| 3M™ Ceramic Microspheres W-210 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M c...view more 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-210 are typically chosen over other 3M ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-410 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler load...view more 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-410 are typically chosen over other 3M ceramic microspheres for their overall balance in properties. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-610 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic m...view more 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-610 are typically chosen over other 3M ceramic microspheres for increased durability. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Fluorosurfactant FC-4430 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4430 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product can provide stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4432 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4432 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4434 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4434 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Glass Bubbles iM16K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles iM30K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K1 | 3M Advanced Materials Division | 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K15 | 3M Advanced Materials Division | 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K20 | 3M Advanced Materials Division | 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K25 | 3M Advanced Materials Division | 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K37 | 3M Advanced Materials Division | 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K42HS | 3M Advanced Materials Division | 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K46 | 3M Advanced Materials Division | 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S15 | 3M Advanced Materials Division | 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S22 | 3M Advanced Materials Division | 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S28HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S32 | 3M Advanced Materials Division | 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S35 | 3M Advanced Materials Division | 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38 | 3M Advanced Materials Division | 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush streng...view more 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S42XHS | 3M Advanced Materials Division | 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60 | 3M Advanced Materials Division | 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles XLD3000 | 3M Advanced Materials Division | 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...view more 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-250 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product pe...view more 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-250 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-250 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-270 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The ...view more 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-270 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-270 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-450 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the...view more 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-450 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-450 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-451 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates th...view more 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-451 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-451 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive SRC-220 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product...view more 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRC-220 offers durability, long-lasting performance and UV resistance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRC-220 is easy to incorporate into existing water and some solvent-based products and can be added to existing formulations or diluted with water or water miscible solvents and used as a stand-alone sealer. view less | |
| Easy Clean Coatings 1000 | 3M Advanced Materials Division | 3M™ Easy Clean Coating ECC-1000 is a fluoropolymer solution used for coating ceramic, glass and other non-porous surfaces. Once applied, the result is an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time...view more 3M™ Easy Clean Coating ECC-1000 is a fluoropolymer solution used for coating ceramic, glass and other non-porous surfaces. Once applied, the result is an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time between cleanings. view less | |
| Easy Clean Coatings 4000 | 3M Advanced Materials Division | 3M™ Easy Clean Coating ECC-4000 is a fluoropolymer used for coating ceramic and glass surfaces. Once it air-dries, it provides an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time between cleanings. | |
| Easy Clean Coatings 6000 | 3M Advanced Materials Division | 3M™ Easy Clean Coating ECC-6000 is a fluoropolymer solution used for coating non-porous ceramic, glass or metal oxide surfaces. Once it bonds with a substrate, it provides an “easy-to-clean” surface that resists staining, hard water deposits and soils, he...view more 3M™ Easy Clean Coating ECC-6000 is a fluoropolymer solution used for coating non-porous ceramic, glass or metal oxide surfaces. Once it bonds with a substrate, it provides an “easy-to-clean” surface that resists staining, hard water deposits and soils, helping extend the time between cleanings. view less | |
| KBE-1003 | Shin-Etsu Silicones of America | KBE-1003 (CH2=CH-Si (OCH2CH3)3, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBE-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatly...view more KBE-1003 (CH2=CH-Si (OCH2CH3)3, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBE-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatly enhances the structural reinforcement of glass fibers or minerals in filled systems, and it provides good interfacial adhesion to many different substrates such as glass, metals, and ceramics. view less | |
| KBE-585 | Shin-Etsu Silicones of America | KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significa...view more KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBE-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBE-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less | |
| KBE-9007 | Shin-Etsu Silicones of America | KBE-9007, 3-isocyanatopropyltriethoxysilane, is a di-functional silane coupling agent that imparts improved performance to many diverse systems (elastomers, resins, composites, etc.) and applications (primers, paints, coatings, sealants, molded parts, etc...view more KBE-9007, 3-isocyanatopropyltriethoxysilane, is a di-functional silane coupling agent that imparts improved performance to many diverse systems (elastomers, resins, composites, etc.) and applications (primers, paints, coatings, sealants, molded parts, etc.). The isocyanato group readily reacts with several common organic functional groups such as hydroxyl, carboxyl, amino, and mercapto. The three hydrolytically sensitive ethoxy groups not only react with water but also form strong covalent bonds to a wide variety of inorganic and metallic surfaces. As a result, KBE-9007 is a useful modifier for many different materials, providing excellent adhesion to different surfaces (glass, glass fibers, ceramics, silicas, metals, composites, etc.), moisture-sensitive crosslinking capabilities, and other improved physical properties as well. view less | |
| KBE-903 | Shin-Etsu Silicones of America | KBE-903 (3-aminopropyltriethoxysilane) is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, glass fibers and elastomers. KBE-903 has been utilized in many different materials incl...view more KBE-903 (3-aminopropyltriethoxysilane) is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, glass fibers and elastomers. KBE-903 has been utilized in many different materials including thermosets, thermoplastics, and elastomers such as acrylics, epoxies, phenolics, melamines, urethanes, polycarbonates, polyesters, nylons, polystyrenes, PET, PBT, ABS, polysulfides, and silicones. In the majority of these applications, the use of KBE-903 leads to exceptionally strong interaction between the inorganic and organic components of a given system. For example, KBE-903 is commonly used to improve the performance of silica or glass fiber reinforced materials. It can improve many properties such as adhesion to a wide variety of substrates like glass, ceramics, and metals; flexural, compressive, tensile, and interlaminar shear strengths; pigment and filler wetting and dispersion; as well as hydrolytic stability and long term performance during and after exposure to moisture. view less | |
| KBE-9103 | Shin-Etsu Silicones of America | KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9...view more KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9103 is a protected amine that does not react with most epoxides, acidic groups, or phenols. However, in the presence of moisture, the ketimine functional group readily generates a free primary amine that will react with epoxides, acidic groups, and phenols. The latent reactivity of this protected amine makes KBE-9103 an ideal coupling agent for many one-component systems in which exposure to ambient moisture quickly and easily provides a highly reactive coupling agent. view less | |
| KBM-1003 | Shin-Etsu Silicones of America | KBM-1003, vinyltrimethoxysilane, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBM-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatl...view more KBM-1003, vinyltrimethoxysilane, is a vinyl-functional silane coupling agent. Widely used to modify organic polymers, KBM-1003 enables moisture-cured systems (filled and unfilled) that have significantly improved physical and thermal properties, it greatly enhances the structural reinforcement of glass fibers or minerals in filled systems, and it provides good interfacial adhesion to many different substrates such as glass, metals, and ceramics. For example, KBM-1003 can be incorporated into acrylic systems as a comonomer or into polyethylene systems by radically init iated grafting. The functional copolymers produced by these types of methods can have very different properties and uses from their non-silane containing analogs, such as low molecular weight liquid oligomers or moderate molecular weight polymers that crosslink upon exposure to moisture or that have significantly enhanced adhesion to inorganic and metallic surfaces. view less | |
| KBM-303 | Shin-Etsu Silicones of America | KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water res...view more KBM-303 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-303 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| KBM-3033 | Shin-Etsu Silicones of America | KBM-3033 has been developed as an economical surface active silane for use as a high performance coating agent, providing the combined benefits of hydrophobicity, low surface energy, and superior adhesion. Due to their inherently low surface energies, sil...view more KBM-3033 has been developed as an economical surface active silane for use as a high performance coating agent, providing the combined benefits of hydrophobicity, low surface energy, and superior adhesion. Due to their inherently low surface energies, silicones and silanes are often used as coatings or coating additives to impart weather resistance, chemical resistance, water-repellency, oil-repellency, and/or release properties. In particular, silicones and silanes with hydrolyzable and/or other reactive functional groups offer significant advantages and superior performance in many material systems where good adhesion, durability, longevity, and ease of application are important. view less | |
| KBM-403 | Shin-Etsu Silicones of America | KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water res...view more KBM-403 is an epoxy functional methoxysilane that is used in many different types of applications including primers, adhesion promoters, scratch resistant coatings, encapsulants, and gaskets. This coupling agent improves the mechanical strength, water resistance, and heat resistance of complex materials containing inorganic fillers and organic polymers. It is suitable for a wide variety of heat curable systems like epoxies, phenolics, melamines, and urethanes, as well as thermoplastic elastomers like polycarbonate, nylon, polystyrene, PET, PBT, and ABS. Epoxysilanes have replaced aminosilanes in several applications, resulting in significantly improved performance. KBM-403 works well with most of the common inorganic substrates such as glass, silica, mica, alumina, clay, and talc, as well as most metals, such as iron and copper. view less | |
| KBM-503 | Shin-Etsu Silicones of America | KBM-503, 3-methacryloxypropyltrimethoxysilane, is a di-functional silane coupling agent having a reactive acrylic group as well as three hydrolyzable methoxy groups. It is a useful modifier for many high performance products including optical fibers, acry...view more KBM-503, 3-methacryloxypropyltrimethoxysilane, is a di-functional silane coupling agent having a reactive acrylic group as well as three hydrolyzable methoxy groups. It is a useful modifier for many high performance products including optical fibers, acrylics, epoxies, unsaturated polyester-fiberglass composites, and sol-gel composites. The reactive acrylic group can be copolymerized with many different unsaturated organic monomers such as vinyl monomers, organoacrylic monomers, styrene, or modified styrenes (copolymerization parameters e = 0.07, Q = 2.7). This yields polymers bearing pendant trimethoxysilyl groups, which can serve several different purposes. These groups can render a system cross-linkable upon exposure to water such as atmospheric moisture or steam. The pendant trimethoxysilyl groups can also improve the physical properties of composites by enabling the organic polymer to bond directly with the inorganic filler. Furthermore, these pendant trimethoxysilyl groups can dramatically improve the adhesion of organic polymers to many inorganic and metallic substrates. view less | |
| KBM-5103 | Shin-Etsu Silicones of America | KBM-5103, 3-acryloxypropyltrimethoxysilane, is a novel silane coupling agent having a highly reactive acrylic group. It is a useful modifier for many high performance products including optical fibers, acrylics, epoxies, and composites. When compared to S...view more KBM-5103, 3-acryloxypropyltrimethoxysilane, is a novel silane coupling agent having a highly reactive acrylic group. It is a useful modifier for many high performance products including optical fibers, acrylics, epoxies, and composites. When compared to Shin-Etsu’s KBM-503, methacryloxypropyltrimethoxy-silane, KBM-5103 is a significantly more reactive monomer. For example, thermosetting resin products reinforced by fiber or cloth treated with KBM-5103 have significantly improved mechanical and electrical properties. KBM-5103 is also especially effective in UV cured systems. view less | |
| KBM-573 | Shin-Etsu Silicones of America | KBM-573, N-phenyl-3-aminopropyltrimethoxysilane), is a specialty silane coupling agent that significantly improves the performance of many composite materials in more demanding applications. KBM-573 provides many of the same benefits for which aminosilane...view more KBM-573, N-phenyl-3-aminopropyltrimethoxysilane), is a specialty silane coupling agent that significantly improves the performance of many composite materials in more demanding applications. KBM-573 provides many of the same benefits for which aminosilanes are well known. When used as an additive for thermoplastics and thermosets, KBM-573 dramatically improves the dispersion of fillers, lowers viscosities, and positively impacts other aspects of processing the uncured composite. Upon curing, it creates strong covalent bonds between the inorganic and organic components within the composite and it provides superior adhesion of the composite to many different substrates. However, when compared to more common aminoalkylsilanes, such as Shin-Etsu KBM-603 or KBM-903, the phenyl ring of KBM-573 leads to significantly enhanced thermal stability and better organic compatibility in many systems. view less | |
| KBM-585 | Shin-Etsu Silicones of America | KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosil...view more KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosilanes, the ureido group of KBM-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBM-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBM-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less | |
| KBM-602 | Shin-Etsu Silicones of America | KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics...view more KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics, epoxies, phenolics, melamines, polyurethanes, polycarbonates, polyesters, nylons, polystyrenes, PVC, PET, PBT, ABS, and silicones. KBM-602 is most often used to improve strength, flexibility, and adhesion due to its ability to create exceptionally strong interactions between inorganic and organic components of a given system. Additional advantages may include improved processing (improvements in viscosity and other flow characteristics, improved compatibility of composite components and reduced energy consumption, better filler dispersion, the ability to increase the ratio of filler to resin, and improved resistance to chemicals and moisture. view less | |
| KBM-603 | Shin-Etsu Silicones of America | KBM-603, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane), is a diamino-functional silane with applications in composites, coatings, adhesives, and sealants. KBM-603 has been used in a wide variety of advanced thermosets, thermoplastics, and elastomers in...view more KBM-603, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane), is a diamino-functional silane with applications in composites, coatings, adhesives, and sealants. KBM-603 has been used in a wide variety of advanced thermosets, thermoplastics, and elastomers including acrylics, cellulosics, epoxies, phenolics, melamines, polyurethanes, polyureas, polycarbonates, polyesters, polyethers, nylons, polystyrenes, PVC, PET, PBT, ABS, and silicones. KBM-603 is used extensively to promote strong and durable adhesion to materials such as glass, ceramics, and metals. This adhesion is a result of the silane’s ability to create exceptionally strong interactions (such as covalent bonding and hydrogen bonding) between the inorganic and organic components of a system. KBM-603 is often used to improve flexural, compressive, and interlaminar shear strengths as well as adhesion in many filled systems such as mineral and glass-reinforced thermosets and thermoplastics. view less | |
| KBM-903 | Shin-Etsu Silicones of America | KBM-903, 3-aminopropyltrimethoxysilane, is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, and elastomers. Similar in structure and function to Shin-Etsu’s KBE-903, 3-aminopropy...view more KBM-903, 3-aminopropyltrimethoxysilane, is one of the most versatile coupling agents, having a broad range of applications in composites, coatings, adhesives, sealants, and elastomers. Similar in structure and function to Shin-Etsu’s KBE-903, 3-aminopropyltriethoxysilane, the three hydrolyzable methoxy groups of KBM-903 are slightly more reactive than the three ethoxy groups of KBE-903. As such, this product may lead to improved interaction between the inorganic and organic components of some systems. If a longer shelf life or another aspect of increased hydrolytic stability is critical to a given application, KBE-903 may be more suitable. In most applications, this product is an appropriate replacement for KBE-903 and has the added benefit of lower weight loss upon hydrolysis. view less | |
| KBM-974 | Shin-Etsu Silicones of America | KBM-974 is a type silane in methanol that has superior water solution stability than conventional vinylbenzylamino silanes like KBM-575. The reactivity and compatibility of this polyfunctional alkoxysilane product makes it an ideal candidate to improve th...view more KBM-974 is a type silane in methanol that has superior water solution stability than conventional vinylbenzylamino silanes like KBM-575. The reactivity and compatibility of this polyfunctional alkoxysilane product makes it an ideal candidate to improve the properties of many different materials. For example, KBM-974 signif icantly improves the flexural and tensile strengths of glass fiber composites, especially in applications involving long-term exposure to water and high humidity. KBM-974 improves the chemical bonding between inorganic fillers and organic resins and the adhesion of composites and organic polymers to inorganic surfaces. Diluted solutions of KBM-974 are useful primers for bonding organic materials to inorganic surfaces. Similar to other silane coupling agents, formulations containing KBM-974 often demonstrate better processing characteristics. KBM-974 is an especially effective coupling agent and dispersing aid in thermoset composites such as epoxies, unsaturated polyesters, and polyimides, and works well in mineral-filled thermoplastics such as polypropylene, polybutyleneterephthalate, PVC, nylons, and polycarbonates. It is an ideal choice for many electronics applications because of its excellent head resistance to solder. view less | |
| KBP-90-40 | Shin-Etsu Silicones of America | KBP-90-40 is a high solids content primary aminoalkyl silane oligomer in aqueous solution. It is ready to use, and also depolymerizes to mostly monomer upon dilution of water. This product can be used as an additive for adhesives, sealants, coatings, fibe...view more KBP-90-40 is a high solids content primary aminoalkyl silane oligomer in aqueous solution. It is ready to use, and also depolymerizes to mostly monomer upon dilution of water. This product can be used as an additive for adhesives, sealants, coatings, fiberglass, filler treatments, and more. view less | |
| Polon MF-56 Silicone Water Repellent | Shin-Etsu Silicones of America | Polon MF-56 Silicone Water Repellent is a silicone emulsion that produces high performance water repellent coatings and has good compatibility with and good adhesion to a variety of surfaces (wood, concrete, composites, organic polymers, ceramics, glass, ...view more Polon MF-56 Silicone Water Repellent is a silicone emulsion that produces high performance water repellent coatings and has good compatibility with and good adhesion to a variety of surfaces (wood, concrete, composites, organic polymers, ceramics, glass, etc.). Polon MF-56 cures to a tough elastomeric polysiloxane film, and yields a transparent coating that displays immediate and long-lasting beading as well as water repellency that improves significantly with weathering. view less |
