| ACRESIN® A 204 UV | BASF Dispersions & Resins | ACRESIN A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, wh...view more ACRESIN A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, which require coat weights up to 80 g/m2 (3 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. view less | |
| ACRESIN® A 250 UV | BASF Dispersions & Resins | ACRESIN A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require c...view more ACRESIN A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 180 g/m2 (6.7 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. view less | |
| ACRESIN® A 260 UV | BASF Dispersions & Resins | ACRESIN A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require c...view more ACRESIN A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 100 g/m2 (3.8 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. view less | |
| ACRESIN® UV 3532 | BASF Dispersions & Resins | ACRESIN UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weights...view more ACRESIN UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weights up to ~40 g/m2 (1.5 mils). By virtue of its low glass transition temperature, it may also be used as a freezer grade adhesive in various applications. view less | |
| ACRONAL® 3630 | BASF Dispersions & Resins | ACRONAL 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, ta...view more ACRONAL 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, tack and cohesion, as well as excellent water resistance. Product has also been found to be suitable for numerous demanding roll label type applications. view less | |
| ACRONAL® 3633 | BASF Dispersions & Resins | ACRONAL 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non-...view more ACRONAL 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non-APEO. view less | |
| ACRONAL® 3636 X | BASF Dispersions & Resins | ACRONAL 3636 X is an APEO-free, aqueous adhesive dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® 4 D | BASF Dispersions & Resins | ACRONAL 4 D is a dispersion of a polyacrylic acid butyl ester in water used to manufacture pressure-sensitive adhesives for self-adhesives articles. | |
| ACRONAL® 4032 X | BASF Dispersions & Resins | ACRONAL 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels. | |
| ACRONAL® 4034 | BASF Dispersions & Resins | ACRONAL 4034 is a non-APEO containing acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesives labels and tapes. | |
| ACRONAL® 4053 X | BASF Dispersions & Resins | ACRONAL 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than ACRONAL DS 3502 for easier handling and blending. | |
| ACRONAL® 4510 | BASF Dispersions & Resins | ACRONAL 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. ACRONAL 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. ACRONAL 4510 also displ...view more ACRONAL 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. ACRONAL 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. ACRONAL 4510 also displays high water vapor permeability and low water absorption, which provides excellent long-term performance. The self-crosslinking mechanism of ACRONAL 4510 imparts excellent dirt pick-up resistance and film strength while maintaining film elasticity at very low temperatures and varying film thicknesses. view less | |
| ACRONAL® A 110 | BASF Dispersions & Resins | ACRONAL A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removab...view more ACRONAL A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. view less | |
| ACRONAL® A 145 | BASF Dispersions & Resins | ACRONAL A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasti...view more ACRONAL A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. view less | |
| ACRONAL® A 220 NA | BASF Dispersions & Resins | ACRONAL A 220 NA is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. ACRONAL A 220 NA is a versatile acrylic polymer. Excellent clarity and non-yellow...view more ACRONAL A 220 NA is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. ACRONAL A 220 NA is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. view less | |
| ACRONAL® A 240 NA | BASF Dispersions & Resins | ACRONAL A 240 NA is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and ta...view more ACRONAL A 240 NA is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. view less | |
| ACRONAL® A 245 | BASF Dispersions & Resins | ACRONAL A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasti...view more ACRONAL A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. view less | |
| ACRONAL® DS 3502 | BASF Dispersions & Resins | ACRONAL DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. ACRONAL DS...view more ACRONAL DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. ACRONAL DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. ACRONAL DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. view less | |
| ACRONAL® DS 3570 NA | BASF Dispersions & Resins | ACRONAL DS 3570 NA is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sens...view more ACRONAL DS 3570 NA is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with ACRONAL DS 3570 NA exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. view less | |
| ACRONAL® DS 3598 NA | BASF Dispersions & Resins | ACRONAL DS 3598 NA is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowin...view more ACRONAL DS 3598 NA is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. view less | |
| ACRONAL® LA 449 S | BASF Dispersions & Resins | ACRONAL LA 449 S is an aqueous polymer dispersion for the manufacture of pressure sensitive adhesives for self-adhesive articles. | |
| ACRONAL® N 284 NA | BASF Dispersions & Resins | ACRONAL N 284 NA is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion...view more ACRONAL N 284 NA is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain ACRONAL N 284 NA also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. view less | |
| ACRONAL® NX 2160 | BASF Dispersions & Resins | ACRONAL NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good co...view more ACRONAL NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain ACRONAL NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. view less | |
| ACRONAL® NX 2278 X | BASF Dispersions & Resins | ACRONAL NX 2278 X is an APEO-free, self-cross linking, aqueous adhesive dispersion used for the manufacture of pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® NX 4021 | BASF Dispersions & Resins | ACRONAL NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability. | |
| ACRONAL® NX 4569 | BASF Dispersions & Resins | ACRONAL NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suit...view more ACRONAL NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. view less | |
| ACRONAL® NX 5818 | BASF Dispersions & Resins | ACRONAL NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient ...view more ACRONAL NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. ACRONAL NX 5818 has good strength in the presence of oil or water. ACRONAL NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). view less | |
| ACRONAL® S 504 NA | BASF Dispersions & Resins | ACRONAL S 504 NA is a versatile dispersion used as the base polymer for paper strengthening via saturation, and also finds utility as a binder in sound damping and adhesives applications. | |
| ACRONAL® V 210 NA | BASF Dispersions & Resins | ACRONAL V 210 NA is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia. | |
| ACRONAL® V 275 NA | BASF Dispersions & Resins | ACRONAL V 275 NA is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free. | |
| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...view more Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. view less | |
| BASONAT® F 200 WD | BASF Dispersions & Resins | BASONAT F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtur...view more BASONAT F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of BASONAT F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. view less | |
| BASONAT® LR 9056 | BASF Dispersions & Resins | BASONAT LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicatio...view more BASONAT LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. view less | |
| BUTOFAN® NS 144 | BASF Dispersions & Resins | BUTOFAN NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to ...view more BUTOFAN NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. view less | |
| BUTOFAN® NS 166 | BASF Dispersions & Resins | BUTOFAN NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be...view more BUTOFAN NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. view less | |
| BUTOFAN® NS 209 | BASF Dispersions & Resins | BUTOFAN NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives ...view more BUTOFAN NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. view less | |
| BUTOFAN® NS 222 | BASF Dispersions & Resins | BUTOFAN NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO. | |
| IRGASTAB® UV 22 | BASF Dispersions & Resins | IRGASTAB UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulation...view more IRGASTAB UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. view less | |
| JONCRYL® 1685-A | BASF Dispersions & Resins | JONCRYL 1685-A is designed for excellent heat resistance in water-based overprint varnishes and inks providing excellent adhesion to a variety of substrates while also providing good block resistance. | |
| JONCRYL® U 4501 | BASF Dispersions & Resins | JONCRYL U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Add...view more JONCRYL U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Additionally, the low minimum film forming temperature and low solvent demand allows formulators to achieve low VOC coatings. With its broad acrylic dispersion compatibility, JONCRYL U 4501 can be easily blended with WB acrylic resins such as JONCRYL 9530-A to achieve higher levels of scratch, mar, and abrasion resistance, without many of the potential drawbacks of PUD blends. view less | |
| LUPHEN® D 207 E | BASF Dispersions & Resins | LUPHEN D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that LUPHEN D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack l...view more LUPHEN D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that LUPHEN D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack life. view less | |
| LUPHEN® D 259 U | BASF Dispersions & Resins | LUPHEN D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition ...view more LUPHEN D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition of a few percent of a water dispersible polyisocyanate to LUPHEN D 259 U increases its resistance to heat and moisture. The potlife of the adhesive depends on the reactivity of the polyisocyanate used, and this has to be determined in trials. view less | |
| Octocure 462 | Tiarco Chemical | Octocure 462 is an aqueous zinc oxide dispersion readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing SBR and natural latex rubber. | |
| Octocure 487 | Tiarco Chemical | Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product m...view more Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product may also be used at lower concentrations as a slow precure accelerator in natural latex. view less | |
| Octocure 530 | Tiarco Chemical | Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accel...view more Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accelerator in SBR, neoprene, and nitrile latices. This product is typically used as an activator for MBT and other thiazole accelerators, or in conjunction with dithiocarbamates or thiocarbanilides. view less | |
| Octocure 551 | Tiarco Chemical | Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...view more Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. view less | |
| Octocure 573 | Tiarco Chemical | Octocure 573 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure 803 | Tiarco Chemical | Octocure 803 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure ZBZ-42 | Tiarco Chemical | Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary acc...view more Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary accelerators such as ZMBT. Octocure ZBZ-42 is ideal for vulcanization processes where the formation of volatile nitrosoamines needs to be reduced. view less | |
| Octocure ZDB-100 | Tiarco Chemical | Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...view more Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. view less | |
| Octocure ZDB-50 | Tiarco Chemical | Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus...view more Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus. view less | |
| Octocure ZDB-50 CF | Tiarco Chemical | Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...view more Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. view less | |
| Octocure ZDE-50 | Tiarco Chemical | Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts z...view more Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts zinc mercaptobenzothiazole. view less | |
| Octocure ZDIB-50 | Tiarco Chemical | Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...view more Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. view less | |
| Octocure ZDM-50 | Tiarco Chemical | Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...view more Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. view less | |
| Octocure ZMBT-50 | Tiarco Chemical | Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This...view more Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. view less | |
| Octocure ZMBT-50 CF | Tiarco Chemical | Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithioca...view more Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. view less | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...view more Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. view less | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...view more Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. view less | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...view more Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. view less | |
| Octolite 497 | Tiarco Chemical | Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...view more Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. view less | |
| Octolite 544 CF | Tiarco Chemical | Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...view more Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. view less | |
| Octolite 640 | Tiarco Chemical | Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...view more Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. view less | |
| Octolite 668 | Tiarco Chemical | Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...view more Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. view less | |
| Octolite 809 | Tiarco Chemical | Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...view more Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. view less | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...view more Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. view less | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...view more Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. view less | |
| Octosol 730 | Tiarco Chemical | Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...view more Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. view less | |
| Octotint 790 | Tiarco Chemical | Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aq...view more Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations where its characteristic color would be desired. view less | |
| STYROFAN® NX 6690 X | BASF Dispersions & Resins | STYROFAN NX 6690 X is a carboxylated styrene/butadiene dispersion. It is a low odor, ammonia free dispersion that is used in the formulation of laminating adhesives. It provides toughness and water resistance in the finished formulation. This product is a...view more STYROFAN NX 6690 X is a carboxylated styrene/butadiene dispersion. It is a low odor, ammonia free dispersion that is used in the formulation of laminating adhesives. It provides toughness and water resistance in the finished formulation. This product is a low odor and an ammonia free dispersion. view less | |
| STYRONAL® ND 430 | BASF Dispersions & Resins | STYRONAL ND 430 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer used in the formulation of industrial adhesives for combining and laminating. It has outstanding mechanical and chemical stability. This product displays excellent adhe...view more STYRONAL ND 430 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer used in the formulation of industrial adhesives for combining and laminating. It has outstanding mechanical and chemical stability. This product displays excellent adhesion and serves as the base for foil to kraft wet laminating adhesives in conjunction with casein. view less | |
| STYRONAL® ND 811 | BASF Dispersions & Resins | STYRONAL ND 811 is a very stiff carboxylated styene/butadiene dispersion used as a binder for nonwoven and coating applications. It is a mechanically and chemically stable modifier in laminating adhesive formulations. It provides stiffness and toughness. ...view more STYRONAL ND 811 is a very stiff carboxylated styene/butadiene dispersion used as a binder for nonwoven and coating applications. It is a mechanically and chemically stable modifier in laminating adhesive formulations. It provides stiffness and toughness. STYRONAL ND 811 may also be used as a glossing additive for both paper and paperboard coatings. view less | |
| STYRONAL® NX 4222 X | BASF Dispersions & Resins | STYRONAL NX 4222 X is a carboxylated styrene/butadiene dispersion. It is recommended to add a preservative to adhesives and coating materials that contain STYRONAL NX 4222 X to protect them from microbial attack, particularly if their pH lies in the neutr...view more STYRONAL NX 4222 X is a carboxylated styrene/butadiene dispersion. It is recommended to add a preservative to adhesives and coating materials that contain STYRONAL NX 4222 X to protect them from microbial attack, particularly if their pH lies in the neutral range. The suitability of such additives must be verified and monitored in trials. view less | |
| T-Gum 104 | Tiarco Chemical | T-Gum 104 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications - including carpet backing, latex foam, adhesives, emulsions, textile coatings, non-wovens, and dispersions. This product may be used to thicke...view more T-Gum 104 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications - including carpet backing, latex foam, adhesives, emulsions, textile coatings, non-wovens, and dispersions. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, neoprene, acrylic, vinyl acetate, and ethylene-vinyl acetate latex compounds. view less | |
| TINUVIN® 479-DW | BASF Dispersions & Resins | TINUVIN 479-DW is an aqueous triazine-based UV absorber dispersion for coatings, overprint varnishes, adhesives and sealants. It has an extremely high extinction coefficient, high long-term performance, high thermal stability, and is non-migrating. It was...view more TINUVIN 479-DW is an aqueous triazine-based UV absorber dispersion for coatings, overprint varnishes, adhesives and sealants. It has an extremely high extinction coefficient, high long-term performance, high thermal stability, and is non-migrating. It was designed to meet the highest performance and durability requirements, particularly in thin films or at reduced film thickness in water-based transportation and industrial applications including energy curable systems (UV, EB). Due to its extremely high extinction, TINUVIN 479-DW is especially suitable for all water-based coatings applied at reduced film thickness or for thin film applications exposed to high baking temperatures and/or to extreme environmental conditions. view less | |
| TINUVIN® 622 SF | BASF Dispersions & Resins | TINUVIN 622 SF is a solid oligomeric low basic hindered amine light stabilizer (HALS) developed for coating, adhesive and sealant applications. It offers superior thermal stability and good long term performance, as well as non-migrating and antioxidant p...view more TINUVIN 622 SF is a solid oligomeric low basic hindered amine light stabilizer (HALS) developed for coating, adhesive and sealant applications. It offers superior thermal stability and good long term performance, as well as non-migrating and antioxidant properties. This product is designed to meet high performance and durability requirements of all powder coatings as well as adhesive and sealant applications. It protects coatings from surface defects such as gloss reduction, cracking and chalking, and ensures the retention of mechanical properties. In addition, it shows thermally stabilizing and antioxidant properties. view less | |
| TINUVIN® P | BASF Dispersions & Resins | TINUVIN P is a UV absorber of the hydroxyphenyl-benzotriazole class that imparts good light stability to a wide variety of polymers and organic substrates. It provides UV protection in a wide variety of polymers including styrene homo- and copolymers, eng...view more TINUVIN P is a UV absorber of the hydroxyphenyl-benzotriazole class that imparts good light stability to a wide variety of polymers and organic substrates. It provides UV protection in a wide variety of polymers including styrene homo- and copolymers, engineering plastics such as polyesters and acrylic resins, polyvinyl chloride, and other halogen containing polymers and copolymers (e.g. vinylidenes), acetals and cellulose esters. Elastomers, adhesives, polycarbonate blends, polyurethanes, and epoxy materials also benefit from the use of TINUVIN P. view less |
