| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. view less | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...view more Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. view less | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...view more Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. view less | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...view more Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. view less | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...view more Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. view less | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...view more Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. view less | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...view more Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. view less | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...view more Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. view less | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...view more Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. view less | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...view more Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. view less | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...view more Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. view less | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...view more Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. view less | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...view more Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. view less | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...view more Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. view less | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...view more Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...view more Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...view more Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. view less | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. view less | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...view more Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. view less | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...view more Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. view less | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...view more Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. view less | |
| Flytac 188-C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300...view more Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300-3000. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-C9 has a softening point (B&R) of 90-140°C, an acid value of 0.5mg KOH/g max., and an ash amount of 0.1% max. view less | |
| Flytac 188-C9-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9-100 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between...view more Flytac 188-C9-100 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between 300-3000. It is used as an important raw material for the production of paints, adhesives, rubber & inks industries. This product has a softening point (B&R) of 91.0-100.0°C, an acid value of 0.5mg KOH/g max., a specific gravity of 1.06-1.09g/cm^3, and an ash level of 0.1% max. view less | |
| Flytac 188-C9-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9-110 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between...view more Flytac 188-C9-110 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between 300-3000. This product is used as an important raw material for the production of paints, adhesives, rubber & inks industries. This product has a softening point (B&R) of 101.0-110.0°C, an acid value of 0.5mg KOH/g max., a specific gravity of 1.06-1.09g/cm^3, and an ash level of 0.1% max. view less | |
| Flytac 188-C9-120 | Guangzhou Flying Dragon Chemical Ltd. | C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between 300-3000. It i...view more C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between 300-3000. It is used as an important raw material for the production of paints, adhesives, rubber & inks industries. This product has a softening point (B&R) of 111.0-120.0°C, an acid value of 0.5mg KOH/g max., a specific gravity of 1.06-1.09g/cm^3, and an ash level of 0.1% max. view less | |
| Flytac 188-C9-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9-130 has a softening point (B&R) of 121.0-130.0°C, an acid value of 0.5mg KOH/g max., a specific gravity of 1.06-1.09g/cm^3, and an ash level of 0.1% max. The hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products...view more Flytac 188-C9-130 has a softening point (B&R) of 121.0-130.0°C, an acid value of 0.5mg KOH/g max., a specific gravity of 1.06-1.09g/cm^3, and an ash level of 0.1% max. The hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between 300-3000. It is used as an important raw material for the production of paints, adhesives, rubber & inks industries. view less | |
| Flytac 188-C9-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9-140 has a softening point (B&R) of 131.0-140.0°C, an acid value of 0.5mg KOH/g max., a specific gravity of 1.06-1.09g/cm^3, and an ash level of 0.1% max. The hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products...view more Flytac 188-C9-140 has a softening point (B&R) of 131.0-140.0°C, an acid value of 0.5mg KOH/g max., a specific gravity of 1.06-1.09g/cm^3, and an ash level of 0.1% max. The hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between 300-3000. It is used as an important raw material for the production of paints, adhesives, rubber & inks industries. view less | |
| Flytac 188-HC5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color re...view more Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-HC5 has a softening point (B&R) of 95-105°Cg, an acid value of 0.5mg KOH/g max., and an ash amount of 0.02% max. view less | |
| Flytac 197-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made especially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac 197-105 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac 197-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac 197-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceed...view more Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product also has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. view less | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...view more Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. view less | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...view more Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. view less | |
| IMSIL® 1240 | Sibelco | IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durabi...view more IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.2 microns. view less | |
| IMSIL® A-10 | Sibelco | IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability ov...view more IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 2.4 microns. view less | |
| IMSIL® A-15 | Sibelco | IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, dura...view more IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 3.5 microns. view less | |
| IMSIL® A-25 | Sibelco | IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 5.0 microns. view less | |
| IMSIL® A-30 | Sibelco | IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 8.1 microns. view less | |
| IMSIL® A-45 | Sibelco | IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.7 microns. view less | |
| IMSIL® A-75 | Sibelco | IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weatherin...view more IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 11.3 microns. view less | |
| IMSIL® A-8 | Sibelco | IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering...view more IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 2.1 microns. view less | |
| MINEX® 10 | Sibelco | MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product ha...view more MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 2.1 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® 10 (Tamms, Il.) | Sibelco | MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...view more MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 2.1 microns. view less | |
| MINEX® 12 (Tamms, Il.) | Sibelco | MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...view more MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 1.5 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® 2 | Sibelco | MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 14.3 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® 3 | Sibelco | MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 10.8 microns. view less | |
| MINEX® 4 | Sibelco | MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 6.8 microns. view less | |
| MINEX® 7 | Sibelco | MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 3.5 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-16 | Sibelco | MINEX® IG-16 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it may impart many of the benefits of micronized MINEX grades, such as tint retention, w...view more MINEX® IG-16 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it may impart many of the benefits of micronized MINEX grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 900 microns. view less | |
| MINEX® IG-20 | Sibelco | MINEX® IG-20 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it will impart many of the benefits of micronized MINEX grades, such as tint retention, ...view more MINEX® IG-20 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it will impart many of the benefits of micronized MINEX grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 600 microns. view less | |
| MINEX® IG-25 | Sibelco | MINEX® IG-25 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-25 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 550 microns. view less | |
| MINEX® IG-35 | Sibelco | MINEX® IG-35 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-35 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 268 microns. view less | |
| MINEX® IG-40 | Sibelco | MINEX® IG-40 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-40 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 265 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-50 | Sibelco | MINEX® IG-50 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-50 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 225 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-56 | Sibelco | MINEX® IG-56 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding t...view more MINEX® IG-56 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. It has a median particle size of 125 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-60 | Sibelco | MINEX® IG-60 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding t...view more MINEX® IG-60 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. It has a median particle size of 120 microns and is easily dispersed in all conventional vehicle systems. view less | |
| ROYALE® A | Sibelco | ROYALE® A mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and parti...view more ROYALE® A mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and particle size distribution, this product arrives ready for use without additional processing, screening or aging. It has a brightness value of 70.0. view less | |
| ROYALE® C-60 | Sibelco | ROYALE® C-60 mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. This product arrives ready for use without a...view more ROYALE® C-60 mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. This product arrives ready for use without additional processing, screening or aging. It has a brightness value of 77.0. view less | |
| ROYALE® R | Sibelco | ROYALE® R mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and parti...view more ROYALE® R mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and particle size distribution, this product arrives ready for use without additional processing, screening or aging. It has a brightness value of 79.0-80.0. view less | |
| SILVERBOND® 140 (Troy Grove, IL.) | Sibelco | SILVERBOND® 140 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low s...view more SILVERBOND® 140 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low surface area and hardness offers a minimal oil absorption for high loading and stiffening of elastomerics, high performance epoxies and cementitious systems. This product has a mean particle size of 22.5µm. view less | |
| SILVERBOND® 200 (Troy Grove, IL.) | Sibelco | SILVERBOND® 200 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low s...view more SILVERBOND® 200 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low surface area and hardness offers a minimal oil absorption for high loading and stiffening of elastomerics, high performance epoxies and cementitious systems. This product has a mean particle size of 19.6µm. view less | |
| SILVERBOND® 200M (Cleburne, TX.) | Sibelco | SILVERBOND® 200M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 200M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 3258 cm²/g. view less | |
| SILVERBOND® 270M (Cleburne, TX.) | Sibelco | SILVERBOND® 270M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 270M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 3605 cm²/g and is completely inert and pH neutral. view less | |
| SILVERBOND® 300 (Troy Grove, IL.) | Sibelco | SILVERBOND® 300 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...view more SILVERBOND® 300 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a mean particle size of 16.6µm. view less | |
| SILVERBOND® 325 (Troy Grove, IL.) | Sibelco | SILVERBOND® 325 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...view more SILVERBOND® 325 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a mean particle size of 12.5µm. view less | |
| SILVERBOND® 325M (Cleburne, TX.) | Sibelco | SILVERBOND® 325M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 325M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 4825 cm²/g and is completely inert and pH neutral. view less | |
| SILVERBOND® 325M (Lugoff, SC.) | Sibelco | SILVERBOND® 325M (Lugoff, SC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 325M (Lugoff, SC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product is completely inert and will not degrade when employed in extreme temperatures or harsh environments. It has a median particle size of 15.3µm. view less | |
| SILVERBOND® 325M (Marston, NC.) | Sibelco | SILVERBOND® 325M (Marston, NC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...view more SILVERBOND® 325M (Marston, NC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product is completely inert and will not degrade when employed in extreme temperatures or harsh environments. view less | |
| SNOBRITE® 60 (Mcintyre, GA) | Sibelco | SNOBRITE® 60 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resist...view more SNOBRITE® 60 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 34% passes through a sieve of <.5 microns. It has a median particle size of 1.2µ. view less | |
| SNOBRITE® 68 (Mcintyre, GA) | Sibelco | SNOBRITE® 68 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resist...view more SNOBRITE® 68 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 40% passes through a sieve of <.5 microns. It has a median particle size of 0.9µ. view less | |
| SNOBRITE® 75 (Mcintyre, GA) | Sibelco | SNOBRITE® 75 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resist...view more SNOBRITE® 75 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 50% passes through a sieve of <.5 microns. It has a median particle size of 0.5µ. view less | |
| SNOBRITE® 75HB (Mcintyre, GA) | Sibelco | SNOBRITE® 75HB (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resi...view more SNOBRITE® 75HB (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 56% passes through a sieve of <.5 microns. It has a median particle size of 0.5µ. view less |
