| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| Cinergi™ 2022 A | Lawter | Cinergi™ 2022 A is a proprietary gloss varnish that has the benefit of a soft gel body and is 100% non-volatile. It has a linseed oil base and is ideally suited for use in sheet-fed ink applications. | |
| Flexonic™ 601 A | Lawter | Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming ...view more Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming without impacting on water resistance or contributing to incompatibility. Flexonic™ 601 A is suited for use in aqueous flexographic and gravure inks and in aqueous paper, metal, wood and OPV coatings. view less | |
| Flexonic™ 902 A | Lawter | Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foa...view more Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foaming without impacting on incompatibility or water resistance. Flexonic™ 902 A is suited for use in aqueous flexographic and gravure inks and in aqueous wood, paper, metal and OPV coatings. view less | |
| Halex™ A | Lawter | Halex™ A is a water and alcohol repellent sheet-fed gloss varnish that has been modified for high water repellence. Its high tack can be reduced using small amounts of aliphatic diluents or drying oil. It offers the benefit of good gloss and rub resistanc...view more Halex™ A is a water and alcohol repellent sheet-fed gloss varnish that has been modified for high water repellence. Its high tack can be reduced using small amounts of aliphatic diluents or drying oil. It offers the benefit of good gloss and rub resistance in ink formulations that use the product. It is considered a water-fighting varnish with applications in sheet-fed and letterpress inks. view less | |
| Miraglaze™ 2540 A | Lawter | Miraglaze™ 2540 A is a sheet-fed overprint varnish that has good "stay open" and press stability properties on the press, essential during interrupted press runs. It has driers and waxes that are either dry trapped or wet. The benefits of Miraglaze™ 2540 ...view more Miraglaze™ 2540 A is a sheet-fed overprint varnish that has good "stay open" and press stability properties on the press, essential during interrupted press runs. It has driers and waxes that are either dry trapped or wet. The benefits of Miraglaze™ 2540 A are its tack stability, "stay open" properties and free-flow ability. Applications include overprints, specifically wet and dry traps and non-imprintable systems. view less | |
| Miraglaze™ 8614 A | Lawter | Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with...view more Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with minimal yellow and good rub characteristics. It also has ink driers and wax to enhance the formation of necessary print properties, making it suitable for use in overprints and wet or dry trapped applications. view less | |
| Optilith™ 1486 A | Lawter | Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optil...view more Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optilith™ 1486 A is recommended for use in heatset offset and sheet-fed offset inks. view less | |
| Optilith™ 3094 A | Lawter | Optilith™ 3094 A is an anti-oxidant solution developed for heatset inks where skin formation in the inks would be harmful because of the potential contamination of delivery pipes and ink pumps that feed the ink fountains at the press. The product is usefu...view more Optilith™ 3094 A is an anti-oxidant solution developed for heatset inks where skin formation in the inks would be harmful because of the potential contamination of delivery pipes and ink pumps that feed the ink fountains at the press. The product is useful in heatset inks where metallic driers might be needed to attain the necessary squalene resistance. Apart from uses in heatset inks, Optilith™ 3094 A can be used in sheet-fed inks, although at lower levels. view less | |
| Optilith™ 4 A | Lawter | Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for ...view more Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for use in heatset and sheet-fed offset inks and in flushing vehicles. view less | |
| Optilith™ AM A | Lawter | Optilith™ AM A is an anti-mist compound that is 95% non-volatile and in the form of a high solids paste. It offers maximum reduction in misting without any bad effect on ink rheology or gloss. Optilith™ AM A is suitable for use in heatset offset, sheet-fe...view more Optilith™ AM A is an anti-mist compound that is 95% non-volatile and in the form of a high solids paste. It offers maximum reduction in misting without any bad effect on ink rheology or gloss. Optilith™ AM A is suitable for use in heatset offset, sheet-fed offset inks and in metal deco and OPV applications. view less | |
| Optilith™ TRG A | Lawter | Optilith™ TRG A is a non-volatile gelled tack reducer that decreases the initial tack without "destroying" the rheological properties of ink. It also flattens the tack curve providing better transfer and tack stability. Optilith™ TRG A is suitable for use...view more Optilith™ TRG A is a non-volatile gelled tack reducer that decreases the initial tack without "destroying" the rheological properties of ink. It also flattens the tack curve providing better transfer and tack stability. Optilith™ TRG A is suitable for use in all oil-based offset inks including sheet-fed, heatset and web no-heat applications. view less | |
| Polysperse™ A | Lawter | Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resista...view more Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resistance and gloss. Polysperse™ A is suitable for use in flexographic and gravure inks, heatset and sheet-fed inks and in UV and metal decorating inks. view less | |
| Stirinol™ 97 A | Lawter | Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset in...view more Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset inks and hot foil stamping applications. view less | |
| Stirinol™ 98 A | Lawter | Stirinol™ 98 A is a heatset wax compound to give good rub and slip in heatset inks used to print catalogs, tabloids and publication inserts. It disperses easily, retains gloss and has good re-crystallization resistance. Stirinol™ 98 A is suitable for use ...view more Stirinol™ 98 A is a heatset wax compound to give good rub and slip in heatset inks used to print catalogs, tabloids and publication inserts. It disperses easily, retains gloss and has good re-crystallization resistance. Stirinol™ 98 A is suitable for use in heatset offset inks and in hot foil stamping applications. view less | |
| Tytan AP20 (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AP20 is primarily designed to strongly increase adhesion of solvent based inks/coatings to a variety of plastics used for food packaging or other purposes. It also improves pigment distribution and heat sealing resistance, allowing perfect hiding po...view more Tytan AP20 is primarily designed to strongly increase adhesion of solvent based inks/coatings to a variety of plastics used for food packaging or other purposes. It also improves pigment distribution and heat sealing resistance, allowing perfect hiding power and appearance of printing on otherwise problematic substrates. view less | |
| Tytan AQ33 (Water-borne Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AQ33 can be used as an adhesion promoter or cross linking agent. It is recommended for water-borne coatings in base environments on various surfaces. | |
| Tytan AQ5000 (Water-borne Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the...view more Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the performance when the water content is increased in the system. Tytan AQ5000 can be used as an adhesion promoter or cross linking agent for water-borne coatings in acid environments on various surfaces. view less | |
| Tytan AQZ30 (Zirconate Crosslinker) | Borica Co., Ltd. | Tytan AQZ30 has the ability to work as adhesion promoter and crosslinking agent. This product is recommended for water-borne and solvent-borne inks. | |
| Tytan BIP15 (Titanate Mixture) | Borica Co., Ltd. | Tytan BIP15 is a mixture of tetra isopropyl titanate and tetra n-butyl titanate at 85-15 ratio. It works as adhesion promoter, crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan CP-219 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-219 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. | |
| Tytan CP-317 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-317 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in an organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the mechanical propert...view more Tytan CP-317 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in an organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the mechanical property. view less | |
| Tytan CP-318 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-318 is a solid material and can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining t...view more Tytan CP-318 is a solid material and can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. view less | |
| Tytan CP-326 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-326 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. | |
| Tytan CX100 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX100 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan CX200 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX200 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan CX400 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX400 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan EHT (Tetra 2-Ethylhexyl Titanate) | Borica Co., Ltd. | Tytan EHT is used in a variety of industrial applications as an adhesion promoter and as a crosslinking agent. It is commonly used for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan ET (Tetra Ethyl Titanate) | Borica Co., Ltd. | Tytan ET is used in a variety of industrial applications as an adhesion promoter, as a crosslinking agent. It is commonly used for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan PBT (Titanate Crosslinker) | Borica Co., Ltd. | Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resi...view more Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint containing Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dries, it can stand up to 600 oC. view less | |
| Tytan S2 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of sil...view more Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of silicone base ink. view less | |
| Tytan S22 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rat...view more Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rate of silicone base ink. view less | |
| Tytan S6 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increa...view more Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increase the curing rate of silicone base ink. view less | |
| Tytan TAA (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-i...view more Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-improvement properties which makes it very suitable to strongly improve performance properties of industrial coatings on difficult modern polymeric substrates, glass and some metals. view less | |
| Tytan TET (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane syste...view more Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane systems. view less | |
| Tytan TIPT (Tetra Isopropyl Titanate) | Borica Co., Ltd. | Tytan TIPT can be used as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. It is most suitable for use in the glass and glass fiber manufacturing. | |
| Tytan TNBT (Tetra N-Butyl Titanate) | Borica Co., Ltd. | Tytan TNBT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNBZ (Tetra N-Butyl Zirconate) | Borica Co., Ltd. | Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNPT (Tetra N-Propyl Titanate) | Borica Co., Ltd. | Tytan TNPT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNPZ (Tetra N-Propyl Zirconate) | Borica Co., Ltd. | Tytan TNPZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan X85 (Titanate Crosslinker) | Borica Co., Ltd. | Tytan X85 is used as a cross linking agent for hydroxylic compounds. It is also used as a component of heat and corrosion resistant paints. | |
| Uroset™ 100S A | Lawter | Uroset™ 100S A is a universal oil base dispersion vehicle serving as a universal base for any letterpress oil ink formations or offsets. It offers the ability to carry high pigment concentrations while delivering gloss. The product dries quickly by oxidat...view more Uroset™ 100S A is a universal oil base dispersion vehicle serving as a universal base for any letterpress oil ink formations or offsets. It offers the ability to carry high pigment concentrations while delivering gloss. The product dries quickly by oxidation and forms hard, rub-resistant films when subjected to metallic drier catalysts. It shows stability at high speeds, good transfer and leveling and utilizes more flexible ink film compared to other fast setting vehicles. Uroset™ 100S A is used in sheet-fed and letterpress inks. view less | |
| Uroset™ 9305 A | Lawter | Uroset™ 9305 A is a free-flowing heatset dispersion vehicle that possesses good pigment wetting and flow properties. The product is used in heatset inks and in web offsets for commercial printing purposes. | |
| Uroset™ FGV A | Lawter | Uroset™ FGV A is a fast-setting, sheet-fed flushing and grinding vehicle that possesses good pigment wetting, rub resistance and high gloss features. It is press stable during high speed runs and also displays good transfer and leveling. Uroset™ FGV A pro...view more Uroset™ FGV A is a fast-setting, sheet-fed flushing and grinding vehicle that possesses good pigment wetting, rub resistance and high gloss features. It is press stable during high speed runs and also displays good transfer and leveling. Uroset™ FGV A provides more ink film compared to other fast setting types and is considered ideal in sheet-fed and letterpress inks. view less | |
| Webvar™ 110 A | Lawter | Webvar™ 110 A is a soya-based heavy gel geared towards sheet-fed and web offset applications. It has the benefit of a low tack and high structure resulting in it being suitable for use as a letdown vehicle for mist control and quick-setting. The product p...view more Webvar™ 110 A is a soya-based heavy gel geared towards sheet-fed and web offset applications. It has the benefit of a low tack and high structure resulting in it being suitable for use as a letdown vehicle for mist control and quick-setting. The product promotes good wetting of colored pigments and is ideal for use in heatset web inks and sheetfed inks. view less | |
| Webvar™ 3102 A | Lawter | Webvar™ 3102 A is a rub-resistant heatset cover vehicle that displays a tight gel structure and high viscosity. It also shows medium to heavy gel body with good squalene resistance. The product has rheology that withstands emulsification on all dampening ...view more Webvar™ 3102 A is a rub-resistant heatset cover vehicle that displays a tight gel structure and high viscosity. It also shows medium to heavy gel body with good squalene resistance. The product has rheology that withstands emulsification on all dampening systems. It maintains good press performance at high speeds. Webvar™ 3102 A is suitable for use in heatset inks and on catalogs, brochures and inserts. view less | |
| Webvar™ 9700 A | Lawter | Webvar™ 9700 A is a high-structured heatset gel vehicle with a heavy gel body that offers a short thixotropic ink that keeps good leveling and transfer. It also provides formulation of low tack inks that withstand emulsification. Heatset inks based on the...view more Webvar™ 9700 A is a high-structured heatset gel vehicle with a heavy gel body that offers a short thixotropic ink that keeps good leveling and transfer. It also provides formulation of low tack inks that withstand emulsification. Heatset inks based on the product show good press stability with low temperature drying that ensures the presses can work at top speeds while still providing water balance, high gloss and dot fidelity. view less |
