| EPS® 2121 | EPS Materials | EPS® 2121 is an all acrylic latex general purpose pressure sensitive adhesive for removable applications. EPS® 2121 exhibits low peel, moderate tack, and high shear values. | Request Sample |
| EPS® 2128 | EPS Materials | EPS® 2128 is an acrylic emulsion for use in removable pressure sensitive applications. EPS® 2128 exhibits low peel, low tack, and high shear values. | Request Sample |
| EPS® 2224 | EPS Materials | EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It ...view more EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It is also an excellent choice for both clear and pigmented caulk and sealant formulations that meet ASTM C834 specifications. view less | Request Sample |
| EPS® 2559 | EPS Materials | EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydr...view more EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydrophobic properties of EPS® 2559 make it an excellent choice for high performance waterproofing paints on cementitious substrates and it can be used as the binder in tile mastics. view less | Request Sample |
| EPS® 2708 | EPS Materials | EPS® 2708 is an all-acrylic emulsion designed for high alkali applications. It can be used as a polymer admixture for cement-based products, and as a binder/primer for coatings over cementitious substrates. | Request Sample |
| EPS® 9147 | EPS Materials | EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stabilit...view more EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stability should be preformed. This is a permanent coalescent that remains in the paint film and should not be stored in PVC containers or piping for extended periods of time. view less | Request Sample |
| nolax A21.2007 | nolax AG (Vanora) | nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 h...view more nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2007-S | nolax AG (Vanora) | nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007...view more nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007-S has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 | nolax AG (Vanora) | nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a meltin...view more nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 S | nolax AG (Vanora) | nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a me...view more nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 | nolax AG (Vanora) | nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a meltin...view more nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 S | nolax AG (Vanora) | nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a me...view more nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2014 PE40 | nolax AG (Vanora) | nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 P...view more nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 PE40 has a melting point of 170 to 190°C, relative density of 1.1 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2015 | nolax AG (Vanora) | nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a ...view more nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2015 S | nolax AG (Vanora) | nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S ha...view more nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2026 | nolax AG (Vanora) | nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A2...view more nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2026 has a melting point of 60 to 75°C, relative density of 1.0 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2294 | nolax AG (Vanora) | nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.22...view more nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2294 has a melting point of 125 to 135°C, relative density of 0.92 to 0.95 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2294 S | nolax AG (Vanora) | nolax A21.2294-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21....view more nolax A21.2294-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2294-S has a melting point of 125 to 135°C, relative density of 0.92 to 0.95 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A22.2235 | nolax AG (Vanora) | nolax A22.2235 is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bondin...view more nolax A22.2235 is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2235 has a melting point of 120 to 145°C, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A22.2235 S | nolax AG (Vanora) | nolax A22.2235-S is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bond...view more nolax A22.2235-S is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2235-S has a melting point of 120 to 145°C, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax C35.3030 | nolax AG (Vanora) | nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, p...view more nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, polyethylene, paper, and coating to coating. nolax C35.3030 can be applied by roll coating or air knife methods, has a density of approximately 1.0 g/cm³, a viscosity of 200 to 1000 mPa•s at 20°C, a pH value of 7.5 ± 1, and a particle size of approximately 250 nm. view less | |
| nolax M11.185 | nolax AG (Vanora) | nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin c...view more nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. view less | |
| nolax M11.230 | nolax AG (Vanora) | nolax M11.230 is a solid, cloudy and somewhat yellowish in color, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are ...view more nolax M11.230 is a solid, cloudy and somewhat yellowish in color, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. nolax M11.230 has a flash point greater than 250 °C, a viscosity of 12700 mPa•s at 160°C, and a melting point of ~108 °C. view less | |
| nolax M11.342 | nolax AG (Vanora) | nolax M11.342 is a solid yellow colored, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. T...view more nolax M11.342 is a solid yellow colored, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. nolax M11.342 has a flash point greater than 250 °C, a viscosity of 13500 mPa•s at 160°C, and a softening point of 100 °C. view less | |
| nolax M14.1070 | nolax AG (Vanora) | nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor an...view more nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor and high MVTR. Depending on the viscosity, the adhesive can be processed on slot die, screen printing, and roller coating equipment. Tests for dermatological harmless approval must be checked, for each application. nolax M14.1070 has a flash point greater than 150 °C and a viscosity of 63000 mPa•s at 130°C. view less | |
| nolax S21.2018 PE40 | nolax AG (Vanora) | nolax S21.2018 PE40 is a sheet of slightly opaque colored thermoplastic adhesive film based on polyurethanes and can be processed with all established lamination, calendaring, and bonding techniques, except for high frequency welding. S21.2018 PE40 has a ...view more nolax S21.2018 PE40 is a sheet of slightly opaque colored thermoplastic adhesive film based on polyurethanes and can be processed with all established lamination, calendaring, and bonding techniques, except for high frequency welding. S21.2018 PE40 has a melting point of 65 to 85°C, relative density of 1.16 g/cm³, is insoluble in water, and is not readily biodegradable. view less | |
| nolax S22.2202 | nolax AG (Vanora) | nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well...view more nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well as technical textiles. Adheres on one side to metals and polyolefinic substrates (PE, EVA, EPDM), and on the other side to painted sheet material, glass, PC, PVC, PU, ABS, PA, and more. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2202 has a melting point of 100 to 130°C, relative density of ~1.0 g/cm³, is insoluble in water, and not readily biodegradable. view less | |
| nolax S22.2272 | nolax AG (Vanora) | nolax S22.2272 is a sheet of black colored thermoplastic adhesive film based on modified polyolefines that is used for the lamination of ballistic fabrics. It has a melting point of 120 to 130°C, relative density of 0.93 g/cm³, and not readily biodegradab...view more nolax S22.2272 is a sheet of black colored thermoplastic adhesive film based on modified polyolefines that is used for the lamination of ballistic fabrics. It has a melting point of 120 to 130°C, relative density of 0.93 g/cm³, and not readily biodegradable. view less |
