| Diethylene Glycol Dibutyl Ether | Clariant - Coatings & Construction Chemicals | Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, ...view more Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, and chlorinated hydrocarbons. It has little to no solubility in water and high molecular weight aliphatic hydrocarbons. DEGDBE is an excellent solvent for a wide range of polar and non-polar substances. Diethylene glycol dibutyl ether is an inert, aprotic solvent. It has wide applicability in various types of cleaning formulations. Examples include grease, wax, and stain removers and special low-flammability non-aqueous cleaning systems for electronic equipment. DEGDBE is used as a solvent for several coatings applications. It is a good coalescing agent with coupling ability. It is also used as solvent for inkjet inks, in formulations of deletion fluids for positive printing plates, retouching agents for lithographic printing and in cleaning agents for removing inks from printing machines. view less | |
| Diethylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals | Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chem...view more Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chemical stability and the absence of reactive groups, Diethylene glycol dimethyl ether can be used as an inert reaction medium for many organic and organometallic reactions and for polymerizations. view less | |
| Dipropylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals | Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, ap...view more Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, aprotic solvent and can be used in proton sensitive systems. Dipropylene Glycol Dimethyl Ether is not listed as a Hazardous Air Pollutant, has low toxicity, and offers an alternative to solvents being phased out as a result of the Clean Air Act. Due to its chemical stability and the absence of reactive groups, DPGDME can also be used as an inert reaction medium, e. g. for reactions with alkali and alkaline-earth metals (Grignard reactions), polymerizations etc. Dipropylene Glycol Dimethyl Ether is used in solvent-based coatings and water-based polyurethane/ isocyanate coating systems. It is used as environmentally friendly substitute for NMP (N-methyl pyrrolidone) e.g as as coalescing agent in water based polyurethane dispersions. Dipropylene glycol dimethyl ether is also used as a solvent for wood and furniture coatings as well as a solvent for hardeners. view less | |
| Dispersogen® 145 | Clariant - Coatings & Construction Chemicals | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales coloran...view more Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales colorants in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. view less | |
| Dispersogen® 1728 | Clariant - Coatings & Construction Chemicals | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigme...view more Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigments. The advantages of Dispersogen® 1728 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. This slightly cloudy, viscous or pasty liquid is composed of an aqueous solution of a novolac derivative. view less | |
| Dispersogen® 2774 | Clariant - Coatings & Construction Chemicals | Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pig...view more Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pigments in aqueous pigment preparations. The advantages of Dispersogen® 2774 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. This yellowish, viscous to pasty liquid is composed of a novolac alkoxylate. view less | |
| Dispersogen® 3169 | Clariant - Coatings & Construction Chemicals | Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing...view more Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing inks. It is suitable for inorganic pigments, carbon black and in particular for organic pigments. The advantages of Dispersing® Agent 3169 are high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. view less | |
| Dispersogen® 4387 | Clariant - Coatings & Construction Chemicals | Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable f...view more Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable for inorganic pigments (metal oxids), carbon black and especially for organic pigments (polycylcic and phthalocyanine pigments) that are difficult to disperse. This brown, cloudy liquid is free of any additional biocide, and it is composed of a modified castor oil derivative. The advantages of Dispersogen® 4387 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® AN 100 | Clariant - Coatings & Construction Chemicals | Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humec...view more Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humectant, and compatibilizer. Dispersogen® AN 100 is suitable for both inorganic and organic pigments. An additional humectant is not necessary. view less | |
| Dispersogen® FA | Clariant - Coatings & Construction Chemicals | Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment pr...view more Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment preparations and point of sale colorants. view less | |
| Dispersogen® FN | Clariant - Coatings & Construction Chemicals | Dispersogen® FN is a wetting and dispersing agent for waterborne pigment preparations. It is recommended for inorganic pigment preparations and point-of-sales colorants. | |
| Dispersogen® FSE | Clariant - Coatings & Construction Chemicals | Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE ...view more Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE is often used for inorganic pigments in combination with fatty amines like Genamin® CC 100 or Genamin® TA 100. Dispersogen® FSE offers a balanced viscosity to minimize sedimentation and at the same time enables dosing, pumping and feeding. A slightly alkaline pH of 7.5 - 8.5, adjusted by alkali like caustic soda, reduces the viscosity. view less | |
| Dispersogen® LEC | Clariant - Coatings & Construction Chemicals | Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the th...view more Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the the stability of colorants and the compatibility with waterborne and solvent-born coatings. view less | |
| Dispersogen® LFH | Clariant - Coatings & Construction Chemicals | Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It...view more Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® PCE | Clariant - Coatings & Construction Chemicals | Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chai...view more Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chain absorb onto the inorganic pigments and provide steric stabilization due to the polyethylene glycol ether side chains. This mechanism is sometimes superior to the electrostatic stabilization of polyacrylic acid salts or copolymers of acrylic acid and maleic acid resulting in higher dispersion stability. view less | |
| Dispersogen® PL 30 | Clariant - Coatings & Construction Chemicals | Dispersogen® PL 30 is an extremely efficient polymeric dispersing agent for waterborne in-plant tinters based on organic pigments. It is able to disperse very high pigment loads while still forming stable low viscous pigments pastes. | |
| Dispersogen® PL 40 | Clariant - Coatings & Construction Chemicals | Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, preven...view more Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, prevents sedimentation or syneresis and demonstrates good compatibility with resins and binders in waterborne coatings and inks. view less | |
| Dispersogen® PSM | Clariant - Coatings & Construction Chemicals | Dispersogen® PSM is a rheology modifier for pigment pastes. By absorbing onto the pigment surface and forming a protective layer, inter-particle forces are shielded and the viscosity of the pigment preparation is decreased. When Dispersogen® PSM is comb...view more Dispersogen® PSM is a rheology modifier for pigment pastes. By absorbing onto the pigment surface and forming a protective layer, inter-particle forces are shielded and the viscosity of the pigment preparation is decreased. When Dispersogen® PSM is combined with dispersing agents like Dispersogen® FA, Dispersogen® FSE or Dispersogen® ECS, formulators can reduce the viscosity of the pigment dispersion and increase the pigment concentration. view less | |
| Dispersogen® PTS | Clariant - Coatings & Construction Chemicals | Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as...view more Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as emulsifier for polymer dispersions. This product is preferably suitable for organic pigments and carbon blacks and allows the production of stable, free flowing pigment preparations with low VOC – content and low odor. view less | |
| Dispersogen® SNW | Clariant - Coatings & Construction Chemicals | Dispersogen® SNW is a dispersing agent for paints and coatings. It also offers wetting properties, improves the compatibility of pigments with resins and solvents, and prevents rub out. This product improves the compatibility of organic pigments like Phth...view more Dispersogen® SNW is a dispersing agent for paints and coatings. It also offers wetting properties, improves the compatibility of pigments with resins and solvents, and prevents rub out. This product improves the compatibility of organic pigments like Phthalocyanine pigments (blues and green), Quinacridone pigments (red and purple) and other polycyclic pigments. Also carbon blacks are dispersed and the tinting strength in improves. view less | |
| Dispersogen® UDN | Clariant - Coatings & Construction Chemicals | Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with hi...view more Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with high solid contents. Dispersogen® UDN is used in emulsion paints to improve compatibility of pigments and minerals with polymers and binders and to enhance the tinting strength of organic pigments. view less | |
| Emulsogen® 4084 | Clariant - Coatings & Construction Chemicals | Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyv...view more Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyvinyl acetate, acrylate and styrene/acrylate dispersions to stabilize the rheological behaviour of the polymer dispersions and to improve the electrolyte and shear stability. It can be used in combination with other nonionic, anionic and cationic surfactants. view less | |
| Emulsogen® EPA 073 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for pa...view more Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food. view less | |
| Emulsogen® EPA 1954 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled p...view more Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled particle size and low coagulation during the polymerization process. view less | |
| Emulsogen® EPN 118 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 118 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene. | |
| Emulsogen® EPN 217 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw s...view more Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw stability, electrolyte and sheer stability. view less | |
| Emulsogen® EPN 287 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadien...view more Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadiene / styrene latex. view less | |
| Emulsogen® EPN 407 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadi...view more Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadiene / styrene latex. view less | |
| Emulsogen® LA 083 | Clariant - Coatings & Construction Chemicals | Emulsogen® LA 083 is an anionic emulsifier and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 8 mole ethylene oxide, ammonium salt. This product is readily biodegradable and free of additional preservatives. Emulsogen® L...view more Emulsogen® LA 083 is an anionic emulsifier and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 8 mole ethylene oxide, ammonium salt. This product is readily biodegradable and free of additional preservatives. Emulsogen® LA 083 is used as an emulsifier for emulsion polymerization of vinyl acetate, acrylic acid esters, methacrylic acid esters, styrene and other monomers. This product is also used as a dispersing agent for pigments to produce low viscous, stable pigment dispersions. view less | |
| Emulsogen® LCN 070 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be ...view more Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be used for the following applications: as wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l; as wetting and dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,5 - 1,0 %; as emulsifier for O/W - emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 %; and as emulsifier for emulsion polymerization in recommended levels of 1 - 2 % based on monomers. view less | |
| Emulsogen® LCN 088 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as...view more Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as a wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l and as a dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,1 - 1,0 %. Emulsogen® LCN 088 is also used as an emulsifier for O/W -emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 % and for emulsion polymerization in recommended levels of 1- 2 % based on monomers. view less | |
| Emulsogen® LCN 118 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte sta...view more Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte stability of polymer dispersions. Emulsogen® LCN 118 is also used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 158 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is use...view more Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 217 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as ...view more Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. This product is also is used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 287 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen®...view more Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen® LCN 287 improves the shear, temperature and electrolyte stability of polymer dispersions. It is used as a dispersing agent for inorganic and organic pigments in aqueous pigment preparations. Emulsogen® LCN 287 is used for aqueous paints and coatings as a dispersing agent and stabilizer to improve the compatibility of pigments with polymers. It prevents skinning of aqueous coatings e.g. in textile coaitngs with emulsion polymers. This product is also used as an emulsifier for aqueous emulsions of alkyd resins. view less | |
| Emulsogen® LCN 407 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving ...view more Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. Emulsogen® LCN 407 can be diluted with water at room temperature without forming a strong gel phase. view less | |
| Emulsogen® PF 20 S | Clariant - Coatings & Construction Chemicals | Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentra...view more Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. It can be used in combination with other nonionic and anionic surfactants. Emulsogen® PF 20 S is used as an emulsifier in emulsion polymerization, particularly in the manufacture of acrylate and styrene / acrylate dispersions. view less | |
| Emulsogen® SF 8 | Clariant - Coatings & Construction Chemicals | Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can al...view more Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can also be used as a cake dewatering aide and as a wetting agent for aqueous, VOC-free paints and coatings. view less | |
| Emulsogen® TS 160 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 160 is a nonionic wetting and dispersing agent. It has a HLB value of about 13 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 160 is suitable for organic pigments and carbon black to produce st...view more Emulsogen® TS 160 is a nonionic wetting and dispersing agent. It has a HLB value of about 13 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 160 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents and with low viscosities. Emulsogen® TS 160 improves the compatibility of pigments and minerals with polymers and binders. It also improves the shelf life and stability of emulsion paints. This product is free of any additional biocide. view less | |
| Emulsogen® TS 200 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 200 is a nonionic dispersing agent and emulsifier. It is is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 200 improves the compatibility of pigment...view more Emulsogen® TS 200 is a nonionic dispersing agent and emulsifier. It is is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 200 improves the compatibility of pigments and minerals with polymers and binders. It also improves shelf life and stability of emulsion paints. view less | |
| Emulsogen® TS 600 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, ...view more Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 600 improves the compatibility of pigments and minerals with polymers and binders. It prevents skinning of emulsion polymers in paints and improves the shelf life and stability of emulsion paints. view less | |
| Genagen® COA | Clariant - Coatings & Construction Chemicals | Genagen® COA is a new non-VOC coalescing agent for the effective reduction of minimal film formation temperature (MFFT) without impacting viscosity. Label-free and for all kinds of paints binders used in diverse decorative coatings applications. | |
| Genamin® BTMS | Clariant - Coatings & Construction Chemicals | Genamin® BTMS is a safe, efficient and widely used conditioning quat. Outstanding performance on hair, such as soft, natural feel and excellent dry combing properties is combined with safe and convenient handling. Genamin® BTMS offers a superb softening e...view more Genamin® BTMS is a safe, efficient and widely used conditioning quat. Outstanding performance on hair, such as soft, natural feel and excellent dry combing properties is combined with safe and convenient handling. Genamin® BTMS offers a superb softening effect for thick and hard to manage hair. It is soluble in aqueous systems, compatible with cationic and amphoteric surfactants, and has excellent stability over wide pH range. view less | |
| Genamin® C 050 | Clariant - Coatings & Construction Chemicals | Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin gr...view more Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® C 100 | Clariant - Coatings & Construction Chemicals | Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grad...view more Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® D 01/2000 | Clariant - Coatings & Construction Chemicals | Genamin® D 01/2000 is a diamine based on polypropylene glycol with an average molecular mass of 2000 g/mol. Genamin® D 01/2000 contains terminal primary amine groups which can undergo all typical amine reactions. | |
| Genamin® M 41/2000 | Clariant - Coatings & Construction Chemicals | Genamin® M 41/2000 is an amine based on a statistical polyethylene/polypropylene glycol co polymer with an average molecular mass of 2000 g/mol. This product is also available as Genamin® M 41/2000 Terra, providing the same performance as its conventio...view more Genamin® M 41/2000 is an amine based on a statistical polyethylene/polypropylene glycol co polymer with an average molecular mass of 2000 g/mol. This product is also available as Genamin® M 41/2000 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 72.8%. view less | |
| Genamin® O 020 Special | Clariant - Coatings & Construction Chemicals | Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic...view more Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® O 200 | Clariant - Coatings & Construction Chemicals | Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic...view more Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genapol® ED 3060 | Clariant - Coatings & Construction Chemicals | Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of orga...view more Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of organic pigments like phthalocyanine blue or red and yellow azo pigments. view less | |
| Genapol® LA 070 | Clariant - Coatings & Construction Chemicals | Genapol® LA 070 is a liquid fatty alcohol polyglycol ether used as an emulsifier, solubilizer, fat dispersant, dissolving agent, and thickener for anionic liquid formulations. | |
| Genapol® O 080 | Clariant - Coatings & Construction Chemicals | Genapol® O 080 is a liquid to pasty fatty alcohol polyglycol ether non-ionic surfactant for the detergent industry. Applications include wetting agents, dispersing agents, special cleaning agents, industrial cleaning agents, and emulsifiers. | |
| Genapol® O 100 | Clariant - Coatings & Construction Chemicals | Genapol® O 100 is a pasty fatty alcohol polyglycol ether nonionic surfactant for the detergent industry. Applications include wetting agents, dispersing agents, special cleaning agents, industrial cleaning agents, and emulsifiers. | |
| Genapol® PF 20 | Clariant - Coatings & Construction Chemicals | Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product...view more Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product is a slightly cloudy, colorless liquid that is composed of block copolymer of propylene oxide and ethylene oxide, containing 20% w/w ethylene oxide. Genapol® PF 20 has good wetting and dispersing action coupled with low foaming tendency. Within the Genapol® PF series, the products with a lower degree of ethoxylation have a better foam-suppressing effect than the products with a higher degree of ethoxylation. Typical applications include rinsing aids, detergents for dishwashers and bottle-rinsing machines and industrial cleaning formulations. view less | |
| Genapol® PF 40 | Clariant - Coatings & Construction Chemicals | Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...view more Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. view less | |
| Genapol® X 050 | Clariant - Coatings & Construction Chemicals | Genapol® X 050 is a nonionic emulsifier for the chemical industry. This colourless, clear liquid is compatible with anionic, cationic and other nonionic surfactants and resistant against strong alkaline and acid solutions. Genapol® X 050 is used as a wett...view more Genapol® X 050 is a nonionic emulsifier for the chemical industry. This colourless, clear liquid is compatible with anionic, cationic and other nonionic surfactants and resistant against strong alkaline and acid solutions. Genapol® X 050 is used as a wetting agent and emulsifier e.g. in detergents, industrial & institutional cleaners or in wax and silicon emulsions. view less | |
| Genapol® X 080 | Clariant - Coatings & Construction Chemicals | Genapol® X 080 is a colourless, slightly cloudy liquid isotridecyl alcohol polyglycol ether nonionic surfactant for the detergent industry. Applications include cleaners for the technical sector, textile industry, metal industry, and paper industry. | |
| Genapol® X 090 | Clariant - Coatings & Construction Chemicals | Genapol® X 090 is a nonionic emulsifier for the chemical industry. This colorless, turbid liquid is compatible with anionic, cationic and other nonionic surfactants and is resistant against strong alkaline and acid solutions. Genapol® X 090 is used as a w...view more Genapol® X 090 is a nonionic emulsifier for the chemical industry. This colorless, turbid liquid is compatible with anionic, cationic and other nonionic surfactants and is resistant against strong alkaline and acid solutions. Genapol® X 090 is used as a wetting agent, emulsifier and dispersing agent e.g. in detergents, industrial & institutional cleaners, in emulsion polymerization or in wax and silicon emulsions. view less | |
| Genapol® X 100 | Clariant - Coatings & Construction Chemicals | Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. ...view more Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. This product is also available as Genapol® X 100 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 61.7%. view less | |
| Genapol® X 1003 | Clariant - Coatings & Construction Chemicals | Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electroly...view more Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1003 is added to the emulsion either before, during or after the polymerization process. This product can be used as an emulsifier for bitumen emulsions. view less | |
| Genapol® X 1005 | Clariant - Coatings & Construction Chemicals | Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, du...view more Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, during or after the polymerization process. This product can also be used as an emulsifier for bitumen emulsions. view less | |
| Genapol® X 150 | Clariant - Coatings & Construction Chemicals | Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate d...view more Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate dispersions to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. This product is used either during or after polymerization. view less | |
| Genapol® X 307 | Clariant - Coatings & Construction Chemicals | Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styren...view more Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation and improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. view less | |
| Genapol® X 407 | Clariant - Coatings & Construction Chemicals | Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw st...view more Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. This product is also available as Genapol® X 407 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 86%. view less | |
| Hostapal® BV conc. | Clariant - Coatings & Construction Chemicals | Hostapal® BV conc. is an anionic emulsifier for the chemical industry. As an anionic surfactant, it is compatible with other anionic and nonionic surfactants. With cationic surfactants, water-insoluble neutral salts are formed. Hostapal® BV conc. is resis...view more Hostapal® BV conc. is an anionic emulsifier for the chemical industry. As an anionic surfactant, it is compatible with other anionic and nonionic surfactants. With cationic surfactants, water-insoluble neutral salts are formed. Hostapal® BV conc. is resistant to caustic soda and water hardness. It acts as a lime soap dispersant and has high dispersing power for water-insoluble substances. In mineral acid solutions at elevated temperatures, Hostapal® BV conc. like all ether sulfates tends to hydrolyse. Hostapal® BV conc. is used as an emulsifier in the polymerization of the following monomers: vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene; for acrylic and styrene / acrylic dispersions; for butadiene / styrene latex. Hostapal® BV conc. is also employed as an emulsifier for oils and organic solvents and as a dispersing agent for inorganic and organic pigments such as titanium dioxide, iron oxides, metal pigments, polycylcic organic pigments and metal complex pigments. view less | |
| Hostaphat® 1306 | Clariant - Coatings & Construction Chemicals | Hostaphat® 1306 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used in the following applications: as emulsifier in emulsion ...view more Hostaphat® 1306 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used in the following applications: as emulsifier in emulsion polymerization, 0,5 – 1,5 % on monomers; as dispersing agent for pigments in aqueous dispersions, 10 – 30 % on pigments; and as wetting agent and detergents in vehicle and metal cleaning and textile finishing processes, general recommendation: 1 – 3 g/l. view less | |
| Hostaphat® 1308 K | Clariant - Coatings & Construction Chemicals | Hostaphat® 1308 K is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used as an emulsifier in emulsion polymerization. | |
| Hostapur® OS Liquid | Clariant - Coatings & Construction Chemicals | Hostapur® OS Liquid is an anionic surfactant for industrial applications. This yellowish liquid is compatible with nonionic and anionic surfactants, and it is readily biodegradable. Hostapur® OS liquid has strong wetting, cleaning and foaming characterist...view more Hostapur® OS Liquid is an anionic surfactant for industrial applications. This yellowish liquid is compatible with nonionic and anionic surfactants, and it is readily biodegradable. Hostapur® OS liquid has strong wetting, cleaning and foaming characteristics. The foam quality is excellent with high stability. It is used in the production of detergents and cleaning agents. It is particularly suitable for the use in foam cleaners for upholstery and carpets, because of the low stickiness of the residues left on the fiber. Hostapur® OS liquid is also used in the textile, leather and construction industry as a wetting agent, detergent and foaming agent. It is used as an emulsifier in emulsion polymerization of styrene / butadiene latex, styrene / butadiene rubber and acrylate and styrene / acrylate dispersions. view less | |
| Hostapur® OSB | Clariant - Coatings & Construction Chemicals | Hostapur® OSB is an anionic surfactant for industrial applications. This fine, slightly yellowish powder is readily biodegradable. Hostapur® OSB has a strong wetting and cleaning action and good foaming power. The foam quality is excellent, with high stab...view more Hostapur® OSB is an anionic surfactant for industrial applications. This fine, slightly yellowish powder is readily biodegradable. Hostapur® OSB has a strong wetting and cleaning action and good foaming power. The foam quality is excellent, with high stability. This product is used for the production of detergent and cleaning agent powders. Because of its low stickiness, Hostapur® OSB is particularly suitable for use in foam cleaners for upholstery and carpets. Hostapur® OSB is also used in the textile, leather and construction industries as a wetting agent, detergent and foaming agent. view less | |
| KBE-1003 | Shin-Etsu Silicones of America | KBE-1003 (CH2=CH-Si (OCH2CH3)3, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBE-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatly...view more KBE-1003 (CH2=CH-Si (OCH2CH3)3, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBE-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatly enhances the structural reinforcement of glass fibers or minerals in filled systems, and it provides good interfacial adhesion to many different substrates such as glass, metals, and ceramics. view less | |
| KBE-585 | Shin-Etsu Silicones of America | KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significa...view more KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBE-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBE-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less | |
| KBE-9007 | Shin-Etsu Silicones of America | KBE-9007, 3-isocyanatopropyltriethoxysilane, is a di-functional silane coupling agent that imparts improved performance to many diverse systems (elastomers, resins, composites, etc.) and applications (primers, paints, coatings, sealants, molded parts, etc...view more KBE-9007, 3-isocyanatopropyltriethoxysilane, is a di-functional silane coupling agent that imparts improved performance to many diverse systems (elastomers, resins, composites, etc.) and applications (primers, paints, coatings, sealants, molded parts, etc.). The isocyanato group readily reacts with several common organic functional groups such as hydroxyl, carboxyl, amino, and mercapto. The three hydrolytically sensitive ethoxy groups not only react with water but also form strong covalent bonds to a wide variety of inorganic and metallic surfaces. As a result, KBE-9007 is a useful modifier for many different materials, providing excellent adhesion to different surfaces (glass, glass fibers, ceramics, silicas, metals, composites, etc.), moisture-sensitive crosslinking capabilities, and other improved physical properties as well. view less | |
| KBE-903 | Shin-Etsu Silicones of America | KBE-903 (3-aminopropyltriethoxysilane) is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, glass fibers and elastomers. KBE-903 has been utilized in many different materials incl...view more KBE-903 (3-aminopropyltriethoxysilane) is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, glass fibers and elastomers. KBE-903 has been utilized in many different materials including thermosets, thermoplastics, and elastomers such as acrylics, epoxies, phenolics, melamines, urethanes, polycarbonates, polyesters, nylons, polystyrenes, PET, PBT, ABS, polysulfides, and silicones. In the majority of these applications, the use of KBE-903 leads to exceptionally strong interaction between the inorganic and organic components of a given system. For example, KBE-903 is commonly used to improve the performance of silica or glass fiber reinforced materials. It can improve many properties such as adhesion to a wide variety of substrates like glass, ceramics, and metals; flexural, compressive, tensile, and interlaminar shear strengths; pigment and filler wetting and dispersion; as well as hydrolytic stability and long term performance during and after exposure to moisture. view less | |
| KBE-9103 | Shin-Etsu Silicones of America | KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9...view more KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9103 is a protected amine that does not react with most epoxides, acidic groups, or phenols. However, in the presence of moisture, the ketimine functional group readily generates a free primary amine that will react with epoxides, acidic groups, and phenols. The latent reactivity of this protected amine makes KBE-9103 an ideal coupling agent for many one-component systems in which exposure to ambient moisture quickly and easily provides a highly reactive coupling agent. view less | |
| KBM-1003 | Shin-Etsu Silicones of America | KBM-1003, vinyltrimethoxysilane, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBM-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatl...view more KBM-1003, vinyltrimethoxysilane, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBM-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatly enhances the structural reinforcement of glass fibers or minerals in filled systems, and it provides good interfacial adhesion to many different substrates such as glass, metals, and ceramics. For example, KBM-1003 can be incorporated into acrylic systems as a comonomer or into polyethylene systems by radically init iated grafting. The functional copolymers produced by these types of methods can have very different properties and uses from their non-silane containing analogs, such as low molecular weight liquid oligomers or moderate molecular weight polymers that crosslink upon exposure to moisture or that have significantly enhanced adhesion to inorganic and metallic surfaces. view less | |
| KBM-303 | Shin-Etsu Silicones of America | KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water res...view more KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-303 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| KBM-3033 | Shin-Etsu Silicones of America | KBM-3033 has been developed as an economical surface active silane for use as a high performance coating agent, providing the combined benefits of hydrophobicity, low surface energy, and superior adhesion. Due to their inherently low surface energies, sil...view more KBM-3033 has been developed as an economical surface active silane for use as a high performance coating agent, providing the combined benefits of hydrophobicity, low surface energy, and superior adhesion. Due to their inherently low surface energies, silicones and silanes are often used as coatings or coating additives to impart weather resistance, chemical resistance, water-repellency, oil-repellency, and/or release properties. In particular, silicones and silanes with hydrolyzable and/or other reactive functional groups offer significant advantages and superior performance in many material systems where good adhesion, durability, longevity, and ease of application are important. view less | |
| KBM-403 | Shin-Etsu Silicones of America | KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water res...view more KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-403 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| KBM-503 | Shin-Etsu Silicones of America | KBM-503, 3-methacryloxypropyltrimethoxysilane, is a di-functional silane coupling agent having a reactive acrylic group as well as three hydrolyzable methoxy groups. It is a useful modifier for many high performance products including optical fibers, acry...view more KBM-503, 3-methacryloxypropyltrimethoxysilane, is a di-functional silane coupling agent having a reactive acrylic group as well as three hydrolyzable methoxy groups. It is a useful modifier for many high performance products including optical fibers, acrylics, epoxies, unsaturated polyester-fiberglass composites, and sol-gel composites. The reactive acrylic group can be copolymerized with many different unsaturated organic monomers such as vinyl monomers, organoacrylic monomers, styrene, or modified styrenes (copolymerization parameters e = 0.07, Q = 2.7). This yields polymers bearing pendant trimethoxysilyl groups, which can serve several different purposes. These groups can render a system cross-linkable upon exposure to water such as atmospheric moisture or steam. The pendant trimethoxysilyl groups can also improve the physical properties of composites by enabling the organic polymer to bond directly with the inorganic filler. Furthermore, these pendant trimethoxysilyl groups can dramatically improve the adhesion of organic polymers to many inorganic and metallic substrates. view less | |
| KBM-5103 | Shin-Etsu Silicones of America | KBM-5103, 3-acryloxypropyltrimethoxysilane, is a novel silane coupling agent having a highly reactive acrylic group. It is a useful modifier for many high performance products including optical fibers, acrylics, epoxies, and composites. When compared to S...view more KBM-5103, 3-acryloxypropyltrimethoxysilane, is a novel silane coupling agent having a highly reactive acrylic group. It is a useful modifier for many high performance products including optical fibers, acrylics, epoxies, and composites. When compared to Shin-Etsu’s KBM-503, methacryloxypropyltrimethoxy-silane, KBM-5103 is a significantly more reactive monomer. For example, thermosetting resin products reinforced by fiber or cloth treated with KBM-5103 have significantly improved mechanical and electrical properties. KBM-5103 is also especially effective in UV cured systems. view less | |
| KBM-573 | Shin-Etsu Silicones of America | KBM-573, N-phenyl-3-aminopropyltrimethoxysilane), is a specialty silane coupling agent that significantly improves the performance of many composite materials in more demanding applications. KBM-573 provides many of the same benefits for which aminosilane...view more KBM-573, N-phenyl-3-aminopropyltrimethoxysilane), is a specialty silane coupling agent that significantly improves the performance of many composite materials in more demanding applications. KBM-573 provides many of the same benefits for which aminosilanes are well known. When used as an additive for thermoplastics and thermosets, KBM-573 dramatically improves the dispersion of fillers, lowers viscosities, and positively impacts other aspects of processing the uncured composite. Upon curing, it creates strong covalent bonds between the inorganic and organic components within the composite and it provides superior adhesion of the composite to many different substrates. However, when compared to more common aminoalkylsilanes, such as Shin-Etsu KBM-603 or KBM-903, the phenyl ring of KBM-573 leads to significantly enhanced thermal stability and better organic compatibility in many systems. view less | |
| KBM-585 | Shin-Etsu Silicones of America | KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosil...view more KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosilanes, the ureido group of KBM-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBM-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBM-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less | |
| KBM-602 | Shin-Etsu Silicones of America | KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics...view more KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics, epoxies, phenolics, melamines, polyurethanes, polycarbonates, polyesters, nylons, polystyrenes, PVC, PET, PBT, ABS, and silicones. KBM-602 is most often used to improve strength, flexibility, and adhesion due to its ability to create exceptionally strong interactions between inorganic and organic components of a given system. Additional advantages may include improved processing (improvements in viscosity and other flow characteristics, improved compatibility of composite components and reduced energy consumption, better filler dispersion, the ability to increase the ratio of filler to resin, and improved resistance to chemicals and moisture. view less | |
| KBM-603 | Shin-Etsu Silicones of America | KBM-603, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane), is a diamino-functional silane with applications in composites, coatings, adhesives, and sealants. KBM-603 has been used in a wide variety of advanced thermosets, thermoplastics, and elastomers in...view more KBM-603, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane), is a diamino-functional silane with applications in composites, coatings, adhesives, and sealants. KBM-603 has been used in a wide variety of advanced thermosets, thermoplastics, and elastomers including acrylics, cellulosics, epoxies, phenolics, melamines, polyurethanes, polyureas, polycarbonates, polyesters, polyethers, nylons, polystyrenes, PVC, PET, PBT, ABS, and silicones. KBM-603 is used extensively to promote strong and durable adhesion to materials such as glass, ceramics, and metals. This adhesion is a result of the silane’s ability to create exceptionally strong interactions (such as covalent bonding and hydrogen bonding) between the inorganic and organic components of a system. KBM-603 is often used to improve flexural, compressive, and interlaminar shear strengths as well as adhesion in many filled systems such as mineral and glass-reinforced thermosets and thermoplastics. view less | |
| KBM-903 | Shin-Etsu Silicones of America | KBM-903, 3-aminopropyltrimethoxysilane, is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, and elastomers. Similar in structure and function to Shin-Etsu’s KBE-903, 3-aminopropy...view more KBM-903, 3-aminopropyltrimethoxysilane, is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, and elastomers. Similar in structure and function to Shin-Etsu’s KBE-903, 3-aminopropyltriethoxysilane, the three hydrolyzable methoxy groups of KBM-903 are slightly more reactive than the three ethoxy groups of KBE-903. As such, this product may lead to improved interaction between the inorganic and organic components of some systems. If a longer shelf life or another aspect of increased hydrolytic stability is critical to a given application, KBE-903 may be more suitable. In most applications, this product is an appropriate replacement for KBE-903 and has the added benefit of lower weight loss upon hydrolysis. view less | |
| KBM-974 | Shin-Etsu Silicones of America | KBM-974 is a type silane in methanol that has superior water solution stability than conventional vinylbenzylamino silanes like KBM-575. The reactivity and compatibility of this polyfunctional alkoxysilane product makes it an ideal candidate to improve th...view more KBM-974 is a type silane in methanol that has superior water solution stability than conventional vinylbenzylamino silanes like KBM-575. The reactivity and compatibility of this polyfunctional alkoxysilane product makes it an ideal candidate to improve the properties of many different materials. For example, KBM-974 signif icantly improves the flexural and tensile strengths of glass fiber composites, especially in applications involving long-term exposure to water and high humidity. KBM-974 improves the chemical bonding between inorganic fillers and organic resins and the adhesion of composites and organic polymers to inorganic surfaces. Diluted solutions of KBM-974 are useful primers for bonding organic materials to inorganic surfaces. Similar to other silane coupling agents, formulations containing KBM-974 often demonstrate better processing characteristics. KBM-974 is an especially effective coupling agent and dispersing aid in thermoset composites such as epoxies, unsaturated polyesters, and polyimides, and works well in mineral-filled thermoplastics such as polypropylene, polybutyleneterephthalate, PVC, nylons, and polycarbonates. It is an ideal choice for many electronics applications because of its excellent head resistance to solder. view less | |
| KBP-90-40 | Shin-Etsu Silicones of America | KBP-90-40 is a high solids content primary aminoalkyl silane oligomer in aqueous solution. It is ready to use, and also depolymerizes to mostly monomer upon dilution of water. This product can be used as an additive for adhesives, sealants, coatings, fibe...view more KBP-90-40 is a high solids content primary aminoalkyl silane oligomer in aqueous solution. It is ready to use, and also depolymerizes to mostly monomer upon dilution of water. This product can be used as an additive for adhesives, sealants, coatings, fiberglass, filler treatments, and more. view less | |
| Monoethylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals | Monoethylene Glycol Dimethyl Ether is a clear, colorless liquid and volatile liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and most common solvents in any ratio. As a result of its ch...view more Monoethylene Glycol Dimethyl Ether is a clear, colorless liquid and volatile liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and most common solvents in any ratio. As a result of its chemical stability and the absence of reactive groups, Monoethylene glycol dimethyl ether can be used as an inert reaction medium for many organic and organometallic reactions (e.g. Suzuki-coupling, Simmons-Smith-reactions, Grignard reactions) and for polymerizations. Because of its aprotic nature and low viscosity 1,2-Dimethyoxyethane is also used as electrolytic solvent for lithium batteries (in combination with other solvents). view less | |
| Polon MF-56 Silicone Water Repellent | Shin-Etsu Silicones of America | Polon MF-56 Silicone Water Repellent is a silicone emulsion that produces high performance water repellent coatings and has good compatibility with and good adhesion to a variety of surfaces (wood, concrete, composites, organic polymers, ceramics, glass, ...view more Polon MF-56 Silicone Water Repellent is a silicone emulsion that produces high performance water repellent coatings and has good compatibility with and good adhesion to a variety of surfaces (wood, concrete, composites, organic polymers, ceramics, glass, etc.). Polon MF-56 cures to a tough elastomeric polysiloxane film, and yields a transparent coating that displays immediate and long-lasting beading as well as water repellency that improves significantly with weathering. view less | |
| Polyglycol AB/25-8 | Clariant - Coatings & Construction Chemicals | Polyglycol AB/25-8 is a colorless to slightly yellow, viscous, non-toxic liquid with a mild odor. It is a statistical copolymer of about 25 moles EO and 8 moles PO with allyl and butyl endcapping. | |
| Polyglycol AM 250 | Clariant - Coatings & Construction Chemicals | Polyglycol AM 250 is ethoxylated and end capped with an allyl and a methyl group. It is a low-viscous liquid. | |
| Polyglycol BB 300 | Clariant - Coatings & Construction Chemicals | Polyglycol BB 300 is a clear, neutral, colorless to light yellowish liquid with a characteristic odor. It is miscible with ethanol, acetone, benzene, ether and chlorinated hydrocarbons in any ratio and forms a clear solution. Polyglycol BB 300 has a high ...view more Polyglycol BB 300 is a clear, neutral, colorless to light yellowish liquid with a characteristic odor. It is miscible with ethanol, acetone, benzene, ether and chlorinated hydrocarbons in any ratio and forms a clear solution. Polyglycol BB 300 has a high boiling point, relatively low freezing range and low viscosity. view less | |
| Polyglykol 1000 | Clariant - Coatings & Construction Chemicals | Polyglykol 1000 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutic...view more Polyglykol 1000 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1000 is a white waxy solid at room temperature. Its two hydroxy end groups as well as its ether groups mainly control the physical and chemical properties of Polyglykol 1000. view less | |
| Polyglykol 10000 FL | Clariant - Coatings & Construction Chemicals | Polyglykol 10000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmace...view more Polyglykol 10000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 FL can be supplied as melt in heated tank trucks, and it has a molecular weight of 9000-11250g/mol. This grade melt also has to be stored under a nitrogen blanket at 60-80°C. Storage time of the melt shall not exceed 2-3 month. This product is also available as Polyglykol 10000 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. view less | |
| Polyglykol 10000 P | Clariant - Coatings & Construction Chemicals | Polyglykol 10000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...view more Polyglykol 10000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 P is a powdered type, and it has a molecular weight of 9000-11250g/mol. view less | |
| Polyglykol 10000 S | Clariant - Coatings & Construction Chemicals | Polyglykol 10000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...view more Polyglykol 10000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 S is a flaked type, and it has a molecular weight of 9000-11250g/mol. view less | |
| Polyglykol 12000 S | Clariant - Coatings & Construction Chemicals | Polyglykol 12000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...view more Polyglykol 12000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 12000 S is a flaked type. view less | |
| Polyglykol 1500 FL | Clariant - Coatings & Construction Chemicals | Polyglykol 1500 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...view more Polyglykol 1500 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL can be supplied in heated tank trucks. This product is also available as Polyglykol 1500 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. view less | |
| Polyglykol 1500 FL PU | Clariant - Coatings & Construction Chemicals | Polyglykol 1500 FL PU is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharma...view more Polyglykol 1500 FL PU is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL PU can be supplied in heated tank trucks. view less | |
| Polyglykol 1500 PS | Clariant - Coatings & Construction Chemicals | Polyglykol 1500 PS is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...view more Polyglykol 1500 PS is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 PS can be supplied in heated tank trucks. view less |
