| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...view more Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. view less | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...view more DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). view less | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...view more DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...view more DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. view less | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. view less | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...view more DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. view less | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...view more DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. view less | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...view more DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). view less | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...view more DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. view less | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...view more DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...view more DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| Octocure 462 | Tiarco Chemical | Octocure 462 is an aqueous zinc oxide dispersion readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing SBR and natural latex rubber. | |
| Octocure 487 | Tiarco Chemical | Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product m...view more Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product may also be used at lower concentrations as a slow precure accelerator in natural latex. view less | |
| Octocure 530 | Tiarco Chemical | Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accel...view more Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accelerator in SBR, neoprene, and nitrile latices. This product is typically used as an activator for MBT and other thiazole accelerators, or in conjunction with dithiocarbamates or thiocarbanilides. view less | |
| Octocure 551 | Tiarco Chemical | Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...view more Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. view less | |
| Octocure 573 | Tiarco Chemical | Octocure 573 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure 803 | Tiarco Chemical | Octocure 803 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure ZBZ-42 | Tiarco Chemical | Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary acc...view more Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary accelerators such as ZMBT. Octocure ZBZ-42 is ideal for vulcanization processes where the formation of volatile nitrosoamines needs to be reduced. view less | |
| Octocure ZDB-100 | Tiarco Chemical | Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...view more Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. view less | |
| Octocure ZDB-50 | Tiarco Chemical | Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus...view more Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus. view less | |
| Octocure ZDB-50 CF | Tiarco Chemical | Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...view more Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. view less | |
| Octocure ZDE-50 | Tiarco Chemical | Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts z...view more Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts zinc mercaptobenzothiazole. view less | |
| Octocure ZDIB-50 | Tiarco Chemical | Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...view more Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. view less | |
| Octocure ZDM-50 | Tiarco Chemical | Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...view more Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. view less | |
| Octocure ZMBT-50 | Tiarco Chemical | Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This...view more Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. view less | |
| Octocure ZMBT-50 CF | Tiarco Chemical | Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithioca...view more Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. view less | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...view more Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. view less | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...view more Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. view less | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...view more Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. view less | |
| Octolite 497 | Tiarco Chemical | Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...view more Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. view less | |
| Octolite 544 CF | Tiarco Chemical | Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...view more Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. view less | |
| Octolite 640 | Tiarco Chemical | Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...view more Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. view less | |
| Octolite 668 | Tiarco Chemical | Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...view more Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. view less | |
| Octolite 809 | Tiarco Chemical | Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...view more Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. view less | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...view more Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. view less | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...view more Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. view less | |
| Octosol 730 | Tiarco Chemical | Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...view more Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. view less | |
| Octotint 790 | Tiarco Chemical | Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aq...view more Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations where its characteristic color would be desired. view less | |
| POLYVEST® 110 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® 110 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 110 is a highly reactive binder characterized by: high chemical resista...view more POLYVEST® 110 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 110 is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. POLYVEST® 110 is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. view less | Request Sample |
| POLYVEST® 130 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® 130 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 130 is a highly reactive binder characterized by: high chemical resista...view more POLYVEST® 130 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 130 is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. POLYVEST® 130 is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, release agents for polyurethane foams, cell opener for polyurethane foams, defoamers, modifier of resin systems, modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. view less | Request Sample |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...view more POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 110 Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO 110 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and others, and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 110 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, a modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. view less | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...view more POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. view less | Request Sample |
| POLYVEST® eCO EP MA 100 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and acce...view more POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO EP MA 100 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO EP MA 100 Bio brings the same well-known performance but has reduced carbon emissions. view less | Request Sample |
| POLYVEST® eCO HT Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a ...view more POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® eCO HT Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO HT Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO HT Bio exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics, and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® eCO HT Bio is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber-based sealants and recycled rubber compounds, polymer modification, and many more. view less | Request Sample |
| POLYVEST® eCO MA 75 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessibl...view more POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO MA 75 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO MA 75 Bio brings the same well-known performance but has reduced carbon emissions. The polar, hydrophobic hydrocarbon resin POLYVEST® eCO MA 75 Bio is a highly reactive binder featuring characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers, good compatibility with long-oil alkyd resins, rosin resins and zinc resonates. POLYVEST® eCO MA 75 Bio is used in adhesives and sealants compositions, electrical insulations, and potting compounds (2pack systems), polymeric chalk activator in EPDM-compounds, modifier in carbon black filled EPDM-compounds, modifier in silica filled rubber compounds, modifier in rubber compounds for car tires, modifier in silicone sealants, and many more. view less | Request Sample |
| POLYVEST® EP MA 100 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible fo...view more POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. view less | Request Sample |
| POLYVEST® HT | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive ...view more POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® HT exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® HT is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber based sealants and recycled rubber compounds, polymer modification, and many more. view less | Request Sample |
| POLYVEST® MA 75 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® MA 75 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for va...view more POLYVEST® MA 75 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. The polar, hydrophobic hydrocarbon resin POLYVEST® MA 75 is a highly reactive binder featuring characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers, good compatibility with long-oil alkyd resins, rosin resins and zinc resonates. POLYVEST® MA 75 is used in adhesives and sealants compositions, electrical insulations and potting compounds (2pack systems), polymeric chalk activator in EPDM-compounds, modifier in carbon black filled EPDM-compounds, modifier in silica filled rubber compounds, modifier in rubber compounds for car tires, modifier in silicone sealants, and many more. view less | Request Sample |
| SARAWAX SX 105 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic proc...view more SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic processing. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. view less | Request Sample |
| SARAWAX SX 80 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecu...view more SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecular weight distribution. Applications include amongst others Hot melts especially for food packaging. The product is compliant to FDA and EU 10/2011 without specific migration limit. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. view less | Request Sample |
| T-Gum 104 | Tiarco Chemical | T-Gum 104 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications - including carpet backing, latex foam, adhesives, emulsions, textile coatings, non-wovens, and dispersions. This product may be used to thicke...view more T-Gum 104 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications - including carpet backing, latex foam, adhesives, emulsions, textile coatings, non-wovens, and dispersions. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, neoprene, acrylic, vinyl acetate, and ethylene-vinyl acetate latex compounds. view less | |
| VESTOPLAST® 206 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 206 is a silane modified product with low viscosity and medium softening point. This product is a moisture-curable reactive system and can be purchased either in drums or 10kg Easy Peel Packages. The product can be used as a raw material for v...view more VESTOPLAST® 206 is a silane modified product with low viscosity and medium softening point. This product is a moisture-curable reactive system and can be purchased either in drums or 10kg Easy Peel Packages. The product can be used as a raw material for various applications amongst others automotive and window glazing. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. view less | Request Sample |
| VESTOPLAST® 308 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 308 is a functionalized grade. It is typically applied as a raw material for the production of hot melts for bonding metal and polar substrates. VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion...view more VESTOPLAST® 308 is a functionalized grade. It is typically applied as a raw material for the production of hot melts for bonding metal and polar substrates. VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 408 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 408 is a hard grade with excellent thermal stability under load and tear strength. It is typically applied as a raw material for the production of hot melts, e.g. for the textile-, paper- and packaging industry. Generally, VESTOPLAST® amorphou...view more VESTOPLAST® 408 is a hard grade with excellent thermal stability under load and tear strength. It is typically applied as a raw material for the production of hot melts, e.g. for the textile-, paper- and packaging industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 508 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 508 is a grade of low viscosity, long open time and low softening point. This product is typically applied as a raw material for the production of hot melts for the hygienic industry and for the production of mattresses. Generally, VESTOPLAST®...view more VESTOPLAST® 508 is a grade of low viscosity, long open time and low softening point. This product is typically applied as a raw material for the production of hot melts for the hygienic industry and for the production of mattresses. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 520 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 520 is a product of higher viscosity with a long open time and a low softening point. This product is typically applied as a raw material for cable filling compounds. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the follo...view more VESTOPLAST® 520 is a product of higher viscosity with a long open time and a low softening point. This product is typically applied as a raw material for cable filling compounds. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 608 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 608 is a product with a high softening point combined with a relatively low melt viscosity. It is typically applied as a raw material for the production of hot melt adhesives for the paper and packaging industry. Generally, VESTOPLAST® amorpho...view more VESTOPLAST® 608 is a product with a high softening point combined with a relatively low melt viscosity. It is typically applied as a raw material for the production of hot melt adhesives for the paper and packaging industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 703 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 703 is a grade of low melt viscosity and short open time. It is applied as a raw material for the production of hot melt adhesives for the packaging- and electrical industry as well as for fiber and filament fixation in carpets. Generally, VES...view more VESTOPLAST® 703 is a grade of low melt viscosity and short open time. It is applied as a raw material for the production of hot melt adhesives for the packaging- and electrical industry as well as for fiber and filament fixation in carpets. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 704 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 704 is a soft grade with a relatively short open time. It is applied as a raw material for the production of sprayable hot melt adhesives for the hygienic industry, as well as for labelling and production of sealing compositions. Generally, VE...view more VESTOPLAST® 704 is a soft grade with a relatively short open time. It is applied as a raw material for the production of sprayable hot melt adhesives for the hygienic industry, as well as for labelling and production of sealing compositions. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 708 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 708 is a relatively soft product of low melt viscosity and a good thermal stability under load. It is applied as a raw material for the production of hot melt adhesives for the hygienic-, paper- and packaging industry as well as for fiber and ...view more VESTOPLAST® 708 is a relatively soft product of low melt viscosity and a good thermal stability under load. It is applied as a raw material for the production of hot melt adhesives for the hygienic-, paper- and packaging industry as well as for fiber and filament fixation in carpets. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 750 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 750 shows a good tear strength and elongation at break combined with a relatively low softening point. This product is applied as a raw material for the production of hot melt adhesives for the hygienic and woodworking industry. Generally, VES...view more VESTOPLAST® 750 shows a good tear strength and elongation at break combined with a relatively low softening point. This product is applied as a raw material for the production of hot melt adhesives for the hygienic and woodworking industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 751 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: ...view more VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. view less | Request Sample |
| VESTOPLAST® 792 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 792 is a high viscous grade of good tear strength and elongation at break. This product is applied as a raw material for the production of hot melt adhesives for the furniture industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO...view more VESTOPLAST® 792 is a high viscous grade of good tear strength and elongation at break. This product is applied as a raw material for the production of hot melt adhesives for the furniture industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 828 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 828 shows a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges, hot melt adhesives fo...view more VESTOPLAST® 828 shows a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges, hot melt adhesives for the woodworking industry, heavy coating compounds for carpet tiles and for preshaped-car carpets. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 888 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 888 is a high viscous product with good thermal stability under load and a short open time. This product is typically applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges ...view more VESTOPLAST® 888 is a high viscous product with good thermal stability under load and a short open time. This product is typically applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges as well as for hot melt adhesives for the woodworking industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® 891 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 891 is a high viscosity product with a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bri...view more VESTOPLAST® 891 is a high viscosity product with a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges as well as for hot melt adhesives for the woodworking industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® EP 807 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 80...view more VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 807 the adhesion to e.g. PP can be improved. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. view less | Request Sample |
| VESTOPLAST® EP V2094 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Lo...view more VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Low process temperatures are possible with heat stability still remaining high. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. view less | Request Sample |
| VESTOPLAST® EP V2103 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, t...view more VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, the polymer shows a very short setting time which enables for fast production processes. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. view less | Request Sample |
| VESTOPLAST® S | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® S is applied as a raw material for the production of polymer modified bitumen for road construction. This product has a melt viscosity at 190 degrees Celsius. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following ben...view more VESTOPLAST® S is applied as a raw material for the production of polymer modified bitumen for road construction. This product has a melt viscosity at 190 degrees Celsius. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOPLAST® SR | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® SR is applied as a raw material for the production of polymer modified bitumen for road construction. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bondin...view more VESTOPLAST® SR is applied as a raw material for the production of polymer modified bitumen for road construction. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. view less | Request Sample |
| VESTOWAX® C 20 Flakes/Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C 20 Flakes/Micro prills is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white pellets, and it has a drop point of 106-111 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. ...view more VESTOWAX® C 20 Flakes/Micro prills is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white pellets, and it has a drop point of 106-111 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less | Request Sample |
| VESTOWAX® C 60 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C 60 Powder is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white powder, and it has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a ...view more VESTOWAX® C 60 Powder is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white powder, and it has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less | Request Sample |
| VESTOWAX® C 60 Prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C 60 Prills is an oxidised Fischer-Tropsch wax. This grade has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applicatio...view more VESTOWAX® C 60 Prills is an oxidised Fischer-Tropsch wax. This grade has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less | Request Sample |
| VESTOWAX® C40 Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C40 is a Fischer-Tropsch wax oxidate with an acid number of 24-27 mg KOH/g | Request Sample |
| VESTOWAX® EH 100 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® EH 100 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white pellets, and it has a drop point of 102-110 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-...view more VESTOWAX® EH 100 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white pellets, and it has a drop point of 102-110 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less | Request Sample |
| VESTOWAX® FM 1012 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® FM 1012 is a micronised Fischer-Tropsch/PFTE wax. | Request Sample |
| VESTOWAX® H 2050 MG | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® H 2050 MG is a non-functionalised Fischer-Tropsch hard paraffin. | Request Sample |
| VESTOWAX® SH 105 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® SH 105 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-P...view more VESTOWAX® SH 105 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less | Request Sample |
| VESTOWAX® SH 105 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® SH 105 Powder is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Pr...view more VESTOWAX® SH 105 Powder is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less | Request Sample |
| VESTOWAX® SH 112 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® SH 112 is a micronised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white micronised powder, and it has a drop point of 112-120 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Proces...view more VESTOWAX® SH 112 is a micronised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white micronised powder, and it has a drop point of 112-120 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less | Request Sample |
