| nolax A21.2007 | nolax AG (Vanora) | nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 h...view more nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2007-S | nolax AG (Vanora) | nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007...view more nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007-S has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 | nolax AG (Vanora) | nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a meltin...view more nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 S | nolax AG (Vanora) | nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a me...view more nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 | nolax AG (Vanora) | nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a meltin...view more nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 S | nolax AG (Vanora) | nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a me...view more nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2014 PE40 | nolax AG (Vanora) | nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 P...view more nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 PE40 has a melting point of 170 to 190°C, relative density of 1.1 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2015 | nolax AG (Vanora) | nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a ...view more nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2015 S | nolax AG (Vanora) | nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S ha...view more nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2026 | nolax AG (Vanora) | nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A2...view more nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2026 has a melting point of 60 to 75°C, relative density of 1.0 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2294 | nolax AG (Vanora) | nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.22...view more nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2294 has a melting point of 125 to 135°C, relative density of 0.92 to 0.95 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2294 S | nolax AG (Vanora) | nolax A21.2294-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21....view more nolax A21.2294-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2294-S has a melting point of 125 to 135°C, relative density of 0.92 to 0.95 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A22.2235 | nolax AG (Vanora) | nolax A22.2235 is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bondin...view more nolax A22.2235 is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2235 has a melting point of 120 to 145°C, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A22.2235 S | nolax AG (Vanora) | nolax A22.2235-S is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bond...view more nolax A22.2235-S is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2235-S has a melting point of 120 to 145°C, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax C35.3030 | nolax AG (Vanora) | nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, p...view more nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, polyethylene, paper, and coating to coating. nolax C35.3030 can be applied by roll coating or air knife methods, has a density of approximately 1.0 g/cm³, a viscosity of 200 to 1000 mPa•s at 20°C, a pH value of 7.5 ± 1, and a particle size of approximately 250 nm. view less | |
| nolax M11.185 | nolax AG (Vanora) | nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin c...view more nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. view less | |
| nolax M11.230 | nolax AG (Vanora) | nolax M11.230 is a solid, cloudy and somewhat yellowish in color, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are ...view more nolax M11.230 is a solid, cloudy and somewhat yellowish in color, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. nolax M11.230 has a flash point greater than 250 °C, a viscosity of 12700 mPa•s at 160°C, and a melting point of ~108 °C. view less | |
| nolax M11.342 | nolax AG (Vanora) | nolax M11.342 is a solid yellow colored, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. T...view more nolax M11.342 is a solid yellow colored, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. nolax M11.342 has a flash point greater than 250 °C, a viscosity of 13500 mPa•s at 160°C, and a softening point of 100 °C. view less | |
| nolax M14.1070 | nolax AG (Vanora) | nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor an...view more nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor and high MVTR. Depending on the viscosity, the adhesive can be processed on slot die, screen printing, and roller coating equipment. Tests for dermatological harmless approval must be checked, for each application. nolax M14.1070 has a flash point greater than 150 °C and a viscosity of 63000 mPa•s at 130°C. view less | |
| nolax S21.2018 PE40 | nolax AG (Vanora) | nolax S21.2018 PE40 is a sheet of slightly opaque colored thermoplastic adhesive film based on polyurethanes and can be processed with all established lamination, calendaring, and bonding techniques, except for high frequency welding. S21.2018 PE40 has a ...view more nolax S21.2018 PE40 is a sheet of slightly opaque colored thermoplastic adhesive film based on polyurethanes and can be processed with all established lamination, calendaring, and bonding techniques, except for high frequency welding. S21.2018 PE40 has a melting point of 65 to 85°C, relative density of 1.16 g/cm³, is insoluble in water, and is not readily biodegradable. view less | |
| nolax S22.2202 | nolax AG (Vanora) | nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well...view more nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well as technical textiles. Adheres on one side to metals and polyolefinic substrates (PE, EVA, EPDM), and on the other side to painted sheet material, glass, PC, PVC, PU, ABS, PA, and more. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2202 has a melting point of 100 to 130°C, relative density of ~1.0 g/cm³, is insoluble in water, and not readily biodegradable. view less | |
| nolax S22.2272 | nolax AG (Vanora) | nolax S22.2272 is a sheet of black colored thermoplastic adhesive film based on modified polyolefines that is used for the lamination of ballistic fabrics. It has a melting point of 120 to 130°C, relative density of 0.93 g/cm³, and not readily biodegradab...view more nolax S22.2272 is a sheet of black colored thermoplastic adhesive film based on modified polyolefines that is used for the lamination of ballistic fabrics. It has a melting point of 120 to 130°C, relative density of 0.93 g/cm³, and not readily biodegradable. view less | |
| Quasilan CT 23 | Baxenden Chemicals Ltd. | Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan CT 29 | Baxenden Chemicals Ltd. | Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan RB 1150 | Baxenden Chemicals Ltd. | Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and floori...view more Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and flooring markets. view less | |
| Quasilan RB 1943 | Baxenden Chemicals Ltd. | Quasilan RB 1943, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Quasilan RB 1943 has applications in DIY and flooring markets and 2-K sealants and coatings. | |
| Quasilan RB 1999 | Baxenden Chemicals Ltd. | Quasilan RB 1999, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. This product is mainly used in 2-K sealants and coatings. | |
| Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...view more Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). view less | |
| Trixene SC 7702 | Baxenden Chemicals Ltd. | Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stabili...view more Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7703 | Baxenden Chemicals Ltd. | Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/...view more Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7707 | Baxenden Chemicals Ltd. | Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance ...view more Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7721 | Baxenden Chemicals Ltd. | Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability...view more Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7722 | Baxenden Chemicals Ltd. | Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7725 | Baxenden Chemicals Ltd. | Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7902 | Baxenden Chemicals Ltd. | Trixene SC 7902 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...view more Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. view less | |
| Trixene SC 7907 | Baxenden Chemicals Ltd. | Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...view more Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. view less | |
| Trixene SC 7930 | Baxenden Chemicals Ltd. | Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coat...view more Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coatings. view less | |
| Trixene SC 7931 | Baxenden Chemicals Ltd. | Trixene SC 7931 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. |
