| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 2-Ethylhexanol | Perstorp | 2-Ethylhexanol is a clear, colorless liquid acrylic monomer. This product provides flexibility, water resistance and exterior durability in decorative and industrial paint applications. | |
| 2-Propylheptanol | Perstorp | 2-Propylheptanol is a branched C10 fatty alcohol used as raw material for lubricants and acrylates in adhesives applications. | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...view more BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. view less | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...view more Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. view less | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...view more Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. view less | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. view less | |
| n-Butanol | Perstorp | n-Butanol is a clear, colorless liquid acrylic monomer. This product provides flexibility and solubility and is used as direct solvent in coatings resins and dyes. | |
| NX 795 | Perstorp | NX 795 is a clear, colorless liquid ester alcohol used as a coalescing agent for aqueous dispersions. This product is used in decorative and industrial coatings. | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...view more Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. view less | |
| Polyol TD | Perstorp | Polyol TD is a mixed polyol with an average functionality of 1.8. It is a clear, low-color liquid that can be used as a propylene glycol replacement or as additive carrier in paints, coatings, and adhesive applications. | |
| Resinate® A0351-12 Green Strength Performance Polyol for RHMA | Resinate Materials Group, Inc. | Resinate® A0351-12 is a developmental solid crystalline polyester polyol with excellent green strength, and excellent water and chemical resistance. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are...view more Resinate® A0351-12 is a developmental solid crystalline polyester polyol with excellent green strength, and excellent water and chemical resistance. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are key considerations. view less | |
| Resinate® A0352-73 High-Performance Polyol for RHMA | Resinate Materials Group, Inc. | Resinate® A0352-73 is a developmental solid crystalline polyester polyol made with 73.2% renewable content. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are key considerations. Strong crystalline a...view more Resinate® A0352-73 is a developmental solid crystalline polyester polyol made with 73.2% renewable content. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are key considerations. Strong crystalline and amorphous phase, good adhesion on high and medium surface energy plastics, excellent water and chemical resistance. view less | |
| Resinate® A0353-75 Multi-Purpose Polyol for RHMA | Resinate Materials Group, Inc. | Resinate® A0353-75 is a developmental solid semi-crystalline polyester polyol made with 74.5% recycled and renewable content. It is ideal for demanding reactive hot melt adhesive applications on a variety of plastic substrates. Balanced crystalline and am...view more Resinate® A0353-75 is a developmental solid semi-crystalline polyester polyol made with 74.5% recycled and renewable content. It is ideal for demanding reactive hot melt adhesive applications on a variety of plastic substrates. Balanced crystalline and amorphous phase, good adhesion on a variety of plastic surfaces, excellent water and chemical resistance. view less | |
| Resinate® A2551-100 Polyol for Solventless 2k Adhesives | Resinate Materials Group, Inc. | Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. ...view more Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. Long pot life, low viscosity, excellent water and chemical resistance. view less | |
| Resinate® A2552-100 High Recycled Content Polyol for Solventless Adhesives | Resinate Materials Group, Inc. | Resinate® A2552-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2K or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. ...view more Resinate® A2552-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2K or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. Low viscosity, good adhesion, high recycled content, good chemical resistance. view less | |
| Resinate® A2553-76 Multi-Purpose Polyol for Solventless Adhesives | Resinate Materials Group, Inc. | Resinate® A2553-76 is a developmental polyester polyol made with 76.1% recycled and renewable content. It is ideal for solventless 2K or moisture cure adhesive applications where superior adhesion performance on a variety of substrates is required. Excell...view more Resinate® A2553-76 is a developmental polyester polyol made with 76.1% recycled and renewable content. It is ideal for solventless 2K or moisture cure adhesive applications where superior adhesion performance on a variety of substrates is required. Excellent adhesion performance on a variety of surfaces, low viscosity, excellent water and chemical resistance. view less | |
| Resinate® C1051-60 (BA80) Polyol for Direct to Metal Coatings | Resinate Materials Group, Inc. | Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, ...view more Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, 60% recycled and renewable content. view less | |
| Resinate® C1181-100 High Flexibility Modifying Polyol | Resinate Materials Group, Inc. | Resinate® C1181-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key conside...view more Resinate® C1181-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Ideal balance of hardness and flexibility, good water resistance, good chemical resistance. view less | |
| Resinate® C1182-100 Mid-Flexibility Modifying Polyol | Resinate Materials Group, Inc. | Resinate® C1182-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key conside...view more Resinate® C1182-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Good mechanical properties with flexibility in polyurethane products, good water resistance, good chemical resistance. view less | |
| Resinate® C2051-50 Concrete Coating Polyol | Resinate Materials Group, Inc. | Resinate® C2051-50 is a low viscosity high-performance polyester polyol for 2K polyurethane top coats. This polyol is designed for demanding flooring and concrete coating applications where a high degree of flexibility and hardness with direct/indirect im...view more Resinate® C2051-50 is a low viscosity high-performance polyester polyol for 2K polyurethane top coats. This polyol is designed for demanding flooring and concrete coating applications where a high degree of flexibility and hardness with direct/indirect impact resistance is required. view less | |
| Resinate® C2441 Corrosion Control Polyol | Resinate Materials Group, Inc. | Resinate® C2441 is a reactive diluent useful as a performance blend polyol for industrial coatings. It has diol functionality, has very low color, is a flowable liquid at ambient temperature, and when blended with suitable resin systems can provide signif...view more Resinate® C2441 is a reactive diluent useful as a performance blend polyol for industrial coatings. It has diol functionality, has very low color, is a flowable liquid at ambient temperature, and when blended with suitable resin systems can provide significant enhancement of several critical properties for metal protection. Excellent corrosion protection, good balance of hardness and flexibility, good chemical and stain resistance, very good adhesion. view less | |
| Resinate® C2901-04 (PMA80) | Resinate Materials Group, Inc. | Resinate® C2901-04 (PMA80) is a branched, high-performance polyester polyol for 2K urethane or 1K bake enamel protection. It is supplied at 80% solids in Propylene glycol monomethyl ether acetate. This product is designed for demanding direct to metal app...view more Resinate® C2901-04 (PMA80) is a branched, high-performance polyester polyol for 2K urethane or 1K bake enamel protection. It is supplied at 80% solids in Propylene glycol monomethyl ether acetate. This product is designed for demanding direct to metal applications where weather stability and versatile performance systems are required. view less | |
| Resinate® C3851-100 Low Viscosity Building Block Polyol | Resinate Materials Group, Inc. | Resinate® C3851-100 is an aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Good...view more Resinate® C3851-100 is an aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Good balance of hardness and flexibility, good water resistance, good chemical resistance. view less | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...view more Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...view more Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100...view more Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% re...view more Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100%...view more Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% re...view more Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less |
