
|
Flocare™ ET 30 is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It brings viscosity and texture to your formulation. It is recommended for Skin care applications . It is designed for facial creams containing actives wher...view more
Flocare™ ET 30 is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It brings viscosity and texture to your formulation. It is recommended for Skin care applications . It is designed for facial creams containing actives where fresh touch is required during the application and soft touch after application, such as antiaging or anti acne creams. view less
Compliance Highlights Unavailable
|
|
Flocare™ ET 305 | SNF SAS |
|
Flocare™ ET 305 is a milky, viscous anionic liquid. It is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Flocare™ ET 36V | SNF SAS |
|
Flocare™ ET 36V is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It brings viscosity and texture to your formulation. It is recommended for Skin care applications containing electrolytes . It is designed for facial cream...view more
Flocare™ ET 36V is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It brings viscosity and texture to your formulation. It is recommended for Skin care applications containing electrolytes . It is designed for facial creams with actives where fresh touch is required during the application and soft touch after application, such a antiaging or anti acne. view less
Compliance Highlights Unavailable
|
|
Flocare™ ET 75 | SNF SAS |
|
Flocare™ ET 75 is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It instantaneously brings viscosity and texture to your formulation. Suitable for both cold and hot formulation process, It can be introduced in any formula...view more
Flocare™ ET 75 is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It instantaneously brings viscosity and texture to your formulation. Suitable for both cold and hot formulation process, It can be introduced in any formulation phase at any stage of the process. It is recommended for skin care applications where rich and pleasant texture, non greasy feel and powdered after feel effect are required. It is designed for day or night formulations at neutral pH. From most simple to most sophisticated formulations, Flocare™ ET 75 will satisfy your formulation needs. view less
Compliance Highlights Unavailable
|
|
Flocare™ ET 76 | SNF SAS |
|
Flocare™ ET 76 is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It instantaneously brings viscosity and texture to your formulation. It is recommended for Skin care applications where rich and pleasant texture, non greas...view more
Flocare™ ET 76 is a ready and easy to use liquid dispersion polymer. It appears as a white liquid. It instantaneously brings viscosity and texture to your formulation. It is recommended for Skin care applications where rich and pleasant texture, non greasy feel and powdered after feel effect are required. It is designed for day or night formulations at neutral pH. view less
Compliance Highlights Unavailable
|
|
Flocare™ FX 100 | SNF SAS |
|
Flocare™ FX 100 appears as a clear liquid. It exhibits stiffness and humidity resistance properties and is specially recommended for fixing resins.
Compliance Highlights Unavailable
|
|
Flocare™ NAT 132 | SNF SAS |
|
Flocare™ NAT 132 is a milky, viscous anionic liquid. It is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Flocare™ PSD 1037 LV | SNF SAS |
|
Flocare™ PSD 1037 LV is a fine powder swellable in water. It increases volume effect, especially for fine hair. Also provides hair combability, elasticity, and shine. Recommended when high electrolyte stability is required.
Compliance Highlights Unavailable
|
|
Flocare™ PSD 1037 XT | SNF SAS |
|
Flocare™ PSD 1037 XT is a fine powder cold processed in water. It increases volume effect, especially for fine hair. Also provides hair combability, elasticity, and shine. Recommended for transparent gel formulations with excellent sensorial benefits.
Compliance Highlights Unavailable
|
|
Flocare™ PSD 30 | SNF SAS |
|
Flocare™ PSD 30 is a water swellable fine powder. It brings viscosity and texture to your formulations. It allows opalescent formulations; non tacky and non greeasy feel, suitable for serum, hydro-alcohol gels;
Compliance Highlights Unavailable
|
|
Flocare™ SK 403 | SNF SAS |
|
Flocare™ SK 403 provides clear and viscous cold process formulations. It is a fine, white powder with no discernible odor.
Compliance Highlights Unavailable
|