| BURGESS 2211 | Burgess Pigment Company | BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...view more BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...view more BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...view more BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS CB | Burgess Pigment Company | BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS ICEBERG® | Burgess Pigment Company | BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...view more BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. view less | |
| BURGESS ICECAP K® | Burgess Pigment Company | BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...view more BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS KE | Burgess Pigment Company | BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...view more BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 20 | Burgess Pigment Company | BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...view more BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...view more BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS NO. 40 | Burgess Pigment Company | BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives. | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS NO. 97 | Burgess Pigment Company | BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints. | |
| BURGESS OPTIPOZZ® | Burgess Pigment Company | BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS THERMOGLACE H | Burgess Pigment Company | BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...view more BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. view less | |
| nolax A21.2007 | nolax AG (Vanora) | nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 h...view more nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2007-S | nolax AG (Vanora) | nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007...view more nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007-S has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 | nolax AG (Vanora) | nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a meltin...view more nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 S | nolax AG (Vanora) | nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a me...view more nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 | nolax AG (Vanora) | nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a meltin...view more nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 S | nolax AG (Vanora) | nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a me...view more nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2014 PE40 | nolax AG (Vanora) | nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 P...view more nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 PE40 has a melting point of 170 to 190°C, relative density of 1.1 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2015 | nolax AG (Vanora) | nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a ...view more nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2015 S | nolax AG (Vanora) | nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S ha...view more nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2026 | nolax AG (Vanora) | nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A2...view more nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2026 has a melting point of 60 to 75°C, relative density of 1.0 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2294 | nolax AG (Vanora) | nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.22...view more nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2294 has a melting point of 125 to 135°C, relative density of 0.92 to 0.95 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2294 S | nolax AG (Vanora) | nolax A21.2294-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21....view more nolax A21.2294-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2294-S has a melting point of 125 to 135°C, relative density of 0.92 to 0.95 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A22.2235 | nolax AG (Vanora) | nolax A22.2235 is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bondin...view more nolax A22.2235 is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2235 has a melting point of 120 to 145°C, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A22.2235 S | nolax AG (Vanora) | nolax A22.2235-S is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bond...view more nolax A22.2235-S is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2235-S has a melting point of 120 to 145°C, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax C35.3030 | nolax AG (Vanora) | nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, p...view more nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, polyethylene, paper, and coating to coating. nolax C35.3030 can be applied by roll coating or air knife methods, has a density of approximately 1.0 g/cm³, a viscosity of 200 to 1000 mPa•s at 20°C, a pH value of 7.5 ± 1, and a particle size of approximately 250 nm. view less | |
| nolax M11.185 | nolax AG (Vanora) | nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin c...view more nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. view less | |
| nolax M11.230 | nolax AG (Vanora) | nolax M11.230 is a solid, cloudy and somewhat yellowish in color, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are ...view more nolax M11.230 is a solid, cloudy and somewhat yellowish in color, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. nolax M11.230 has a flash point greater than 250 °C, a viscosity of 12700 mPa•s at 160°C, and a melting point of ~108 °C. view less | |
| nolax M11.342 | nolax AG (Vanora) | nolax M11.342 is a solid yellow colored, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. T...view more nolax M11.342 is a solid yellow colored, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. nolax M11.342 has a flash point greater than 250 °C, a viscosity of 13500 mPa•s at 160°C, and a softening point of 100 °C. view less | |
| nolax M14.1070 | nolax AG (Vanora) | nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor an...view more nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor and high MVTR. Depending on the viscosity, the adhesive can be processed on slot die, screen printing, and roller coating equipment. Tests for dermatological harmless approval must be checked, for each application. nolax M14.1070 has a flash point greater than 150 °C and a viscosity of 63000 mPa•s at 130°C. view less | |
| nolax S21.2018 PE40 | nolax AG (Vanora) | nolax S21.2018 PE40 is a sheet of slightly opaque colored thermoplastic adhesive film based on polyurethanes and can be processed with all established lamination, calendaring, and bonding techniques, except for high frequency welding. S21.2018 PE40 has a ...view more nolax S21.2018 PE40 is a sheet of slightly opaque colored thermoplastic adhesive film based on polyurethanes and can be processed with all established lamination, calendaring, and bonding techniques, except for high frequency welding. S21.2018 PE40 has a melting point of 65 to 85°C, relative density of 1.16 g/cm³, is insoluble in water, and is not readily biodegradable. view less | |
| nolax S22.2202 | nolax AG (Vanora) | nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well...view more nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well as technical textiles. Adheres on one side to metals and polyolefinic substrates (PE, EVA, EPDM), and on the other side to painted sheet material, glass, PC, PVC, PU, ABS, PA, and more. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2202 has a melting point of 100 to 130°C, relative density of ~1.0 g/cm³, is insoluble in water, and not readily biodegradable. view less | |
| nolax S22.2272 | nolax AG (Vanora) | nolax S22.2272 is a sheet of black colored thermoplastic adhesive film based on modified polyolefines that is used for the lamination of ballistic fabrics. It has a melting point of 120 to 130°C, relative density of 0.93 g/cm³, and not readily biodegradab...view more nolax S22.2272 is a sheet of black colored thermoplastic adhesive film based on modified polyolefines that is used for the lamination of ballistic fabrics. It has a melting point of 120 to 130°C, relative density of 0.93 g/cm³, and not readily biodegradable. view less |
