| Agrocer® Blue 153 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Blue 153 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning o...view more Agrocer® Blue 153 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Blue 153 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. view less | Request Sample |
| Agrocer® Green 007 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Green 007 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning ...view more Agrocer® Green 007 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Green 007 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. view less | Request Sample |
| Agrocer® Red 112 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Red 112 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of...view more Agrocer® Red 112 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Red 112 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. In comparison to Pigment Red 48:2, Agrocer® Red 112 disp. exhibits superior compatibility in pesticide formulations and seed coatings. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. view less | Request Sample |
| Agrocer® Red 482 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Red 482 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of...view more Agrocer® Red 482 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Red 482 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. view less | Request Sample |
| Agrocer® Violet 023 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Violet 023 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning...view more Agrocer® Violet 023 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Violet 023 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. Agrocer® Violet 023 disp. gives very attractive color shades and seeds a high-quality appearance. All Agrocer dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. view less | Request Sample |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...view more Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. view less | |
| Akuabrid HM 1153 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 1153 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 2124 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 2124 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 4001 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 4001 is a high modulus, solvent-free, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good water resistance and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 6552A | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ide...view more Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. view less | |
| Akuabrid HM 6560 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...view more Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. view less | |
| Akuabrid HM 6574 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...view more Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. view less | |
| Akuabrid HS 019 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 019 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid HS 070 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 070 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...view more Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. view less | |
| Akuacure 1070N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 1070N is an anti-yellowing, water dispersible polyisocyanate featuring good hand mixing characteristics, high efficiency, and good chemical resistance. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 1073N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 1073N is an anti-yellowing, water dispersible polyisocyanate featuring very easy hand mixing characteristics and high efficiency. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 3100F | T&L Co., Ltd. Polymer Technology Centre | Akuacure 3100F is a per-fluorine modified, water dispersible polyisocyanate featuring reduced surface tension and excellent water resistance. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 3300FN | T&L Co., Ltd. Polymer Technology Centre | Akuacure 3300FN is a per-fluorine modified, water dispersible polyisocyanate featuring reduced surface tension and excellent water resistance. This product is ideal for use in adhesive applications. | |
| Akuacure 4000N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 4000N is a high performance, anti-yellowing, water dispersible polyisocyanate featuring fine particle size. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 4002B | T&L Co., Ltd. Polymer Technology Centre | Akuacure 4002B is a water-dispersible blocked isocyanate ideal for use in 1K baking system applications - including adhesives, paints, and coatings. | |
| Akuacure 8004N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 8004N is a high performance, anti-yellowing, water dispersible polyisocyanate ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 8100N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 8100N is a high performance, anti-yellowing, water dispersible polyisocyanate ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 8103N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 8103N is a high performance, anti-yellowing, water dispersible polyisocyanate featuring fast drying. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure W3000 | T&L Co., Ltd. Polymer Technology Centre | Akuacure W3000 is a per-fluorine modified, water dispersible, blocked isocyanate featuring reduced surface tension and excellent water resistance. This product is ideal for use in 1K baking system applications - including adhesives, paints, and coatings. | |
| Akuapol AL 2200 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2200 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2300 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2300 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2400 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2400 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 4500 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 4500 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuarane CRP 3300 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 3300 is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
| Akuarane CRP 3500A | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 3500A is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
| Akuarane CRP 7005B | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 7005B is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
| Akuarane CRP SR 1310 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1310 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
| Akuarane CRP SR 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1330 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
| Akuarane DTP 1322 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives. | |
| Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...view more Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. view less | |
| Aquanyl Blue AN 500 - Pigment Blue 15:0 | Clariant Plastics and Coatings (Dispersions) | Aquanyl Blue AN 500 is a water-based dispersion of Pigment Blue 15:0. It is binder-free, solvent-free and based on nonionic and / or anionic wetting and dispersing agents. Recommended for water-based paints and coatings. | Request Sample |
| Aquanyl® Red D3GD 500 - Pigment Red 254 | Clariant Plastics and Coatings (Dispersions) | Aquanyl® Red D3GD 500 is an aqueous pigment dispersion recommended for water-based coatings and paints. | Request Sample |
| Aquanyl Yellow YT 100 - Pigment Yellow 65 | Clariant Plastics and Coatings (Dispersions) | Aquanyl Yellow YT 100 is an aqueous pigment dispersion recommended for water-based coatings. | Request Sample |
| Colanyl Black N 131 - MX - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Black N 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the ...view more Colanyl Black N 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. view less | Request Sample |
| Colanyl Black N 500 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main app...view more Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Black N 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Black N 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Black N 500 has to be checked in the customer paint system itself. view less | Request Sample |
| Colanyl Blue A2R 131 - Pigment Blue 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A2R 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its...view more Colanyl Blue A2R 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. view less | Request Sample |
| Colanyl Blue A2R 500 - Pigment Blue 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main ap...view more Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Blue A2R 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Blue A2R 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Blue A2R 500 has to be checked in the customer paint system itself. By using Colanyl Blue A2R 500 in automatic and manual dispensers, excellent accuracy and reliability when poured or pumped have been observed. Furthermore, Colanyl Blue A2R 500 is miscible in all proportions with other Colanyl 500 preparations. By adding Colanyl Extender MS 530, the color strength of Colanyl Blue A2R 500 can be adjusted. view less | Request Sample |
| Colanyl Blue A4R 130-MX - Pigment 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A4R 130-MX is a pigment dispersion based on phthalocyanine blue for water-based coatings. | Request Sample |
| Colanyl Blue B2G 131 - Pigment Blue 15:3 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue B2G 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its...view more Colanyl Blue B2G 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. view less | Request Sample |
| Colanyl Carmine FBB 133-MX - Pigment Red 146 | Clariant Plastics and Coatings (Dispersions) | Colanyl Carmine FBB 133-MX is an aqueous pigment dispersion based on PR 146 for water-based coatings. | Request Sample |
| Colanyl Extender MS 530 - Filler | Clariant Plastics and Coatings (Dispersions) | Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC...view more Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* view less | Request Sample |
| Colanyl Green GG 500 - Pigment Green 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Green GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Oxide Black B 530 - Pigment Black 11 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.*...view more Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* view less | Request Sample |
| Colanyl Oxide Black IR 500 - Pigment Green 17 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative co...view more Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings.* Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water based, VOC-free and VOC-low decorative coatings. view less | Request Sample |
| Colanyl Oxide Blue COR 530 - Pigment Blue 28 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Blue COR 530 VP3210 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Green G 530 - Pigment Green 17 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Green G 530 VP 3834 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings....view more Colanyl Oxide Green G 530 VP 3834 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* view less | Request Sample |
| Colanyl Oxide Red B 530 - Pigment Red 101 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Red B 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Red G 530 - Pigment Red 101 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Red G 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Yellow BV 530 - Pigment Yellow 184 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow BV 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coating.* | Request Sample |
| Colanyl Oxide Yellow CR 530 - Pigment Brown 24 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow CR 530 VP3198 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings...view more Colanyl Oxide Yellow CR 530 VP3198 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* view less | Request Sample |
| Colanyl Oxide Yellow R 132 - MX - Pigment Yellow 42 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow R 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because ...view more Colanyl Oxide Yellow R 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. view less | Request Sample |
| Colanyl Oxide Yellow R 531- Pigment Yellow 42 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow R 531 VP 3888 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative co...view more Colanyl Oxide Yellow R 531 VP 3888 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings. view less | Request Sample |
| Colanyl Pink E-WD 530 VP 5275 - Pigment Red 122 | Clariant Plastics and Coatings (Dispersions) | Colanyl Pink E-WD 530 VP 5275 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red D3GD 500 - Pigment Red 254 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red D3GD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red E3B 500 - Pigment Violet 19 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red E3B 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red E3B 500-MX - Pigment Violet 19 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red E3B 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red F5RK 130 - MX - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red F5RK 130 is an aqueous pigment dispersion based on PR 170 for water-based coatings. | Request Sample |
| Colanyl Red F5RK 500 - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red F5RK 500 is a binder- and solvent-free, aqueous pigment preparation of Pigment Red 170 and based on nonionic and/or anionic wetting and dispersing agents. Recommended for water-based coatings. | Request Sample |
| Colanyl Red FGR 530 - Pigment Red 112 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red FGR 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red FGRG 130 - MX - Pigment Red 112 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red FGRG 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the...view more Colanyl Red FGRG 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. view less | Request Sample |
| Colanyl Red GG 131 - Pigment Orange 5 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red GG 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the m...view more Colanyl Red GG 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. view less | Request Sample |
| Colanyl Red GG 500 - Pigment Orange 5 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red HF3S 500 - Pigment Red 188 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red HF3S 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Scarlet GO 530 - Pigment Red 168 | Clariant Plastics and Coatings (Dispersions) | Colanyl Scarlet GO 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Violet RL 131 - Pigment Violet 23 | Clariant Plastics and Coatings (Dispersions) | Colanyl Violet RL 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of th...view more Colanyl Violet RL 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. view less | Request Sample |
| Colanyl Violet RL 530 - Pigment Violet 23 | Clariant Plastics and Coatings (Dispersions) | Colanyl Violet RL 530 VP 5335 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl White R 500 - Pigment White 6 | Clariant Plastics and Coatings (Dispersions) | Colanyl White R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl White RN 500 - MX - Pigment White 6 | Clariant Plastics and Coatings (Dispersions) | Colanyl White RN 500-MX is a very low VOC, water-based pigment preparation of Pigment White 6. It is binder-free, solvent-free and based on nonionic and/or anionic wetting and dispersing agents. Recommended for water-based paints and coatings. | Request Sample |
| Colanyl Yellow 2GXD 130 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 2GXD 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of ...view more Colanyl Yellow 2GXD 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. view less | Request Sample |
| Colanyl Yellow 2GXD 500 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 2GXD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow 5GX 500 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 5GX 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow FGL 500 - Pigment Yellow 97 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow FGL 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow G 132 - Pigment Yellow 1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow G 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the...view more Colanyl Yellow G 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. view less | Request Sample |
| Colanyl Yellow H3G 500 - Pigment Yellow 154 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow H3G 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow HRD 500 - Pigment Yellow 83 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow HRD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Ekosol ES 1000 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synth...view more Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synthetic leather coatings. view less | |
| Ekosol ES 1500T | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1500T is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and high transparency. This product is ideal for use in direct screen printing ink applications. | |
| Ekosol ES 2500 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applicat...view more Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applications. view less | |
| Ekosol ES 2600 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications...view more Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications. view less | |
| Ekosol ES 3450A | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...view more Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. view less | |
| Ekosol ES 5300W | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...view more Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. view less | |
| Frotect FT-1100 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-1100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays good water repellency, hydrolytic stability, surface characteristics, color deepening, and defoaming pr...view more Frotect FT-1100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays good water repellency, hydrolytic stability, surface characteristics, color deepening, and defoaming properties. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-1200 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-1200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good defoaming properties, excellent surface characteristics, and good water repellency, hydrolyti...view more Frotect FT-1200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good defoaming properties, excellent surface characteristics, and good water repellency, hydrolytic stability, and color deepening. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-2100 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-2100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency, excellent surface characteristics, and good hydrolytic stability, color dee...view more Frotect FT-2100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency, excellent surface characteristics, and good hydrolytic stability, color deepening, and defoaming properties. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-2200 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-2200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency and defoaming properties, excellent surface characteristics, and good hydrol...view more Frotect FT-2200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency and defoaming properties, excellent surface characteristics, and good hydrolytic stability and color deepening. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-3000 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-3000 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and color deepening, excellent water repellency and defoaming properties...view more Frotect FT-3000 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and color deepening, excellent water repellency and defoaming properties, and good surface characteristics. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-4000 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-4000 is is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and defoaming properties, excellent water repellency and surface char...view more Frotect FT-4000 is is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and defoaming properties, excellent water repellency and surface characteristics, and good color deepening. This product is ideal for use in artificial leather and coating applications. view less | |
| Hostafine Black T 30 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Hostafine Black T 30 is a pigment dispersion of approx. 30% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives an excellent...view more Hostafine Black T 30 is a pigment dispersion of approx. 30% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives an excellent gloss, transparency and sedimentation properties in aqueous systems. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. view less | Request Sample |
| Hostafine Black TS 30 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Hostafine Black TS 30 is a pigment dispersion of approx. 33% pigment and is based on nonionic dispersing and wetting agents and is glycolfree. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives very...view more Hostafine Black TS 30 is a pigment dispersion of approx. 33% pigment and is based on nonionic dispersing and wetting agents and is glycolfree. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. Mainly used in stationery, shoe care products and woodstains. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. view less | Request Sample |
| Hostafine Blue B2G - Pigment Blue 15:3 | Clariant Plastics and Coatings (Dispersions) | Hostafine Blue B2G is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Blue 15:3. The extremly low particle size distribution gives very good gl...view more Hostafine Blue B2G is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Blue 15:3. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. Suitable for stationery, woodstains, latex, viscose fibres, detergents. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. view less | Request Sample |
| Hostafine Brown HFR - Pigment Brown 25 | Clariant Plastics and Coatings (Dispersions) | Hostafine Brown HFR is an ultra fine pigment dispersion based on benzimidazolone brown for water-based coatings, inks and emulsions. | Request Sample |
| Hostafine Green GN - Pigment Green 7 | Clariant Plastics and Coatings (Dispersions) | Hostafine Green GN is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Green 7. The extremly low particle size distribution gives very good glos...view more Hostafine Green GN is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Green 7. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. It is suitable for stationery, woodstains, latex, viscose fibres and detergents. view less | Request Sample |
| Hostafine Magenta E - Pigment Red 122 | Clariant Plastics and Coatings (Dispersions) | Hostafine Magenta E is a pigment dispersion of approx. 20% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 122. The extremly low particle size distribution gives very good glo...view more Hostafine Magenta E is a pigment dispersion of approx. 20% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 122. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. It is suitable for ink jet inks, stationery, woodstains, latex, viscose fibres and detergents. view less | Request Sample |
| Hostafine Red F5RK - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Hostafine Red F5RK is a pigment preparation of approx. 35% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 170. The extremly low particle size distribution gives very good glo...view more Hostafine Red F5RK is a pigment preparation of approx. 35% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 170. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. It is suitable for woodstains, stationery and shoe polishes. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. view less | Request Sample |
