| DOWSIL™ 100F Additive | Dow Performance Silicones | DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and...view more DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. view less | |
| DOWSIL™ 102F Additive | Dow Performance Silicones | DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cau...view more DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. view less | |
| DOWSIL™ 107F Additive | Dow Performance Silicones | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...view more DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. view less | |
| DOWSIL™ 108F Additive | Dow Performance Silicones | DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (V...view more DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. view less | |
| DOWSIL™ 11 Additive | Dow Performance Silicones | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | |
| DOWSIL™ 14 Additive | Dow Performance Silicones | DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol fun...view more DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. view less | |
| DOWSIL™ 163 Additive | Dow Performance Silicones | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | |
| DOWSIL™ 18 Additive | Dow Performance Silicones | DOWSIL™ 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones | DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolym...view more DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. view less | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | |
| DOWSIL™ 210S Additive | Dow Performance Silicones | DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enha...view more DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. view less | |
| DOWSIL™ 211S Additive | Dow Performance Silicones | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...view more DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. view less | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones | DOWSIL™ 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 2405 Resin | Dow Performance Silicones | DOWSIL™ 2405 Resin is a solvent-less methoxy functional, liquid siloxane. It can be used as a sole binder or in combination with other siloxanes such as DOWSIL™ US-CF-2403 Resin, in both clear and pigmented formulations. This product has limited compatibi...view more DOWSIL™ 2405 Resin is a solvent-less methoxy functional, liquid siloxane. It can be used as a sole binder or in combination with other siloxanes such as DOWSIL™ US-CF-2403 Resin, in both clear and pigmented formulations. This product has limited compatibility with organic binders. It is compatible with or soluble in classical solvents (butyl acetate or xylene). view less | |
| DOWSIL™ 27 Additive | Dow Performance Silicones | DOWSIL™ 27 Additive is a nonreactive silicone glycol surfactant with both silicone and organic characteristics. It is supplied as a 100% active fluid. This product may be incorporated into solvent, aqueous, solventless and energy curable systems. | |
| DOWSIL™ 29 Additive | Dow Performance Silicones | DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin ...view more DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 3 Additive | Dow Performance Silicones | DOWSIL™ 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | |
| DOWSIL™ 3037 Intermediate | Dow Performance Silicones | DOWSIL™ 3037 Intermediate is a silicone resin intermediate. It is used reacted with organic resins to improve weatherability, or other silicone resins to reduce VOC and improve flexibility. | |
| DOWSIL™ 3055 Resin | Dow Performance Silicones | DOWSIL™ 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crosslinker ...view more DOWSIL™ 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crosslinker to improve the physical properties and long-term performance of paints and coatings. view less | |
| DOWSIL™ 3074 Intermediate | Dow Performance Silicones | DOWSIL™ 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC h...view more DOWSIL™ 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC high temperature coatings. view less | |
| DOWSIL™ 33 Additive | Dow Performance Silicones | DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases...view more DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. view less | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones | DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formul...view more DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...view more DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones | DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coa...view more DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 500W Additive | Dow Performance Silicones | DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 501W Additive | Dow Performance Silicones | DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 502W Additive | Dow Performance Silicones | DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 51 Additive | Dow Performance Silicones | DOWSIL™ 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones | DOWSIL™ 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 54 Additive | Dow Performance Silicones | DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen ...view more DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen printing inks. view less | |
| DOWSIL™ 55 Additive | Dow Performance Silicones | DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, a...view more DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. view less | |
| DOWSIL™ 56 Additive | Dow Performance Silicones | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | |
| DOWSIL™ 57 Additive | Dow Performance Silicones | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | |
| DOWSIL™ 61 Paint Additive | Dow Performance Silicones | DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each produ...view more DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone view less | |
| DOWSIL™ 62 Additive | Dow Performance Silicones | DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with l...view more DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with low tendency to cause defects or affect coating gloss. view less | |
| DOWSIL™ 67 Additive | Dow Performance Silicones | DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective ...view more DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 68 Additive | Dow Performance Silicones | DOWSIL™ 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 700P Additive | Dow Performance Silicones | DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of p...view more DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. view less | |
| DOWSIL™ 71 Additive | Dow Performance Silicones | DOWSIL™ 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. | |
| DOWSIL™ 74 Additive | Dow Performance Silicones | DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stabil...view more DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. view less | |
| DOWSIL™ 84 Additive | Dow Performance Silicones | DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and ...view more DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 85 Additive | Dow Performance Silicones | DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven...view more DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones | DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent i...view more DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion p...view more DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...view more DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. view less | |
| DOWSIL™ 8603 Additive | Dow Performance Silicones | DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene e...view more DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. view less | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 87 Additive | Dow Performance Silicones | DOWSIL™ 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones | DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings a...view more DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. view less | |
| DOWSIL™ RSN-0217 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0217 Flake Resin is a 100% phenyl silicone, silanol-functional flake for use as a binder for powder and liquid coatings. It offers good thermal stability, good weatherability, and good compatibility with organic resins. | |
| DOWSIL™ RSN-0220 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0220 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers good heat stability and weatherability, and can also be used to reduce VOC and improve film properties. | |
| DOWSIL™ RSN-0233 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0233 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It is used primarily as a powder coating binder or co-binder to improve heat stability and weatherability, in high temperature co...view more DOWSIL™ RSN-0233 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It is used primarily as a powder coating binder or co-binder to improve heat stability and weatherability, in high temperature coatings where initial hardness and hot hardness are desired, as a blending resin with other silicone resins to improve hardness, and as a blending resin in solvent-based organic coatings to improve film properties. view less | |
| DOWSIL™ RSN-0249 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0249 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers excellent heat stability and good weatherability. | |
| DOWSIL™ RSN-0255 Flake Resin | Dow Performance Silicones | DOWSIL™ RSN-0255 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers excellent heat stability and good weatherability. | |
| DOWSIL™ RSN-0409 HS Resin | Dow Performance Silicones | DOWSIL™ RSN-0409 HS Resin is an 80% solids, silanol-functional silicone resin for use in liquid coatings. It offers excellent heat stability and good weatherability. This product is chemically similar to DOWSIL™ RSN-0805 Resin. | |
| DOWSIL™ RSN-0431 HS Resin | Dow Performance Silicones | DOWSIL™ RSN-0431 HS Resin is an 80% solids, silanol-functional silicone resin for use in liquid coatings. It offers good heat stability and weatherability. This product is chemically similar to DOWSIL™ RSN-0840 Resin. | |
| DOWSIL™ RSN-0804 Resin | Dow Performance Silicones | DOWSIL™ RSN-0804 Resin is a silanol-functional resin supplied as a solvent solution. It offers excellent leafing properties and water resistance, very good gloss retention, and improves heat stability and weatherability of many organic resins. | |
| DOWSIL™ RSN-0805 Resin | Dow Performance Silicones | DOWSIL™ RSN-0805 Resin is a silanol-functional resin supplied as a solvent solution. It is intended for use primarily with metallic pigments in applications including maintenance paints, colored baking enamels and decorative finishes. DOWSIL™ RSN-0805 Res...view more DOWSIL™ RSN-0805 Resin is a silanol-functional resin supplied as a solvent solution. It is intended for use primarily with metallic pigments in applications including maintenance paints, colored baking enamels and decorative finishes. DOWSIL™ RSN-0805 Resin can be used alone or blended with DOWSIL™ RSN-0806 Resin to increase film hardness. view less | |
| DOWSIL™ RSN-0806 Resin | Dow Performance Silicones | DOWSIL™ RSN-0806 Resin is a silanol-functional resin for use in colored baking enamels for space heaters and stoves. It is stable and offers high-temperature performance. This product can be used alone or blended with other silicone resins, such as DOWSIL...view more DOWSIL™ RSN-0806 Resin is a silanol-functional resin for use in colored baking enamels for space heaters and stoves. It is stable and offers high-temperature performance. This product can be used alone or blended with other silicone resins, such as DOWSIL™ RSN-0805 Resin to enhance flexibility. view less | |
| DOWSIL™ RSN-0808 Resin | Dow Performance Silicones | DOWSIL™ RSN-0808 Resin is a silanol-functional silicon resin in xylene. It offers excellent flexibility, gloss retention, color retention, corrosion resistance, good heat resistance, weatherability, and useful leafing properties with metallic pigmented pa...view more DOWSIL™ RSN-0808 Resin is a silanol-functional silicon resin in xylene. It offers excellent flexibility, gloss retention, color retention, corrosion resistance, good heat resistance, weatherability, and useful leafing properties with metallic pigmented paints. view less | |
| DOWSIL™ RSN-0840 Resin | Dow Performance Silicones | DOWSIL™ RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing DOWSIL™ RSN-0840 Resin can give extremely high temperature prote...view more DOWSIL™ RSN-0840 Resin is a silanol-functional silicone resin in toluene. It offers excellent leafing properties and water resistance, as well as very good gloss retention. Paints containing DOWSIL™ RSN-0840 Resin can give extremely high temperature protection over short periods. This produces improves moisture resistance, heat stability, and weatherability of many organic resins. It also functions as a leveling agent to improve the surface appearance of organic protective coatings. view less | |
| DOWSIL™ RSN-6018 Resin Intermediate | Dow Performance Silicones | DOWSIL™ RSN-6018 Resin Intermediate is a silicone intermediate for colored and high-temperature finishes. It is a silanol-functional, low-molecular-weight silicone intermediate that reacts with a wide variety of organic resins and monomers. Resins modifie...view more DOWSIL™ RSN-6018 Resin Intermediate is a silicone intermediate for colored and high-temperature finishes. It is a silanol-functional, low-molecular-weight silicone intermediate that reacts with a wide variety of organic resins and monomers. Resins modified with this product show improved heat stability and weatherability over unmodified resins. view less | |
| DOWSIL™ US-CF 2403 Resin | Dow Performance Silicones | DOWSIL™ US-CF 2403 Resin is a methyl-methoxy functional, solvent-less and low molecular weight liquid siloxane. It can be used as a sole binder or in combination with organic resins, in both clear and pigmented formulations. | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones | DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for sil...view more DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for silicone resin based coatings, and can be used with alkyd coatings. view less | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones | DOWSIL™ Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| IMSIL® 1240 | Sibelco | IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durabi...view more IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.2 microns. view less | |
| IMSIL® A-10 | Sibelco | IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability ov...view more IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 2.4 microns. view less | |
| IMSIL® A-15 | Sibelco | IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, dura...view more IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 3.5 microns. view less | |
| IMSIL® A-25 | Sibelco | IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 5.0 microns. view less | |
| IMSIL® A-30 | Sibelco | IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 8.1 microns. view less | |
| IMSIL® A-45 | Sibelco | IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.7 microns. view less | |
| IMSIL® A-75 | Sibelco | IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weatherin...view more IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 11.3 microns. view less | |
| IMSIL® A-8 | Sibelco | IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering...view more IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 2.1 microns. view less | |
| MINEX® 10 | Sibelco | MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product ha...view more MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 2.1 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® 10 (Tamms, Il.) | Sibelco | MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...view more MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 2.1 microns. view less | |
| MINEX® 12 (Tamms, Il.) | Sibelco | MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...view more MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 1.5 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® 2 | Sibelco | MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 14.3 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® 3 | Sibelco | MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 10.8 microns. view less | |
| MINEX® 4 | Sibelco | MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 6.8 microns. view less | |
| MINEX® 7 | Sibelco | MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 3.5 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-16 | Sibelco | MINEX® IG-16 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it may impart many of the benefits of micronized MINEX grades, such as tint retention, w...view more MINEX® IG-16 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it may impart many of the benefits of micronized MINEX grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 900 microns. view less | |
| MINEX® IG-20 | Sibelco | MINEX® IG-20 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it will impart many of the benefits of micronized MINEX grades, such as tint retention, ...view more MINEX® IG-20 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it will impart many of the benefits of micronized MINEX grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 600 microns. view less | |
| MINEX® IG-25 | Sibelco | MINEX® IG-25 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-25 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 550 microns. view less | |
| MINEX® IG-35 | Sibelco | MINEX® IG-35 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-35 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 268 microns. view less | |
| MINEX® IG-40 | Sibelco | MINEX® IG-40 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-40 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 265 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-50 | Sibelco | MINEX® IG-50 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-50 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 225 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-56 | Sibelco | MINEX® IG-56 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding t...view more MINEX® IG-56 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. It has a median particle size of 125 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-60 | Sibelco | MINEX® IG-60 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding t...view more MINEX® IG-60 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. It has a median particle size of 120 microns and is easily dispersed in all conventional vehicle systems. view less | |
| ROYALE® A | Sibelco | ROYALE® A mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and parti...view more ROYALE® A mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and particle size distribution, this product arrives ready for use without additional processing, screening or aging. It has a brightness value of 70.0. view less | |
| ROYALE® C-60 | Sibelco | ROYALE® C-60 mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. This product arrives ready for use without a...view more ROYALE® C-60 mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. This product arrives ready for use without additional processing, screening or aging. It has a brightness value of 77.0. view less | |
| ROYALE® R | Sibelco | ROYALE® R mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and parti...view more ROYALE® R mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and particle size distribution, this product arrives ready for use without additional processing, screening or aging. It has a brightness value of 79.0-80.0. view less | |
| SILVERBOND® 140 (Troy Grove, IL.) | Sibelco | SILVERBOND® 140 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low s...view more SILVERBOND® 140 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low surface area and hardness offers a minimal oil absorption for high loading and stiffening of elastomerics, high performance epoxies and cementitious systems. This product has a mean particle size of 22.5µm. view less | |
| SILVERBOND® 200 (Troy Grove, IL.) | Sibelco | SILVERBOND® 200 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low s...view more SILVERBOND® 200 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low surface area and hardness offers a minimal oil absorption for high loading and stiffening of elastomerics, high performance epoxies and cementitious systems. This product has a mean particle size of 19.6µm. view less | |
| SILVERBOND® 200M (Cleburne, TX.) | Sibelco | SILVERBOND® 200M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 200M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 3258 cm²/g. view less | |
| SILVERBOND® 270M (Cleburne, TX.) | Sibelco | SILVERBOND® 270M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 270M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 3605 cm²/g and is completely inert and pH neutral. view less | |
| SILVERBOND® 300 (Troy Grove, IL.) | Sibelco | SILVERBOND® 300 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...view more SILVERBOND® 300 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a mean particle size of 16.6µm. view less | |
| SILVERBOND® 325 (Troy Grove, IL.) | Sibelco | SILVERBOND® 325 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...view more SILVERBOND® 325 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a mean particle size of 12.5µm. view less | |
| SILVERBOND® 325M (Cleburne, TX.) | Sibelco | SILVERBOND® 325M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 325M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 4825 cm²/g and is completely inert and pH neutral. view less |
