| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 2-Ethylhexanol | Perstorp | 2-Ethylhexanol is a clear, colorless liquid acrylic monomer. This product provides flexibility, water resistance and exterior durability in decorative and industrial paint applications. | |
| 2-Propylheptanol | Perstorp | 2-Propylheptanol is a branched C10 fatty alcohol used as raw material for lubricants and acrylates in adhesives applications. | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...view more BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. view less | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...view more Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. view less | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...view more Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. view less | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. view less | |
| Flexipel S-11WS | Innovative Chemical Technologies, Inc. | Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in ...view more Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in water and has a boiling point of approximately 320 degrees Fahrenheit. view less | |
| Flexipel S-22WS | Innovative Chemical Technologies, Inc. | Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This prod...view more Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This product is insoluble in water and has a mild odor. Its boiling point is approximately 320 degrees Fahrenheit, and contains 22-23% solids. view less | |
| Flexisperse™ 225 | Innovative Chemical Technologies, Inc. | Flexisperse™ 225 is a methacrylic acid polymer (9000 M.Wt.) which is a highly effective dispersant, anti-scalant, deflocculent, and rheology modifier. Produces stable dispersions and suspensions at high concentrations, with lower viscosities. | |
| n-Butanol | Perstorp | n-Butanol is a clear, colorless liquid acrylic monomer. This product provides flexibility and solubility and is used as direct solvent in coatings resins and dyes. | |
| NX 795 | Perstorp | NX 795 is a clear, colorless liquid ester alcohol used as a coalescing agent for aqueous dispersions. This product is used in decorative and industrial coatings. | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...view more Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. view less | |
| Polyol TD | Perstorp | Polyol TD is a mixed polyol with an average functionality of 1.8. It is a clear, low-color liquid that can be used as a propylene glycol replacement or as additive carrier in paints, coatings, and adhesive applications. | |
| Thetawet™ FS-8000 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous s...view more Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. Its melting point is below 55 degrees Celsius. view less | |
| Thetawet™ FS-8020DB | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial ...view more Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial or architectural paints and coatings. This product is soluble in water and has a pH of 5.5 +/- 1.0 in a 5% aqueous solution. view less | |
| Thetawet™ FS-8020EB | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This produ...view more Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This product is soluble in water and has low-foaming properties. It has a pH of 4.5 +/- 1.5 in a 5% aqueous solution. view less | |
| Thetawet™ FS-8050 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1...view more Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1.0 in a 1% aqueous solution, and a boiling point of approximately 100 degrees Celsius. view less | |
| Thetawet™ FS-8100 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution...view more Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a melting point under 55 degrees Celsius. view less | |
| Thetawet™ FS-8150 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aq...view more Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a boiling point of approximately 100 degrees Celsius and is designed for use in VOC-sensitive systems. view less | |
| Thetawet™ FS-8200 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contai...view more Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contains 100% active ingredients. It has a pH of 2.5 to 4.0, and a melting point between 55 and 65 degrees Celsius. view less | |
| Thetawet™ FS-8250 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in w...view more Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in water and contains 28% active ingredients. It has a pH of 9.0 +/- 1.0 and a boiling point of 100 degrees Celsius. view less | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...view more Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...view more Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100...view more Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% re...view more Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100%...view more Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% re...view more Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less |
