| KBE-1003 | Shin-Etsu Silicones of America | KBE-1003 (CH2=CH-Si (OCH2CH3)3, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBE-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatly...view more KBE-1003 (CH2=CH-Si (OCH2CH3)3, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBE-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatly enhances the structural reinforcement of glass fibers or minerals in filled systems, and it provides good interfacial adhesion to many different substrates such as glass, metals, and ceramics. view less | |
| KBE-585 | Shin-Etsu Silicones of America | KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significa...view more KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBE-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBE-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less | |
| KBE-9007 | Shin-Etsu Silicones of America | KBE-9007, 3-isocyanatopropyltriethoxysilane, is a di-functional silane coupling agent that imparts improved performance to many diverse systems (elastomers, resins, composites, etc.) and applications (primers, paints, coatings, sealants, molded parts, etc...view more KBE-9007, 3-isocyanatopropyltriethoxysilane, is a di-functional silane coupling agent that imparts improved performance to many diverse systems (elastomers, resins, composites, etc.) and applications (primers, paints, coatings, sealants, molded parts, etc.). The isocyanato group readily reacts with several common organic functional groups such as hydroxyl, carboxyl, amino, and mercapto. The three hydrolytically sensitive ethoxy groups not only react with water but also form strong covalent bonds to a wide variety of inorganic and metallic surfaces. As a result, KBE-9007 is a useful modifier for many different materials, providing excellent adhesion to different surfaces (glass, glass fibers, ceramics, silicas, metals, composites, etc.), moisture-sensitive crosslinking capabilities, and other improved physical properties as well. view less | |
| KBE-903 | Shin-Etsu Silicones of America | KBE-903 (3-aminopropyltriethoxysilane) is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, glass fibers and elastomers. KBE-903 has been utilized in many different materials incl...view more KBE-903 (3-aminopropyltriethoxysilane) is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, glass fibers and elastomers. KBE-903 has been utilized in many different materials including thermosets, thermoplastics, and elastomers such as acrylics, epoxies, phenolics, melamines, urethanes, polycarbonates, polyesters, nylons, polystyrenes, PET, PBT, ABS, polysulfides, and silicones. In the majority of these applications, the use of KBE-903 leads to exceptionally strong interaction between the inorganic and organic components of a given system. For example, KBE-903 is commonly used to improve the performance of silica or glass fiber reinforced materials. It can improve many properties such as adhesion to a wide variety of substrates like glass, ceramics, and metals; flexural, compressive, tensile, and interlaminar shear strengths; pigment and filler wetting and dispersion; as well as hydrolytic stability and long term performance during and after exposure to moisture. view less | |
| KBE-9103 | Shin-Etsu Silicones of America | KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9...view more KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9103 is a protected amine that does not react with most epoxides, acidic groups, or phenols. However, in the presence of moisture, the ketimine functional group readily generates a free primary amine that will react with epoxides, acidic groups, and phenols. The latent reactivity of this protected amine makes KBE-9103 an ideal coupling agent for many one-component systems in which exposure to ambient moisture quickly and easily provides a highly reactive coupling agent. view less | |
| KBM-1003 | Shin-Etsu Silicones of America | KBM-1003, vinyltrimethoxysilane, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBM-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatl...view more KBM-1003, vinyltrimethoxysilane, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBM-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatly enhances the structural reinforcement of glass fibers or minerals in filled systems, and it provides good interfacial adhesion to many different substrates such as glass, metals, and ceramics. For example, KBM-1003 can be incorporated into acrylic systems as a comonomer or into polyethylene systems by radically init iated grafting. The functional copolymers produced by these types of methods can have very different properties and uses from their non-silane containing analogs, such as low molecular weight liquid oligomers or moderate molecular weight polymers that crosslink upon exposure to moisture or that have significantly enhanced adhesion to inorganic and metallic surfaces. view less | |
| KBM-303 | Shin-Etsu Silicones of America | KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water res...view more KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-303 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| KBM-3033 | Shin-Etsu Silicones of America | KBM-3033 has been developed as an economical surface active silane for use as a high performance coating agent, providing the combined benefits of hydrophobicity, low surface energy, and superior adhesion. Due to their inherently low surface energies, sil...view more KBM-3033 has been developed as an economical surface active silane for use as a high performance coating agent, providing the combined benefits of hydrophobicity, low surface energy, and superior adhesion. Due to their inherently low surface energies, silicones and silanes are often used as coatings or coating additives to impart weather resistance, chemical resistance, water-repellency, oil-repellency, and/or release properties. In particular, silicones and silanes with hydrolyzable and/or other reactive functional groups offer significant advantages and superior performance in many material systems where good adhesion, durability, longevity, and ease of application are important. view less | |
| KBM-403 | Shin-Etsu Silicones of America | KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water res...view more KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-403 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| KBM-503 | Shin-Etsu Silicones of America | KBM-503, 3-methacryloxypropyltrimethoxysilane, is a di-functional silane coupling agent having a reactive acrylic group as well as three hydrolyzable methoxy groups. It is a useful modifier for many high performance products including optical fibers, acry...view more KBM-503, 3-methacryloxypropyltrimethoxysilane, is a di-functional silane coupling agent having a reactive acrylic group as well as three hydrolyzable methoxy groups. It is a useful modifier for many high performance products including optical fibers, acrylics, epoxies, unsaturated polyester-fiberglass composites, and sol-gel composites. The reactive acrylic group can be copolymerized with many different unsaturated organic monomers such as vinyl monomers, organoacrylic monomers, styrene, or modified styrenes (copolymerization parameters e = 0.07, Q = 2.7). This yields polymers bearing pendant trimethoxysilyl groups, which can serve several different purposes. These groups can render a system cross-linkable upon exposure to water such as atmospheric moisture or steam. The pendant trimethoxysilyl groups can also improve the physical properties of composites by enabling the organic polymer to bond directly with the inorganic filler. Furthermore, these pendant trimethoxysilyl groups can dramatically improve the adhesion of organic polymers to many inorganic and metallic substrates. view less | |
| KBM-5103 | Shin-Etsu Silicones of America | KBM-5103, 3-acryloxypropyltrimethoxysilane, is a novel silane coupling agent having a highly reactive acrylic group. It is a useful modifier for many high performance products including optical fibers, acrylics, epoxies, and composites. When compared to S...view more KBM-5103, 3-acryloxypropyltrimethoxysilane, is a novel silane coupling agent having a highly reactive acrylic group. It is a useful modifier for many high performance products including optical fibers, acrylics, epoxies, and composites. When compared to Shin-Etsu’s KBM-503, methacryloxypropyltrimethoxy-silane, KBM-5103 is a significantly more reactive monomer. For example, thermosetting resin products reinforced by fiber or cloth treated with KBM-5103 have significantly improved mechanical and electrical properties. KBM-5103 is also especially effective in UV cured systems. view less | |
| KBM-573 | Shin-Etsu Silicones of America | KBM-573, N-phenyl-3-aminopropyltrimethoxysilane), is a specialty silane coupling agent that significantly improves the performance of many composite materials in more demanding applications. KBM-573 provides many of the same benefits for which aminosilane...view more KBM-573, N-phenyl-3-aminopropyltrimethoxysilane), is a specialty silane coupling agent that significantly improves the performance of many composite materials in more demanding applications. KBM-573 provides many of the same benefits for which aminosilanes are well known. When used as an additive for thermoplastics and thermosets, KBM-573 dramatically improves the dispersion of fillers, lowers viscosities, and positively impacts other aspects of processing the uncured composite. Upon curing, it creates strong covalent bonds between the inorganic and organic components within the composite and it provides superior adhesion of the composite to many different substrates. However, when compared to more common aminoalkylsilanes, such as Shin-Etsu KBM-603 or KBM-903, the phenyl ring of KBM-573 leads to significantly enhanced thermal stability and better organic compatibility in many systems. view less | |
| KBM-585 | Shin-Etsu Silicones of America | KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosil...view more KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosilanes, the ureido group of KBM-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBM-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBM-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less | |
| KBM-602 | Shin-Etsu Silicones of America | KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics...view more KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics, epoxies, phenolics, melamines, polyurethanes, polycarbonates, polyesters, nylons, polystyrenes, PVC, PET, PBT, ABS, and silicones. KBM-602 is most often used to improve strength, flexibility, and adhesion due to its ability to create exceptionally strong interactions between inorganic and organic components of a given system. Additional advantages may include improved processing (improvements in viscosity and other flow characteristics, improved compatibility of composite components and reduced energy consumption, better filler dispersion, the ability to increase the ratio of filler to resin, and improved resistance to chemicals and moisture. view less | |
| KBM-603 | Shin-Etsu Silicones of America | KBM-603, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane), is a diamino-functional silane with applications in composites, coatings, adhesives, and sealants. KBM-603 has been used in a wide variety of advanced thermosets, thermoplastics, and elastomers in...view more KBM-603, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane), is a diamino-functional silane with applications in composites, coatings, adhesives, and sealants. KBM-603 has been used in a wide variety of advanced thermosets, thermoplastics, and elastomers including acrylics, cellulosics, epoxies, phenolics, melamines, polyurethanes, polyureas, polycarbonates, polyesters, polyethers, nylons, polystyrenes, PVC, PET, PBT, ABS, and silicones. KBM-603 is used extensively to promote strong and durable adhesion to materials such as glass, ceramics, and metals. This adhesion is a result of the silane’s ability to create exceptionally strong interactions (such as covalent bonding and hydrogen bonding) between the inorganic and organic components of a system. KBM-603 is often used to improve flexural, compressive, and interlaminar shear strengths as well as adhesion in many filled systems such as mineral and glass-reinforced thermosets and thermoplastics. view less | |
| KBM-903 | Shin-Etsu Silicones of America | KBM-903, 3-aminopropyltrimethoxysilane, is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, and elastomers. Similar in structure and function to Shin-Etsu’s KBE-903, 3-aminopropy...view more KBM-903, 3-aminopropyltrimethoxysilane, is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, and elastomers. Similar in structure and function to Shin-Etsu’s KBE-903, 3-aminopropyltriethoxysilane, the three hydrolyzable methoxy groups of KBM-903 are slightly more reactive than the three ethoxy groups of KBE-903. As such, this product may lead to improved interaction between the inorganic and organic components of some systems. If a longer shelf life or another aspect of increased hydrolytic stability is critical to a given application, KBE-903 may be more suitable. In most applications, this product is an appropriate replacement for KBE-903 and has the added benefit of lower weight loss upon hydrolysis. view less | |
| KBM-974 | Shin-Etsu Silicones of America | KBM-974 is a type silane in methanol that has superior water solution stability than conventional vinylbenzylamino silanes like KBM-575. The reactivity and compatibility of this polyfunctional alkoxysilane product makes it an ideal candidate to improve th...view more KBM-974 is a type silane in methanol that has superior water solution stability than conventional vinylbenzylamino silanes like KBM-575. The reactivity and compatibility of this polyfunctional alkoxysilane product makes it an ideal candidate to improve the properties of many different materials. For example, KBM-974 signif icantly improves the flexural and tensile strengths of glass fiber composites, especially in applications involving long-term exposure to water and high humidity. KBM-974 improves the chemical bonding between inorganic fillers and organic resins and the adhesion of composites and organic polymers to inorganic surfaces. Diluted solutions of KBM-974 are useful primers for bonding organic materials to inorganic surfaces. Similar to other silane coupling agents, formulations containing KBM-974 often demonstrate better processing characteristics. KBM-974 is an especially effective coupling agent and dispersing aid in thermoset composites such as epoxies, unsaturated polyesters, and polyimides, and works well in mineral-filled thermoplastics such as polypropylene, polybutyleneterephthalate, PVC, nylons, and polycarbonates. It is an ideal choice for many electronics applications because of its excellent head resistance to solder. view less | |
| KBP-90-40 | Shin-Etsu Silicones of America | KBP-90-40 is a high solids content primary aminoalkyl silane oligomer in aqueous solution. It is ready to use, and also depolymerizes to mostly monomer upon dilution of water. This product can be used as an additive for adhesives, sealants, coatings, fibe...view more KBP-90-40 is a high solids content primary aminoalkyl silane oligomer in aqueous solution. It is ready to use, and also depolymerizes to mostly monomer upon dilution of water. This product can be used as an additive for adhesives, sealants, coatings, fiberglass, filler treatments, and more. view less | |
| Polon MF-56 Silicone Water Repellent | Shin-Etsu Silicones of America | Polon MF-56 Silicone Water Repellent is a silicone emulsion that produces high performance water repellent coatings and has good compatibility with and good adhesion to a variety of surfaces (wood, concrete, composites, organic polymers, ceramics, glass, ...view more Polon MF-56 Silicone Water Repellent is a silicone emulsion that produces high performance water repellent coatings and has good compatibility with and good adhesion to a variety of surfaces (wood, concrete, composites, organic polymers, ceramics, glass, etc.). Polon MF-56 cures to a tough elastomeric polysiloxane film, and yields a transparent coating that displays immediate and long-lasting beading as well as water repellency that improves significantly with weathering. view less | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...view more STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. view less | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...view more STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. view less | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...view more STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. view less | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...view more STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. view less | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. view less | |
| STANLUX® Gold 2100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2100 is available in several shades and has an average size of 50 microns. view less | |
| STANLUX® Gold 2700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2700 is available in several shades and has an average size of 45 microns. view less | |
| STANLUX® Gold 2800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2800 is available in several shades and has an average size of 45 microns. view less | |
| STANLUX® Gold 3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3500 is available in several shades and has an average size of 35 microns. view less | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. view less | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...view more STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. view less | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and ...view more STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance and general industrial paints. view less | |
| STANLUX® Paste 100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance,...view more STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective, or marine coatings. view less | |
| STANLUX® Paste 1100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation...view more STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...view more STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. view less | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...view more STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...view more STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...view more STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. view less | |
| STANLUX® Paste 1200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is ...view more STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 14 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1290 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power an...view more STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 8 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...view more STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. view less | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...view more STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. view less | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...view more STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. view less | |
| STANLUX® Paste 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commo...view more STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for industrial paints, and roof coatings. It has an average particle size of 19 microns and a minimum water coverage of 14,000 cm2/g. view less | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...view more STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...view more STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...view more STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. view less | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...view more STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...view more STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...view more STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...view more STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. view less | |
| STANLUX® Paste 1900 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level...view more STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level and is recommended for systems requiring protective properties. It has an average particle size of 32 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: industrial paints, maintenance, protective and marine coatings. view less | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...view more STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. view less | |
| STANLUX® Paste 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level...view more STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level and is recommended for systems requiring differentiated metallic effects, and brighter metallic pigment. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: decorative paints, industrial paints, and trade paints. view less | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...view more STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. view less | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...view more STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. view less | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...view more STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. view less | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...view more STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. view less | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...view more STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. view less | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...view more STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. view less | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...view more STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. view less | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...view more STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. view less | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...view more STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. view less | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...view more STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. view less | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...view more STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. view less | |
| STANLUX® Silver 2210 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an a...view more STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an average particle size of 60 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver 2240 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an a...view more STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...view more STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...view more STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...view more STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...view more STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...view more STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...view more STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3871 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an aver...view more STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver 3891 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property....view more STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property. STANLUX® Silver 3891 has an average particle size of 11 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R2970 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Sil...view more STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Silver R2970 has an average particle size of 32 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3270 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an av...view more STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an average particle size of 25 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3370 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an ave...view more STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an ave...view more STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3670 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an ave...view more STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 ha...view more STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has ...view more STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4100 has an average particle size of 64 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4112 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4112 has an average particle size of 45 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4114 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metal...view more STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4114 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4200 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4400 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4400 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4400 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4400 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® SIlver R4500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4500 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...view more STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4700 has an average particle size of 22 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...view more STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4800 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4850 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metalli...view more STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4850 has an average particle size of 15 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R6200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an...view more STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less |
